[PATCH] ARM: Kirkwood: DT board setup for LaPlug

[Jason Cooper]

On Sat, Dec 07, 2013 at 07:56:52PM -0500, Jason Cooper wrote:
> On Sun, Nov 24, 2013 at 12:13:19PM -0500, Jason Cooper wrote:
> > On Sun, Nov 17, 2013 at 02:20:53PM +0100, Sebastian Hesselbarth wrote:
> > > On 11/16/2013 11:08 PM, Maxime Hadjinlian wrote:
> > > >This patch adds DT board setup for the LaCie NAS LaPlug.
> > > 
> > > [adding MVEBU maintainers, please do that always from now on]
> > > 
> > > Maxime,
> > > 
> > > first of all, thanks for providing this. Anyway, I do have some
> > > remarks below.
> > > 
> > > >Chipset list:
> > > >- CPU MARVELL 88FR131 800Mhz
> > > >- SDRAM memory: 128MB DDR2-800 400Mhz
> > > >- 1 Ethernet Gigabit port (PHY MARVELL 88E1318)
> > > >- 1 Mini PCI-Express port
> > > >- 1 NAND 512 MB
> > > >- 1 push button
> > > >- 2 LEDs (red and blue)
> > > >- 4 USB Ports
> > > >
> > > >Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian at gmail.com>
> > > >---
> > > >  arch/arm/boot/dts/Makefile            |   1 +
> > > >  arch/arm/boot/dts/kirkwood-nsplug.dts | 178 ++++++++++++++++++++++++++++++++++
> > > >  2 files changed, 179 insertions(+)
> > > >  create mode 100644 arch/arm/boot/dts/kirkwood-nsplug.dts
> > ...
> > > >+&mdio {
> > > >+  status = "okay";
> > > >+
> > > >+  ethphy0: ethernet-phy at 0 {
> > > >+    device_type = "ethernet-phy";
> > > 
> > > If you know the type of PHY used here, please add
> > > a compatible like "marvell,88e1318s"
> > 
> > Please be aware of the current conversation [1] started by Jason
> > Gunthorpe regarding the compatible string choice here.  Once that's
> > resolved, please resend.
> 
> Looks like we chose to dodge the issue.  Mind resending with the
> a comment identifying the phy?

Well, I was going to take this version and fix up the phy node, but
re-reading the thread I see there were quite a few comments that were
never addressed.  Please resend a V2 if you'd like to add support for
this board.

thx,

Jason.