[PATCH 5/7] clk/samsung: add support for pll2550xx

[Tomasz Figa]

Hi Pankaj, Rahul, Arun,

On Friday 06 of December 2013 21:26:29 Rahul Sharma wrote:
> From: Pankaj Dubey <pankaj.dubey at samsung.com>
> 
> exynos5260 use pll2520xx and it has different bitfields
> for P,M,S values as compared to pll2550xx. Support for
> pll2520xx is added here.
> 
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
> Signed-off-by: Arun Kumar K <arun.kk at samsung.com>
> ---
>  drivers/clk/samsung/clk-pll.c |  107 +++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/samsung/clk-pll.h |    1 +
>  2 files changed, 108 insertions(+)
> 
> diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
> index e8e8953..237a889 100644
> --- a/drivers/clk/samsung/clk-pll.c
> +++ b/drivers/clk/samsung/clk-pll.c
> @@ -710,6 +710,107 @@ struct clk * __init samsung_clk_register_pll2550x(const char *name,
>  	return clk;
>  }
>  
> +/*
> + * PLL2550xx Clock Type
> + */
> +
> +/* Maximum lock time can be 270 * PDIV cycles */
> +#define PLL2550XX_LOCK_FACTOR (270)
> +
> +#define PLL2550XX_MDIV_MASK		(0x3FF)
> +#define PLL2550XX_PDIV_MASK		(0x3F)
> +#define PLL2550XX_SDIV_MASK		(0x7)
> +#define PLL2550XX_LOCK_STAT_MASK	(0x1)
> +#define PLL2550XX_MDIV_SHIFT		(9)
> +#define PLL2550XX_PDIV_SHIFT		(3)
> +#define PLL2550XX_SDIV_SHIFT		(0)
> +#define PLL2550XX_LOCK_STAT_SHIFT	(21)
> +
> +static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
> +				unsigned long parent_rate)
> +{
> +	struct samsung_clk_pll *pll = to_clk_pll(hw);
> +	u32 mdiv, pdiv, sdiv, pll_con;
> +	u64 fvco = parent_rate;
> +
> +	pll_con = __raw_readl(pll->con_reg);
> +	mdiv = (pll_con >> PLL2550XX_MDIV_SHIFT) & PLL2550XX_MDIV_MASK;
> +	pdiv = (pll_con >> PLL2550XX_PDIV_SHIFT) & PLL2550XX_PDIV_MASK;
> +	sdiv = (pll_con >> PLL2550XX_SDIV_SHIFT) & PLL2550XX_SDIV_MASK;
> +
> +	fvco *= mdiv;
> +	do_div(fvco, (pdiv << sdiv));
> +
> +	return (unsigned long)fvco;
> +}
> +
> +static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
> +{
> +	if ((mdiv != ((pll_con >> PLL2550XX_MDIV_SHIFT) &
> +				PLL2550XX_MDIV_MASK)) ||
> +		(pdiv != ((pll_con >> PLL2550XX_PDIV_SHIFT) &
> +				PLL2550XX_PDIV_MASK)))
> +		return 1;
> +	else
> +		return 0;

This doesn't look too good. Can you make this consistent with
implementations of this helper for other PLLs, such as
samsung_pll35xx_mp_change()?

> +}
> +
> +static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
> +					unsigned long prate)
> +{
> +	struct samsung_clk_pll *pll = to_clk_pll(hw);
> +	const struct samsung_pll_rate_table *rate;
> +	u32 tmp;
> +
> +	/* Get required rate settings from table */
> +	rate = samsung_get_pll_settings(pll, drate);
> +	if (!rate) {
> +		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
> +			drate, __clk_get_name(hw->clk));
> +		return -EINVAL;
> +	}
> +
> +	tmp = __raw_readl(pll->con_reg);
> +
> +	if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
> +		/* If only s change, change just s value only*/
> +		tmp &= ~(PLL2550XX_SDIV_MASK << PLL2550XX_SDIV_SHIFT);
> +		tmp |= rate->sdiv << PLL2550XX_SDIV_SHIFT;
> +		__raw_writel(tmp, pll->con_reg);
> +	} else {

Please make coding style of this function consistent with implementations
of this operation for other PLLs, such as samsung_pll35xx_set_rate().

Otherwise the patch looks fine.

Best regards,
Tomasz