[PATCH] omap: twl-common: Fix musb-hdrc device name.

[Belisko Marek]

On Mon, Dec 9, 2013 at 6:50 PM, Tony Lindgren <tony at atomide.com> wrote:
> * Belisko Marek <marek.belisko at gmail.com> [131208 23:36]:
>> Hi Tony,
>>
>> On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren <tony at atomide.com> wrote:
>> > * Belisko Marek <marek.belisko at gmail.com> [131203 01:21]:
>> >> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek <marek.belisko at gmail.com> wrote:
>> >> > Hi,
>> >> >
>> >> > On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I <kishon at ti.com> wrote:
>> >> >> Hi,
>> >> >>
>> >> >> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>> >> >>> Without this change when booting omap3 device (gta04) with board file
>> >> >>> leads to follwing errors:
>> >> >>>
>> >> >>> [    1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy
>> >> >>> [    1.209075] HS USB OTG: no transceiver configured
>> >> >>> [    1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
>> >> >>>
>> >> >>> and usb isn't working.
>> >> >>>
>> >> >>> This is probably regression caused by commit: 6c27f939
>> >> >>
>> >> >> I think a better fix would be to have this merged..
>> >> >> https://lkml.org/lkml/2013/7/26/91
>> >> > Yes I see but how this could help with current situation? Ho you then
>> >> > specify device number?
>> >> I was too fast with reply sorry. I can see whole series and it is of
>> >> course correct solution. But as I said
>> >> can we except to be merged to 3.13. If not Tony can you pick my patch.
>> >
>> > If it's a regression, then let's get it merged for the -rc cycle.
>> Yes it is regression and without that usb on most omap3 based boards
>> without DT will not work.
>> >
>> > So please try to follow up on getting the proper fix merged, meanwhile
>> > I'll mark this thread as read. If you need this one merged for some
>> > reason, then please report to get it back to my radar.
>
> I'm still clueless which USB regression fix to apply for the -rc cycle
> though.. Hoping to see a single patch which clearly states the issue
> and has acks.
Kishon can you please comment on that? Would be possible to get your
patch to 3.13 (I seen some comments from Felipe).
Otherwise I think only possible option to avoid non-working usb in
3.13 for omap is took my patch. Thanks.
>
> Regards,
>
> Tony

BR,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com