[PATCHv0] ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2
jason at lakedaemon.net
Sun Dec 1 17:21:17 EST 2013
On Sat, Nov 30, 2013 at 04:13:44PM +0100, Arnaud Ebalard wrote:
> Almost all hardware parts of the NETGEAR ReadyNAS NV+ v2 ( for more
> details) are supported by mainline kernel. The only missing elements in
> provided .dts file are:
> - the front LCD module (Winstar WINSTAR WH1602): driver development is
> ongoing. This is the same LCD module as on ReadyNAS 104.
> - the Macronix MX25L512 512Kbit SPI flash: no time to play with it yet.
> The device is the big brother (4 vs 2 bay) of the ReadyNAS Duo v2. The
> main differences are some additional LEDs for the disks, a Marvell
> 88SM4140 SATA Port multiplier (no driver required to access the disk)
> and previously described LCD module. Otherwise, it shares the same SoC
> (kirkwood 88F6282), RAM (256MB), NAND (128MB), RTC chip (Ricoh rs5c372a),
> fan controller (GMT G762), XHCI controller (NEC/Renesas µPD720200).
> : http://natisbad.org/NAS5/
> Signed-off-by: Arnaud Ebalard <arno at natisbad.org>
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/kirkwood-netgear_readynas_nv+_v2.dts | 270 +++++++++++++++++++++
> 2 files changed, 271 insertions(+)
> create mode 100644 arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
Applied to mvebu/dt
More information about the linux-arm-kernel