[PATCH 21/26] ARM: shmobile: Lager:add SPI FLASH support on QSPI
Simon Horman
horms+renesas at verge.net.au
Sun Dec 22 21:07:17 EST 2013
From: Hiep Cao Minh <cm-hiep at jinso.co.jp>
This patch enables Spansion S25FL512SAGMFIG11 chip on QSPI,
Add support for the QSPI interface on Lager.
Signed-off-by: Hiep Cao Minh <cm-hiep at jinso.co.jp>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/board-lager.c | 64 ++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index d47052e..04cb932 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -39,6 +39,11 @@
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
@@ -166,6 +171,59 @@ static const struct resource ether_resources[] __initconst = {
DEFINE_RES_IRQ(gic_spi(162)),
};
+/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
+static struct mtd_partition spi_flash_part[] = {
+ /* Reserved for user loader program, read-only */
+ {
+ .name = "loader",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* Reserved for user program, read-only */
+ {
+ .name = "user",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* All else is writable (e.g. JFFS2) */
+ {
+ .name = "flash",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct flash_platform_data spi_flash_data = {
+ .name = "m25p80",
+ .parts = spi_flash_part,
+ .nr_parts = ARRAY_SIZE(spi_flash_part),
+ .type = "s25fl512s",
+};
+
+static const struct rspi_plat_data qspi_pdata __initconst = {
+ .num_chipselect = 1,
+};
+
+static const struct spi_board_info spi_info[] __initconst = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &spi_flash_data,
+ .mode = SPI_MODE_0,
+ .max_speed_hz = 30000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+/* QSPI resource */
+static const struct resource qspi_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe6b10000, 0x1000),
+ DEFINE_RES_IRQ(gic_spi(184)),
+};
+
static const struct pinctrl_map lager_pinctrl_map[] = {
/* DU (CN10: ARGB0, CN13: LVDS) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@@ -223,6 +281,12 @@ static void __init lager_add_standard_devices(void)
ðer_pdata, sizeof(ether_pdata));
lager_add_du_device();
+
+ platform_device_register_resndata(&platform_bus, "qspi", 0,
+ qspi_resources,
+ ARRAY_SIZE(qspi_resources),
+ &qspi_pdata, sizeof(qspi_pdata));
+ spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
}
/*
--
1.8.4
More information about the linux-arm-kernel
mailing list