[PATCH 02/10] ARM: tegra: Hook up SDMMC3 power-supply on Venice2

[Thierry Reding]

The SDMMC3 interface is supplied with 1.8V by the PMICs LDO6.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 arch/arm/boot/dts/tegra124-venice2.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 5dc0c64b7682..7a4d5e23ddf4 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -531,7 +531,7 @@
 					regulator-max-microvolt = <1200000>;
 				};
 
-				ldo6 {
+				vddio_sdmmc3: ldo6 {
 					regulator-name = "vddio_sdmmc";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -580,6 +580,7 @@
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		status = "okay";
 		bus-width = <4>;
+		vmmc-supply = <&vddio_sdmmc3>;
 	};
 
 	sdhci at 700b0600 {
-- 
1.8.4.2