[PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume

[Felipe Balbi]

On Fri, Dec 13, 2013 at 09:23:38AM +0800, Peter Chen wrote:
> Implementation of notify_suspend and notify_resume will be different
> according to mxs_phy_data->flags.
> 
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   55 ++++++++++++++++++++++++++++++++++++++---
>  1 files changed, 51 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index 0ef930a..e3df53f 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -166,8 +166,8 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
>  static int mxs_phy_on_connect(struct usb_phy *phy,
>  		enum usb_device_speed speed)
>  {
> -	dev_dbg(phy->dev, "%s speed device has connected\n",
> -		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
> +	dev_dbg(phy->dev, "%s device has connected\n",
> +		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");

unrelated.

> @@ -179,8 +179,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy,
>  static int mxs_phy_on_disconnect(struct usb_phy *phy,
>  		enum usb_device_speed speed)
>  {
> -	dev_dbg(phy->dev, "%s speed device has disconnected\n",
> -		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
> +	dev_dbg(phy->dev, "%s device has disconnected\n",
> +		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");

unrelated.

> @@ -189,6 +189,48 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
>  	return 0;
>  }
>  
> +static int mxs_phy_on_suspend(struct usb_phy *phy,
> +		enum usb_device_speed speed)
> +{
> +	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
> +
> +	dev_dbg(phy->dev, "%s device has suspended\n",
> +		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
> +
> +	/* delay 4ms to wait bus entering idle */
> +	usleep_range(4000, 5000);
> +
> +	if (mxs_phy->data->flags & MXS_PHY_ABNORMAL_IN_SUSPEND) {
> +		writel_relaxed(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
> +		writel_relaxed(0, phy->io_priv + HW_USBPHY_PWD);
> +	}
> +
> +	if (speed == USB_SPEED_HIGH)
> +		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
> +				phy->io_priv + HW_USBPHY_CTRL_CLR);

why only on HS ? So if !HS and !ABNORMAL, this is no-op.

> +static int mxs_phy_on_resume(struct usb_phy *phy,
> +		enum usb_device_speed speed)
> +{
> +	dev_dbg(phy->dev, "%s device has resumed\n",
> +		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
> +
> +	if (speed == USB_SPEED_HIGH) {
> +		/* Make sure the device has switched to High-Speed mode */
> +		udelay(500);
> +		writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
> +				phy->io_priv + HW_USBPHY_CTRL_SET);
> +	}

likewise, if !HS it's a no-op.

> @@ -235,6 +277,11 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, mxs_phy);
>  
> +	if (mxs_phy->data->flags & MXS_PHY_SENDING_SOF_TOO_FAST) {
> +		mxs_phy->phy.notify_suspend = mxs_phy_on_suspend;
> +		mxs_phy->phy.notify_resume = mxs_phy_on_resume;
> +	}

hmm, and seems like you only need notify_* on a buggy device. Sorry
Peter but you don't have enough arguments to make me agree with this
(and previous) patch.

You gotta find a better way to handle this using normal phy
suspend/resume calls.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131212/85f1c9d5/attachment.sig>