[PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module
Benoit Cousson
bcousson at baylibre.com
Mon Dec 9 12:52:26 EST 2013
Salut Paul,
On 08/12/2013 17:26, Paul Walmsley wrote:
> Hi Benoît,
>
> On Tue, 3 Dec 2013, Roger Quadros wrote:
>
>> Without this, the USB devices are sometimes not detected on OMAP4 Panda
>> with u-boot v2013.10.
>>
>> Unlike what the comment states, errata i660 does not state that we
>> can't RESET the USB host module. Instead it states that RESET is the
>> only way to recover from a deadlock situation.
>>
>> RESET ensures that the module is in a known good state irrespective
>> of what bootloader does with the module, so it must be done at boot.
>>
>> Reported-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
>> Signed-off-by: Roger Quadros <rogerq at ti.com>
>
> Acked-by: Paul Walmsley <paul at pwsan.com>
>
> Will you pick this up for the -rc series, or do you want me or Tony to?
> Roger writes that this one's pretty important.
I guess, it is better for you to take it. I don't have anything queued
for -rc.
Acked-by: Benoit Cousson <bcousson at baylibre.com>
Thanks,
Benoit
>
>
> - Paul
>
>
>> ---
>> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 12 ++----------
>> arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 13 +++----------
>> 2 files changed, 5 insertions(+), 20 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
>> index 1e5b12c..3318cae9 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
>> @@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
>> .sysc_offs = 0x0010,
>> .syss_offs = 0x0014,
>> .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
>> - SYSC_HAS_SOFTRESET),
>> + SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
>> .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
>> SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
>> MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
>> @@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
>> * hence HWMOD_SWSUP_MSTANDBY
>> */
>>
>> - /*
>> - * During system boot; If the hwmod framework resets the module
>> - * the module will have smart idle settings; which can lead to deadlock
>> - * (above Errata Id:i660); so, dont reset the module during boot;
>> - * Use HWMOD_INIT_NO_RESET.
>> - */
>> -
>> - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
>> - HWMOD_INIT_NO_RESET,
>> + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
>> };
>>
>> /*
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
>> index 9e08d69..e297d62 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
>> @@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
>> .rev_offs = 0x0000,
>> .sysc_offs = 0x0010,
>> .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
>> - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
>> + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
>> + SYSC_HAS_RESET_STATUS),
>> .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
>> SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
>> MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
>> @@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
>> * hence HWMOD_SWSUP_MSTANDBY
>> */
>>
>> - /*
>> - * During system boot; If the hwmod framework resets the module
>> - * the module will have smart idle settings; which can lead to deadlock
>> - * (above Errata Id:i660); so, dont reset the module during boot;
>> - * Use HWMOD_INIT_NO_RESET.
>> - */
>> -
>> - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
>> - HWMOD_INIT_NO_RESET,
>> + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
>> .main_clk = "l3init_60m_fclk",
>> .prcm = {
>> .omap4 = {
>> --
>> 1.8.3.2
>>
>
>
> - Paul
>
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
More information about the linux-arm-kernel
mailing list