[GIT PULL] make mach-omap2 boot with device tree only for v3.14

[Paul Walmsley]

On Fri, 13 Dec 2013, Tony Lindgren wrote:

> OK posted a patch for the SBC-T3730 with minimal support also for
> SBC-3530 and SBC-3517 that should boot far enough to start adding
> more devices. Paul, care to try it on the CM-T3517, the patch is:
> 
> [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730

Didn't get anything out of the serial port:

http://www.pwsan.com/omap/testlogs/test_tonys_conversion_v3.14/20131215235827/boot/cmt3517/cmt3517_log.txt

As a partial sanity check, AM3517 EVM was included as part of the run 
(with a separate uImage+dtb of course) and that seems to boot OK:

http://www.pwsan.com/omap/testlogs/test_tonys_conversion_v3.14/20131215235827/boot/3517evm/3517evm_log.txt

In case it's useful, here's a CM-T3517 boot log from v3.13-rc4:

http://www.pwsan.com/omap/testlogs/test_v3.13-rc4/20131215195251/boot/cmt3517/cmt3517_log.txt


- Paul