[PATCH v3 09/21] rtc: support DS1302 RTC on ICP DAS LP-8x4x

[Sergei Ianovich]

Signed-off-by: Sergei Ianovich <ynvich at gmail.com>
---
   v2..v3
   * use usleep_range instead of custom nsleep
   * number change (07/16 -> 09/21)

   v0..v2
   * use device tree
   * use devm helpers where possible

 .../devicetree/bindings/rtc/rtc-ds1302.txt         |  14 +++
 arch/arm/boot/dts/pxa27x-lp8x4x.dts                |  13 +++
 arch/arm/configs/lp8x4x_defconfig                  |   1 +
 drivers/rtc/Kconfig                                |   2 +-
 drivers/rtc/rtc-ds1302.c                           | 100 ++++++++++++++++++++-
 5 files changed, 127 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-ds1302.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
new file mode 100644
index 0000000..876297c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
@@ -0,0 +1,14 @@
+* Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+Required properties:
+- compatible : Should be "ds,rtc-ds1302"
+- reg : Should be address and size of IO memory region
+
+Examples:
+
+rtc at 40900000 {
+	compatible = "ds,rtc-ds1302";
+	reg = <0x1700901c 0x1>;
+};
diff --git a/arch/arm/boot/dts/pxa27x-lp8x4x.dts b/arch/arm/boot/dts/pxa27x-lp8x4x.dts
index 6a780fe..872c386 100644
--- a/arch/arm/boot/dts/pxa27x-lp8x4x.dts
+++ b/arch/arm/boot/dts/pxa27x-lp8x4x.dts
@@ -149,5 +149,18 @@
 				status = "okay";
 			};
 		};
+
+		fpga at 5 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 5 0x3000000 0x10000>;
+
+			rtc at 901c {
+				compatible = "ds,rtc-ds1302";
+				reg = <0x901c 0x1>;
+				status = "okay";
+			};
+		};
 	};
 };
diff --git a/arch/arm/configs/lp8x4x_defconfig b/arch/arm/configs/lp8x4x_defconfig
index 9f1efb6..d60e37a 100644
--- a/arch/arm/configs/lp8x4x_defconfig
+++ b/arch/arm/configs/lp8x4x_defconfig
@@ -141,6 +141,7 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1302=y
 CONFIG_RTC_DRV_PXA=m
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=m
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 0077302..501055f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -676,7 +676,7 @@ config RTC_DRV_DS1286
 
 config RTC_DRV_DS1302
 	tristate "Dallas DS1302"
-	depends on SH_SECUREEDGE5410
+	depends on SH_SECUREEDGE5410 || (ARCH_PXA && HIGH_RES_TIMERS)
 	help
 	  If you say yes here you get support for the Dallas DS1302 RTC chips.
 
diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 07e8d79..24a75d8 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -50,7 +50,7 @@
 #define ds1302_set_tx()
 #define ds1302_set_rx()
 
-static inline int ds1302_hw_init(void)
+static inline int ds1302_hw_init(struct platform_device *pdev)
 {
 	return 0;
 }
@@ -86,6 +86,101 @@ static inline int ds1302_rxbit(void)
 	return !!(get_dp() & RTC_IODATA);
 }
 
+#elif defined(CONFIG_ARCH_PXA) && defined(CONFIG_HIGH_RES_TIMERS)
+
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#define	RTC_CE		0x01
+#define	RTC_CLK		0x02
+#define	RTC_nWE		0x04
+#define	RTC_IODATA	0x08
+
+static unsigned long ds1302_state;
+
+static void *mem;
+
+static inline int ds1302_hw_init(struct platform_device *pdev)
+{
+	struct resource *r;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	mem = devm_ioremap_resource(&pdev->dev, r);
+	if (!mem)
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline void ds1302_reset(void)
+{
+	ds1302_state = 0;
+	iowrite8(ds1302_state, mem);
+	usleep_range(4, 5);
+}
+
+static inline void ds1302_clock(void)
+{
+	usleep_range(1, 2);
+	ds1302_state |= RTC_CLK;
+	iowrite8(ds1302_state, mem);
+	usleep_range(1, 2);
+	ds1302_state &= ~RTC_CLK;
+	iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_start(void)
+{
+	ds1302_state &= ~RTC_CLK;
+	ds1302_state |= RTC_CE;
+	iowrite8(ds1302_state, mem);
+	usleep_range(3, 4);
+}
+
+static inline void ds1302_stop(void)
+{
+	ds1302_state &= ~RTC_CE;
+	iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_tx(void)
+{
+	ds1302_state &= ~RTC_nWE;
+	iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_rx(void)
+{
+	ds1302_state |= RTC_nWE;
+	iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_txbit(int bit)
+{
+	if (bit)
+		ds1302_state |= RTC_IODATA;
+	else
+		ds1302_state &= ~RTC_IODATA;
+	iowrite8(ds1302_state, mem);
+}
+
+static inline int ds1302_rxbit(void)
+{
+	return ioread8(mem) & 0x1;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1302_dt_ids[] = {
+	{ .compatible = "ds,rtc-ds1302" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, ds1302_dt_ids);
+#endif
+
 #else
 #error "Add support for your platform"
 #endif
@@ -216,7 +311,7 @@ static int __init ds1302_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 
-	if (ds1302_hw_init()) {
+	if (ds1302_hw_init(pdev)) {
 		dev_err(&pdev->dev, "Failed to init communication channel");
 		return -EINVAL;
 	}
@@ -245,6 +340,7 @@ static struct platform_driver ds1302_platform_driver = {
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(ds1302_dt_ids),
 	},
 };
 
-- 
1.8.4.2