OMAP still fails - usb phy stuff

[Russell King - ARM Linux]

I still see some OMAP randconfigs failing with this:

arch/arm/mach-omap2/built-in.o: In function `usbhs_init_phys':
dss-common.c:(.text+0x1396c): undefined reference to `usb_bind_phy'
arch/arm/mach-omap2/built-in.o: In function `omap_2430sdp_init':
dss-common.c:(.init.text+0x6c90): undefined reference to `usb_bind_phy'
drivers/built-in.o: In function `omap_usb2_remove':
powercap_sys.c:(.text+0x3520): undefined reference to `usb_remove_phy'
drivers/built-in.o: In function `omap_usb_power_off':
powercap_sys.c:(.text+0x3544): undefined reference to `omap_control_usb_phy_power'
drivers/built-in.o: In function `omap_usb_power_on':
powercap_sys.c:(.text+0x3568): undefined reference to `omap_control_usb_phy_power'
drivers/built-in.o: In function `omap_usb2_probe':
powercap_sys.c:(.text+0x3638): undefined reference to `omap_control_usb_phy_power'
powercap_sys.c:(.text+0x36d4): undefined reference to `usb_add_phy_dev'
drivers/built-in.o: In function `omap_usb2_suspend':
powercap_sys.c:(.text+0x37d0): undefined reference to `omap_control_usb_phy_power'
powercap_sys.c:(.text+0x37f4): undefined reference to `omap_control_usb_phy_power'
drivers/built-in.o: In function `omap_usb2_set_comparator':
powercap_sys.c:(.text+0x3844): undefined reference to `usb_get_phy'
drivers/built-in.o: In function `isp1704_charger_remove':
powercap_sys.c:(.text+0x48d5ec): undefined reference to `usb_put_phy'
drivers/built-in.o: In function `isp1704_charger_probe':
powercap_sys.c:(.text+0x48d64c): undefined reference to `usb_get_phy'
powercap_sys.c:(.text+0x48d884): undefined reference to `usb_put_phy'
drivers/built-in.o: In function `twl4030_bci_probe':
powercap_sys.c:(.init.text+0x13fd4): undefined reference to `usb_get_phy'
powercap_sys.c:(.init.text+0x14114): undefined reference to `usb_put_phy'

Probably caused by over-use of the damned select statement:

warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT)
warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST))
warning: (OMAP_USB2 && TWL4030_USB) selects USB_PHY which has unmet direct dependencies (USB_SUPPORT)
warning: (OMAP_USB2) selects OMAP_CONTROL_USB which has unmet direct dependencies (USB_SUPPORT && (ARCH_OMAP2PLUS || COMPILE_TEST))

You have to wonder why OMAP_USB2 can be enabled when USB_SUPPORT is
disabled.