[PATCH] ARM: at91: add usart3 alias to dtsi

[boris brezillon]

Hi Nicolas,

Le 02/12/2013 11:13, Nicolas Ferre a écrit :
> Alias was missing for SoC of the at91sam9x5 familly that embed USART3.
> Preripheral node and pinctrl declarations are already in the
> at91sam9x5_usart3.dtsi file.
>
> Reported-by: Jiri Prchal <jiri.prchal at aksignal.cz>
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
>   arch/arm/boot/dts/at91sam9g25.dtsi | 4 ++++
>   arch/arm/boot/dts/at91sam9x25.dtsi | 4 ++++
>   2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
> index 17b879990914..d4650b4e9ebb 100644
> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
> @@ -14,6 +14,10 @@
>   	model = "Atmel AT91SAM9G25 SoC";
>   	compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
>   
> +	aliases {
> +		serial4 = &usart3;
> +	};
> +

Shouldn't this go into at91sam9x5_usart3.dtsi ?
This way you would have the same alias for all the SoCs supporting usart3.

Best Regards,

Boris

>   	ahb {
>   		apb {
>   			pinctrl at fffff400 {
> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
> index c2554219f7a4..aceee86f60eb 100644
> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
> @@ -15,6 +15,10 @@
>   	model = "Atmel AT91SAM9X25 SoC";
>   	compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
>   
> +	aliases {
> +		serial4 = &usart3;
> +	};
> +
>   	ahb {
>   		apb {
>   			pinctrl at fffff400 {