[PATCH] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board

[Alex Ling]

Hi, Kukjin,
Could you please review this patch? Thanks!


Regards,
Alex

On Fri, Nov 15, 2013 at 9:13 PM, kasim ling <kasimling at gmail.com> wrote:
> The board compatible string will be documented after the coresponding
> documentation is specified.
>
>
> Regards,
> Alex
>
> On Fri, Nov 15, 2013 at 9:09 PM, Alex Ling <kasimling at gmail.com> wrote:
>> Add a minimal board dts file for EXYNOS4412 based FriendlyARM's
>> TINY4412 board. This patch including adds the node to support
>> peripherals like UART, SD card on SDMMC2 port, and this patch
>> adds GPIO connected LEDS and configure its properties like
>> following:
>> LED1: use 'heartbeat' trigger, blinking while the board is running.
>> LED4: use 'mmc0' trigger, on when mmc0 is accessing.
>> LED2 and LED3 can be controlled from userspace.
>>
>> Signed-off-by: Alex Ling <kasimling at gmail.com>
>> ---
>>  arch/arm/boot/dts/Makefile                |    1 +
>>  arch/arm/boot/dts/exynos4412-tiny4412.dts |   89 +++++++++++++++++++++++++++++
>>  2 files changed, 90 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/exynos4412-tiny4412.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 802720e..91671a2 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>>         exynos4412-odroidx.dtb \
>>         exynos4412-origen.dtb \
>>         exynos4412-smdk4412.dtb \
>> +       exynos4412-tiny4412.dtb \
>>         exynos4412-trats2.dtb \
>>         exynos5250-arndale.dtb \
>>         exynos5250-smdk5250.dtb \
>> diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
>> new file mode 100644
>> index 0000000..78ace14
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
>> @@ -0,0 +1,89 @@
>> +/*
>> + * FriendlyARM's Exynos4412 based TINY4412 board device tree source
>> + *
>> + * Copyright (c) 2013 Alex Ling <kasimling at gmail.com>
>> + *
>> + * Device tree source file for FriendlyARM's TINY4412 board which is based on
>> + * Samsung's Exynos4412 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +/dts-v1/;
>> +#include "exynos4412.dtsi"
>> +
>> +/ {
>> +       model = "FriendlyARM TINY4412 board based on Exynos4412";
>> +       compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
>> +
>> +       memory {
>> +               reg = <0x40000000 0x40000000>;
>> +       };
>> +
>> +       leds {
>> +               compatible = "gpio-leds";
>> +               led1 {
>> +                       label = "led1:heart";
>> +                       gpios = <&gpm4 0 1>;
>> +                       default-state = "off";
>> +                       linux,default-trigger = "heartbeat";
>> +               };
>> +               led2 {
>> +                       label = "led2";
>> +                       gpios = <&gpm4 1 1>;
>> +                       default-state = "off";
>> +               };
>> +               led3 {
>> +                       label = "led3";
>> +                       gpios = <&gpm4 2 1>;
>> +                       default-state = "off";
>> +               };
>> +               led4 {
>> +                       label = "led4:mmc0";
>> +                       gpios = <&gpm4 3 1>;
>> +                       default-state = "off";
>> +                       linux,default-trigger = "mmc0";
>> +               };
>> +       };
>> +
>> +       rtc at 10070000 {
>> +               status = "okay";
>> +       };
>> +
>> +       sdhci at 12530000 {
>> +               bus-width = <4>;
>> +               pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> +               pinctrl-names = "default";
>> +               status = "okay";
>> +       };
>> +
>> +       serial at 13800000 {
>> +               status = "okay";
>> +       };
>> +
>> +       serial at 13810000 {
>> +               status = "okay";
>> +       };
>> +
>> +       serial at 13820000 {
>> +               status = "okay";
>> +       };
>> +
>> +       serial at 13830000 {
>> +               status = "okay";
>> +       };
>> +
>> +       fixed-rate-clocks {
>> +               xxti {
>> +                       compatible = "samsung,clock-xxti";
>> +                       clock-frequency = <0>;
>> +               };
>> +
>> +               xusbxti {
>> +                       compatible = "samsung,clock-xusbxti";
>> +                       clock-frequency = <24000000>;
>> +               };
>> +       };
>> +};
>> --
>> 1.7.9.5
>>