OMAP display subsystem - does it work?

[Tony Lindgren]

* Russell King - ARM Linux <linux at arm.linux.org.uk> [131219 09:58]:
> On Wed, Dec 18, 2013 at 10:23:54AM -0800, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen at ti.com> [131218 05:56]:
> > > I don't have an LDP board at hand, and I wasn't able to find out anything from
> > > the logs.
> > > 
> > > I think I should change omapfb to print something if it's probed succesfully,
> > > as the deferred probing makes finding out if something is probed fine or not
> > > quite murky. Without deferred probing, it was simpler: no errors -> the driver
> > > must be (most likely) ok.
> > > 
> > > Although... In an earlier log, where there was no panel driver, the log has
> > > these errors:
> > > 
> > > Error opening /dev/fb0: No such device
> > > 
> > > There are none in the latest log, which makes me guess the omapfb has been
> > > probed, and fb0 is actually there. But the X is still dying for some reason...
> > > 
> > > I'll look at this more. Maybe someone in our team can find a board to test.
> > 
> > Hmm I had the framebuffer working with DT on LDP after fixing the twl4030
> > gpio regression with 0b2aa8bed3e1 (gpio: twl4030: Fix regression for twl
> > gpio output) using this pdata quirks patch:
> > 
> > [PATCH 3/5] ARM: OMAP2+: Add DT init code for DPI displays and make omap3 LDP to use it
> > 
> > AFAIK the pdata hack above should not be needed now, but I have not tried
> > with Tomi's DSS DT patches yet.
> > 
> > Tomi do you have some sample panel dpi .dts entry somewhere for the LDP I
> > could try at some point?
> > 
> > Russell, maybe all you're missing is just omapfb.vram=0:2M,1:5M or similar
> > from your kernel cmdline?
> 
> Note that I'm trying to get non-DT stuff working properly here first, in
> such a state that it has done in the past with mainline kernels.  This is
> quite an old regression, but it's still a regression nevertheless.

Yeah that should just work now.
 
> I've just built and booted a kernel with the backlight support in.  No
> change.

I just tried it here with v3.13-rc4 in legacy mode using omap2plus_defconfig
with the following test script and seems to work just fine for producing a
nice random color pattern on the LCD:

#!/bin/sh
mount -o rw,remount /
depmod -a
modprobe panel-generic-dpi
modprobe panel-dpi
modprobe omapfb vram=0:2M,1:5M
if [ -c /dev/fb0 ]; then
        dd if=/dev/urandom of=/dev/fb0;
fi

Note that as the panel name has changed recently so my script tries to
load both panel modules.

Maybe you're missing something from your .config file still?

BTW, I'm seeing MMC errors with my LDP here though, does that work
for you?

Regards,

Tony