[PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi

[Laxman Dewangan]

On Friday 06 December 2013 04:49 AM, Stephen Warren wrote:
> On 12/05/2013 04:16 PM, Stephen Warren wrote:
>> On 12/05/2013 03:57 AM, Laxman Dewangan wrote:
>>> The tegra124 pinmux controller is identical to tegra114 with
>>> removing some of existing pins from T114 and adding new pins.
>> I already sent this patch.
> Oh, I do notice one difference between the two patches:
>
> Mine:
>
>> +		reg = <0x70000868 0x148>,	/* Pad control registers */
>> +		      <0x70003000 0x40c>;	/* Mux registers */
> Yours:
>
>> +		reg = <0x70000868 0x164		/* Pad control registers */
>> +		       0x70003000 0x434>;	/* PinMux registers */
> Are the increase register lengths in your patch correct? If so, I guess
> I'll drop my patch and replace it with yours if you fix up the unit address.
Yes, the last entry of the bank 0 and 1 are:
DRV_PINGROUP(ao4,   0x9c8,  2,  3,  4,  12,  7,  20,  7,  28,  2, 30,  
2,  Y),
and
PINGROUP(dp_hpd_pff0,           DP,             RSVD2, RSVD3,          
RSVD4,          DP,             0x3430,  N,  N,  N),