[PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2

[Laxman Dewangan]

On Friday 13 December 2013 03:42 AM, Stephen Warren wrote:
> From: Stephen Warren <swarren at nvidia.com>
>
> Other boards use PULL_NONE for their debug UART pins, and without this
> change, the board doesn't accept any serial input.
>
> Don't set the I2S port pins to tristate mode, or no audio signal will
> be sent out.
>
> Fixes: 605ae5804385 ("ARM: tegra: add default pinctrl nodes for Venice2")
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> ---
> v2: Added fix for I2S port.
>
> Laxman, can you please go through the whole pinctrl configuration for
> Venice2 and make sure it's correct. Perhaps the best approach would be
> to compare it against our downstream kernels for this board.
The patch is generated based on downstream ref platforms setting,
Let me again check with very similar board in dowsntream.