[PATCH v13] dmaengine: Add MOXA ART DMA engine driver
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Thu Dec 12 04:16:57 EST 2013
On Wed, 2013-12-11 at 16:13 +0100, Jonas Jensen wrote:
> The MOXA ART SoC has a DMA controller capable of offloading expensive
> memory operations, such as large copies. This patch adds support for
> the controller including four channels. Two of these are used to
> handle MMC copy on the UC-7112-LX hardware. The remaining two can be
> used in a future audio driver or client application.
>
Thanks for an update.
Since you will have next version anyway (addressing Arnd's comment) I
add my few minor comments below.
[]
> +++ b/drivers/dma/moxart-dma.c
> @@ -0,0 +1,729 @@
> +/*
> + * MOXA ART SoCs DMA Engine support.
> + *
> + * Copyright (C) 2013 Jonas Jensen
> + *
> + * Jonas Jensen <jonas.jensen at gmail.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_dma.h>
> +#include <linux/bitops.h>
> +
> +#include <asm/cacheflush.h>
> +
> +#include "dmaengine.h"
> +#include "virt-dma.h"
> +
> +#define APB_DMA_MAX_CHANNEL 4
> +
> +#define REG_OFF_ADDRESS_SOURCE 0
> +#define REG_OFF_ADDRESS_DEST 4
> +#define REG_OFF_CYCLES 8
> +#define REG_OFF_CTRL 12
> +#define REG_OFF_CHAN_SIZE 16
> +
> +#define APB_DMA_ENABLE BIT(0)
> +#define APB_DMA_FIN_INT_STS BIT(1)
> +#define APB_DMA_FIN_INT_EN BIT(2)
> +#define APB_DMA_BURST_MODE BIT(3)
> +#define APB_DMA_ERR_INT_STS BIT(4)
> +#define APB_DMA_ERR_INT_EN BIT(5)
> +
> +/*
> + * unset: APB, set: AHB
> + */
One line?
> +#define APB_DMA_SOURCE_SELECT 0x40
> +
> +/*
> + * unset: APB, set: AHB
> + */
Ditto.
> +#define APB_DMA_DEST_SELECT 0x80
> +
> +#define APB_DMA_SOURCE 0x100
> +#define APB_DMA_SOURCE_MASK 0x700
> +/*
> + * 000: no increment
> + * 001: +1 (busrt=0), +4 (burst=1)
> + * 010: +2 (burst=0), +8 (burst=1)
> + * 011: +4 (burst=0), +16 (burst=1)
> + * 101: -1 (burst=0), -4 (burst=1)
> + * 110: -2 (burst=0), -8 (burst=1)
> + * 111: -4 (burst=0), -16 (burst=1)
> + */
> +#define APB_DMA_SOURCE_INC_0 0
> +#define APB_DMA_SOURCE_INC_1_4 0x100
> +#define APB_DMA_SOURCE_INC_2_8 0x200
> +#define APB_DMA_SOURCE_INC_4_16 0x300
> +#define APB_DMA_SOURCE_DEC_1_4 0x500
> +#define APB_DMA_SOURCE_DEC_2_8 0x600
> +#define APB_DMA_SOURCE_DEC_4_16 0x700
> +
> +#define APB_DMA_DEST 0x1000
> +#define APB_DMA_DEST_MASK 0x7000
> +/*
> + * 000: no increment
> + * 001: +1 (busrt=0), +4 (burst=1)
> + * 010: +2 (burst=0), +8 (burst=1)
> + * 011: +4 (burst=0), +16 (burst=1)
> + * 101: -1 (burst=0), -4 (burst=1)
> + * 110: -2 (burst=0), -8 (burst=1)
> + * 111: -4 (burst=0), -16 (burst=1)
> +*/
> +#define APB_DMA_DEST_INC_0 0
> +#define APB_DMA_DEST_INC_1_4 0x1000
> +#define APB_DMA_DEST_INC_2_8 0x2000
> +#define APB_DMA_DEST_INC_4_16 0x3000
> +#define APB_DMA_DEST_DEC_1_4 0x5000
> +#define APB_DMA_DEST_DEC_2_8 0x6000
> +#define APB_DMA_DEST_DEC_4_16 0x7000
> +
> +/*
> + * Request signal select source/destination
> + * address for DMA hardware handshake.
> + *
> + * The request line number is a property of
> + * the DMA controller itself, e.g. MMC must
> + * always request channels where
> + * dma_slave_config->slave_id is 5.
For me it seems that text too squeezed here. The width of 72-76 symbols
sounds better.
> + *
> + * 0: no request / grant signal
> + * 1-15: request / grant signal
> + */
> +#define APB_DMA_DEST_REQ_NO 0x10000
> +#define APB_DMA_DEST_REQ_NO_MASK 0xf0000
> +#define APB_DMA_SOURCE_REQ_NO 0x1000000
> +#define APB_DMA_SOURCE_REQ_NO_MASK 0xf000000
> +
> +#define APB_DMA_DATA_WIDTH 0x100000
> +#define APB_DMA_DATA_WIDTH_MASK 0x300000
> +/*
> + * Data width of transfer:
Might be better to keep style across comments. I mean capital letter,
commas, dots, etc.
Check entire code for this.
> + *
> + * 00: word
> + * 01: half
> + * 10: byte
> + */
> +#define APB_DMA_DATA_WIDTH_4 0
> +#define APB_DMA_DATA_WIDTH_2 0x100000
> +#define APB_DMA_DATA_WIDTH_1 0x200000
> +
> +#define APB_DMA_CYCLES_MASK 0x00ffffff
> +
> +#define MOXART_DMA_DATA_TYPE_S8 0x00
> +#define MOXART_DMA_DATA_TYPE_S16 0x01
> +#define MOXART_DMA_DATA_TYPE_S32 0x02
> +
> +struct moxart_sg {
> + dma_addr_t addr;
> + uint32_t len;
> +};
> +
> +struct moxart_desc {
> + enum dma_transfer_direction dma_dir;
> + dma_addr_t dev_addr;
> + unsigned int sglen;
> + unsigned int dma_cycles;
> + struct virt_dma_desc vd;
> + uint8_t es;
> + struct moxart_sg sg[0];
> +};
> +
> +struct moxart_chan {
> + struct virt_dma_chan vc;
> +
> + void __iomem *base;
> + struct moxart_desc *desc;
> +
> + struct dma_slave_config cfg;
> +
> + bool allocated;
> + bool error;
> + int ch_num;
> + unsigned int line_reqno;
> + unsigned int sgidx;
> +};
> +
> +struct moxart_dmadev {
> + struct dma_device dma_slave;
> + struct moxart_chan slave_chans[APB_DMA_MAX_CHANNEL];
> +};
> +
> +struct moxart_filter_data {
> + struct moxart_dmadev *mdc;
> + struct of_phandle_args *dma_spec;
> +};
> +
> +static const unsigned es_bytes[] = {
> + [MOXART_DMA_DATA_TYPE_S8] = 1,
> + [MOXART_DMA_DATA_TYPE_S16] = 2,
> + [MOXART_DMA_DATA_TYPE_S32] = 4,
> +};
> +
> +static struct device *chan2dev(struct dma_chan *chan)
> +{
> + return &chan->dev->device;
> +}
> +
> +static inline struct moxart_chan *to_moxart_dma_chan(struct dma_chan *c)
> +{
> + return container_of(c, struct moxart_chan, vc.chan);
> +}
> +
> +static inline struct moxart_desc *to_moxart_dma_desc(
> + struct dma_async_tx_descriptor *t)
> +{
> + return container_of(t, struct moxart_desc, vd.tx);
> +}
> +
> +static void moxart_dma_desc_free(struct virt_dma_desc *vd)
> +{
> + kfree(container_of(vd, struct moxart_desc, vd));
> +}
> +
> +static int moxart_terminate_all(struct dma_chan *chan)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> + unsigned long flags;
> + LIST_HEAD(head);
> + u32 ctrl;
> +
> + dev_dbg(chan2dev(chan), "%s: ch=%p\n", __func__, ch);
> +
> + spin_lock_irqsave(&ch->vc.lock, flags);
> +
> + if (ch->desc)
> + ch->desc = NULL;
> +
> + ctrl = readl(ch->base + REG_OFF_CTRL);
> + ctrl &= ~(APB_DMA_ENABLE | APB_DMA_FIN_INT_EN | APB_DMA_ERR_INT_EN);
> + writel(ctrl, ch->base + REG_OFF_CTRL);
> +
> + vchan_get_all_descriptors(&ch->vc, &head);
> + spin_unlock_irqrestore(&ch->vc.lock, flags);
> + vchan_dma_desc_free_list(&ch->vc, &head);
> +
> + return 0;
> +}
> +
> +static int moxart_slave_config(struct dma_chan *chan,
> + struct dma_slave_config *cfg)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> + u32 ctrl;
> +
> + ch->cfg = *cfg;
> +
> + ctrl = readl(ch->base + REG_OFF_CTRL);
> + ctrl |= APB_DMA_BURST_MODE;
> + ctrl &= ~(APB_DMA_DEST_MASK | APB_DMA_SOURCE_MASK);
> + ctrl &= ~(APB_DMA_DEST_REQ_NO_MASK | APB_DMA_SOURCE_REQ_NO_MASK);
> +
> + switch (ch->cfg.src_addr_width) {
> + case DMA_SLAVE_BUSWIDTH_1_BYTE:
> + ctrl |= APB_DMA_DATA_WIDTH_1;
> + if (ch->cfg.direction != DMA_MEM_TO_DEV)
> + ctrl |= APB_DMA_DEST_INC_1_4;
> + else
> + ctrl |= APB_DMA_SOURCE_INC_1_4;
> + break;
> + case DMA_SLAVE_BUSWIDTH_2_BYTES:
> + ctrl |= APB_DMA_DATA_WIDTH_2;
> + if (ch->cfg.direction != DMA_MEM_TO_DEV)
> + ctrl |= APB_DMA_DEST_INC_2_8;
> + else
> + ctrl |= APB_DMA_SOURCE_INC_2_8;
> + break;
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:
> + ctrl &= ~APB_DMA_DATA_WIDTH;
> + if (ch->cfg.direction != DMA_MEM_TO_DEV)
> + ctrl |= APB_DMA_DEST_INC_4_16;
> + else
> + ctrl |= APB_DMA_SOURCE_INC_4_16;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (ch->cfg.direction == DMA_MEM_TO_DEV) {
> + ctrl &= ~APB_DMA_DEST_SELECT;
> + ctrl |= APB_DMA_SOURCE_SELECT;
> + ctrl |= (ch->line_reqno << 16 &
> + APB_DMA_DEST_REQ_NO_MASK);
> + } else {
> + ctrl |= APB_DMA_DEST_SELECT;
> + ctrl &= ~APB_DMA_SOURCE_SELECT;
> + ctrl |= (ch->line_reqno << 24 &
> + APB_DMA_SOURCE_REQ_NO_MASK);
> + }
> +
> + writel(ctrl, ch->base + REG_OFF_CTRL);
> +
> + return 0;
> +}
> +
> +static int moxart_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> + unsigned long arg)
> +{
> + int ret = 0;
> +
> + switch (cmd) {
> + case DMA_PAUSE:
> + case DMA_RESUME:
> + return -EINVAL;
> + case DMA_TERMINATE_ALL:
> + moxart_terminate_all(chan);
> + break;
> + case DMA_SLAVE_CONFIG:
> + ret = moxart_slave_config(chan, (struct dma_slave_config *)arg);
> + break;
> + default:
> + ret = -ENOSYS;
> + }
> +
> + return ret;
> +}
> +
> +static struct dma_async_tx_descriptor *moxart_prep_slave_sg(
> + struct dma_chan *chan, struct scatterlist *sgl,
> + unsigned int sg_len, enum dma_transfer_direction dir,
> + unsigned long tx_flags, void *context)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> + struct moxart_desc *d;
> + enum dma_slave_buswidth dev_width;
> + dma_addr_t dev_addr;
> + struct scatterlist *sgent;
> + unsigned int es, i;
Could you split to two lines since the variables are from different
classes of application?
> +
> + if (!is_slave_direction(dir)) {
> + dev_err(chan2dev(chan), "%s: invalid DMA direction\n",
> + __func__);
> + return NULL;
> + }
> +
> + if (dir == DMA_DEV_TO_MEM) {
> + dev_addr = ch->cfg.src_addr;
> + dev_width = ch->cfg.src_addr_width;
> + } else {
> + dev_addr = ch->cfg.dst_addr;
> + dev_width = ch->cfg.dst_addr_width;
> + }
> +
> + switch (dev_width) {
> + case DMA_SLAVE_BUSWIDTH_1_BYTE:
> + es = MOXART_DMA_DATA_TYPE_S8;
> + break;
> + case DMA_SLAVE_BUSWIDTH_2_BYTES:
> + es = MOXART_DMA_DATA_TYPE_S16;
> + break;
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:
> + es = MOXART_DMA_DATA_TYPE_S32;
> + break;
> + default:
> + dev_err(chan2dev(chan), "%s: unsupported data width (%u)\n",
> + __func__, dev_width);
> + return NULL;
> + }
> +
> + d = kzalloc(sizeof(*d) + sg_len * sizeof(d->sg[0]), GFP_ATOMIC);
> + if (!d)
> + return NULL;
> +
> + d->dma_dir = dir;
> + d->dev_addr = dev_addr;
> + d->es = es;
> +
> + for_each_sg(sgl, sgent, sg_len, i) {
> + d->sg[i].addr = sg_dma_address(sgent);
> + d->sg[i].len = sg_dma_len(sgent);
> + }
> +
> + d->sglen = sg_len;
> +
> + ch->error = 0;
> +
> + return vchan_tx_prep(&ch->vc, &d->vd, tx_flags);
> +}
> +
> +bool moxart_dma_filter_fn(struct dma_chan *chan, void *param)
> +{
> + struct moxart_filter_data *fdata = param;
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> +
> + if (chan->device->dev != fdata->mdc->dma_slave.dev ||
> + chan->device->dev->of_node != fdata->dma_spec->np) {
> + dev_dbg(chan2dev(chan), "device not registered to this DMA engine\n");
> + return false;
> + }
> +
> + dev_dbg(chan2dev(chan), "%s: ch=%p line_reqno=%u ch->ch_num=%u\n",
> + __func__, ch, fdata->dma_spec->args[0], ch->ch_num);
> +
> + ch->line_reqno = fdata->dma_spec->args[0];
> +
> + return true;
> +}
> +
> +static struct dma_chan *moxart_of_xlate(struct of_phandle_args *dma_spec,
> + struct of_dma *ofdma)
> +{
> + struct moxart_dmadev *mdc = ofdma->of_dma_data;
> + struct moxart_filter_data fdata = {
> + .mdc = mdc,
> + };
> +
> + if (dma_spec->args_count < 1)
> + return NULL;
> +
> + fdata.dma_spec = dma_spec;
> +
> + return dma_request_channel(mdc->dma_slave.cap_mask,
> + moxart_dma_filter_fn, &fdata);
> +}
> +
> +static int moxart_alloc_chan_resources(struct dma_chan *chan)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> +
> + dev_dbg(chan2dev(chan), "%s: allocating channel #%u\n",
> + __func__, ch->ch_num);
> + ch->allocated = 1;
> +
> + return 0;
> +}
> +
> +static void moxart_free_chan_resources(struct dma_chan *chan)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> +
> + vchan_free_chan_resources(&ch->vc);
> +
> + dev_dbg(chan2dev(chan), "%s: freeing channel #%u\n",
> + __func__, ch->ch_num);
> + ch->allocated = 0;
> +}
> +
> +static void moxart_dma_set_params(struct moxart_chan *ch, dma_addr_t src_addr,
> + dma_addr_t dst_addr)
> +{
> + writel(src_addr, ch->base + REG_OFF_ADDRESS_SOURCE);
> + writel(dst_addr, ch->base + REG_OFF_ADDRESS_DEST);
> +}
> +
> +static void moxart_set_transfer_params(struct moxart_chan *ch, unsigned int len)
> +{
> + struct moxart_desc *d = ch->desc;
> + unsigned int sglen_div = es_bytes[d->es];
> +
> + d->dma_cycles = len >> sglen_div;
> +
> + /*
> + * cycles is 4 on 64 bytes copied, i.e. one cycle copies 16 bytes
> + * ( when width is APB_DMAB_DATA_WIDTH_4 )
> + */
> + writel(d->dma_cycles, ch->base + REG_OFF_CYCLES);
> +
> + dev_dbg(chan2dev(&ch->vc.chan), "%s: set %u DMA cycles (len=%u)\n",
> + __func__, d->dma_cycles, len);
> +}
> +
> +static void moxart_start_dma(struct moxart_chan *ch)
> +{
> + u32 ctrl;
> +
> + ctrl = readl(ch->base + REG_OFF_CTRL);
> + ctrl |= (APB_DMA_ENABLE | APB_DMA_FIN_INT_EN | APB_DMA_ERR_INT_EN);
> + writel(ctrl, ch->base + REG_OFF_CTRL);
> +}
> +
> +static void moxart_dma_start_sg(struct moxart_chan *ch, unsigned int idx)
> +{
> + struct moxart_desc *d = ch->desc;
> + struct moxart_sg *sg = ch->desc->sg + idx;
> +
> + if (ch->desc->dma_dir == DMA_MEM_TO_DEV)
> + moxart_dma_set_params(ch, sg->addr, d->dev_addr);
> + else if (ch->desc->dma_dir == DMA_DEV_TO_MEM)
> + moxart_dma_set_params(ch, d->dev_addr, sg->addr);
> +
> + moxart_set_transfer_params(ch, sg->len);
> +
> + moxart_start_dma(ch);
> +}
> +
> +static void moxart_dma_start_desc(struct dma_chan *chan)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> + struct virt_dma_desc *vd;
> +
> + vd = vchan_next_desc(&ch->vc);
> +
> + if (!vd) {
> + ch->desc = NULL;
> + return;
> + }
> +
> + list_del(&vd->node);
> +
> + ch->desc = to_moxart_dma_desc(&vd->tx);
> + ch->sgidx = 0;
> +
> + moxart_dma_start_sg(ch, 0);
> +}
> +
> +static void moxart_issue_pending(struct dma_chan *chan)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&ch->vc.lock, flags);
> + if (vchan_issue_pending(&ch->vc) && !ch->desc)
> + moxart_dma_start_desc(chan);
> + spin_unlock_irqrestore(&ch->vc.lock, flags);
> +}
> +
> +static size_t moxart_dma_desc_size(struct moxart_desc *d)
> +{
> + unsigned i;
> + size_t size;
> +
> + for (size = i = 0; i < d->sglen; i++)
> + size += d->sg[i].len;
> +
> + return size;
> +}
> +
> +static size_t moxart_dma_desc_size_in_flight(struct moxart_chan *ch)
> +{
> + size_t size;
> + unsigned int completed_cycles, cycles;
> +
> + cycles = readl(ch->base + REG_OFF_CYCLES);
> + size = moxart_dma_desc_size(ch->desc);
> + completed_cycles = (ch->desc->dma_cycles - cycles);
> + size -= completed_cycles << es_bytes[ch->desc->es];
> +
> + dev_dbg(chan2dev(&ch->vc.chan), "%s: size=%zd\n", __func__, size);
Sorry, I was a bit inaccurate here.
ssize_t (signed type) -> %zd
size_t (unsigned type) -> %zu
Please, fix this.
> +
> + return size;
> +}
> +
> +static enum dma_status moxart_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *txstate)
> +{
> + struct moxart_chan *ch = to_moxart_dma_chan(chan);
> + struct virt_dma_desc *vd;
> + struct moxart_desc *d;
> + enum dma_status ret;
> + unsigned long flags;
> +
> + /*
> + * dma_cookie_status assigns initial residue value
> + */
> + ret = dma_cookie_status(chan, cookie, txstate);
> +
> + spin_lock_irqsave(&ch->vc.lock, flags);
> + vd = vchan_find_desc(&ch->vc, cookie);
> + if (vd) {
> + d = to_moxart_dma_desc(&vd->tx);
> + txstate->residue = moxart_dma_desc_size(d);
> + } else if (ch->desc && ch->desc->vd.tx.cookie == cookie) {
> + txstate->residue = moxart_dma_desc_size_in_flight(ch);
> + }
> + spin_unlock_irqrestore(&ch->vc.lock, flags);
> +
> + if (ch->error)
> + return DMA_ERROR;
> +
> + return ret;
> +}
> +
> +static void moxart_dma_init(struct dma_device *dma, struct device *dev)
> +{
> + dma->device_prep_slave_sg = moxart_prep_slave_sg;
> + dma->device_alloc_chan_resources = moxart_alloc_chan_resources;
> + dma->device_free_chan_resources = moxart_free_chan_resources;
> + dma->device_issue_pending = moxart_issue_pending;
> + dma->device_tx_status = moxart_tx_status;
> + dma->device_control = moxart_control;
> + dma->dev = dev;
> +
> + INIT_LIST_HEAD(&dma->channels);
> +}
> +
> +static irqreturn_t moxart_dma_interrupt(int irq, void *devid)
> +{
> + struct moxart_dmadev *mc = devid;
> + struct moxart_chan *ch = &mc->slave_chans[0];
> + unsigned int i;
> + unsigned long flags;
> + u32 ctrl;
> +
> + dev_dbg(chan2dev(&ch->vc.chan), "%s\n", __func__);
> +
> + for (i = 0; i < APB_DMA_MAX_CHANNEL; i++, ch++) {
> + if (!ch->allocated)
> + continue;
> +
> + ctrl = readl(ch->base + REG_OFF_CTRL);
> +
> + dev_dbg(chan2dev(&ch->vc.chan), "%s: ch=%p ch->base=%p ctrl=%x\n",
> + __func__, ch, ch->base, ctrl);
> +
> + if (ctrl & APB_DMA_FIN_INT_STS) {
> + ctrl &= ~APB_DMA_FIN_INT_STS;
> + if (ch->desc) {
> + spin_lock_irqsave(&ch->vc.lock, flags);
> + if (++ch->sgidx < ch->desc->sglen)
> + moxart_dma_start_sg(ch, ch->sgidx);
> + else {
} else {
If you use {} in one branch you have to use it in the other accordingly
to coding style.
> + vchan_cookie_complete(&ch->desc->vd);
> + ch->desc = NULL;
> + }
> + spin_unlock_irqrestore(&ch->vc.lock, flags);
> + }
> + }
> +
> + if (ctrl & APB_DMA_ERR_INT_STS) {
> + ctrl &= ~APB_DMA_ERR_INT_STS;
> + ch->error = 1;
> + }
> +
> + writel(ctrl, ch->base + REG_OFF_CTRL);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int moxart_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct resource *res;
> + static void __iomem *dma_base_addr;
> + int ret, i;
> + unsigned int irq;
> + struct moxart_chan *ch;
> + struct moxart_dmadev *mdc;
> +
> + mdc = devm_kzalloc(dev, sizeof(*mdc), GFP_KERNEL);
> + if (!mdc) {
> + dev_err(dev, "can't allocate DMA container\n");
> + return -ENOMEM;
> + }
> +
> + irq = irq_of_parse_and_map(node, 0);
> + if (irq <= 0) {
This one is not correct. It will never be negative (see the variable
type). IIUC, you have to check against 0 only.
> + dev_err(dev, "irq_of_parse_and_map failed\n");
> + return -EINVAL;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dma_base_addr = devm_ioremap_resource(dev, res);
> + if (IS_ERR(dma_base_addr))
> + return PTR_ERR(dma_base_addr);
> +
> + dma_cap_zero(mdc->dma_slave.cap_mask);
> + dma_cap_set(DMA_SLAVE, mdc->dma_slave.cap_mask);
> +
> + moxart_dma_init(&mdc->dma_slave, dev);
> +
> + ch = &mdc->slave_chans[0];
> + for (i = 0; i < APB_DMA_MAX_CHANNEL; i++, ch++) {
> + ch->ch_num = i;
> + ch->base = dma_base_addr + i * REG_OFF_CHAN_SIZE;
> + ch->allocated = 0;
> +
> + ch->vc.desc_free = moxart_dma_desc_free;
> + vchan_init(&ch->vc, &mdc->dma_slave);
> +
> + dev_dbg(dev, "%s: chs[%d]: ch->ch_num=%u ch->base=%p\n",
> + __func__, i, ch->ch_num, ch->base);
> + }
> +
> + platform_set_drvdata(pdev, mdc);
> +
> + ret = devm_request_irq(dev, irq, moxart_dma_interrupt, 0,
> + "moxart-dma-engine", mdc);
> + if (ret) {
> + dev_err(dev, "devm_request_irq failed\n");
> + return ret;
> + }
> +
> + ret = dma_async_device_register(&mdc->dma_slave);
> + if (ret) {
> + dev_err(dev, "dma_async_device_register failed\n");
> + return ret;
> + }
> +
> + ret = of_dma_controller_register(node, moxart_of_xlate, mdc);
> + if (ret) {
> + dev_err(dev, "of_dma_controller_register failed\n");
> + dma_async_device_unregister(&mdc->dma_slave);
> + return ret;
> + }
> +
> + dev_dbg(dev, "%s: IRQ=%u\n", __func__, irq);
> +
> + return 0;
> +}
> +
> +static int moxart_remove(struct platform_device *pdev)
> +{
> + struct moxart_dmadev *m = platform_get_drvdata(pdev);
> +
> + dma_async_device_unregister(&m->dma_slave);
> +
> + if (pdev->dev.of_node)
> + of_dma_controller_free(pdev->dev.of_node);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id moxart_dma_match[] = {
> + { .compatible = "moxa,moxart-dma" },
> + { }
> +};
> +
> +static struct platform_driver moxart_driver = {
> + .probe = moxart_probe,
> + .remove = moxart_remove,
> + .driver = {
> + .name = "moxart-dma-engine",
> + .owner = THIS_MODULE,
> + .of_match_table = moxart_dma_match,
> + },
> +};
> +
> +static int moxart_init(void)
> +{
> + return platform_driver_register(&moxart_driver);
> +}
> +subsys_initcall(moxart_init);
> +
> +static void __exit moxart_exit(void)
> +{
> + platform_driver_unregister(&moxart_driver);
> +}
> +module_exit(moxart_exit);
> +
> +MODULE_AUTHOR("Jonas Jensen <jonas.jensen at gmail.com>");
> +MODULE_DESCRIPTION("MOXART DMA engine driver");
> +MODULE_LICENSE("GPL v2");
--
Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Intel Finland Oy
More information about the linux-arm-kernel
mailing list