[PATCH v4 4/5] ARM: shmobile: r8a7790: Reference clocks

Laurent Pinchart laurent.pinchart+renesas at ideasonboard.com
Wed Dec 11 09:05:15 EST 2013


Reference clocks using a "clocks" property in all nodes corresponding to
devices that require a clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d14c855..8ed48de 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -197,6 +197,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C0>;
 		status = "disabled";
 	};
 
@@ -207,6 +208,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C1>;
 		status = "disabled";
 	};
 
@@ -217,6 +219,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C2>;
 		status = "disabled";
 	};
 
@@ -227,6 +230,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C3>;
 		status = "disabled";
 	};
 
@@ -235,6 +239,7 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -244,6 +249,7 @@
 		reg = <0 0xee220000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -258,6 +264,7 @@
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -267,6 +274,7 @@
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -276,6 +284,7 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -285,6 +294,7 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list