[PATCH V2 7/7] ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.

[Troy Kisky]

This works around a hardware bug.

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>

---
This has not been tested
---
 arch/arm/boot/dts/imx6q-arm2.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 9c00b73..631a426 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -75,7 +75,7 @@
 		};
 
 		pinctrl_enet: enetgrp {
-			fsl,pins = <MX6QDL_ENET_PINGRP2>;
+			fsl,pins = <MX6QDL_ENET_PINGRP2_GPIO6>;
 		};
 
 		pinctrl_gpmi_nand: gpminandgrp {
@@ -115,6 +115,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };
 
-- 
1.8.1.2