[PATCH 18/28] ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code
Simon Horman
horms+renesas at verge.net.au
Sun Dec 1 21:19:24 EST 2013
From: Magnus Damm <damm at opensource.se>
Now when KZM9D legacy C board support code is
gone then remove emev2_add_standard_devices()
and all the platform devices from setup-emev2.c.
Signed-off-by: Magnus Damm <damm at opensource.se>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/include/mach/emev2.h | 5 -
arch/arm/mach-shmobile/setup-emev2.c | 148 ----------------------------
2 files changed, 153 deletions(-)
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index c2eb756..fcb142a 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -3,12 +3,7 @@
extern void emev2_map_io(void);
extern void emev2_init_delay(void);
-extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
-
-#define EMEV2_GPIO_BASE 200
-#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
-
extern struct smp_operations emev2_smp_ops;
#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 4d39bf4..e7031b0 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -19,22 +19,12 @@
#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-em.h>
#include <linux/of_platform.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/emev2.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
@@ -53,144 +43,6 @@ void __init emev2_map_io(void)
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-/* UART */
-static struct resource uart0_resources[] = {
- DEFINE_RES_MEM(0xe1020000, 0x38),
- DEFINE_RES_IRQ(40),
-};
-
-static struct resource uart1_resources[] = {
- DEFINE_RES_MEM(0xe1030000, 0x38),
- DEFINE_RES_IRQ(41),
-};
-
-static struct resource uart2_resources[] = {
- DEFINE_RES_MEM(0xe1040000, 0x38),
- DEFINE_RES_IRQ(42),
-};
-
-static struct resource uart3_resources[] = {
- DEFINE_RES_MEM(0xe1050000, 0x38),
- DEFINE_RES_IRQ(43),
-};
-
-#define emev2_register_uart(idx) \
- platform_device_register_simple("serial8250-em", idx, \
- uart##idx##_resources, \
- ARRAY_SIZE(uart##idx##_resources))
-
-/* STI */
-static struct resource sti_resources[] = {
- DEFINE_RES_MEM(0xe0180000, 0x54),
- DEFINE_RES_IRQ(157),
-};
-
-#define emev2_register_sti() \
- platform_device_register_simple("em_sti", 0, \
- sti_resources, \
- ARRAY_SIZE(sti_resources))
-
-/* GIO */
-static struct gpio_em_config gio0_config = {
- .gpio_base = 0,
- .irq_base = EMEV2_GPIO_IRQ(0),
- .number_of_pins = 32,
-};
-
-static struct resource gio0_resources[] = {
- DEFINE_RES_MEM(0xe0050000, 0x2c),
- DEFINE_RES_MEM(0xe0050040, 0x20),
- DEFINE_RES_IRQ(99),
- DEFINE_RES_IRQ(100),
-};
-
-static struct gpio_em_config gio1_config = {
- .gpio_base = 32,
- .irq_base = EMEV2_GPIO_IRQ(32),
- .number_of_pins = 32,
-};
-
-static struct resource gio1_resources[] = {
- DEFINE_RES_MEM(0xe0050080, 0x2c),
- DEFINE_RES_MEM(0xe00500c0, 0x20),
- DEFINE_RES_IRQ(101),
- DEFINE_RES_IRQ(102),
-};
-
-static struct gpio_em_config gio2_config = {
- .gpio_base = 64,
- .irq_base = EMEV2_GPIO_IRQ(64),
- .number_of_pins = 32,
-};
-
-static struct resource gio2_resources[] = {
- DEFINE_RES_MEM(0xe0050100, 0x2c),
- DEFINE_RES_MEM(0xe0050140, 0x20),
- DEFINE_RES_IRQ(103),
- DEFINE_RES_IRQ(104),
-};
-
-static struct gpio_em_config gio3_config = {
- .gpio_base = 96,
- .irq_base = EMEV2_GPIO_IRQ(96),
- .number_of_pins = 32,
-};
-
-static struct resource gio3_resources[] = {
- DEFINE_RES_MEM(0xe0050180, 0x2c),
- DEFINE_RES_MEM(0xe00501c0, 0x20),
- DEFINE_RES_IRQ(105),
- DEFINE_RES_IRQ(106),
-};
-
-static struct gpio_em_config gio4_config = {
- .gpio_base = 128,
- .irq_base = EMEV2_GPIO_IRQ(128),
- .number_of_pins = 31,
-};
-
-static struct resource gio4_resources[] = {
- DEFINE_RES_MEM(0xe0050200, 0x2c),
- DEFINE_RES_MEM(0xe0050240, 0x20),
- DEFINE_RES_IRQ(107),
- DEFINE_RES_IRQ(108),
-};
-
-#define emev2_register_gio(idx) \
- platform_device_register_resndata(&platform_bus, "em_gio", \
- idx, gio##idx##_resources, \
- ARRAY_SIZE(gio##idx##_resources), \
- &gio##idx##_config, \
- sizeof(struct gpio_em_config))
-
-static struct resource pmu_resources[] = {
- DEFINE_RES_IRQ(152),
- DEFINE_RES_IRQ(153),
-};
-
-#define emev2_register_pmu() \
- platform_device_register_simple("arm-pmu", -1, \
- pmu_resources, \
- ARRAY_SIZE(pmu_resources))
-
-void __init emev2_add_standard_devices(void)
-{
- if (!IS_ENABLED(CONFIG_COMMON_CLK))
- emev2_clock_init();
-
- emev2_register_uart(0);
- emev2_register_uart(1);
- emev2_register_uart(2);
- emev2_register_uart(3);
- emev2_register_sti();
- emev2_register_gio(0);
- emev2_register_gio(1);
- emev2_register_gio(2);
- emev2_register_gio(3);
- emev2_register_gio(4);
- emev2_register_pmu();
-}
-
void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
--
1.8.4
More information about the linux-arm-kernel
mailing list