[PATCH 2/7] pinctrl: exynos: add exynos5260 SoC specific data

[Tomasz Figa]

Hi Young-Gun, Pankaj, Rahul, Arun,

Please see my comments inline.

On Friday 06 of December 2013 21:26:26 Rahul Sharma wrote:
> From: Young-Gun Jang <yg1004.jang at samsung.com>
> 
> Add Samsung Exynos5260 SoC specific data to enable pinctrl
> support for all platforms based on EXYNOS5260.
[snip]
> diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
> index 155b1b3..9a93df6 100644
> --- a/drivers/pinctrl/pinctrl-exynos.c
> +++ b/drivers/pinctrl/pinctrl-exynos.c
> @@ -1042,6 +1042,88 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
>  	},
>  };
>  
> +/* pin banks of exynos5260 pin-controller 0 */
> +static struct samsung_pin_bank exynos5260_pin_banks0[] = {
> +	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpa0", 0x00),
> +	EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpa1", 0x04),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
> +	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
> +	EXYNOS_PIN_BANK_EINTG(4, 0x080, "gpb1", 0x10),
> +	EXYNOS_PIN_BANK_EINTG(5, 0x0A0, "gpb2", 0x14),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpb3", 0x18),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x0E0, "gpb4", 0x1c),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpb5", 0x20),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpd0", 0x24),
> +	EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpd1", 0x28),
> +	EXYNOS_PIN_BANK_EINTG(5, 0x160, "gpd2", 0x2c),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpe0", 0x30),
> +	EXYNOS_PIN_BANK_EINTG(5, 0x1A0, "gpe1", 0x34),
> +	EXYNOS_PIN_BANK_EINTG(4, 0x1C0, "gpf0", 0x38),
> +	EXYNOS_PIN_BANK_EINTG(8, 0x1E0, "gpf1", 0x3c),
> +	EXYNOS_PIN_BANK_EINTG(2, 0x200, "gpk0", 0x40),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),

nit: Please use lowercase hexadecimal characters. Despite of already
existing code, lowercase is the preferred way.

> +};
> +
> +/* pin banks of exynos5260 pin-controller 1 */
> +static struct samsung_pin_bank exynos5260_pin_banks1[] = {
> +	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpc0", 0x00),
> +	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpc1", 0x04),
> +	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
> +	EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpc3", 0x0c),
> +	EXYNOS_PIN_BANK_EINTG(4, 0x080, "gpc4", 0x10),
> +};
> +
> +/* pin banks of exynos5260 pin-controller 2 */
> +static struct samsung_pin_bank exynos5260_pin_banks2[] = {
> +	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
> +	EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
> +};
> +
> +/*
> + * Samsung pinctrl driver data for Exynos5260 SoC. Exynos5420 SoC includes
> + * four gpio/pin-mux/pinconfig controllers.

Hmm, I can see only three of them below. Is there one left undefined?

Otherwise, the patch looks fine.

Best regards,
Tomasz