[GIT PULL] make mach-omap2 boot with device tree only for v3.14

[Tony Lindgren]

* Tony Lindgren <tony at atomide.com> [131210 11:00]:
> * Paul Walmsley <paul at pwsan.com> [131210 10:47]:
> > On Mon, 9 Dec 2013, Tony Lindgren wrote:
> > 
> > > The following changes since commit f2e2c9d9b4087b74eb9e00d8dfac148354cb0b71:
> > > 
> > >   ARM: dts: Fix booting for secure omaps (2013-12-06 15:30:43 -0800)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.14/omap3-board-removal-signed
> > > 
> > > for you to fetch changes up to 736e812636ea72be444b85fa7e92554967459069:
> > > 
> > >   ARM: OMAP2+: Remove unused platform init code and headers (2013-12-08 14:15:46 -0800)
> > 
> > The description in Tony's pull request below alludes to what regressions 
> > will occur when this is pulled.  But just to state it in terms of what 
> > happened on the local testbed here when I tried it:
> > 
> > - CM-T3517 booting will break since there's no .dts file for it.  Are
> >   there other boards that will be affected here too?
> 
> Yeah the cm-t3770 is on my todo list, but I've left it last as it's my
> home router and has been behaving quite nicely.
> 
> That should then cover:
> 
> SBC-T3530
> http://compulab.co.il/products/sbcs/sbc-t3530/
> 
> SBC-T3517
> http://compulab.co.il/products/sbcs/sbc-t3517/
> 
> SBC-T3730
> http://compulab.co.il/products/sbcs/sbc-t3730/
> 
> They all seem to have the same baseboard, and the CPU module is
> different. So getting the 3530 and 3517 variants working should
> be trivial. I don't have 3530 or 3517 variants, so somebody else
> will need to do those two.
> 
> And Nishant just posted a .dts file for the 3517 craneboard.

And here's a list of other boards we don't have .dts file for if
people have these:

board-devkit8000.c		omap3-ldp.dts or omap3-beagle.dts is a good starting point
board-omap3logic.c		omap3-ldp.dts or omap3-beagle.dts is a good starting point
board-omap3pandora.c		omap3-ldp.dts or omap3-beagle.dts is a good starting point
board-omap3stalker.c
board-omap3touchbook.c

For the ones above, omap3-ldp.dts or omap3-beagle.dts are good starting
points. There's the DPI display pdata patch too, but it seems we want to
wait to see if Tomi gets his display changes done before applying that.

I don't have any of the ones above, so people using those please
do the .dts files ASAP.

Or send me those boards with working boot loaders and I'll do them at
a rate of one board per day or so.. And then you're stuck with my
criteria of "usable" which is usually serial port and NFS root unless
I really like the board, mhuwahuaaaahh!

board-ti8168evm.c

I doubt ti8168evm has even worked for a long time.. It's in pretty
sorry state unfortunately with missing clock support and missing
handle_irq entry in the board-ti8168evm.c.

Regards,

Tony