[GIT PULL 2/2] ARM: imx: device tree changes for 3.14
Shawn Guo
shawn.guo at linaro.org
Tue Dec 31 00:44:29 EST 2013
This pull-request has the following two dependencies:
- The first pull-request, i.e. [GIT PULL 1/2] ARM: imx: soc changes for 3.14
- The pinctrl 'devel' branch below.
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel
Linus Walleij promised that the branch will be stable at least from
the point I pulled into my tree, that is commit 31d610f (pinctrl:
imx1-core populate subdevices).
Please pull, thanks.
Shawn
The following changes since commit 43cb02365bc4aacdef642ec0d3e913ab76fbee02:
Merge commit '31d610f' into imx/dt (2013-12-31 11:02:39 +0800)
are available in the git repository at:
git://git.linaro.org/people/shawnguo/linux-2.6.git tags/imx-dt-3.14
for you to fetch changes up to 52bfd188eccf69ee90d8279bccfbb041c9165080:
ARM: dts: imx6qdl-sabresd: Add PFUZE100 support (2013-12-31 11:10:02 +0800)
----------------------------------------------------------------
i.MX device tree changes for 3.14:
- New SoC device tree support for imx35 and imx50.
- A good number of new i.MX6 boards support: SolidRun HummingBoard,
cm-fx6, dmo-edmqmx6, nitrogen6x, and Gateworks Ventana gw5xxx family.
- A few other new i.MX boards support: imx25-eukrea, imx28-duckbill,
imx28-eukrea, imx50-evk, imx51-eukrea, and imx53-voipac.
- Add pinfunc headers for imx25, imx27 and imx50.
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data.
- Use clock defines in imx5 DTS files.
- Update imx6q-sabrelite device tree and add Dual Lite/Solo support.
- Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687
ENET: Only the ENET wake-up interrupt request can wake the system
from Wait mode.)
- A plenty of random updates on various SoC and board device tree
sources, adding pinctrl settings, device nodes, properties, etc.
----------------------------------------------------------------
Aida Mynzhasova (1):
ARM: dts: mxs: add auart2 pinmux to imx28.dtsi
Alexander Shiyan (23):
ARM: dts: i.MX51: Update CPU node
ARM: dts: i.MX51: Add dummy clock to AUDMUX
ARM: dts: i.MX51: Switch to use standard IRQ flags definitions
ARM: dts: i.MX51: Move usbphy0 node from AIPS1
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
ARM: dts: imx51-babbage: Define FEC reset pin
ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT support
ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module
ARM: dts: imx27-phytec-phycore-som: Update FEC node
ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions
ARM: dts: i.MX27: Configure GPIOs as "input" by default
ARM: dts: i.MX: Move include "imxXX-pinfunc.h" into "imxXX-pingrp.h"
ARM: dts: imx27-phytec-phycore-rdk: Change pinctrl settings for I2C1
ARM: dts: imx27-phytec-phycore-som: trivial: Typo fix
ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on module
ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsi
ARM: dts: imx27-phytec-phycore-som: Add NFC pin group
ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module
ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC
ARM: dts: i.MX27: Add missing pullup settings for SDHC pin groups
ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC
ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM
Alexandre Belloni (3):
ARM: dts: mxs: add #io-channel-cells to mx28 lradc
ARM: dts: mxs: Add iio-hwmon to mx28 soc
ARM: dts: mxs: Add iio-hwmon to mx23 soc
Anson Huang (5):
ARM: dts: imx6q: update setting of VDDARM_CAP voltage
ARM: dts: imx6q: add vddsoc/pu setpoint info
ARM: dts: imx6dl: enable cpufreq support
ARM: dts: imx6qdl: add necessary thermal clk
ARM: dts: imx6qdl-sabresd: Add power key support
Denis Carikli (13):
of: add vendor prefix for Eukrea Electromatique.
ARM: dts: i.MX25: Add ssi clocks and DMA events.
ARM: dts: i.MX25: Add sdma script path.
ARM: dts: imx25.dtsi: Add a label for the Audio Multiplexer.
ARM: dts: imx51.dtsi: Add some pinmux pins.
ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.
ARM: dts: imx25: Add pinctrl functions and groups.
ARM: dts: imx25.dtsi: label the iomuxc.
ARM: dts: mxs: Add 18bit pin config for lcdif.
ARM: dts: mxs: Add a new pin config for the usb0 ID.
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
ARM: dts: mbimxsd25: Add sound support.
ARM: dts: mbimxsd51: Add sound support.
Eric Bénard (1):
ARM: mxs: Add support for the eukrea-cpuimx28.
Fabio Estevam (6):
ARM: dts: imx6q-udoo: Add Ethernet support
ARM: dts: imx6q-sabrelite: Remove duplicate GPIO entry
ARM: dts: imx6q-sabrelite: Place 'status' as the last node
ARM: dts: imx28-evk: Run I2C0 at 400kHz
ARM: dts: imx6: Use 'vddarm' as the regulator name
ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
Greg Ungerer (3):
ARM: dts: imx: add device tree pin definitions for the IMX50
ARM: dts: imx: add IMX50 SoC device tree
ARM: dts: imx: add device tree support for Freescale imx50evk board
Gwenhael Goavec-Merou (10):
ARM: imx27-apf27dev: Add sdhci support
ARM: dts: imx27-apf27dev: fix display size
ARM: imx27: add pingroups for cspi, sdhc and framebuffer
ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1
ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebuffer
ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regulator gpio
ARM: imx28: add apf28 specific initialization (macaddr)
ARM: imx27: add pwm pingrp
ARM: dts: apf27dev: Add pwm support
ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys
John Tobias (1):
ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.
Lothar Waßmann (3):
ARM: dts: imx6qdl: add aliases for can interfaces
ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode
ARM: dts: imx6qdl: add new pingroup for audmux
Lucas Stach (3):
ARM: imx53: use clock defines in DTS files
ARM: imx51: use clock defines in DTS files
ARM: imx50: use clock defines in DTS files
Marek Vasut (6):
ARM: dts: imx53: Fix display pinmux for M53EVK
ARM: dts: imx53: Fix backlight for M53EVK
ARM: dts: imx53: Add USB support for M53EVK
ARM: dts: imx53: Add AHCI SATA DT node
ARM: dts: imx53: Enable AHCI SATA for M53EVK
ARM: dts: imx6q-sabrelite: Enable PCI express
Markus Pargmann (6):
ARM: dts: imx27 pin functions
ARM: dts: imx27 pingroups
ARM: dts: imx27 iomux device node
ARM: dts: imx27 phyCARD-S pinctrl
ARM: dts: imx27 phycore move uart1 to rdk
ARM: dts: imx27 phycore pinctrl
Maxime Ripard (2):
ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree
ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT
Michael Grzeschik (1):
ARM: i.MX28: dts: rename usbphy pin names
Michael Heimpold (1):
ARM: mxs: add support for I2SE's duckbill series
Nicolin Chen (2):
ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000
ARM: dts: imx6qdl: add spdif support for sabreauto
Peter Chen (3):
ARM: dts: imx6q-arm2: enable USB OTG
ARM: dts: imx6: add anatop phandle for usbphy
ARM: dts: imx: add mxs phy controller id
Philipp Zabel (1):
ARM: dts: imx6q-sabrelite: PHY reset is active-low
Robert Nelson (1):
ARM: dts: imx53: Enable AHCI SATA for imx53-qsb
Rostislav Lisovy (8):
ARM: dts: i.MX53: Add alternate pinmux option for i2c_3
ARM: dts: i.MX53: Internal keyboard controller
ARM: dts: Add vendor prefix for Voipac Technologies s.r.o.
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
ARM: dts: voipac: Improve fixed voltage regulator definition
ARM: i.MX53: dts: NAND flash controller
ARM: i.MX53: dts: USB host controller
Russell King (1):
ARM: imx: initial SolidRun HummingBoard support
Shawn Guo (8):
ARM: dts: imx6qdl: make pinctrl nodes board specific
ARM: dts: imx6sl: make pinctrl nodes board specific
ARM: dts: imx53: make pinctrl nodes board specific
ARM: dts: imx51: make pinctrl nodes board specific
ARM: dts: imx50: make pinctrl nodes board specific
ARM: dts: imx53-mba53: create a container for fixed regulators
ARM: dts: imx: use generic node name for fixed regulator
ARM: dts: vf610: make pinctrl nodes board specific
Silvio F (2):
DT: Add Data Modul vendor prefix
ARM: dts: imx6: Add support for imx6q dmo edmqmx6
Steffen Trumtrar (1):
ARM: dts: Add support for the i.MX35.
Tim Harvey (3):
ARM: dts: disable flexcan by default
ARM: dts: added several new imx-pinmux groups
ARM: dts: add Gateworks Ventana support
Troy Kisky (30):
ARM: dts: imx: pinfunc: add MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT
ARM: dts: imx: imx6qdl.dtsi: add mipi_csi tag
ARM: dts: imx: imx6q.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6dl.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6sl.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH
ARM: dts: imx: imx6sl/qdl-pingrp: reorganize USDHCx pad groups
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
ARM: dts: imx6qdl-sabrelite: Add uart1 support
ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio
ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi
ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4
ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3
ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1
ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg
ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk
ARM: dts: imx6qdl-sabrelite: add pwms for backlights
ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy
ARM: dts: imx6qdl-sabrelite: fix ENET group
ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg
ARM: dts: imx: add nitrogen6x board
ARM: dts: imx6qdl-sabrelite: add gpio-keys
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
ARM: dts: imx6qdl: add pingroups for enet with GPIO6 interrupt
ARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGMII_MD
ARM: dts: imx6qdl: use interrupts-extended for fec
ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
Valentin Raevsky (1):
ARM: dts: Add initial support for cm-fx6.
.../devicetree/bindings/vendor-prefixes.txt | 3 +
arch/arm/boot/dts/Makefile | 23 +-
arch/arm/boot/dts/imx23-evk.dts | 8 +-
arch/arm/boot/dts/imx23-olinuxino.dts | 5 +-
arch/arm/boot/dts/imx23-stmp378x_devb.dts | 5 +-
arch/arm/boot/dts/imx23.dtsi | 8 +-
arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 60 ++
.../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 128 +++
arch/arm/boot/dts/imx25-pinfunc.h | 494 +++++++++++
arch/arm/boot/dts/imx25-pingrp.h | 81 ++
arch/arm/boot/dts/imx25.dtsi | 18 +-
arch/arm/boot/dts/imx27-apf27.dts | 16 +
arch/arm/boot/dts/imx27-apf27dev.dts | 98 ++-
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 50 +-
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 20 +-
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 86 +-
...ycore-som.dts => imx27-phytec-phycore-som.dtsi} | 65 +-
arch/arm/boot/dts/imx27-pinfunc.h | 526 +++++++++++
arch/arm/boot/dts/imx27-pingrp.h | 151 ++++
arch/arm/boot/dts/imx27.dtsi | 127 +--
arch/arm/boot/dts/imx28-apf28dev.dts | 18 +-
arch/arm/boot/dts/imx28-apx4devkit.dts | 5 +-
arch/arm/boot/dts/imx28-cfa10036.dts | 2 +
arch/arm/boot/dts/imx28-cfa10037.dts | 7 +-
arch/arm/boot/dts/imx28-cfa10049.dts | 31 +-
arch/arm/boot/dts/imx28-cfa10057.dts | 7 +-
arch/arm/boot/dts/imx28-cfa10058.dts | 7 +-
arch/arm/boot/dts/imx28-duckbill.dts | 121 +++
arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts | 71 ++
arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts | 50 ++
arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi | 326 +++++++
arch/arm/boot/dts/imx28-evk.dts | 24 +-
arch/arm/boot/dts/imx28-m28cu3.dts | 16 +-
arch/arm/boot/dts/imx28-m28evk.dts | 18 +-
arch/arm/boot/dts/imx28-sps1.dts | 7 +-
arch/arm/boot/dts/imx28-tx28.dts | 23 +-
arch/arm/boot/dts/imx28.dtsi | 65 +-
arch/arm/boot/dts/imx35-pingrp.h | 104 +++
arch/arm/boot/dts/imx35.dtsi | 360 ++++++++
arch/arm/boot/dts/imx50-evk.dts | 97 ++
arch/arm/boot/dts/imx50-pinfunc.h | 923 ++++++++++++++++++++
arch/arm/boot/dts/imx50-pingrp.h | 146 ++++
arch/arm/boot/dts/imx50.dtsi | 475 ++++++++++
arch/arm/boot/dts/imx51-apf51.dts | 18 +-
arch/arm/boot/dts/imx51-apf51dev.dts | 50 +-
arch/arm/boot/dts/imx51-babbage.dts | 100 ++-
arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi | 71 ++
.../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 153 ++++
arch/arm/boot/dts/imx51-pingrp.h | 249 ++++++
arch/arm/boot/dts/imx51.dtsi | 456 ++--------
arch/arm/boot/dts/imx53-ard.dts | 19 +-
arch/arm/boot/dts/imx53-evk.dts | 38 +-
arch/arm/boot/dts/imx53-m53evk.dts | 133 ++-
arch/arm/boot/dts/imx53-mba53.dts | 40 +-
arch/arm/boot/dts/imx53-pingrp.h | 352 ++++++++
arch/arm/boot/dts/imx53-qsb.dts | 65 +-
arch/arm/boot/dts/imx53-smd.dts | 62 +-
arch/arm/boot/dts/imx53-tqma53.dtsi | 112 ++-
arch/arm/boot/dts/imx53-tx53.dtsi | 5 +-
arch/arm/boot/dts/imx53-voipac-bsb.dts | 144 +++
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 240 +++++
arch/arm/boot/dts/imx53.dtsi | 649 ++------------
arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 +
arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 +
arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 +
arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 +
arch/arm/boot/dts/imx6dl-hummingboard.dts | 94 ++
arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 21 +
arch/arm/boot/dts/imx6dl-pinfunc.h | 2 +
arch/arm/boot/dts/imx6dl-sabrelite.dts | 20 +
arch/arm/boot/dts/imx6dl.dtsi | 30 +-
arch/arm/boot/dts/imx6q-arm2.dts | 73 +-
arch/arm/boot/dts/imx6q-cm-fx6.dts | 69 ++
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 178 ++++
arch/arm/boot/dts/imx6q-gw51xx.dts | 19 +
arch/arm/boot/dts/imx6q-gw52xx.dts | 23 +
arch/arm/boot/dts/imx6q-gw53xx.dts | 23 +
arch/arm/boot/dts/imx6q-gw5400-a.dts | 493 +++++++++++
arch/arm/boot/dts/imx6q-gw54xx.dts | 23 +
arch/arm/boot/dts/imx6q-nitrogen6x.dts | 25 +
arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 44 +-
arch/arm/boot/dts/imx6q-pinfunc.h | 2 +
arch/arm/boot/dts/imx6q-sabrelite.dts | 178 +---
arch/arm/boot/dts/imx6q-sbc6x.dts | 29 +-
arch/arm/boot/dts/imx6q-udoo.dts | 27 +-
arch/arm/boot/dts/imx6q.dtsi | 18 +-
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 317 +++++++
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 424 +++++++++
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 484 ++++++++++
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 511 +++++++++++
arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 58 ++
arch/arm/boot/dts/imx6qdl-microsom.dtsi | 89 ++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 382 ++++++++
arch/arm/boot/dts/imx6qdl-pingrp.h | 532 +++++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 80 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 383 ++++++++
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 208 ++++-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 70 +-
arch/arm/boot/dts/imx6qdl.dtsi | 914 +++----------------
arch/arm/boot/dts/imx6sl-evk.dts | 88 +-
arch/arm/boot/dts/imx6sl-pingrp.h | 148 ++++
arch/arm/boot/dts/imx6sl.dtsi | 366 ++------
arch/arm/boot/dts/vf610-cosmic.dts | 16 +-
arch/arm/boot/dts/vf610-pingrp.h | 127 +++
arch/arm/boot/dts/vf610-twr.dts | 34 +-
arch/arm/boot/dts/vf610.dtsi | 172 +---
arch/arm/mach-imx/mach-imx6q.c | 35 +
arch/arm/mach-mxs/mach-mxs.c | 33 +
108 files changed, 12039 insertions(+), 2730 deletions(-)
create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx25-pingrp.h
rename arch/arm/boot/dts/{imx27-phytec-phycore-som.dts => imx27-phytec-phycore-som.dtsi} (74%)
create mode 100644 arch/arm/boot/dts/imx27-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx27-pingrp.h
create mode 100644 arch/arm/boot/dts/imx28-duckbill.dts
create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
create mode 100644 arch/arm/boot/dts/imx35-pingrp.h
create mode 100644 arch/arm/boot/dts/imx35.dtsi
create mode 100644 arch/arm/boot/dts/imx50-evk.dts
create mode 100644 arch/arm/boot/dts/imx50-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx50-pingrp.h
create mode 100644 arch/arm/boot/dts/imx50.dtsi
create mode 100644 arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
create mode 100644 arch/arm/boot/dts/imx51-pingrp.h
create mode 100644 arch/arm/boot/dts/imx53-pingrp.h
create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts
create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-hummingboard.dts
create mode 100644 arch/arm/boot/dts/imx6dl-nitrogen6x.dts
create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts
create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
create mode 100644 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6x.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-microsom.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-pingrp.h
create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
create mode 100644 arch/arm/boot/dts/imx6sl-pingrp.h
create mode 100644 arch/arm/boot/dts/vf610-pingrp.h
More information about the linux-arm-kernel
mailing list