[PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support

Simon Horman horms at verge.net.au
Thu Dec 19 02:10:26 EST 2013


On Sat, Dec 14, 2013 at 12:50:58PM +0900, Simon Horman wrote:
> On Sat, Dec 14, 2013 at 03:27:23AM +0100, Laurent Pinchart wrote:
> > Hi Simon,
> > 
> > On Saturday 14 December 2013 11:19:01 Simon Horman wrote:
> > > On Sat, Dec 14, 2013 at 11:11:14AM +0900, Simon Horman wrote:
> > > > On Sat, Dec 14, 2013 at 02:41:44AM +0100, Laurent Pinchart wrote:
> > > > > On Saturday 14 December 2013 10:26:24 Simon Horman wrote:
> > > > > > [ CC Magnus ]
> > > > > > 
> > > > > > On Wed, Dec 11, 2013 at 03:05:11PM +0100, Laurent Pinchart wrote:
> > > > > > > Hello,
> > > > > > > 
> > > > > > > This is a repost of the arch patches from the "[PATCH v3 0/8]
> > > > > > > Renesas R-Car Gen2 Common Clock Framework support" patch series. The
> > > > > > > first three patches in that series have been reposted separately in
> > > > > > > the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework
> > > > > > > drivers" series to get merged through Mike Turquette's tree, while
> > > > > > > this series will go through the ARM SoC tree.
> > > > > > > 
> > > > > > > I've asked Mike to provide a stable branch when merging the CCF
> > > > > > > driver patches.
> > > > > > > 
> > > > > > > Laurent Pinchart (5):
> > > > > > >   ARM: shmobile: r8a7790: Add clock index macros for DT sources
> > > > > > >   ARM: shmobile: r8a7791: Add clock index macros for DT sources
> > > > > > >   ARM: shmobile: r8a7790: Add clocks
> > > > > > >   ARM: shmobile: r8a7790: Reference clocks
> > > > > > >   ARM: shmobile: r8a7791: Add clocks
> > > > > > >  
> > > > > > >  arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++
> > > > > > >  arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++
> > > > > > >  include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
> > > > > > >  include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
> > > > > > >  4 files changed, 846 insertions(+)
> > > > > > >  create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
> > > > > > >  create mode 100644 include/dt-bindings/clock/r8a7791-clock.h
> > > > > > 
> > > > > > Hi Laurent,
> > > > > > 
> > > > > > I would like to confirm the dependencies of this series with you.
> > > > > > As I understand things the dependencies that were not present
> > > > > > in renesas-devel-v3.13-rc2-20131211 are as follows.
> > > > > > 
> > > > > > If any of the patches below can be skipped without breaking this
> > > > > > series or the followup series "[PATCH v4 00/16] Lager and Koelsch
> > > > > > multiplatform support" then I am all for not treating them as
> > > > > > dependencies at all.
> > > > > > 
> > > > > > 
> > > > > > * [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
> > > > > >   Status: Waiting for response from Mike Turquette
> > > > > 
> > > > > The dependency is correct, but the status has changed. Mike has merged
> > > > > the patches in his tree in the clk-next-shmobile branch
> > > > > (https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/he
> > > > > ads/clk-next-shmobile).
> > > >
> > > > Great!
> > > > 
> > > > > > * mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
> > > > > >   Status: Merged by Chris Ball. I believe we need a stable branch from
> > > > > >   him.
> > > > > 
> > > > > You can drop this dependency as the koelsch reference boards lack SDHI
> > > > > support and the lager reference board has the SDHI devices disabled.
> > > > 
> > > > Thanks, got it.
> > > > 
> > > > > > * spi: sh-msiof: Convert to clk_prepare/unprepare
> > > > > >   spi: sh-msiof: Use devm_* managed allocators
> > > > > >   Status: Merged by Mark Brown. I believe we need a stable branch from
> > > > > >   him.
> > > > > 
> > > > > You can drop this dependency as the lager and koelsch reference boards
> > > > > lack SPI support.
> > > > > 
> > > > > > * usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
> > > > > >   Status: In Felipe Balbi's next branch. It is stable, right?
> > > > > 
> > > > > Correct, but you can drop this dependency as the lager and koelsch
> > > > > reference boards lack USB support.
> > > > 
> > > > Understood.
> > > > 
> > > > > > * clocksource: sh_tmu: Add clk_prepare/unprepare support
> > > > > >   clocksource: sh_tmu: Release clock when sh_tmu_register() fails
> > > > > >   clocksource: sh_mtu2: Add clk_prepare/unprepare support
> > > > > >   clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
> > > > > >   Status: Present in v3.13-rc3. No problem!
> > > > > > 
> > > > > > * clocksource: sh_cmt: Add clk_prepare/unprepare support
> > > > > >   Status: I think I have dropped the ball here.
> > > > > >           Regardless, I think it it needs to be accepted by Daniel
> > > > > >           Lezcano
> > > > > 
> > > > > That's the only missing one. Do you plan to handle this with Daniel ?
> > > > 
> > > > Yes, I will ask him to pick it up ASAP. Sorry for the mess there.
> > > 
> > > Hi,
> > > 
> > > I think I may have found the reason that I dropped the ball,
> > > which is that I was waiting for v2 of the patch but never saw it.
> > > 
> > > In order to stop me making a further mess of this would
> > > you be able to re-post it to Daniel directly?
> > 
> > When I mentioned v2 for the clocksource patches ("Re: [PATCH 01/12] 
> > clocksource: sh_cmt: Add clk_prepare/unprepare support", Date: 30/10/2013 
> > 01:13) I meant v2 of the whole series. The sh_tmu and sh_mtu2 patches required 
> > a v2, but the sh_tmu patch didn't. v1 is thus the correct one. Do I need to 
> > resend it, or can you take it from the list ?
> 
> I can take it.

Daniel has taken the patch and provided a branch.

I will queue up this series accordingly.



More information about the linux-arm-kernel mailing list