[RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"
Dinh Nguyen
dinh.linux at gmail.com
Tue Dec 17 08:44:47 EST 2013
Hi Zhangfei,
On 12/17/13 1:46 AM, zhangfei wrote:
>
>
> On 12/17/2013 01:04 AM, dinguyen at altera.com wrote:
>> From: Dinh Nguyen <dinguyen at altera.com>
>
>> +static int socfpga_clk_prepare(struct clk_hw *hwclk)
>> +{
>> + struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk);
>> + struct regmap *sys_mgr_base_addr;
>> + u32 hs_timing;
>> +
>> + if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
>> + sys_mgr_base_addr =
>> syscon_regmap_lookup_by_compatible("altr,sys-mgr");
>> + if (IS_ERR(sys_mgr_base_addr)) {
>> + pr_err("%s: failed to find altr,sys-mgr regmap!\n",
>> __func__);
>> + return -EINVAL;
>> + }
>> + hs_timing = SYSMGR_SDMMC_CTRL_SET(socfpgaclk->clk_phase[0],
>> + socfpgaclk->clk_phase[1]);
>> + regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET,
>> + hs_timing);
>> + }
>> + return 0;
>> +}
>
> So reusing gate-clk here and check the node of "altr,sys-mgr".
> I think it is good and simple.
> Also can define new clock combined with node "altr,sys-mgr" with
> parent of sdmmc_clk.
>
> Thanks for the update, it is fine to me.
Thanks, can I get an Ack from you for this version?
Thanks,
Dinh
>
>> +
>> static struct clk_ops gateclk_ops = {
>> + .prepare = socfpga_clk_prepare,
>> .recalc_rate = socfpga_clk_recalc_rate,
>> .get_parent = socfpga_clk_get_parent,
>> .set_parent = socfpga_clk_set_parent,
>> @@ -254,6 +283,7 @@ static void __init socfpga_gate_clk_init(struct
>> device_node *node,
>> {
>> u32 clk_gate[2];
>> u32 div_reg[3];
>> + u32 clk_phase[2];
>> u32 fixed_div;
>> struct clk *clk;
>> struct socfpga_clk *socfpga_clk;
>> @@ -294,6 +324,12 @@ static void __init socfpga_gate_clk_init(struct
>> device_node *node,
>> socfpga_clk->div_reg = 0;
>> }
>>
>> + rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
>> + if (!rc) {
>> + socfpga_clk->clk_phase[0] = clk_phase[0];
>> + socfpga_clk->clk_phase[1] = clk_phase[1];
>> + }
>> +
>> of_property_read_string(node, "clock-output-names", &clk_name);
>>
>> init.name = clk_name;
>>
More information about the linux-arm-kernel
mailing list