[PATCH V2 02/13] ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4

[Troy Kisky]

This patch moves pin NANDF_D6 (CD) from pinctrl_hog to pinctrl_usdhc4.
It also explicitly sets the pad to 0x1b0b0, which is also the value
that it has before this patch if using mainline u-boot.

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>

---
v2: New patch.. V1 patch to add comments was broken up into
multiple patches
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 5394e02..8bb910b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,7 +114,6 @@
 	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
 				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
@@ -157,7 +156,10 @@
 		};
 
 		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <MX6QDL_USDHC4_PINGRP_D4>;
+			fsl,pins = <
+				MX6QDL_USDHC4_PINGRP_D4
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
 		};
 	};
 };
-- 
1.8.1.2