[PATCH 04/12] ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled
Heiko Stübner
heiko at sntech.de
Fri Dec 13 08:00:02 EST 2013
Add platform device and select the correct implementation automatically
depending on wether the old samsung_clock or the common clock framework
is enabled.
This is only done for machines already using the old dclk implementation,
as everybody else should move to use dt anyway.
The machine-specific settings for the external clocks will have to be set
by somebody with knowledge about the specific hardware.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 22 +++++++++++++++++-----
arch/arm/mach-s3c24xx/common.c | 14 ++++++++++++++
arch/arm/mach-s3c24xx/common.h | 2 ++
arch/arm/mach-s3c24xx/mach-anubis.c | 5 +++++
arch/arm/mach-s3c24xx/mach-bast.c | 5 +++++
arch/arm/mach-s3c24xx/mach-osiris.c | 5 +++++
arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +++++
arch/arm/mach-s3c24xx/mach-vr1000.c | 5 +++++
arch/arm/mach-s3c24xx/pm.c | 6 ++++++
arch/arm/mach-s3c24xx/s3c244x.c | 2 ++
10 files changed, 66 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 397c440..b06a7a3 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -18,6 +18,13 @@ config PLAT_S3C24XX
help
Base platform code for any Samsung S3C24XX device
+config S3C2410_COMMON_DCLK
+ bool
+ select REGMAP_MMIO
+ help
+ Temporary symbol to build the dclk driver based on the common clock
+ framework.
+
menu "SAMSUNG S3C24XX SoCs Support"
comment "S3C24XX SoCs"
@@ -284,7 +291,8 @@ config ARCH_BAST
select ISA
select MACH_BAST_IDE
select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
- select S3C24XX_DCLK
+ select S3C24XX_DCLK if SAMSUNG_CLOCK
+ select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
@@ -365,7 +373,8 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select MACH_BAST_IDE
- select S3C24XX_DCLK
+ select S3C24XX_DCLK if SAMSUNG_CLOCK
+ select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
@@ -545,7 +554,8 @@ config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select HAVE_PATA_PLATFORM
select S3C2440_XTAL_12000000
- select S3C24XX_DCLK
+ select S3C24XX_DCLK if SAMSUNG_CLOCK
+ select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_GPIO_EXTRA64
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
@@ -586,7 +596,8 @@ config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
- select S3C24XX_DCLK
+ select S3C24XX_DCLK if SAMSUNG_CLOCK
+ select S3C2410_COMMON_DCLK if COMMON_CLK
select S3C24XX_GPIO_EXTRA128
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
@@ -658,7 +669,8 @@ config MACH_RX1950
select PM_H1940 if PM
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
- select S3C24XX_DCLK
+ select S3C24XX_DCLK if SAMSUNG_CLOCK
+ select S3C24XX_COMMON_DCLK if COMMON_CLK
select S3C24XX_PWM
select S3C_DEV_NAND
help
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 015e6c0..051ed5e 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -549,3 +549,17 @@ void __init s3c2443_init_clocks(int xtal)
s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
}
#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+ [0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+ .name = "s3c2410-dclk",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dclk_resource),
+ .resource = s3c2410_dclk_resource,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index d7323f1..e16b601 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -114,6 +114,8 @@ extern struct platform_device s3c2412_device_dma;
extern struct platform_device s3c2440_device_dma;
extern struct platform_device s3c2443_device_dma;
+extern struct platform_device s3c2410_device_dclk;
+
#ifdef CONFIG_S3C2443_COMMON_CLK
void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
int current_soc,
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index c1fb6c3..a7d1721a 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -351,6 +351,7 @@ static struct platform_device anubis_device_sm501 = {
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
@@ -363,6 +364,7 @@ static struct platform_device *anubis_devices[] __initdata = {
&anubis_device_sm501,
};
+#ifdef CONFIG_SAMSUNG_CLOCK
static struct clk *anubis_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
@@ -370,6 +372,7 @@ static struct clk *anubis_clocks[] __initdata = {
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
+#endif
/* I2C devices. */
@@ -393,6 +396,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
static void __init anubis_map_io(void)
{
+#ifdef CONFIG_SAMSUNG_CLOCK
/* initialise the clocks */
s3c24xx_dclk0.parent = &clk_upll;
@@ -407,6 +411,7 @@ static void __init anubis_map_io(void)
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
+#endif
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 22d6ae9..d5d67c5 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -522,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -536,6 +537,7 @@ static struct platform_device *bast_devices[] __initdata = {
&bast_sio,
};
+#ifdef CONFIG_SAMSUNG_CLK
static struct clk *bast_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
@@ -543,6 +545,7 @@ static struct clk *bast_clocks[] __initdata = {
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
+#endif
static struct s3c_cpufreq_board __initdata bast_cpufreq = {
.refresh = 7800, /* 7.8usec */
@@ -557,6 +560,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
static void __init bast_map_io(void)
{
+#ifdef CONFIG_SAMSUNG_CLOCK
/* initialise the clocks */
s3c24xx_dclk0.parent = &clk_upll;
@@ -571,6 +575,7 @@ static void __init bast_map_io(void)
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
+#endif
s3c_hwmon_set_platdata(&bast_hwmon_info);
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 58d6fbe..d55d88d 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -343,12 +343,14 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_i2c0,
&s3c_device_wdt,
&s3c_device_nand,
&osiris_pcmcia,
};
+#ifdef CONFIG_SAMSUNG_CLOCK
static struct clk *osiris_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
@@ -356,6 +358,7 @@ static struct clk *osiris_clocks[] __initdata = {
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
+#endif
static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
.refresh = 7800, /* refresh period is 7.8usec */
@@ -367,6 +370,7 @@ static void __init osiris_map_io(void)
{
unsigned long flags;
+#ifdef CONFIG_SAMSUNG_CLOCK
/* initialise the clocks */
s3c24xx_dclk0.parent = &clk_upll;
@@ -381,6 +385,7 @@ static void __init osiris_map_io(void)
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
+#endif
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 034b7fe..a0f12d1 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -708,6 +708,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
};
static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
@@ -726,17 +727,21 @@ static struct platform_device *rx1950_devices[] __initdata = {
&rx1950_leds,
};
+#ifdef CONFIG_SAMSUNG_CLOCK
static struct clk *rx1950_clocks[] __initdata = {
&s3c24xx_clkout0,
&s3c24xx_clkout1,
};
+#endif
static void __init rx1950_map_io(void)
{
+#ifdef CONFIG_SAMSUNG_CLOCK
s3c24xx_clkout0.parent = &clk_h;
s3c24xx_clkout1.parent = &clk_f;
s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+#endif
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 42e7187..8221988 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -285,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -298,6 +299,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
&vr1000_led3,
};
+#ifdef CONFIG_SAMSUNG_CLOCK
static struct clk *vr1000_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
@@ -305,6 +307,7 @@ static struct clk *vr1000_clocks[] __initdata = {
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
+#endif
static void vr1000_power_off(void)
{
@@ -313,6 +316,7 @@ static void vr1000_power_off(void)
static void __init vr1000_map_io(void)
{
+#if CONFIG_SAMSUNG_CLOCK
/* initialise clock sources */
s3c24xx_dclk0.parent = &clk_upll;
@@ -327,6 +331,7 @@ static void __init vr1000_map_io(void)
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
+#endif
pm_power_off = vr1000_power_off;
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index caa5b72..75181db 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -78,9 +78,11 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_CLKSLOW),
};
+#ifdef CONFIG_SAMSUNG_CLOCK
static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
+#endif
/* s3c_pm_check_resume_pin
*
@@ -139,12 +141,16 @@ void s3c_pm_configure_extint(void)
void s3c_pm_restore_core(void)
{
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+#ifdef CONFIG_SAMSUNG_CLOCK
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+#endif
}
void s3c_pm_save_core(void)
{
+#ifdef CONFIG_SAMSUNG_CLOCK
s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+#endif
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 911b555..0ce2538 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -46,6 +46,7 @@
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
+#include "common.h"
#include "regs-dsc.h"
static struct map_desc s3c244x_iodesc[] __initdata = {
@@ -74,6 +75,7 @@ void __init s3c244x_map_io(void)
s3c_nand_setname("s3c2440-nand");
s3c_device_ts.name = "s3c2440-ts";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
+ s3c2410_device_dclk.name = "s3c2440-dclk";
}
void __init_or_cpufreq s3c244x_setup_clocks(void)
--
1.7.10.4
More information about the linux-arm-kernel
mailing list