[PATCH v2 2/2] ARM: DT: Kirkwood: Use symbolic names from gpio.h
Andrew Lunn
andrew at lunn.ch
Wed Dec 4 10:51:39 EST 2013
Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/boot/dts/kirkwood-cloudbox.dts | 8 +++----
arch/arm/boot/dts/kirkwood-db.dtsi | 4 ++--
arch/arm/boot/dts/kirkwood-dns320.dts | 10 ++++-----
arch/arm/boot/dts/kirkwood-dns325.dts | 10 ++++-----
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 12 +++++-----
arch/arm/boot/dts/kirkwood-dockstar.dts | 4 ++--
arch/arm/boot/dts/kirkwood-dreamplug.dts | 6 ++---
arch/arm/boot/dts/kirkwood-goflexnet.dts | 22 +++++++++---------
.../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 8 +++----
arch/arm/boot/dts/kirkwood-ib62x0.dts | 12 +++++-----
arch/arm/boot/dts/kirkwood-iconnect.dts | 20 ++++++++---------
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 14 ++++++------
arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 4 ++--
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 22 +++++++++---------
arch/arm/boot/dts/kirkwood-mplcec4.dts | 14 ++++++------
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 10 ++++-----
.../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 1 -
.../boot/dts/kirkwood-netgear_readynas_nv+_v2.dts | 1 -
arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 6 ++---
arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +-
arch/arm/boot/dts/kirkwood-ns2max.dts | 10 ++++-----
arch/arm/boot/dts/kirkwood-ns2mini.dts | 10 ++++-----
arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 4 ++--
arch/arm/boot/dts/kirkwood-nsa310.dts | 26 +++++++++++-----------
arch/arm/boot/dts/kirkwood-nsa310a.dts | 24 ++++++++++----------
arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 8 +++----
arch/arm/boot/dts/kirkwood-openblocks_a7.dts | 8 +++----
arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts | 6 ++---
arch/arm/boot/dts/kirkwood-sheevaplug.dts | 4 ++--
arch/arm/boot/dts/kirkwood-topkick.dts | 10 ++++-----
arch/arm/boot/dts/kirkwood-ts219-6281.dts | 4 ++--
arch/arm/boot/dts/kirkwood-ts219-6282.dts | 4 ++--
arch/arm/boot/dts/kirkwood.dtsi | 1 +
33 files changed, 154 insertions(+), 155 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 17123f25e2db..bb4df405527c 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -67,7 +67,7 @@
button at 1 {
label = "Power push button";
linux,code = <KEY_POWER>;
- gpios = <&gpio0 16 1>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
@@ -76,17 +76,17 @@
red-fail {
label = "cloudbox:red:fail";
- gpios = <&gpio0 14 0>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
blue-sata {
label = "cloudbox:blue:sata";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
- gpios = <&gpio0 17 0>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index 053aa20fb30f..afebc1570318 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -51,8 +51,8 @@
mvsdio at 90000 {
pinctrl-0 = <&pmx_sdio_gpios>;
pinctrl-names = "default";
- wp-gpios = <&gpio1 5 0>;
- cd-gpios = <&gpio1 6 0>;
+ wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index ff13b9397c8a..bf7fe8ab88f4 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -24,24 +24,24 @@
blue-power {
label = "dns320:blue:power";
- gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
blue-usb {
label = "dns320:blue:usb";
- gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
orange-l_hdd {
label = "dns320:orange:l_hdd";
- gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
orange-r_hdd {
label = "dns320:orange:r_hdd";
- gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
orange-usb {
label = "dns320:orange:usb";
- gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index f4330434b6ff..cb9978c652f2 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -24,24 +24,24 @@
white-power {
label = "dns325:white:power";
- gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
white-usb {
label = "dns325:white:usb";
- gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
};
red-l_hdd {
label = "dns325:red:l_hdd";
- gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
red-r_hdd {
label = "dns325:red:r_hdd";
- gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
red-usb {
label = "dns325:red:usb";
- gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 1d680d11f629..12087566ac6d 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -16,17 +16,17 @@
button at 1 {
label = "Power button";
linux,code = <KEY_POWER>;
- gpios = <&gpio1 2 1>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
button at 2 {
label = "USB unmount button";
linux,code = <KEY_EJECTCD>;
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
button at 3 {
label = "Reset button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
@@ -35,8 +35,8 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default";
- gpios = <&gpio1 14 1
- &gpio1 13 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW
+ &gpio1 13 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 0
3000 1
6000 2>;
@@ -46,7 +46,7 @@
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
ocp at f1000000 {
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index a5f1e3942f57..2a41c75c5c21 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -42,12 +42,12 @@
health {
label = "status:green:health";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
fault {
label = "status:orange:fault";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
regulators {
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 6f62af99c9cb..a7558375e06f 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -87,15 +87,15 @@
bluetooth {
label = "dreamplug:blue:bluetooth";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wifi {
label = "dreamplug:green:wifi";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wifi-ap {
label = "dreamplug:green:wifi_ap";
- gpios = <&gpio1 17 1>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index a9e98c979654..c2e512953570 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -85,44 +85,44 @@
health {
label = "status:green:health";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
fault {
label = "status:orange:fault";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
left0 {
label = "status:white:left0";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
left1 {
label = "status:white:left1";
- gpios = <&gpio1 11 0>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
left2 {
label = "status:white:left2";
- gpios = <&gpio1 12 0>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
left3 {
label = "status:white:left3";
- gpios = <&gpio1 13 0>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
right0 {
label = "status:white:right0";
- gpios = <&gpio1 6 0>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
right1 {
label = "status:white:right1";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
right2 {
label = "status:white:right2";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
right3 {
label = "status:white:right3";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
};
regulators {
@@ -141,7 +141,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 0>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 4d2a70fcdcc4..0b557d5cb723 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -60,19 +60,19 @@
health-r {
label = "guruplug:red:health";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
health-g {
label = "guruplug:green:health";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wmode-r {
label = "guruplug:red:wmode";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wmode-g {
label = "guruplug:green:wmode";
- gpios = <&gpio1 17 1>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index c376b756cbf2..6ccc78866e6d 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -64,12 +64,12 @@
button at 1 {
label = "USB Copy";
linux,code = <KEY_COPY>;
- gpios = <&gpio0 29 1>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
button at 2 {
label = "Reset";
linux,code = <KEY_RESTART>;
- gpios = <&gpio0 28 1>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
@@ -81,16 +81,16 @@
green-os {
label = "ib62x0:green:os";
- gpios = <&gpio0 25 0>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
red-os {
label = "ib62x0:red:os";
- gpios = <&gpio0 22 0>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
usb-copy {
label = "ib62x0:red:usb_copy";
- gpios = <&gpio0 27 0>;
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
@@ -98,7 +98,7 @@
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
- gpios = <&gpio0 24 0>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52ed7519f647..f7636291de77 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -94,37 +94,37 @@
led-level {
label = "led_level";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
power-blue {
label = "power:blue";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power-red {
label = "power:red";
- gpios = <&gpio1 11 0>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "usb1:blue";
- gpios = <&gpio1 12 0>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "usb2:blue";
- gpios = <&gpio1 13 0>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "usb3:blue";
- gpios = <&gpio1 14 0>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
usb4 {
label = "usb4:blue";
- gpios = <&gpio1 15 0>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
otb {
label = "otb:blue";
- gpios = <&gpio1 16 0>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
};
@@ -138,13 +138,13 @@
button at 1 {
label = "OTB Button";
linux,code = <KEY_COPY>;
- gpios = <&gpio1 3 1>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
button at 2 {
label = "Reset";
linux,code = <KEY_RESTART>;
- gpios = <&gpio0 12 1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index cdee76904cc4..589000631b5a 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -127,20 +127,20 @@
power_led {
label = "status:white:power_led";
- gpios = <&gpio0 16 0>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rebuild_led {
label = "status:white:rebuild_led";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
health_led {
label = "status:red:health_led";
- gpios = <&gpio1 5 0>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
backup_led {
label = "status:blue:backup_led";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
@@ -155,17 +155,17 @@
Power {
label = "Power Button";
linux,code = <KEY_POWER>;
- gpios = <&gpio0 14 1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
Reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio0 12 1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
OTB {
label = "OTB Button";
linux,code = <KEY_COPY>;
- gpios = <&gpio1 3 1>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index cd44f37e54b5..5b5808ebc6e0 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -38,8 +38,8 @@
i2c at 0 {
compatible = "i2c-gpio";
- gpios = < &gpio0 8 0 /* sda */
- &gpio0 9 0 >; /* scl */
+ gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */
+ &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index b284474a1cd1..fc1cd3b7b968 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -109,19 +109,19 @@
button at 1 {
label = "Function Button";
linux,code = <KEY_OPTION>;
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
button at 2 {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
- gpios = <&gpio1 10 1>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
button at 3 {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@@ -134,28 +134,28 @@
led at 1 {
label = "lsxl:blue:func";
- gpios = <&gpio1 4 1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
led at 2 {
label = "lsxl:red:alarm";
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
led at 3 {
label = "lsxl:amber:info";
- gpios = <&gpio1 6 1>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
led at 4 {
label = "lsxl:blue:power";
- gpios = <&gpio1 7 1>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
led at 5 {
label = "lsxl:red:func";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
@@ -163,13 +163,13 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
- gpios = <&gpio0 19 1
- &gpio0 18 1>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+ &gpio0 18 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 3
1500 2
3250 1
5000 0>;
- alarm-gpios = <&gpio1 8 0>;
+ alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
restart_poweroff {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 6c1ec2786e6e..c20607cd7d7c 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -110,7 +110,7 @@
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
pinctrl-names = "default";
status = "okay";
- cd-gpios = <&gpio1 15 1>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
/* No WP GPIO */
};
};
@@ -126,36 +126,36 @@
health {
label = "status:green:health";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
user1o {
label = "user1:orange";
- gpios = <&gpio1 8 1>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user1g {
label = "user1:green";
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0o {
label = "user0:orange";
- gpios = <&gpio1 12 1>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0g {
label = "user0:green";
- gpios = <&gpio1 13 1>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
misc {
label = "status:orange:misc";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index ade432466c85..dc86429756d7 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -90,17 +90,17 @@
green-status {
label = "gtw:green:Status";
- gpios = <&gpio0 20 0>;
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
};
red-status {
label = "gtw:red:Status";
- gpios = <&gpio0 21 0>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "gtw:green:USB";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
};
@@ -114,12 +114,12 @@
button at 1 {
label = "SWR Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
button at 2 {
label = "WPS Button";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index 57e08b3003a1..4d2a8db9ab77 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -11,7 +11,6 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index 3ce9f631b572..7c8a0d9d8d1f 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -11,7 +11,6 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 3101aecdcc0a..ae1ccbe41029 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -65,7 +65,7 @@
button at 1 {
label = "Power push button";
linux,code = <KEY_POWER>;
- gpios = <&gpio1 0 0>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
};
@@ -74,13 +74,13 @@
red-fail {
label = "ns2:red:fail";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
- gpios = <&gpio0 31 0>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index 7cea2a44719c..1f2ca60d8b3d 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -25,7 +25,7 @@
blue-sata {
label = "ns2:blue:sata";
- gpios = <&gpio0 30 1>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
linux,default-trigger = "ide-disk";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index defdc77fb550..72c78d0b1116 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -22,10 +22,10 @@
gpio_fan {
compatible = "gpio-fan";
- gpios = <&gpio0 22 1
- &gpio0 7 1
- &gpio1 1 1
- &gpio0 23 1>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+ &gpio0 7 GPIO_ACTIVE_LOW
+ &gpio1 1 GPIO_ACTIVE_LOW
+ &gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
< 0 0
1500 15
@@ -36,7 +36,7 @@
3300 10
4300 9
5500 8>;
- alarm-gpios = <&gpio0 25 1>;
+ alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
ns2-leds {
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index adbafdd90991..c441bf62c09f 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -23,10 +23,10 @@
gpio_fan {
compatible = "gpio-fan";
- gpios = <&gpio0 22 1
- &gpio0 7 1
- &gpio1 1 1
- &gpio0 23 1>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+ &gpio0 7 GPIO_ACTIVE_LOW
+ &gpio1 1 GPIO_ACTIVE_LOW
+ &gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
< 0 0
3000 15
@@ -37,7 +37,7 @@
7140 10
7980 9
9200 8>;
- alarm-gpios = <&gpio0 25 1>;
+ alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
ns2-leds {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
index e3f915defd3d..aa78c2d11fe7 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -40,7 +40,7 @@
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
- gpios = <&gpio1 16 0>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
regulators {
@@ -58,7 +58,7 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 21 0>;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index c45a26ce8b57..03fa24cf3344 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -120,17 +120,17 @@
button at 1 {
label = "Power Button";
linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 0>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
button at 2 {
label = "Copy Button";
linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
button at 3 {
label = "Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
@@ -145,43 +145,43 @@
green-sys {
label = "nsa310:green:sys";
- gpios = <&gpio0 28 0>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
red-sys {
label = "nsa310:red:sys";
- gpios = <&gpio0 29 0>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd {
label = "nsa310:green:hdd";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
red-hdd {
label = "nsa310:red:hdd";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
green-esata {
label = "nsa310:green:esata";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
red-esata {
label = "nsa310:red:esata";
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310:green:usb";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
red-usb {
label = "nsa310:red:usb";
- gpios = <&gpio0 16 0>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310:green:copy";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
red-copy {
label = "nsa310:red:copy";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index 874df7d26c7c..a5e779452867 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -108,17 +108,17 @@
button at 1 {
label = "Power Button";
linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 0>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
button at 2 {
label = "Copy Button";
linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
button at 3 {
label = "Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
@@ -127,39 +127,39 @@
green-sys {
label = "nsa310:green:sys";
- gpios = <&gpio0 28 0>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
red-sys {
label = "nsa310:red:sys";
- gpios = <&gpio0 29 0>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd {
label = "nsa310:green:hdd";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
red-hdd {
label = "nsa310:red:hdd";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
green-esata {
label = "nsa310:green:esata";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
red-esata {
label = "nsa310:red:esata";
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310:green:usb";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310:green:copy";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
red-copy {
label = "nsa310:red:copy";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 6c171e067b59..5c6a4f1b4e93 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -101,17 +101,17 @@
led-red {
label = "obsa6:red:stat";
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
led-green {
label = "obsa6:green:stat";
- gpios = <&gpio1 10 1>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
led-yellow {
label = "obsa6:yellow:stat";
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@@ -125,7 +125,7 @@
button at 1 {
label = "Init Button";
linux,code = <KEY_POWER>;
- gpios = <&gpio1 6 0>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index c97bad46c29c..c054ef61cff5 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -126,17 +126,17 @@
led-red {
label = "obsa7:red:stat";
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
led-green {
label = "obsa7:green:stat";
- gpios = <&gpio1 10 1>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
led-yellow {
label = "obsa7:yellow:stat";
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@@ -150,7 +150,7 @@
button at 1 {
label = "Init Button";
linux,code = <KEY_POWER>;
- gpios = <&gpio1 6 0>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
index ce9b3be237f9..e2b4ea4f9e10 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -24,8 +24,8 @@
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
pinctrl-names = "default";
status = "okay";
- cd-gpios = <&gpio1 12 1>;
- wp-gpios = <&gpio1 15 0>;
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
};
@@ -36,7 +36,7 @@
health {
label = "sheevaplug:blue:health";
- gpios = <&gpio1 17 1>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
index c01f9c765aa2..82f6abf120fd 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -31,13 +31,13 @@
health {
label = "sheevaplug:blue:health";
- gpios = <&gpio1 17 1>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
misc {
label = "sheevaplug:red:misc";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 320da677b984..40d6adf678ca 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -131,25 +131,25 @@
disk {
label = "topkick:yellow:disk";
- gpios = <&gpio0 21 1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "ide-disk";
};
system2 {
label = "topkick:red:system";
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
system {
label = "topkick:blue:system";
- gpios = <&gpio1 6 1>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wifi {
label = "topkick:green:wifi";
- gpios = <&gpio1 7 1>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "topkick:yellow:wifi";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
regulators {
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index 89f7094117f4..c17ae45e19be 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -42,12 +42,12 @@
button at 1 {
label = "USB Copy";
linux,code = <KEY_COPY>;
- gpios = <&gpio0 15 1>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
button at 2 {
label = "Reset";
linux,code = <KEY_RESTART>;
- gpios = <&gpio0 16 1>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 6976afb56605..0713d072758a 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -52,12 +52,12 @@
button at 1 {
label = "USB Copy";
linux,code = <KEY_COPY>;
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
button at 2 {
label = "Reset";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 477c0b5553e8..dd58a25a4166 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,5 +1,6 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
--
1.8.5
More information about the linux-arm-kernel
mailing list