[PATCH v9 02/12] usb: phy-mxs: Add platform judgement code

Peter Chen peter.chen at freescale.com
Thu Dec 26 21:38:31 EST 2013


The mxs-phy has several bugs and features at different
versions, the driver code can get it through of_device_id.data.

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 drivers/usb/phy/phy-mxs-usb.c |   58 ++++++++++++++++++++++++++++++++++------
 1 files changed, 49 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 545844b..6d49040 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <marex at denx.de>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -34,13 +35,55 @@
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is a wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORMAL_IN_SUSPEND		BIT(1)
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
+
+struct mxs_phy_data {
+	unsigned int flags;
+};
+
+static const struct mxs_phy_data imx23_phy_data = {
+	.flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};
+
+static const struct mxs_phy_data imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	const struct mxs_phy_data *data;
 };
 
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
-
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
 	int ret;
@@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(mxs_phy_dt_ids, &pdev->dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
 	mxs_phy->clk = clk;
+	mxs_phy->data = of_id->data;
 
 	platform_set_drvdata(pdev, mxs_phy);
 
@@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mxs_phy_dt_ids[] = {
-	{ .compatible = "fsl,imx23-usbphy", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
-
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
 	.remove = mxs_phy_remove,
-- 
1.7.8





More information about the linux-arm-kernel mailing list