[PATCH v6 00/16] ARM: at91: move to common clk framework

boris brezillon b.brezillon at overkiz.com
Mon Dec 2 06:43:01 EST 2013


Hi Mike,

Le 01/12/2013 00:05, Mike Turquette a écrit :
> Quoting Boris BREZILLON (2013-11-28 04:36:24)
>> Hello,
>>
>> This patch series is the 5th version of the at91 clk implementations
>> using the Common Clk Framework.
> Oops, I just replied to v5 of this series. Thanks for the fixes. Which
> tree do you want this to go through?

I'm not sure: the "ARM: at91: move to common clk framework" series
depends on this one.

Nicolas, what do you think ?
Do you want to take it into your tree ?

> Regards,
> Mike
>
>> Most of the clock provided by the PMC (Power Management Controller) are
>> implemented :
>> - main clock (main oscillator)
>> - pll clocks
>> - master clock
>> - programmable clocks
>> - utmi clock
>> - peripheral clocks
>> - system clocks
>>
>> Actually some clk drivers are missing (slow clk, main clk and processor
>> clk), and some drivers only implement a subset of the hardware capabilities
>> (master clk rate change is missing).
>> But this series implements all the already available clks, and I will hopefully
>> add missing features in a near future.
>>
>> This implementation is only compatible with device tree definition.
>> The goal is to define the whole clock tree using the device tree.
>>
>> Just a note to let you know these bindings are currently unstable and might
>> change in the future.
>>
>>
>> Best Regards,
>> Boris
>>
>> Changes since v5:
>>   - remove peripheral divisors macros from dt binding include file
>>   - remove file path from comment blocks
>>   - replace pll and utmi disable function by unprepare function to
>>     avoid issue when disabling and reenabling a clk
>>   - fix programmable clk interrupt retrieval
>>   - fix OF_CLK_DECLARE names (xxx_clk_main -> xxx_clk_pmc)
>>   - add missing comma in at91rm9200 main clk dt declaration
>>   - fix num_parents check in smd clk driver
>>
>> Changes since v4:
>>   - rework dt bindings:
>>     * replace "atmel,clk-id" property by the standard "reg" property
>>     * reference system, peripheral and programmable clks using the direct
>>       clk node instead of the parent node plus a clk id
>>   - provide a new helper function (of_at91_get_clk_range) to retrieve a clk
>>     range from the device tree
>>
>> Changes since v3:
>>   - simplify master clk implementation (drop set_rate/parent support)
>>   - fix bug in set_rate function of pll driver
>>   - fix coding style issues
>>   - define macros and constants where needed
>>   - remove peripheral id macro references
>>   - remove sam9g35 specific handling (sam9g35 = sam9x5)
>>   - rework main clk prepare function to handle automatic rate calculation
>>
>> Changes since v2:
>>   - fix several bugs in clk implementations
>>   - drop non-dt boards support
>>   - split the series to ease review and tests:
>>     * 1 patch series for new clk implementations (this series)
>>     * 1 patch series to move each at91 SoC to common clk framework (coming soon)
>>   - modify dt-bindings (add atmel,clk- prefix to atmel specific properties)
>>   - add clk macros for dt-bindings
>>   - add pmc framework (helper function to access pmc registers)
>>   - add interrupt support to enable passive wait in clk_prepare functions
>>
>> Changes since v1:
>>   - fix bugs in pll, programmable and system clock implementations
>>     (wrong bit position).
>>   - add usb clock configuration support (ohci and udc drivers +
>>     clk_lookup for non dt boards)
>>   - rework of the system clock interfaces (no need to define a parent clock,
>>     system clock is a gate with no rate info)
>>   - change system, peripheral and programmable clk dt bindings (1 master node
>>     and multiple child nodes each defining a system/peripheral or prog clock)
>>   - fix bugs in sama5 dt definition
>>
>> Boris BREZILLON (16):
>>    ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h
>>    ARM: at91: add Kconfig options for common clk support
>>    clk: at91: add PMC base support
>>    clk: at91: add PMC macro file for dt definitions
>>    clk: at91: add PMC main clock
>>    clk: at91: add PMC pll clocks
>>    clk: at91: add PMC master clock
>>    clk: at91: add PMC system clocks
>>    clk: at91: add PMC peripheral clocks
>>    clk: at91: add PMC programmable clocks
>>    clk: at91: add PMC utmi clock
>>    clk: at91: add PMC usb clock
>>    clk: at91: add PMC smd clock
>>    dt: binding: add at91 clks dt bindings documentation
>>    ARM: at91: move pit timer to common clk framework
>>    ARM: at91: add new compatible strings for pmc driver
>>
>>   .../devicetree/bindings/clock/at91-clock.txt       |  339 +++++++++++++
>>   arch/arm/mach-at91/Kconfig                         |   44 ++
>>   arch/arm/mach-at91/Kconfig.non_dt                  |    6 +
>>   arch/arm/mach-at91/Makefile                        |    2 +-
>>   arch/arm/mach-at91/at91rm9200.c                    |    2 +-
>>   arch/arm/mach-at91/at91sam9260.c                   |    2 +-
>>   arch/arm/mach-at91/at91sam9261.c                   |    2 +-
>>   arch/arm/mach-at91/at91sam9263.c                   |    2 +-
>>   arch/arm/mach-at91/at91sam926x_time.c              |   14 +-
>>   arch/arm/mach-at91/at91sam9g45.c                   |    2 +-
>>   arch/arm/mach-at91/at91sam9n12.c                   |    2 +-
>>   arch/arm/mach-at91/at91sam9rl.c                    |    2 +-
>>   arch/arm/mach-at91/at91sam9x5.c                    |    2 +-
>>   arch/arm/mach-at91/clock.c                         |    7 +-
>>   arch/arm/mach-at91/generic.h                       |    3 +-
>>   arch/arm/mach-at91/pm.c                            |    2 +-
>>   arch/arm/mach-at91/pm_slowclock.S                  |    2 +-
>>   arch/arm/mach-at91/sama5d3.c                       |    2 +-
>>   arch/arm/mach-at91/setup.c                         |    8 +-
>>   drivers/clk/Makefile                               |    1 +
>>   drivers/clk/at91/Makefile                          |   12 +
>>   drivers/clk/at91/clk-main.c                        |  187 +++++++
>>   drivers/clk/at91/clk-master.c                      |  270 ++++++++++
>>   drivers/clk/at91/clk-peripheral.c                  |  410 +++++++++++++++
>>   drivers/clk/at91/clk-pll.c                         |  531 ++++++++++++++++++++
>>   drivers/clk/at91/clk-plldiv.c                      |  135 +++++
>>   drivers/clk/at91/clk-programmable.c                |  366 ++++++++++++++
>>   drivers/clk/at91/clk-smd.c                         |  171 +++++++
>>   drivers/clk/at91/clk-system.c                      |  135 +++++
>>   drivers/clk/at91/clk-usb.c                         |  398 +++++++++++++++
>>   drivers/clk/at91/clk-utmi.c                        |  159 ++++++
>>   drivers/clk/at91/pmc.c                             |  397 +++++++++++++++
>>   drivers/clk/at91/pmc.h                             |  116 +++++
>>   drivers/usb/gadget/atmel_usba_udc.c                |    2 +-
>>   include/dt-bindings/clk/at91.h                     |   22 +
>>   .../include/mach => include/linux/clk}/at91_pmc.h  |    4 +-
>>   36 files changed, 3741 insertions(+), 20 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/at91-clock.txt
>>   create mode 100644 drivers/clk/at91/Makefile
>>   create mode 100644 drivers/clk/at91/clk-main.c
>>   create mode 100644 drivers/clk/at91/clk-master.c
>>   create mode 100644 drivers/clk/at91/clk-peripheral.c
>>   create mode 100644 drivers/clk/at91/clk-pll.c
>>   create mode 100644 drivers/clk/at91/clk-plldiv.c
>>   create mode 100644 drivers/clk/at91/clk-programmable.c
>>   create mode 100644 drivers/clk/at91/clk-smd.c
>>   create mode 100644 drivers/clk/at91/clk-system.c
>>   create mode 100644 drivers/clk/at91/clk-usb.c
>>   create mode 100644 drivers/clk/at91/clk-utmi.c
>>   create mode 100644 drivers/clk/at91/pmc.c
>>   create mode 100644 drivers/clk/at91/pmc.h
>>   create mode 100644 include/dt-bindings/clk/at91.h
>>   rename {arch/arm/mach-at91/include/mach => include/linux/clk}/at91_pmc.h (98%)
>>
>> -- 
>> 1.7.9.5




More information about the linux-arm-kernel mailing list