[PATCH 08/11] misc: support for parallel slots in LP-8x4x
Sergei Ianovich
ynvich at gmail.com
Sun Dec 1 01:26:21 EST 2013
This patch enumerates parallel modules in expansion slots and exposes
model numbers via sysfs.
Signed-off-by: Sergei Ianovich <ynvich at gmail.com>
---
Documentation/misc-devices/lp8x4x_bus.txt | 8 ++
arch/arm/mach-pxa/include/mach/lp8x4x.h | 8 ++
arch/arm/mach-pxa/lp8x4x.c | 42 +++++++++-
drivers/misc/lp8x4x_bus.c | 127 ++++++++++++++++++++++++++++++
4 files changed, 184 insertions(+), 1 deletion(-)
diff --git a/Documentation/misc-devices/lp8x4x_bus.txt b/Documentation/misc-devices/lp8x4x_bus.txt
index d9a069d..9285fdc 100644
--- a/Documentation/misc-devices/lp8x4x_bus.txt
+++ b/Documentation/misc-devices/lp8x4x_bus.txt
@@ -28,6 +28,9 @@ into the device, they could be accessed using the 2nd PXA built-in UART port
(/dev/ttySA1). However, it seems that addresses are not processed by
the modules. So the parallel bus needs to select which slot is connected.
+Parallel modules allow much faster communication. There are accessed using
+IO memory through the FPGA. Their ports are exposed via sysfs.
+
SYSFS
-----
@@ -41,3 +44,8 @@ active_slot
is a parallel module in the selected slot, it simply ignores
incoming packets. So it is safe to activate any available
slot.
+
+/sys/bus/icpdas/devices/slot%02i:
+
+model
+ RO - shows expansion module model number
diff --git a/arch/arm/mach-pxa/include/mach/lp8x4x.h b/arch/arm/mach-pxa/include/mach/lp8x4x.h
index 9addfa8..e1005c5 100644
--- a/arch/arm/mach-pxa/include/mach/lp8x4x.h
+++ b/arch/arm/mach-pxa/include/mach/lp8x4x.h
@@ -37,6 +37,14 @@
/* board level registers in the FPGA */
+#define LP8X4X_SLOT1_IO 0x17001000
+#define LP8X4X_SLOT2_IO 0x17002000
+#define LP8X4X_SLOT3_IO 0x17003000
+#define LP8X4X_SLOT4_IO 0x17004000
+#define LP8X4X_SLOT5_IO 0x17005000
+#define LP8X4X_SLOT6_IO 0x17006000
+#define LP8X4X_SLOT7_IO 0x17007000
+#define LP8X4X_SLOT8_IO 0x17008000
#define LP8X4X_SLOT_SWITCH 0x17009004
#define LP8X4X_EOI LP8X4X_P2V(0x17009006)
#define LP8X4X_INSINT LP8X4X_P2V(0x17009008)
diff --git a/arch/arm/mach-pxa/lp8x4x.c b/arch/arm/mach-pxa/lp8x4x.c
index b30343d..ae84d36 100644
--- a/arch/arm/mach-pxa/lp8x4x.c
+++ b/arch/arm/mach-pxa/lp8x4x.c
@@ -429,6 +429,46 @@ static struct resource lp8x4x_bus_resources[] = {
.end = LP8X4X_SLOT_SWITCH,
.flags = IORESOURCE_MEM,
},
+ [2] = {
+ .start = LP8X4X_SLOT1_IO,
+ .end = LP8X4X_SLOT1_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = LP8X4X_SLOT2_IO,
+ .end = LP8X4X_SLOT2_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [4] = {
+ .start = LP8X4X_SLOT3_IO,
+ .end = LP8X4X_SLOT3_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [5] = {
+ .start = LP8X4X_SLOT4_IO,
+ .end = LP8X4X_SLOT4_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [6] = {
+ .start = LP8X4X_SLOT5_IO,
+ .end = LP8X4X_SLOT5_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [7] = {
+ .start = LP8X4X_SLOT6_IO,
+ .end = LP8X4X_SLOT6_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [8] = {
+ .start = LP8X4X_SLOT7_IO,
+ .end = LP8X4X_SLOT7_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
+ [9] = {
+ .start = LP8X4X_SLOT8_IO,
+ .end = LP8X4X_SLOT8_IO + 15,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device lp8x4x_bus_device[] = {
@@ -436,7 +476,7 @@ static struct platform_device lp8x4x_bus_device[] = {
.name = "lp8x4x-bus",
.id = 0,
.resource = &lp8x4x_bus_resources[0],
- .num_resources = 2,
+ .num_resources = 10,
},
};
diff --git a/drivers/misc/lp8x4x_bus.c b/drivers/misc/lp8x4x_bus.c
index 647fde7..b2d4a04 100644
--- a/drivers/misc/lp8x4x_bus.c
+++ b/drivers/misc/lp8x4x_bus.c
@@ -24,14 +24,57 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sergei Ianovich <ynvich at gmail.com>");
MODULE_DESCRIPTION("ICP DAS LP-8x4x parallel bus driver");
+struct lp8x4x_slot {
+ void *data_addr;
+ unsigned int model;
+ struct device dev;
+};
+
+#define LP8X4X_MAX_SLOT_COUNT 8
struct lp8x4x_master {
unsigned int slot_count;
void *count_addr;
unsigned int active_slot;
void *switch_addr;
+ struct lp8x4x_slot slot[LP8X4X_MAX_SLOT_COUNT];
struct device dev;
};
+static unsigned char lp8x4x_model[256] = {
+ 0, 0, 0, 0x11, 0, 0x18, 0x13, 0x11,
+ 0x0e, 0x11, 0, 0, 0, 0x5a, 0x5b, 0x5c,
+ 0x3c, 0x44, 0x34, 0x3a, 0x39, 0x36, 0x37, 0x33,
+ 0x35, 0x40, 0x41, 0x42, 0x38, 0x3f, 0x32, 0x45,
+ 0xac, 0x70, 0x8e, 0x8e, 0x1e, 0x72, 0x90, 0x29,
+ 0x4a, 0x22, 0xd3, 0xd2, 0x28, 0x25, 0x2a, 0x29,
+ 0x48, 0x49, 0x5d, 0x1f, 0x20, 0x23, 0x24, 0x4d,
+ 0x3d, 0x3e, 0, 0, 0, 0, 0, 0,
+ 0, 0x78, 0x72, 0x2b, 0x5e, 0x5e, 0x36, 0xae,
+ 0x30, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0x5c, 0x5e, 0, 0x5e, 0, 0,
+ 0, 0x3b, 0, 0, 0, 0, 0, 0,
+ 0, 0x50, 0x2e, 0, 0x58, 0, 0, 0x43,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0x54, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
static int lp8x4x_match(struct device *dev, struct device_driver *drv)
{
return 1;
@@ -42,6 +85,26 @@ static struct bus_type lp8x4x_bus_type = {
.match = lp8x4x_match,
};
+static void lp8x4x_slot_release(struct device *dev)
+{
+}
+
+static ssize_t model_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lp8x4x_slot *s = container_of(dev, struct lp8x4x_slot, dev);
+
+ return sprintf(buf, "%u\n", s->model + 8000);
+}
+
+static DEVICE_ATTR_RO(model);
+
+static struct attribute *slot_dev_attrs[] = {
+ &dev_attr_model.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(slot_dev);
+
static void lp8x4x_master_release(struct device *dev)
{
struct lp8x4x_master *m = container_of(dev, struct lp8x4x_master, dev);
@@ -107,10 +170,18 @@ ATTRIBUTE_GROUPS(master_dev);
static void devm_lp8x4x_bus_release(struct device *dev, void *res)
{
struct lp8x4x_master *m = *(struct lp8x4x_master **)res;
+ struct lp8x4x_slot *s;
void *mem = m->count_addr;
void *mem2 = m->switch_addr;
+ int i;
dev_info(dev, "releasing devices\n");
+ for (i = 0; i < LP8X4X_MAX_SLOT_COUNT; i++) {
+ s = &m->slot[i];
+ if (s->model)
+ device_unregister(&s->dev);
+ iounmap(s->data_addr);
+ }
device_unregister(&m->dev);
bus_unregister(&lp8x4x_bus_type);
@@ -120,11 +191,36 @@ static void devm_lp8x4x_bus_release(struct device *dev, void *res)
iounmap(mem);
}
+static void __init lp8x4x_bus_probe_slot(struct lp8x4x_master *m, int i,
+ unsigned char model)
+{
+ struct lp8x4x_slot *s = &m->slot[i];
+ int err;
+
+ dev_info(&m->dev, "found %u in slot %i\n", 8000 + model, i + 1);
+
+ s->dev.bus = &lp8x4x_bus_type;
+ dev_set_name(&s->dev, "slot%02i", i + 1);
+ s->dev.parent = &m->dev;
+ s->dev.release = lp8x4x_slot_release;
+ s->dev.groups = slot_dev_groups;
+ s->model = model;
+
+ err = device_register(&s->dev);
+ if (err < 0) {
+ dev_err(&s->dev, "failed to register device\n");
+ s->model = 0;
+ return;
+ }
+}
+
static int __init lp8x4x_bus_probe(struct platform_device *pdev)
{
struct lp8x4x_master *m, **p;
struct resource *res;
+ int i;
int err = 0;
+ unsigned int model;
m = kzalloc(sizeof(*m), GFP_KERNEL);
if (!m)
@@ -167,6 +263,30 @@ static int __init lp8x4x_bus_probe(struct platform_device *pdev)
goto err3;
}
+ for (i = 0; i < LP8X4X_MAX_SLOT_COUNT; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i + 2);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get slot %i address\n",
+ i);
+ err = -ENODEV;
+ goto err4;
+ }
+
+ m->slot[i].data_addr = ioremap(res->start, resource_size(res));
+ if (!m->slot[i].data_addr) {
+ dev_err(&pdev->dev, "Failed to ioremap %p\n",
+ m->slot[i].data_addr);
+ err = -EFAULT;
+ goto err4;
+ }
+ continue;
+err4:
+ for (i--; i >= 0; i--)
+ iounmap(m->slot[i].data_addr);
+
+ goto err3;
+ }
+
m->slot_count = ioread8(m->count_addr);
switch (m->slot_count) {
case 1:
@@ -205,6 +325,13 @@ static int __init lp8x4x_bus_probe(struct platform_device *pdev)
}
devres_add(&pdev->dev, p);
+ for (i = 0; i < LP8X4X_MAX_SLOT_COUNT; i++) {
+ model = lp8x4x_model[ioread8(m->slot[i].data_addr)];
+ if (!model)
+ continue;
+
+ lp8x4x_bus_probe_slot(m, i, model);
+ }
return 0;
err_dev:
--
1.8.4.2
More information about the linux-arm-kernel
mailing list