[PATCH 3/8] regmap: Add support for using regmap over ssbi

[Stephen Boyd]

On 12/13, Mark Brown wrote:
> On Thu, Dec 12, 2013 at 03:13:01PM -0800, Stephen Boyd wrote:
> 
> > > bulk_read() should decay to individual reads if there isn't a block
> > > operaton and it's not like the hardware actually supports bulk reads
> > > anyway.
> 
> > So regmap_bulk_read() should work if I don't have a map->bus? To make it
> > work with reg_read/write I had to do this. I'm not sure how to make
> > bulk_write work.

I came up with this (possibly ugly) patch. It works for my
specific case but I'm not sure if unpacking the val bits into an
unsigned int and passing that to _regmap_write() is sane. What do
you think?

---8<----
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 1ccd61b..333c059 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1514,11 +1514,9 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 {
 	int ret = 0, i;
 	size_t val_bytes = map->format.val_bytes;
-	void *wval;
+	void *wval = NULL;
 
-	if (!map->bus)
-		return -EINVAL;
-	if (!map->format.parse_inplace)
+	if (map->bus && !map->format.parse_inplace)
 		return -EINVAL;
 	if (reg % map->reg_stride)
 		return -EINVAL;
@@ -1528,7 +1526,7 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 	/* No formatting is require if val_byte is 1 */
 	if (val_bytes == 1) {
 		wval = (void *)val;
-	} else {
+	} else if (map->bus) {
 		wval = kmemdup(val, val_count * val_bytes, GFP_KERNEL);
 		if (!wval) {
 			ret = -ENOMEM;
@@ -1538,24 +1536,37 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 		for (i = 0; i < val_count * val_bytes; i += val_bytes)
 			map->format.parse_inplace(wval + i);
 	}
-	/*
-	 * Some devices does not support bulk write, for
-	 * them we have a series of single write operations.
-	 */
-	if (map->use_single_rw) {
-		for (i = 0; i < val_count; i++) {
-			ret = _regmap_raw_write(map,
+
+	if (map->bus) {
+		/*
+		 * Some devices does not support bulk write, for
+		 * them we have a series of single write operations.
+		 */
+		if (map->use_single_rw) {
+			for (i = 0; i < val_count; i++) {
+				ret = _regmap_raw_write(map,
 						reg + (i * map->reg_stride),
 						val + (i * val_bytes),
 						val_bytes);
-			if (ret != 0)
-				return ret;
+				if (ret != 0)
+					return ret;
+			}
+		} else {
+			ret = _regmap_raw_write(map, reg, wval,
+						val_bytes * val_count);
 		}
 	} else {
-		ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count);
+		for (i = 0; i < val_count; i++) {
+			unsigned int ival;
+			ival = *(unsigned int *)(val + (i * val_bytes));
+			ret = _regmap_write(map, reg + (i * map->reg_stride),
+					ival);
+			if (ret != 0)
+				goto out;
+		}
 	}
 
-	if (val_bytes != 1)
+	if (val_bytes != 1 && map->bus)
 		kfree(wval);
 
 out:

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation