[PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53

Shawn Guo shawn.guo at linaro.org
Tue Dec 3 06:46:51 EST 2013


On Tue, Dec 03, 2013 at 11:54:35AM +0100, Marc Kleine-Budde wrote:
> Hello Shawn,
> 
> On 11/26/2013 03:33 PM, Shawn Guo wrote:
> > On Tue, Nov 26, 2013 at 09:26:40AM +0100, Marc Kleine-Budde wrote:
> >> The problem is, that the wrong clock is being used. An all i.mx, but not
> >> on imx6, both clocks are the same, the bug doesn't show up. So before we
> >> can use the 24 MHz clock on mx53, we have to fix the driver.
> > 
> > So it sounds like a more appropriate merging path would be that,
> > you send the driver fix right away to mainline via net tree with
> > v3.13-rc series, and I rebase IMX tree on the -rc that has the fix,
> > and then apply the DTS patch.
> 
> The patch is now in Linus master:
> 1a3e517 can: flexcan: use correct clock as base for bit rate calculation

Great.

> 
> So it should be in the v3.13-rc3.

Ok, I will rebase my branch on v3.13-rc3 once it comes out.  But please
ping me again if I forget to.  Thanks.

Shawn




More information about the linux-arm-kernel mailing list