[PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes

[Laurent Pinchart]

Hi Magnus,

Thank you for the patch.

On Tuesday 17 December 2013 14:02:42 Magnus Damm wrote:
> From: Magnus Damm <damm at opensource.se>
> 
> Add support for r7s72100 PFC and GPIO device nodes port0 -> port11
> and jtagport0.
> 
> Signed-off-by: Magnus Damm <damm at opensource.se>
> ---
> 
>  arch/arm/boot/dts/r7s72100.dtsi |  154 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 154 insertions(+)
> 
> --- 0001/arch/arm/boot/dts/r7s72100.dtsi
> +++ work/arch/arm/boot/dts/r7s72100.dtsi	2013-11-27 16:06:36.000000000 
+0900
> @@ -14,6 +14,22 @@
>  	#address-cells = <1>;
>  	#size-cells = <1>;
> 
> +	aliases {
> +		gpio0 = &port0;
> +		gpio1 = &port1;
> +		gpio2 = &port2;
> +		gpio3 = &port3;
> +		gpio4 = &port4;
> +		gpio5 = &port5;
> +		gpio6 = &port6;
> +		gpio7 = &port7;
> +		gpio8 = &port8;
> +		gpio9 = &port9;
> +		gpio10 = &port10;
> +		gpio11 = &port11;
> +		gpio12 = &jtagport0;
> +	};
> +
>  	cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> @@ -33,4 +49,142 @@
>  		reg = <0xe8201000 0x1000>,
>  			<0xe8202000 0x1000>;
>  	};
> +
> +	pfc: pfc at fcfe3300 {
> +		compatible = "renesas,pfc-r7s72100";
> +		reg = <0xfcfe3300 0x400>, /* PM, PMC, PFC, PFCE */
> +		  	  <0xfcfe3a00 0x100>, /* PFCAE */
> +			  <0xfcfe7000 0x300>, /* PIBC, PBDC, PIPC */
> +			  <0xfcfe7b40 0x04>, /* JPMC */
> +			  <0xfcfe7b90 0x04>, /* JPMCSR */
> +			  <0xfcfe7f00 0x04>; /* JPIBC */
> +	};
> +
> +	port0: gpio at fcfe3100 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3100 0x4>, /* PSR */
> +		  	  <0xfcfe3200 0x2>, /* PPR */
> +			  <0xfcfe3800 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 0 6>;
> +	};
> +
> +	port1: gpio at fcfe3104 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3104 0x4>, /* PSR */
> +		  	  <0xfcfe3204 0x2>, /* PPR */
> +			  <0xfcfe3804 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 16 16>;

As P0 has 6 pins only this should ideally be 

		gpio-ranges = <&pfc 0 6 16>;

Otherwise the PFC driver will expose pins that don't exist. However, that 
would require computing the pin numbers in the PFC driver differently, as we 
currently just use the bank * 16 + index formula. Given that we only have 
three ports with less than 16 pins we could come up with a not overly complex 
formula that can be evaluated at compile time. Something like this should do.

#define RZ_PORT_PIN(bank, pin) \
	(bank) < 1 ? (pin) : \
	(bank) < 6 ? 6 + (((bank) - 1) * 16) + (pin)) : \
	(bank) < 10 ? 6 + 11 + 4 * 16 + (((bank) - 6) * 16) + (pin)) : \
	6 + 11 + 8 + 7 * 16 + (((bank) - 10) * 16) + (pin))

> +	};
> +
> +	port2: gpio at fcfe3108 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3108 0x4>, /* PSR */
> +		  	  <0xfcfe3208 0x2>, /* PPR */
> +			  <0xfcfe3808 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 32 16>;
> +	};
> +
> +	port3: gpio at fcfe310c {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe310c 0x4>, /* PSR */
> +		  	  <0xfcfe320c 0x2>, /* PPR */
> +			  <0xfcfe380c 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 48 16>;
> +	};
> +
> +	port4: gpio at fcfe3110 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3110 0x4>, /* PSR */
> +		  	  <0xfcfe3210 0x2>, /* PPR */
> +			  <0xfcfe3810 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 64 16>;
> +	};
> +
> +	port5: gpio at fcfe3114 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3114 0x4>, /* PSR */
> +		  	  <0xfcfe3214 0x2>, /* PPR */
> +			  <0xfcfe3814 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 80 11>;
> +	};
> +
> +	port6: gpio at fcfe3118 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3118 0x4>, /* PSR */
> +		  	  <0xfcfe3218 0x2>, /* PPR */
> +			  <0xfcfe3818 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 96 16>;
> +	};
> +
> +	port7: gpio at fcfe311c {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe311c 0x4>, /* PSR */
> +		  	  <0xfcfe321c 0x2>, /* PPR */
> +			  <0xfcfe381c 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 112 16>;
> +	};
> +
> +	port8: gpio at fcfe3120 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3120 0x4>, /* PSR */
> +		  	  <0xfcfe3220 0x2>, /* PPR */
> +			  <0xfcfe3820 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 128 16>;
> +	};
> +
> +	port9: gpio at fcfe3124 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3124 0x4>, /* PSR */
> +		  	  <0xfcfe3224 0x2>, /* PPR */
> +			  <0xfcfe3824 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 144 8>;
> +	};
> +
> +	port10: gpio at fcfe3128 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe3128 0x4>, /* PSR */
> +		  	  <0xfcfe3228 0x2>, /* PPR */
> +			  <0xfcfe3828 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 160 16>;
> +	};
> +
> +	port11: gpio at fcfe312c {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe312c 0x4>, /* PSR */
> +		  	  <0xfcfe322c 0x2>, /* PPR */
> +			  <0xfcfe382c 0x4>; /* PMSR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 176 16>;
> +	};
> +
> +	jtagport0: gpio at fcfe7b20 {
> +		compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
> +		reg = <0xfcfe7b20 0x2>; /* JPPR */
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		gpio-ranges = <&pfc 0 192 2>;
> +	};
>  };
-- 
Regards,

Laurent Pinchart