[PATCH v2] ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile

[Simon Horman]

On Thu, Nov 28, 2013 at 05:27:29PM +0100, Laurent Pinchart wrote:
> Only the SH-Mobile product name is mentioned in the Kconfig descriptions
> and help texts. This makes it difficult for external engineers working
> on other Renesas platforms to find upstream platform support as the
> combination of the SH-Mobile name and using the product number proved an
> effective method of concealment.
> 
> Replace the "SH-Mobile" name with "Renesas ARM SoCs" in all the related
> descriptions, help texts and comments.
> 
> Reported-by: Phil Edworthy <phil.edworthy at renesas.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

Thanks, I will queue this up.

> ---
>  arch/arm/Kconfig               |  7 ++++---
>  arch/arm/mach-shmobile/Kconfig | 18 +++++++++---------
>  2 files changed, 13 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 483d316..341b67d 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -645,7 +645,7 @@ config ARCH_MSM
>  	  (clock and power control, etc).
>  
>  config ARCH_SHMOBILE_LEGACY
> -	bool "Renesas SH-Mobile / R-Mobile (non-multiplatform)"
> +	bool "Renesas ARM SoCs (non-multiplatform)"
>  	select ARCH_SHMOBILE
>  	select ARM_PATCH_PHYS_VIRT
>  	select CLKDEV_LOOKUP
> @@ -661,8 +661,9 @@ config ARCH_SHMOBILE_LEGACY
>  	select PM_GENERIC_DOMAINS if PM
>  	select SPARSE_IRQ
>  	help
> -	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms using
> -	  a non-multiplatform kernel.
> +	  Support for Renesas ARM SoC platforms using a non-multiplatform
> +	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
> +	  and RZ families.
>  
>  config ARCH_RPC
>  	bool "RiscPC"
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index bc8108b..039b5e0 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -2,7 +2,7 @@ config ARCH_SHMOBILE
>  	bool
>  
>  config ARCH_SHMOBILE_MULTI
> -	bool "SH-Mobile Series" if ARCH_MULTI_V7
> +	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
>  	depends on MMU
>  	select ARCH_SHMOBILE
>  	select CPU_V7
> @@ -19,7 +19,7 @@ config ARCH_SHMOBILE_MULTI
>  
>  if ARCH_SHMOBILE_MULTI
>  
> -comment "SH-Mobile System Type"
> +comment "Renesas ARM SoCs System Type"
>  
>  config ARCH_EMEV2
>  	bool "Emma Mobile EV2"
> @@ -31,7 +31,7 @@ config ARCH_R8A7791
>  	bool "R-Car M2 (R8A77910)"
>  	select RENESAS_IRQC
>  
> -comment "SH-Mobile Board Type"
> +comment "Renesas ARM SoCs Board Type"
>  
>  config MACH_GENMAI
>  	bool "Genmai board"
> @@ -46,12 +46,12 @@ config MACH_KZM9D
>  	depends on ARCH_EMEV2
>  	select REGULATOR_FIXED_VOLTAGE if REGULATOR
>  
> -comment "SH-Mobile System Configuration"
> +comment "Renesas ARM SoCs System Configuration"
>  endif
>  
>  if ARCH_SHMOBILE_LEGACY
>  
> -comment "SH-Mobile System Type"
> +comment "Renesas ARM SoCs System Type"
>  
>  config ARCH_SH7372
>  	bool "SH-Mobile AP4 (SH7372)"
> @@ -136,7 +136,7 @@ config ARCH_R7S72100
>  	select CPU_V7
>  	select SH_CLK_CPG
>  
> -comment "SH-Mobile Board Type"
> +comment "Renesas ARM SoCs Board Type"
>  
>  config MACH_APE6EVM
>  	bool "APE6EVM board"
> @@ -300,7 +300,7 @@ config MACH_KZM9G_REFERENCE
>  
>  	   This is intended to aid developers
>  
> -comment "SH-Mobile System Configuration"
> +comment "Renesas ARM SoCs System Configuration"
>  
>  config CPU_HAS_INTEVT
>          bool
> @@ -325,8 +325,8 @@ config SHMOBILE_TIMER_HZ
>  	  Allows the configuration of the timer frequency. It is customary
>  	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
>  	  case of low timer frequencies other values may be more suitable.
> -	  SH-Mobile systems using a 32768 Hz RCLK for clock events may want
> -	  to select a HZ value such as 128 that can evenly divide RCLK.
> +	  Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
> +	  want to select a HZ value such as 128 that can evenly divide RCLK.
>  	  A HZ value that does not divide evenly may cause timer drift.
>  
>  config SH_TIMER_CMT
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>