[PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT

[Laurent Pinchart]

Hi Simon,

On Thursday 05 December 2013 12:45:54 Simon Horman wrote:
> On Thu, Nov 28, 2013 at 04:44:53PM +0100, Laurent Pinchart wrote:
> > The mandatory regulator-type property is missing, add it.
> 
> Thanks, I will queue this up.

Mark has rightfully commented on patch 1/2 in this series that the regulator-
type property shouldn't be mandatory but should default to voltage. We could 
then drop this patch.

> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > 
> >  arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
> > b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index
> > 7b80f19..013a7cd 100644
> > --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
> > +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
> > @@ -53,6 +53,8 @@
> > 
> >  		regulator-name = "SDHI0 VccQ";
> >  		regulator-min-microvolt = <1800000>;
> >  		regulator-max-microvolt = <3300000>;
> > 
> > +		regulator-type = "voltage";
> > +
> > 
> >  		vin-supply = <&vcc_sdhi0>;
> >  		
> >  		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-- 
Regards,

Laurent Pinchart