[PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.
Andrew Lunn
andrew at lunn.ch
Wed Dec 4 09:17:19 EST 2013
Add a platform driver definition to instantiate the dove cpufreq
driver. Also indicate the ARCH has cpufreq support, so allowing the
cpufreq framework to be enabled.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Make resource names consistent.
Fix length of ranges
---
arch/arm/Kconfig | 1 +
arch/arm/mach-dove/board-dt.c | 3 +++
arch/arm/mach-dove/common.c | 36 ++++++++++++++++++++++++++++++++++
arch/arm/mach-dove/common.h | 1 +
arch/arm/mach-dove/include/mach/dove.h | 1 +
5 files changed, 42 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7eee953..908b02f8d901 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -500,6 +500,7 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_PJ4
select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index 49fa9abd09da..845e8b328432 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -27,6 +27,9 @@ static void __init dove_dt_init(void)
tauros2_init(0);
#endif
BUG_ON(mvebu_mbus_dt_init());
+
+ dove_cpufreq_init();
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index c122bcff9f7c..323fcd4b27b6 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -344,6 +344,42 @@ void __init dove_sdio1_init(void)
platform_device_register(&dove_sdio1);
}
+/*****************************************************************************
+ * CPU Frequency
+ ****************************************************************************/
+static struct resource dove_cpufreq_resources[] = {
+ [0] = {
+ .start = DOVE_PMU_PHYS_BASE,
+ .end = DOVE_PMU_PHYS_BASE + 0x7,
+ .flags = IORESOURCE_MEM,
+ .name = "cpufreq: DFS"
+ },
+ [1] = {
+ .start = DOVE_PMU_PHYS_BASE + 0x8000,
+ .end = DOVE_PMU_PHYS_BASE + 0x8003,
+ .flags = IORESOURCE_MEM,
+ .name = "cpufreq: PMU CR"
+ },
+ [2] = {
+ .start = DOVE_PMU_PHYS_BASE + 0x0044,
+ .end = DOVE_PMU_PHYS_BASE + 0x0047,
+ .flags = IORESOURCE_MEM,
+ .name = "cpufreq: PMU Clk Div"
+ },
+};
+
+static struct platform_device dove_cpufreq_device = {
+ .name = "dove-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dove_cpufreq_resources),
+ .resource = dove_cpufreq_resources,
+};
+
+void __init dove_cpufreq_init(void)
+{
+ platform_device_register(&dove_cpufreq_device);
+}
+
void __init dove_setup_cpu_wins(void)
{
/*
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 1d725224d146..5c9a77bdd442 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -44,6 +44,7 @@ void dove_spi1_init(void);
void dove_i2c_init(void);
void dove_sdio0_init(void);
void dove_sdio1_init(void);
+void dove_cpufreq_init(void);
void dove_restart(enum reboot_mode, const char *);
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index 0c4b35f4ee5b..48db186ae6bc 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -144,6 +144,7 @@
#define DOVE_SD0_GPIO_SEL (1 << 0)
/* Power Management */
+#define DOVE_PMU_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd0000)
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000)
#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c)
--
1.8.5
More information about the linux-arm-kernel
mailing list