March 2013 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Mar 1 00:33:39 EST 2013
Ending: Sun Mar 31 22:27:22 EDT 2013
Messages: 7186

• [PATCH 04/14] ARM: OMAP2+: Add function for configuring GPMC settings   Philip, Avinash
• [PATCH 06/14] ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()   Philip, Avinash
• [PATCH] arm64: add support for 8250/16550 earlyprintk   Anup Patel
• [GIT PULL 0/3] arm-soc: late changes for 3.9   Olof Johansson
• [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result   Felipe Balbi
• [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result   Felipe Balbi
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [PATCH v4 0/3] R-Car SATA platform data   Simon Horman
• [PATCH v2 2/3] crypto: sahara: Add driver for SAHARA2 accelerator.   Arnaud Patard (Rtp)
• [PATCH V3 1/4] ARM: tegra: pmc: convert PMC driver to support DT only   Joseph Lo
• [PATCH V3 2/4] ARM: tegra: pmc: add power on function for secondary CPUs   Joseph Lo
• [BUG][arm-soc] kernel panic in boot on Openblocks with the latest kernel   Heikki Krogerus
• [BUG][arm-soc] kernel panic in boot on Openblocks with the latest kernel   Gregory CLEMENT
• [PATCH] arm64: add support for 8250/16550 earlyprintk   Marc Zyngier
• [PATCH v2 1/1 net-next] fec: net: put tx to napi poll function to fix dead lock   Richard Zhao
• [PATCH] arm64: add support for 8250/16550 earlyprintk   Anup Patel
• [PATCH] arm: mvebu: Reduce reg-io-width with UARTs   Heikki Krogerus
• [PATCH 1/1] arm: remove extra semicolon in if statement   Uwe Kleine-König
• [PATCH v2 1/1 net-next] fec: net: put tx to napi poll function to fix dead lock   David Miller
• [PATCH V2] arm64: add support for 8250/16550 earlyprintk   Anup Patel
• [PATCH V2] arm64: add support for 8250/16550 earlyprintk   Marc Zyngier
• [PATCH 3/4] ARM: nomadik: add dynamic irq flag to the timer   Vincent Guittot
• [PATCH 1/1] arm: remove extra semicolon in if statement   Mark Rutland
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Bill Huang
• [PATCH 2/2] ARM: mach-shmobile: kzm9g: do not enable REGULATOR_DUMMY in defconfig   Simon Horman
• [PATCH 1/2] ARM: shmobile: kzm9g: correct smsc regulator registration   Simon Horman
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Peter De Schrijver
• [PATCH] arm: mvebu: Reduce reg-io-width with UARTs   Gregory CLEMENT
• [PATCH] arm: mvebu: Reduce reg-io-width with UARTs   Masami Hiramatsu
• [PATCH V2] arm64: add support for 8250/16550 earlyprintk   Catalin Marinas
• [PATCH 09/12] ASoC: dmaengine_pcm: support use of generic DMA helper   Mark Brown
• [PATCH v3 0/2] crypto: sahara: Add support for SAHARA in i.MX27.   Javier Martin
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   Javier Martin
• [PATCH v3 2/2] crypto: sahara: Add driver for SAHARA2 accelerator.   Javier Martin
• [PATCH 3/7] ARM: hs: add board support with device tree   Arnd Bergmann
• [PATCH v6 00/46] CPU hotplug: stop_machine()-free CPU hotplug   Vincent Guittot
• [PATCH 00/15] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Santosh Shilimkar
• [PATCH 01/15] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Santosh Shilimkar
• [PATCH 02/15] ARM: OMAP5: PM: Update CPU context register offset   Santosh Shilimkar
• [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Santosh Shilimkar
• [PATCH 04/15] ARM: OMAP5: PM: Set MPUSS-EMIF clock-domain static dependency   Santosh Shilimkar
• [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default   Santosh Shilimkar
• [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Santosh Shilimkar
• [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization   Santosh Shilimkar
• [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support   Santosh Shilimkar
• [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Santosh Shilimkar
• [PATCH 10/15] ARM: OMAP5: PM: Add MPU Open Switch Retention support   Santosh Shilimkar
• [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support   Santosh Shilimkar
• [PATCH 12/15] ARM: OMAP4+: CPUidle: Cleanup idle driver for OMAP5 support   Santosh Shilimkar
• [PATCH 13/15] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()   Santosh Shilimkar
• [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Santosh Shilimkar
• [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset   Santosh Shilimkar
• [PATCH v2] pinctrl: Declare operation structures as const   Linus Walleij
• [PATCH] ARM: mxs_defconfig: Select watchdog driver   Fabio Estevam
• [PATCH v9 01/10] gpio: add gpio offset in gpio range cells property   Linus Walleij
• [PATCH v9 02/10] gpio: fix wrong checking condition for gpio range   Linus Walleij
• [PATCH v9 03/10] gpio: pl061: support irqdomain   Linus Walleij
• [PATCH v9 04/10] pinctrl: check pinctrl ready for gpio range   Linus Walleij
• [PATCH v9 05/10] gpio: pl061: bind pinctrl by gpio request   Linus Walleij
• [PATCH v9 06/10] pinctrl: single: create new gpio function range   Linus Walleij
• [PATCH v9 07/10] pinctrl: generic: dump pin configuration   Linus Walleij
• [PATCH v9 08/10] pinctrl: single: set function mask as optional   Linus Walleij
• [PATCH v9 09/10] pinctrl: single: support generic pinconf   Linus Walleij
• [PATCH v9 10/10] document: devicetree: bind pinconf with pin single   Linus Walleij
• [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset   Nishanth Menon
• [PATCH 2/2] pinctrl: imx: use pin_func_ids to search the pinctrl item.   Linus Walleij
• [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset   Santosh Shilimkar
• [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset   Nishanth Menon
• [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset   Santosh Shilimkar
• [PATCH 3/4] ARM: nomadik: add dynamic irq flag to the timer   Rickard Andersson
• [PATCH 01/15] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Nishanth Menon
• [PATCH v3 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Nishanth Menon
• Starting the kernel on Core1 of a Cortex-A9 system   Till Crueger
• [PATCH] clk: add si5351 i2c common clock driver   Daniel Mack
• Starting the kernel on Core1 of a Cortex-A9 system   Russell King - ARM Linux
• [PATCH] video: imxfb DT support   Markus Pargmann
• [PATCH 1/2] imxfb: Set alpha value of the framebuffer   Markus Pargmann
• [PATCH 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH 04/14] ARM: OMAP2+: Add function for configuring GPMC settings   Jon Hunter
• [PATCH 06/14] ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH 2/2] video: imxfb: Add DT support   Fabio Estevam
• omap: IORESOURCE_IRQ flags not set when defining a GPIO-IRQ from DT   Javier Martinez Canillas
• [PATCH v4 0/2] Add automatic bus number support for i2c busses with device tree   Doug Anderson
• [PATCH v4 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present   Doug Anderson
• [PATCH v4 2/2] i2c: pxa: Use i2c-core to get bus number now   Doug Anderson
• [PATCH 0/2] gpio/omap: updates for v3.10   Jon Hunter
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Jon Hunter
• [PATCH 2/2] gpio/omap: warn if bank is not enabled on setting irq type   Jon Hunter
• omap: IORESOURCE_IRQ flags not set when defining a GPIO-IRQ from DT   Russell King - ARM Linux
• [PATCH 02/15] ARM: OMAP5: PM: Update CPU context register offset   Nishanth Menon
• Multi-platform, and secure-only ARM errata workarounds   Stephen Warren
• [PATCH 0/2] gpio/omap: updates for v3.10   Kevin Hilman
• [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Nishanth Menon
• [PATCH] lglock: add read-preference local-global rwlock   Lai Jiangshan
• [PATCH 0/3] Add OF support to CMT driver - bindings discussion   Bastian Hecht
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Bastian Hecht
• [PATCH 2/3] ARM: mach-shmobile: sh73a0: Add CMT DT name to clock list   Bastian Hecht
• [PATCH 3/3] ARM: mach-shmobile: sh73a0: Setup the timer device CMT10 using DT   Bastian Hecht
• [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks   Lai Jiangshan
• [PATCH] lglock: add read-preference local-global rwlock   Tejun Heo
• Multi-platform, and secure-only ARM errata workarounds   Russell King - ARM Linux
• [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks   Tejun Heo
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Mike Turquette
• [PATCH] pinctrl: gpio: vt8500: Add pin control driver for Wondermedia SoCs   Stephen Warren
• [PATCH 1/2] ARM: Tegra: Add clock entry for smp_twd clock   Stephen Warren
• [PATCH] lglock: add read-preference local-global rwlock   Oleg Nesterov
• [PATCH 1/2] ARM: Tegra: Add clock entry for smp_twd clock   Stephen Warren
• [PATCH 2/2] clk: Tegra: Remove duplicate smp_twd clock   Stephen Warren
• [PATCH RFC] arm: l2x0: Leverage power saving features   Soren Brinkmann
• [PATCH 3/3] ARM: mach-shmobile: sh73a0: Setup the timer device CMT10 using DT   Sergei Shtylyov
• [PATCH v4 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present   Wolfram Sang
• [PATCH V3 2/4] ARM: tegra: pmc: add power on function for secondary CPUs   Stephen Warren
• [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default   Nishanth Menon
• [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Nishanth Menon
• [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks   Srivatsa S. Bhat
• [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks   Srivatsa S. Bhat
• [PATCH v4 2/8] reset: Add reset controller API   Stephen Warren
• [PATCH v4 3/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)   Stephen Warren
• [PATCH] lglock: add read-preference local-global rwlock   Srivatsa S. Bhat
• [PATCH v4 3/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)   Stephen Warren
• [PATCH 12/14] ARM: OMAP2+: Add additional GPMC timing parameters   Ezequiel Garcia
• [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization   Nishanth Menon
• [PATCH 12/14] ARM: OMAP2+: Add additional GPMC timing parameters   Ezequiel Garcia
• [PATCH v4 8/8] reset: Add driver for gpio-controlled reset pins   Stephen Warren
• [PATCH] arm/dts: Add basic support for gta04 (Openmoko next generation) board.   Belisko Marek
• [PATCH] ARM: Remove VFP debug spew   Doug Anderson
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Mike Turquette
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Stephen Warren
• [PATCH v2 1/1 net-next] fec: net: put tx to napi poll function to fix dead lock   David Miller
• [PATCH 1/2] ARM: Tegra: Add clock entry for smp_twd clock   Olof Johansson
• [PATCH/RFC v2 0/2] CPUFreq for kzm9g   Guennadi Liakhovetski
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Ezequiel Garcia
• [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support   Nishanth Menon
• [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Nishanth Menon
• [PATCH 10/15] ARM: OMAP5: PM: Add MPU Open Switch Retention support   Nishanth Menon
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH 12/14] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• [PATCH 12/14] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• omap: IORESOURCE_IRQ flags not set when defining a GPIO-IRQ from DT   Jon Hunter
• [PATCH 0/2] gpio/omap: updates for v3.10   Javier Martinez Canillas
• [GIT PULL] Device Tree fixes for v3.9   Linus Walleij
• [GIT PULL] Device Tree fixes for v3.9   Arnd Bergmann
• [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support   Nishanth Menon
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Aaro Koskinen
• [PATCH 12/15] ARM: OMAP4+: CPUidle: Cleanup idle driver for OMAP5 support   Nishanth Menon
• omap: IORESOURCE_IRQ flags not set when defining a GPIO-IRQ from DT   Russell King - ARM Linux
• [PATCH 13/15] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()   Nishanth Menon
• [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Nishanth Menon
• [GIT PULL] Device Tree fixes for v3.9   Lee Jones
• [PATCH] arm: dts: Add uart1 and uart2 to igep boards.   Javier Martinez Canillas
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Bill Huang
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Bill Huang
• [PATCH -next] spi: fix return value check in ce4100_spi_probe()   Mark Brown
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Santosh Shilimkar
• [PATCH 2/2] gpio/omap: warn if bank is not enabled on setting irq type   Santosh Shilimkar
• [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Santosh Shilimkar
• [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default   Santosh Shilimkar
• [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Santosh Shilimkar
• [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization   Santosh Shilimkar
• [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support   Santosh Shilimkar
• [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Santosh Shilimkar
• [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support   Santosh Shilimkar
• [PATCH 12/15] ARM: OMAP4+: CPUidle: Cleanup idle driver for OMAP5 support   Santosh Shilimkar
• [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Santosh Shilimkar
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Richard Zhao
• [PATCH 1/4] ARM: s3c24xx: Removed unneeded dependency on ARCH_S3C24XX for boards   Alexander Shiyan
• [PATCH 2/4] ARM: s3c24xx: Removed unneeded dependency on CPU_S3C2410   Alexander Shiyan
• [PATCH 3/4] ARM: s3c24xx: Removed unneeded dependency on CPU_S3C2412   Alexander Shiyan
• [PATCH 4/4] ARM: s3c24xx: Fix switching FIFO in arch_enable_uart_fifo function   Alexander Shiyan
• [PATCH V2 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Amit Daniel Kachhap
• [PATCH V2 2/4] cpufreq: exynos: Remove error return even if no soc is found   Amit Daniel Kachhap
• [PATCH V2 3/4] arm: exynos: Enable OPP library support for exynos5440   Amit Daniel Kachhap
• [PATCH V2 4/4] dts: Add cpufreq controller node for Exynos5440 SoC   Amit Daniel Kachhap
• [PATCH v5 01/12] gpio: pxa: identify ed mask reg with platform data   Grant Likely
• [PATCH 0/4][V2] time: dynamic irq affinity   Daniel Lezcano
• [PATCH 1/4][V2] time : pass broadcast parameter   Daniel Lezcano
• [PATCH 2/4][V2] time : set broadcast irq affinity   Daniel Lezcano
• [PATCH 3/4][V2] ARM: nomadik: add dynamic irq flag to the timer   Daniel Lezcano
• [PATCH 4/4][V2] ARM: timer-sp: Set dynamic irq affinity   Daniel Lezcano
• [PATCH 1/4] ARM: s3c24xx: Removed unneeded dependency on ARCH_S3C24XX for boards   Arnd Bergmann
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Felipe Balbi
• [PATCH 2/2] gpio/omap: warn if bank is not enabled on setting irq type   Felipe Balbi
• Re[2]: [PATCH 1/4] ARM: s3c24xx: Removed unneeded dependency on ARCH_S3C24XX for boards   Alexander Shiyan
• [PATCH] lglock: add read-preference local-global rwlock   Michel Lespinasse
• [PATCH] ARM: S5PV210: Fix PL330 DMA controller clkdev entries   Sylwester Nawrocki
• [PATCH V2] lglock: add read-preference local-global rwlock   Lai Jiangshan
• [PATCH] lglock: add read-preference local-global rwlock   Lai Jiangshan
• Question about fixed-clock   Daniel Mack
• [PATCH] ARM: S5PV210: Fix PL330 DMA controller clkdev entries   Lonsn
• [PATCH v4 0/2] dma: imx-dma: OFTree support   Markus Pargmann
• [PATCH v4 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [PATCH v4 2/2] DMA: imx-dma: imxdma->dev used uninitialized   Markus Pargmann
• [PATCH] lglock: add read-preference local-global rwlock   Oleg Nesterov
• [PATCH] lglock: add read-preference local-global rwlock   Oleg Nesterov
• [PATCH V2] lglock: add read-preference local-global rwlock   Srivatsa S. Bhat
• [PATCH V2] lglock: add read-preference local-global rwlock   Oleg Nesterov
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Grant Likely
• [PATCH 2/2] gpio/omap: warn if bank is not enabled on setting irq type   Grant Likely
• Stone mosaic and Glass mosaic and Metal mosaic Supply与您共享了相册。   Stone mosaic and Glass mosaic and Metal mosaic Supply
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Grant Likely
• [PATCH 3/3] ARM: S3C24XX: handle s3c2412 eints using new infrastructure   Grant Likely
• [PATCH v4 1/2] dma: imx-dma: Add oftree support   Arnd Bergmann
• [PATCH v2 3/4] spi: s3c64xx: add dma maxburst size initialization   Grant Likely
• [PATCH v2 3/4] spi: s3c64xx: add dma maxburst size initialization   Grant Likely
• [PATCH v2 3/4] spi: s3c64xx: add dma maxburst size initialization   Grant Likely
• [PATCH 1/4] spi/davinci: fix module build error   Grant Likely
• [PATCH 0/4] Enable SPI flash support on da850-evm DT kernel   Grant Likely
• [PATCH v5 01/16] spi/spi-atmel: fix master->num_chipselect wrongly set.   Grant Likely
• [PATCH 05/12] spi: mxs-spi: move to use generic DMA helper   Grant Likely
• [PATCH 00/40] Power: AB8500: Internal development push   Anton Vorontsov
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Heiko Stübner
• [PATCH 02/14] MAINTAINERS: remove arch/arm/plat-nomadik/   Cesar Eduardo Barros
• [PATCH 03/14] MAINTAINERS: remove arch/arm/plat-s3c24xx/   Cesar Eduardo Barros
• [PATCH v5 01/16] spi/spi-atmel: fix master->num_chipselect wrongly set.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5 02/16] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Mike Turquette
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Sylwester Nawrocki
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Tomasz Figa
• Fixing KVM/ARM breakage in mainline   Russell King - ARM Linux
• Fixing KVM/ARM breakage in mainline   Gleb Natapov
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Sylwester Nawrocki
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Heiko Stübner
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Heiko Stübner
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Sylwester Nawrocki
• [PATCH, RFC] default machine descriptor for multiplatform   Rob Herring
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Richard Zhao
• [PATCH] pinctrl: single: avoid to set read only object   Haojian Zhuang
• [PATCH] ARM: s3c24xx: Add special bus clock ratio mode support for S3C2410A   Alexander Shiyan
• [PATCH V2] lglock: add read-preference local-global rwlock   Oleg Nesterov
• drivers/dma/dw_dmac.c:1278:48: sparse: incorrect type in argument 1 (different base types)   Arnd Bergmann
• [PATCH] arm: mxs: Update mxs_defconfig   Marek Vasut
• [PATCH v5 01/12] gpio: pxa: identify ed mask reg with platform data   Haojian Zhuang
• [PATCH v5 00/12] enhance DT support on gpio pxa   Haojian Zhuang
• [PATCH] arm: mxs: Update mxs_defconfig   Shawn Guo
• [PATCH] mm: Fixup the condition whether the page cache is free   Li Haifeng
• [PATCH 2/2] pinctrl: imx: use pin_func_ids to search the pinctrl item.   Dong Aisheng
• [PATCH] pinctrl: core: add dependence of GPIOLIB   Haojian Zhuang
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Rob Herring
• [RFCv2 0/2] Representing interrupt affinity in devicetree   Grant Likely
• v3.9-rc1: [BUG: swapper/1 still has locks held!]   Shawn Guo
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   Frank Li
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Paul Mundt
• [PATCH RFC] arm: l2x0: Leverage power saving features   Will Deacon
• drivers/dma/dw_dmac.c:1278:48: sparse: incorrect type in argument 1 (different base types)   Viresh Kumar
• [PATCH] ARM: mm: clean-up in order to reduce to call kmap_high_get()   Joonsoo Kim
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   Joonsoo Kim
• drivers/dma/dw_dmac.c:1278:48: sparse: incorrect type in argument 1 (different base types)   Vinod Koul
• [PATCH] DMA: PL330: allow submitting 2 requests at a time   Vinod Koul
• [PATCH] DMA: PL330: Add check if device tree compatible   Padmavathi Venna
• [PATCH 1/2] ARM: exynos: pl330: Add #dma-cells for generic dma binding support   Padmavathi Venna
• [PATCH 2/2] Arm: socfpga: pl330: Add #dma-cells for generic dma binding support   Padmavathi Venna
• [PATCH 2/2] ARM: EXYNOS: support burst mode for for dev-to-mem and dev-to-mem transmit   Vinod Koul
• [PATCH] ARM: ux500: read the correct soc_id number   Linus Walleij
• [GIT PULL] imx fixes for 3.9   Shawn Guo
• [PATCH 1/2] pinctrl: imx6q: add DTE pinctrl items for mx6q uart   Shawn Guo
• Multi-platform, and secure-only ARM errata workarounds   Peter De Schrijver
• [PATCH v2 0/3] Get rid of big array from imx pinctrl driver   Shawn Guo
• [GIT PULL] mxs fixes for 3.9   Shawn Guo
• [PATCH 1/1] net: fec: fix build error in no MXC platform   Frank Li
• [PATCH RESEND 2/2] clocksource: dbx500-prcmu: comment cleanup   Linus Walleij
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Mike Turquette
• [PATCH] mfd: Fix AB8500 build failure if POWER_SUPPLY is not configured   Linus Walleij
• [PATCH 2/2] video: imxfb: Add DT support   Sascha Hauer
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   Sascha Hauer
• [PATCH v4 2/8] reset: Add reset controller API   Philipp Zabel
• [PATCH 1/9] ARM: dt: add header to define GPIO flags   Grant Likely
• [PATCH 09/12] ASoC: dmaengine_pcm: support use of generic DMA helper   Shawn Guo
• [PATCH 6/9] ARM: tegra: use pre-processor for all device trees   Grant Likely
• Multi-platform, and secure-only ARM errata workarounds   Peter De Schrijver
• Latest randconfig build errors   Russell King - ARM Linux
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Mark Rutland
• [PATCH 04/14] ARM: OMAP2+: Add function for configuring GPMC settings   Philip, Avinash
• [PATCH 00/40] Power: AB8500: Internal development push   Samuel Ortiz
• Debugging missing interrupts   lexa
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Florian Vaussard
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Thierry Reding
• [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control   Felipe Balbi
• [RFC PATCH 0/3] ARM: OMAP2+: Add command line parameter for debugSS module control   hvaibhav at ti.com
• [RFC PATCH 1/3] ARM: AM33XX: clock: Add debugSS clock nodes to clock tree   hvaibhav at ti.com
• [RFC PATCH 2/3] ARM: AM33XX: hwmod: Add hwmod data for debugSS   hvaibhav at ti.com
• [RFC PATCH 3/3] ARM: OMAP2+: Add command line parameter for debugSS module control   hvaibhav at ti.com
• [PATCH 00/10] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH 01/10] gpio: tegra: add gpio wakeup source handling   Joseph Lo
• [PATCH 02/10] ARM: tegra: irq: add wake up handling   Joseph Lo
• [PATCH 03/10] ARM: tegra: get power management configurations for PMC from DT   Joseph Lo
• [PATCH 04/10] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH 05/10] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH 06/10] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH 07/10] ARM: dts: tegra: add power gpio keys to DT   Joseph Lo
• [PATCH 08/10] ARM: dts: tegra: whistler: add wakeup source for KBC   Joseph Lo
• [PATCH 09/10] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH 10/10] ARM: tegra: config: defconfig update   Joseph Lo
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Ezequiel Garcia
• [PATCH] arm: mxs: Update mxs_defconfig   Marek Vasut
• [PATCH 03/14] MAINTAINERS: remove arch/arm/plat-s3c24xx/   Kukjin Kim
• [PATCH] DMA: PL330: Add check if device tree compatible   Arnd Bergmann
• [PATCH v2 0/4] Enable SPI flash support on da850-evm DT kernel   Manjunathappa, Prakash
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v2 2/4] ARM: davinci: da850: add SPI1 DT node   Manjunathappa, Prakash
• [PATCH v2 3/4] ARM: davinci: da850: override SPI DT node device name   Manjunathappa, Prakash
• [PATCH v2 4/4] ARM: davinci: da850-evm: add SPI flash support   Manjunathappa, Prakash
• [PATCH] ARM: S5PV210: Fix PL330 DMA controller clkdev entries   Kukjin Kim
• [PATCH 0/4] Enable SPI flash support on da850-evm DT kernel   Manjunathappa, Prakash
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration   Thomas Abraham
• [PATCH v2 4/4] ARM: davinci: da850-evm: add SPI flash support   Manjunathappa, Prakash
• [PATCH] ARM: S5PV210: Fix PL330 DMA controller clkdev entries   Sylwester Nawrocki
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration   Heiko Stübner
• [PATCH 0/9] rtc: stmp3xxx: DT bindings and wakealarm   Steffen Trumtrar
• [PATCH 1/9] MXS/i.MX28: add the possibility to define the used crystals via device tree   Steffen Trumtrar
• [PATCH 2/9] MXS/i.MX28: add the possibility to define the external RTC crystal   Steffen Trumtrar
• [PATCH 3/9] MXS/i.MX28: prepare different clocking of the built-in RTC   Steffen Trumtrar
• [PATCH 4/9] MXS/i.MX28: there is more than one way to clock the RTC   Steffen Trumtrar
• [PATCH 5/9] MXS/i.MX28: enable RTC to wakeup the system   Steffen Trumtrar
• [PATCH 6/9] rtc: stmp3xxx: add sysfs entries for persistent regs   Steffen Trumtrar
• [PATCH 7/9] rtc: stmp3xxx: Re-enable active alarm   Steffen Trumtrar
• [PATCH 8/9] rtc: stmp3xxx: Check copy controller state   Steffen Trumtrar
• [PATCH 9/9] rtc: stmp3xxx: Replace wait_time function   Steffen Trumtrar
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration   Thomas Abraham
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Felipe Balbi
• [V8 PATCH 02/16] usb: gadget: mv_udc: use PHY driver for udc   Felipe Balbi
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Gerlando Falauto
• [PATCH 0/5] at91: atmel_lcdfb: regression fixes and cpu_is removal   Johan Hovold
• [PATCH v2 0/3] clock driver for sunxi   Emilio López
• [PATCH] mm: Fixup the condition whether the page cache is free   Johannes Weiner
• [PATCH 6/9] rtc: stmp3xxx: add sysfs entries for persistent regs   Grant Likely
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Simon Guinot
• [PATCH 3/3] ARM: mach-shmobile: sh73a0: Setup the timer device CMT10 using DT   Bastian Hecht
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Bastian Hecht
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Arnd Bergmann
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7740: Add DT names to clock list   Bastian Hecht
• [PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Bastian Hecht
• [PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Arnd Bergmann
• OMAP baseline test results for v3.8   Paul Walmsley
• [PATCH 05/32] lib: devres: don't enclose pcim_*() functions in CONFIG_HAS_IOPORT   Thomas Petazzoni
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Arnd Bergmann
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Bastian Hecht
• [PATCH] arm: davinci: fix edma dmaengine induced null pointer dereference on da830   Matt Porter
• EDMA and kernel panic (null pointer) on da830   Matt Porter
• [PATCH v4 2/8] reset: Add reset controller API   Stephen Warren
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Jon Hunter
• Multi-platform, and secure-only ARM errata workarounds   Stephen Warren
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Felipe Balbi
• [PATCH 1/9] ARM: dt: add header to define GPIO flags   Stephen Warren
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Gerlando Falauto
• [PATCH 6/9] ARM: tegra: use pre-processor for all device trees   Stephen Warren
• [PATCH] ARM: OMAP2+: Fix broken gpmc support   Tony Lindgren
• [PATCH] ARM: OMAP2+: mux: correct wrong error messages   Tony Lindgren
• [PATCH 00/40] Power: AB8500: Internal development push   Anton Vorontsov
• LVDS (LDB) driver for i.MX53 IPU   Martin Fuzzey
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH] Core Standby Mode and caches   Bastian Hecht
• [PATCH] ARM: shmobile: r8a7740: Add CPU Core Standby Mode   Bastian Hecht
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Jon Hunter
• [PATCH] ARM: OMAP3: board-generic: Add missing omap3_init_late   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove duplicate omap4430_init_late() declaration   Tony Lindgren
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Nishanth Menon
• [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default   Nishanth Menon
• [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Nishanth Menon
• [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization   Nishanth Menon
• [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support   Nishanth Menon
• [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support   Nishanth Menon
• Latest randconfig build errors   Tony Lindgren
• [PATCH 1/2] gpio/omap: convert gpio irq domain to linear mapping   Felipe Balbi
• [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Nishanth Menon
• [GIT PULL] ARM: OMAP2+: standardize integration for AES & SHA/MD5 IP blocks for 3.9   Tony Lindgren
• Latest randconfig build errors   Felipe Balbi
• [PATCH v3 0/8] ARM: omap2: GPMC cleanup   Tony Lindgren
• Latest randconfig build errors   Tony Lindgren
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH] ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h   Tony Lindgren
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   David Miller
• [PATCH 1/1] net: fec: fix build error in no MXC platform   David Miller
• [PATCH 1/2] arm: omap2: mux: fix debugfs file permission   Tony Lindgren
• [PATCH v3 0/8] ARM: omap2: GPMC cleanup   Jon Hunter
• [PATCH] pinctrl: single: avoid to set read only object   Tony Lindgren
• [PATCH 1/2] arm: omap2: mux: fix debugfs file permission   Felipe Balbi
• [PATCH 05/32] lib: devres: don't enclose pcim_*() functions in CONFIG_HAS_IOPORT   Arnd Bergmann
• [PATCH] ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h   Arnd Bergmann
• Latest randconfig build errors   Arnd Bergmann
• socfpga ethernet/MMC support for 3.8   Pavel Machek
• [GIT PULL 0/3] arm-soc: late changes for 3.9   Arnd Bergmann
• [PATCH] ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h   Tony Lindgren
• socfpga ethernet/MMC support for 3.8   Dinh Nguyen
• [PATCH v7 01/10] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [PATCH] ARM: msm: Concentrate defconfig on DT supported devices   Stephen Boyd
• [PATCH v7 01/10] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [PATCH 0/2] Call tracing/debug code in VFP preempt code   Stephen Boyd
• [PATCH 1/2] ARM: Consolidate preempt enable/disable assembly into macros   Stephen Boyd
• [PATCH 2/2] ARM: Enable tracing around vfp preemption enable/disable   Stephen Boyd
• [PATCH/RESEND 0/4] Trim down mach includes in MSM drivers   Stephen Boyd
• [PATCH/RESEND 1/4] ARM: msm: Move dma.h #defines that are private to dma.c   Stephen Boyd
• [PATCH/RESEND 2/4] mmc: msm_sdcc: Remove unnecessary include   Stephen Boyd
• [PATCH/RESEND 3/4] gpio: Make gpio-msm-v1 into a platform driver   Stephen Boyd
• [PATCH/RESEND 4/4] ARM: msm: Remove unused cpu.h header file   Stephen Boyd
• [PATCH] ARM: perf: Fix section mismatch on armpmu_init()   Stephen Boyd
• [PATCH] ARM: proc: Add Krait proc info   Stephen Boyd
• [PATCH 8/8] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH 8/8] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH 1/2] ARM: tegra: add CPU errata WARs to Tegra reset handler   Stephen Warren
• [PATCH 2/2] ARM: tegra: remove save/restore of CPU diag register   Stephen Warren
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Olof Johansson
• [GIT PULL] sunXi dt additions for 3.9, take 2   Olof Johansson
• [PATCH V2 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Viresh Kumar
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Magnus Damm
• [PATCH V2] lglock: add read-preference local-global rwlock   Michel Lespinasse
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCH] mm: Fixup the condition whether the page cache is free   Li Haifeng
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [V8 PATCH 02/16] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Olof Johansson
• [GIT PULL] imx fixes for 3.9   Olof Johansson
• [GIT PULL] mxs fixes for 3.9   Olof Johansson
• [PATCH 00/29] ARM: KVM: pre-arm64 KVM/arm rework   Marc Zyngier
• [PATCH 01/29] ARM: KVM: convert GP registers from u32 to unsigned long   Marc Zyngier
• [PATCH 02/29] ARM: KVM: abstract fault register accesses   Marc Zyngier
• [PATCH 03/29] ARM: KVM: abstract HSR_ISV away   Marc Zyngier
• [PATCH 04/29] ARM: KVM: abstract HSR_WNR away   Marc Zyngier
• [PATCH 05/29] ARM: KVM: abstract HSR_SSE away   Marc Zyngier
• [PATCH 06/29] ARM: KVM: abstract HSR_SRT_{MASK,SHIFT} away   Marc Zyngier
• [PATCH 07/29] ARM: KVM: abstract external abort detection away   Marc Zyngier
• [PATCH 08/29] ARM: KVM: abstract S1TW abort detection away   Marc Zyngier
• [PATCH 09/29] ARM: KVM: abstract SAS decoding away   Marc Zyngier
• [PATCH 10/29] ARM: KVM: abstract IL decoding away   Marc Zyngier
• [PATCH 11/29] ARM: KVM: abstract exception class decoding away   Marc Zyngier
• [PATCH 12/29] ARM: KVM: abstract fault decoding away   Marc Zyngier
• [PATCH 13/29] ARM: KVM: abstract HSR_EC_IABT away   Marc Zyngier
• [PATCH 14/29] ARM: KVM: move kvm_condition_valid to emulate.c   Marc Zyngier
• [PATCH 15/29] ARM: KVM: move exit handler selection to a separate file   Marc Zyngier
• [PATCH 16/29] ARM: KVM: move kvm_handle_wfi to handle_exit.c   Marc Zyngier
• [PATCH 17/29] ARM: KVM: abstract most MMU operations   Marc Zyngier
• [PATCH 18/29] ARM: KVM: remove superfluous include from kvm_vgic.h   Marc Zyngier
• [PATCH 19/29] ARM: KVM: move hyp init to kvm_host.h   Marc Zyngier
• [PATCH 20/29] ARM: KVM: use kvm_kernel_vfp_t as an abstract type for VFP containers   Marc Zyngier
• [PATCH 21/29] ARM: KVM: allow HYP mappings to be at an offset from kernel mappings   Marc Zyngier
• [PATCH 22/29] ARM: KVM: fix address validation for HYP mappings   Marc Zyngier
• [PATCH 23/29] ARM: KVM: sanitize freeing of HYP page tables   Marc Zyngier
• [PATCH 24/29] ARM: KVM: move kvm_target_cpu to guest.c   Marc Zyngier
• [PATCH 25/29] ARM: KVM: fix fault_ipa computing   Marc Zyngier
• [PATCH 26/29] ARM: KVM: vgic: decouple alignment restriction from page size   Marc Zyngier
• [PATCH 27/29] ARM: KVM: move include of asm/idmap.h to kvm_mmu.h   Marc Zyngier
• [PATCH 28/29] ARM: KVM: change kvm_tlb_flush_vmid to kvm_tlb_flush_vmid_ipa   Marc Zyngier
• [PATCH 29/29] ARM: KVM: Fix length of mmio access   Marc Zyngier
• [PATCH] ARM: perf: Fix section mismatch on armpmu_init()   Will Deacon
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Christian Daudt
• [PATCH] ARM: perf: Fix section mismatch on armpmu_init()   Stephen Boyd
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Will Deacon
• [PATCH] ARM: KVM: add support for minimal host vs guest profiling   Marc Zyngier
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Ian Campbell
• [PATCH 00/29] Port of KVM to arm64   Marc Zyngier
• [PATCH 01/29] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
• [PATCH 02/29] arm64: KVM: HYP mode idmap support   Marc Zyngier
• [PATCH 03/29] arm64: KVM: EL2 register definitions   Marc Zyngier
• [PATCH 04/29] arm64: KVM: system register definitions for 64bit guests   Marc Zyngier
• [PATCH 05/29] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Marc Zyngier
• [PATCH 06/29] arm64: KVM: fault injection into a guest   Marc Zyngier
• [PATCH 07/29] arm64: KVM: architecture specific MMU backend   Marc Zyngier
• [PATCH 08/29] arm64: KVM: user space interface   Marc Zyngier
• [PATCH 09/29] arm64: KVM: system register handling   Marc Zyngier
• [PATCH 10/29] arm64: KVM: Cortex-A57 specific system registers handling   Marc Zyngier
• [PATCH 11/29] arm64: KVM: virtual CPU reset   Marc Zyngier
• [PATCH 12/29] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions   Marc Zyngier
• [PATCH 13/29] arm64: KVM: MMIO access backend   Marc Zyngier
• [PATCH 14/29] arm64: KVM: guest one-reg interface   Marc Zyngier
• [PATCH 15/29] arm64: KVM: hypervisor initialization code   Marc Zyngier
• [PATCH 16/29] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
• [PATCH 17/29] arm64: KVM: Exit handling   Marc Zyngier
• [PATCH 18/29] arm64: KVM: Plug the VGIC   Marc Zyngier
• [PATCH 19/29] arm64: KVM: Plug the arch timer   Marc Zyngier
• [PATCH 20/29] arm64: KVM: PSCI implementation   Marc Zyngier
• [PATCH 21/29] arm64: KVM: Build system integration   Marc Zyngier
• [PATCH 22/29] arm64: KVM: define 32bit specific registers   Marc Zyngier
• [PATCH 23/29] arm64: KVM: 32bit GP register access   Marc Zyngier
• [PATCH 24/29] arm64: KVM: 32bit conditional execution emulation   Marc Zyngier
• [PATCH 25/29] arm64: KVM: 32bit handling of coprocessor traps   Marc Zyngier
• [PATCH 26/29] arm64: KVM: 32bit coprocessor access for Cortex-A57   Marc Zyngier
• [PATCH 27/29] arm64: KVM: 32bit specific register world switch   Marc Zyngier
• [PATCH 28/29] arm64: KVM: 32bit guest fault injection   Marc Zyngier
• [PATCH 29/29] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Ian Campbell
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Magnus Damm
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH] DMA: PL330: Add check if device tree compatible   Padma Venkat
• [PATCH v4 2/3] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [PATCH] ARM:SPEAr3xx: fix compilation breakage due to missing header file   Vipul Kumar Samar
• [PATCH] ARM:SPEAr3xx: fix compilation breakage due to missing header file   Viresh Kumar
• [PATCH] arm: davinci: fix edma dmaengine induced null pointer dereference on da830   Sekhar Nori
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Rob Herring
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Ian Campbell
• Multi-platform, and secure-only ARM errata workarounds   Peter De Schrijver
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   javier Martin
• [PATCH 6/9] rtc: stmp3xxx: add sysfs entries for persistent regs   Steffen Trumtrar
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Will Deacon
• Debugging missing interrupts   Bo Shen
• [PATCH] ARM: proc: Add Krait proc info   Will Deacon
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Arnd Bergmann
• [PATCH] ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"   Paul Bolle
• [PATCH] ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"   Viresh Kumar
• [PATCH] dma: of-dma: return error when 'dma-cells' not found   Padmavathi Venna
• [PATCH V2] DMA: PL330: Add check if device tree compatible   Padmavathi Venna
• [RFCv2 0/2] Representing interrupt affinity in devicetree   Mark Rutland
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Ian Campbell
• [PATCH] ARM: dove: Fix typo "COMMON_CLK_DOVE"   Paul Bolle
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   Nicolas Pitre
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Mark Rutland
• [PATCH] dma: of-dma: return error when 'dma-cells' not found   Rob Herring
• [PATCH] arm: mvebu: enable the USB ports on Armada 370 Reference Design board   Florian Fainelli
• [PATCH] ARM: dts: Modify SPI nodes according generic DMA DT bindings   Padmavathi Venna
• [PATCH] dma: of-dma: return error when 'dma-cells' not found   Padma Venkat
• [PATCH] ARM: dts: Modify SPI nodes according generic DMA DT bindings   Sachin Kamat
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Thomas Gleixner
• [PATCH] dma: of-dma: return error when 'dma-cells' not found   Arnd Bergmann
• [PATCH] ARM: dts: Modify SPI nodes according generic DMA DT bindings   Padma Venkat
• [PATCH] ARM: dts: Modify SPI nodes according generic DMA DT bindings   Sylwester Nawrocki
• [PATCH V2] ARM: dts: Modify SPI nodes according generic DMA DT bindings   Padmavathi Venna
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Russell King - ARM Linux
• [PATCH 8/8] ARM: smp: Remove local timer API   Mark Rutland
• [PATCH] ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS   Sascha Hauer
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Felipe Balbi
• [PATCH] ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS   Sascha Hauer
• [PATCH] ARM: imx: avic: Move avic_saved_mask_reg under CONFIG_PM   Sascha Hauer
• [PATCH] ARM: OMAP: RX-51: add missing USB phy binding   Aaro Koskinen
• [PATCH v4 3/5] mmc: davinci_mmc: add DT support   Manjunathappa, Prakash
• [PATCH v4 1/5] ARM: davinci: mmc: derive version information from device name   Manjunathappa, Prakash
• [PATCH] ARM: OMAP: RX-51: add missing USB phy binding   Felipe Balbi
• Latest randconfig build errors   Felipe Balbi
• [PATCH] ARM: OMAP: RX-51: add missing USB phy binding   kishon
• [PATCH v4 3/5] mmc: davinci_mmc: add DT support   Sekhar Nori
• [PATCH v3 -next 0/5] Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH v3 -next 1/5] decompressor: Add LZ4 decompressor module   Kyungsik Lee
• [PATCH v3 -next 2/5] lib: Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH v3 -next 3/5] arm: Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH v3 -next 4/5] x86: Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   Kyungsik Lee
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   Borislav Petkov
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   Florian Fainelli
• [PATCH v2 00/12] ARM: mxs: move to generic DMA device tree binding   Shawn Guo
• [PATCH v2 01/12] ARM: dts: add generic DMA device tree binding for mxs-dma   Shawn Guo
• [PATCH v2 02/12] dma: mxs-dma: use devm_* managed functions   Shawn Guo
• [PATCH v2 03/12] dma: mxs-dma: move to generic device tree binding   Shawn Guo
• [PATCH v2 04/12] mmc: mxs-mmc: move to use generic DMA helper   Shawn Guo
• [PATCH v2 05/12] spi: mxs-spi: move to use generic DMA helper   Shawn Guo
• [PATCH v2 06/12] i2c: i2c-mxs: move to use generic DMA helper   Shawn Guo
• [PATCH v2 07/12] mtd: gpmi: move to use generic DMA helper   Shawn Guo
• [PATCH v2 08/12] serial: mxs-auart: move to use generic DMA helper   Shawn Guo
• [PATCH v2 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Shawn Guo
• [PATCH v2 10/12] ASoC: mxs: move to use generic DMA helper   Shawn Guo
• [PATCH v2 11/12] dma: mxs-dma: remove code left from generic DMA binding conversion   Shawn Guo
• [PATCH v2 12/12] ARM: dts: remove old DMA binding data from client nodes   Shawn Guo
• [PATCH 1/4][v2] Adding Documentation for TDM   Sandeep Singh
• [PATCH 2/4][v2] TDM Framework   Sandeep Singh
• [PATCH 3/4][v2] Added TDM device support and Freescale Starlite driver   Sandeep Singh
• [PATCH 4/4][v2] Basic configuration module for Le88266 Zarlink SLIC   Sandeep Singh
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• [PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Bastian Hecht
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Sekhar Nori
• [PATCH v5] serial: sh-sci: Add OF support - incremental   Bastian Hecht
• [PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Sergei Shtylyov
• [PATCH 1/1] DMA: PL330: No latency implementation of cyclic transfers   Alvaro Moran
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Bastian Hecht
• [PATCH] [RFC] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Dirk Behme
• [PATCH] ARM: dove: Fix typo "COMMON_CLK_DOVE"   Jason Cooper
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Konrad Rzeszutek Wilk
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• [PATCH] ARM: mm: clean-up in order to reduce to call kmap_high_get()   Nicolas Pitre
• Latest randconfig build errors   Sekhar Nori
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Mark Jackson
• [PATCH v2 0/8] ARM: dts: omap: Add dts data for USB   Kishon Vijay Abraham I
• [PATCH v2 1/8] ARM: dts: omap: Add omap control usb data   Kishon Vijay Abraham I
• [PATCH v2 2/8] ARM: dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH v2 3/8] ARM: dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [PATCH v2 4/8] ARM: dts: omap5: Add omap control usb data   Kishon Vijay Abraham I
• [PATCH v2 5/8] ARM: dts: omap5: Add ocp2scp data   Kishon Vijay Abraham I
• [PATCH v2 6/8] ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data   Kishon Vijay Abraham I
• [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data   Kishon Vijay Abraham I
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Shawn Guo
• [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data   Felipe Balbi
• [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data   Sergei Shtylyov
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH] arm: davinci: fix edma dmaengine induced null pointer dereference on da830   Matt Porter
• [RFC PATCH v1 03/33] mm/ARM: use common help functions to free reserved pages   Jiang Liu
• [PATCH] dma: of-dma: return error when 'dma-cells' not found   Rob Herring
• [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data   kishon
• [PATCH] ARM: mxs: cfa10049: Fix fb initialisation function   Maxime Ripard
• v3.9-rc1: [BUG: swapper/1 still has locks held!]   Shawn Guo
• [PATCH V2] lglock: add read-preference local-global rwlock   Lai Jiangshan
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Florian Vaussard
• [PATCH V2] lglock: add read-preference local-global rwlock   Lai Jiangshan
• [PATCH] lglock: add read-preference local-global rwlock   Lai Jiangshan
• [PATCH] ARM: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE   Aaro Koskinen
• [PATCH v2] arm: davinci: fix edma dmaengine induced null pointer dereference on da830   Matt Porter
• v3.9-rc1: [BUG: swapper/1 still has locks held!]   Mandeep Singh Baines
• OMAP baseline test results for v3.8   Paul Walmsley
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   H. Peter Anvin
• [PATCH v3 -next 4/5] x86: Add support for LZ4-compressed kernel   H. Peter Anvin
• [PATCH V2] lglock: add read-preference local-global rwlock   Michel Lespinasse
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Mark Jackson
• [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks   Lai Jiangshan
• [PATCH] ARM: OMAP: RX-51: add missing USB phy binding   Tony Lindgren
• [PATCH] lglock: add read-preference local-global rwlock   Michel Lespinasse
• [PATCH] lglock: add read-preference local-global rwlock   Oleg Nesterov
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH V2] lglock: add read-preference local-global rwlock   Oleg Nesterov
• [PATCH v4 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Alan Stern
• Multi-platform, and secure-only ARM errata workarounds   Stephen Warren
• [PATCH v5 0/2] dma: imx-dma: OFTree support   Markus Pargmann
• [PATCH v5 1/2] dma: imx-dma: Add oftree support   Markus Pargmann
• [PATCH v5 2/2] DMA: imx-dma: imxdma->dev used uninitialized   Markus Pargmann
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Felipe Balbi
• [GIT PULL] omap fixes for v3.9-rc1   Tony Lindgren
• [PATCH v2 0/2] video: imxfb DT support   Markus Pargmann
• [PATCH v2 1/2] imxfb: Set alpha value of the framebuffer   Markus Pargmann
• [PATCH v2 2/2] video: imxfb: Add DT support   Markus Pargmann
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH 01/23] ARM: exynos: introduce EXYNOS_ATAGS symbol   Arnd Bergmann
• [PATCH 02/23] irqchip: exynos: remove dependency on mach/irqs.h   Arnd Bergmann
• [PATCH 03/23] tty: serial/samsung: prepare for common clock API   Arnd Bergmann
• [PATCH 04/23] tty: serial/samsung: make register definitions global   Arnd Bergmann
• [PATCH 05/23] tty: serial/samsung: fix modular build   Arnd Bergmann
• [PATCH 06/23] ARM: exynos: move debug-macro.S to include/debug/   Arnd Bergmann
• [PATCH 07/23] i2c: s3c2410: make header file local   Arnd Bergmann
• [PATCH 08/23] mmc: sdhci-s3c: remove platform dependencies   Arnd Bergmann
• [PATCH 09/23] usb: exynos: do not include plat/usb-phy.h   Arnd Bergmann
• [PATCH 10/23] [media] exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 11/23] video/exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 12/23] thermal/exynos: remove unnecessary header inclusions   Arnd Bergmann
• [PATCH 13/23] mtd: onenand/samsung: make regs-onenand.h file local   Arnd Bergmann
• [PATCH 14/23] rtc: s3c: make header file local   Arnd Bergmann
• [PATCH 15/23] spi: s3c64xx: move to generic dmaengine API   Arnd Bergmann
• [PATCH 16/23] pwm: samsung: repair the worst MMIO abuses   Arnd Bergmann
• [PATCH 17/23] ASoC: samsung: move plat/ headers to local directory   Arnd Bergmann
• [PATCH 18/23] ASoC: samsung: convert to dmaengine API   Arnd Bergmann
• [PATCH 19/23] ASoC: samsung: use irq resource for idma   Arnd Bergmann
• [PATCH 20/23] ARM: exynos: prepare for sparse IRQ   Arnd Bergmann
• [PATCH 21/23] ARM: exynos: hack to disable private clock code   Arnd Bergmann
• [PATCH 22/23] ARM: exynos: work around missing gpio code on multiplatform   Arnd Bergmann
• [PATCH 23/23] ARM: exynos: experimental multiplatform support   Arnd Bergmann
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Ezequiel Garcia
• [PATCH V2] lglock: add read-preference local-global rwlock   Srivatsa S. Bhat
• [PATCH] ARM: dove: Fix typo "COMMON_CLK_DOVE"   Jean-Francois Moine
• [PATCH V2 REPOST] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Stephen Warren
• [PATCH] ARM: dove: Fix typo "COMMON_CLK_DOVE"   Paul Bolle
• [PATCH 01/10] gpio: tegra: add gpio wakeup source handling   Stephen Warren
• [PATCH 1/3] pinctrl: exynos: add exynos5250 SoC specific data   Thomas Abraham
• [PATCH v6 04/46] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks   Srivatsa S. Bhat
• [PATCH 00/23] RFC: exynos multiplatform support   Tony Lindgren
• [PATCH 00/23] RFC: exynos multiplatform support   Tomasz Figa
• [PATCH 03/10] ARM: tegra: get power management configurations for PMC from DT   Stephen Warren
• [PATCH] ARM: dove: Fix typo "COMMON_CLK_DOVE"   Sebastian Hesselbarth
• [PATCH 03/10] ARM: tegra: get power management configurations for PMC from DT   Stephen Warren
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH 8/8] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH 04/10] ARM: tegra: pm: add platform suspend support   Stephen Warren
• [PATCH] ARM: EXYNOS: remove EXYNOS_DEV_SYSMMU entirely   Paul Bolle
• [PATCH 05/10] ARM: dt: tegra: add bindings of power management configurations for PMC   Stephen Warren
• [PATCH 06/10] ARM: dts: tegra: add the PM configurations of PMC   Stephen Warren
• [PATCH 5/8] ARM: MSM: Divorce msm_timer from local timer API   David Brown
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH v4 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Arnd Bergmann
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Arnd Bergmann
• [PATCH v5] serial: sh-sci: Add OF support - incremental   Arnd Bergmann
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Arnd Bergmann
• [PATCH v2 01/12] ARM: dts: add generic DMA device tree binding for mxs-dma   Arnd Bergmann
• [PATCH v2 00/12] ARM: mxs: move to generic DMA device tree binding   Arnd Bergmann
• [PATCH] dma: of-dma: return error when 'dma-cells' not found   Arnd Bergmann
• [GIT PULL] sunXi dt additions for 3.9, take 2   Maxime Ripard
• RFC: Zynq Clock Controller   Sören Brinkmann
• [PATCH v2] ARM: dove: drop "select COMMON_CLK_DOVE"   Paul Bolle
• [PATCH 2/4][V2] time : set broadcast irq affinity   Thomas Gleixner
• [PATCH] arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED   Paul Bolle
• [PATCH 00/23] RFC: exynos multiplatform support   Heiko Stübner
• [PATCH v8 0/9] DMA Engine support for AM33XX   Matt Porter
• [PATCH v8 1/9] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [PATCH v8 2/9] ARM: edma: remove unused transfer controller handlers   Matt Porter
• [PATCH v8 3/9] ARM: edma: add AM33XX support to the private EDMA API   Matt Porter
• [PATCH v8 4/9] dmaengine: edma: enable build for AM33XX   Matt Porter
• [PATCH v8 5/9] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• [PATCH v8 6/9] ARM: dts: add AM33XX EDMA support   Matt Porter
• [PATCH v8 7/9] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()   Matt Porter
• [PATCH v8 8/9] spi: omap2-mcspi: add generic DMA request support to the DT binding   Matt Porter
• [PATCH v8 9/9] ARM: dts: add AM33XX SPI DMA support   Matt Porter
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH] ARM: proc: Add Krait proc info   Stephen Boyd
• [PATCH 00/23] RFC: exynos multiplatform support   Tomasz Figa
• [PATCH 0/9] fixes for ARM build regressions in 3.9-rc1   Arnd Bergmann
• [PATCH 1/9] clk: vt8500: Fix "fix device clock divisor calculations"   Arnd Bergmann
• [PATCH 2/9] Revert parts of "hlist: drop the node parameter from iterators"   Arnd Bergmann
• [PATCH 3/9] mfd: remove __exit_p annotation for twl4030_madc_remove   Arnd Bergmann
• [PATCH 4/9] usb: gadget: fix omap_udc build errors   Arnd Bergmann
• [PATCH 5/9] ARM: omap1: add back missing includes   Arnd Bergmann
• [PATCH 6/9] [media] ir-rx51: fix clock API related build issues   Arnd Bergmann
• [PATCH 7/9] [media] s5p-fimc: fix s5pv210 build   Arnd Bergmann
• [PATCH 8/9] iommu: OMAP: build only on OMAP2+   Arnd Bergmann
• [PATCH 9/9] ARM: spear3xx: Use correct pl080 header file   Arnd Bergmann
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH 4/9] usb: gadget: fix omap_udc build errors   Felipe Balbi
• [PATCH 00/23] RFC: exynos multiplatform support   Heiko Stübner
• [PATCH 5/9] ARM: omap1: add back missing includes   Arnd Bergmann
• [GIT PULL] omap fixes for v3.9-rc1   Arnd Bergmann
• [PATCH] ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"   Arnd Bergmann
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Arnd Bergmann
• [PATCH 1/2] ARM: exynos: pl330: Add #dma-cells for generic dma binding support   Arnd Bergmann
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [REPOST PATCH 0/2] Table lookup for mux clock type   Stephen Warren
• [PATCH 00/23] RFC: exynos multiplatform support   Tomasz Figa
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Christian Daudt
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Christian Daudt
• [PATCH v3 -next 0/5] Add support for LZ4-compressed kernel   Andrew Morton
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   Andrew Morton
• [PATCH 2/2] Arm: socfpga: pl330: Add #dma-cells for generic dma binding support   Dinh Nguyen
• My git tree, and tsinghua.edu.cn   Russell King - ARM Linux
• [PATCH 9/9] ARM: spear3xx: Use correct pl080 header file   Viresh Kumar
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Marek Vasut
• [PATCH v3 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Naveen Krishna Ch
• [PATCH v3 3/3] ARM: dts: Add sbs-battery for exynos5250-snow   Naveen Krishna Ch
• [REPOST PATCH 0/2] Table lookup for mux clock type   Stephen Warren
• [PATCH 00/04] ARM: shmobile: TWD update   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Register DT TWD from timer.c   Magnus Damm
• [PATCH 02/04] ARM: shmobile: Add EMEV2 specific timer_init   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Add EMEV2 TWD support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: Remove r8a7779_register_twd() from common.h   Magnus Damm
• [PATCH 6/9] [media] ir-rx51: fix clock API related build issues   Mauro Carvalho Chehab
• [PATCH] ARM: proc: Add Krait proc info   Will Deacon
• [PATCH 4/9] usb: gadget: fix omap_udc build errors   Greg Kroah-Hartman
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Paul Mundt
• [PATCH 5/9] ARM: omap1: add back missing includes   Tony Lindgren
• [PATCH 3/9] mfd: remove __exit_p annotation for twl4030_madc_remove   Tony Lindgren
• [PATCH] mm: Fixup the condition whether the page cache is free   Simon Jeons
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Paul Mundt
• [PATCH 6/9] [media] ir-rx51: fix clock API related build issues   Tony Lindgren
• [PATCH 8/9] iommu: OMAP: build only on OMAP2+   Tony Lindgren
• [PATCH v2 08/12] serial: mxs-auart: move to use generic DMA helper   Greg Kroah-Hartman
• [PATCH] [RFC] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Will Deacon
• [PATCH 00/04] ARM: shmobile: TWD update   Simon Horman
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Will Deacon
• [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.   Anil Kumar
• [PATCH 1/2] ARM: bcm2835: add SPI device to DT   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: defconfig update   Stephen Warren
• [PATCH v8 6/9] ARM: dts: add AM33XX EDMA support   Kumar, Anil
• [PATCH] clocksource: sh_cmt: Set initcall level to subsys   Simon Horman
• [PATCH 0/2] imx6q: Add additional device tree definitions   Sean Cross
• [PATCH 1/2] imx6q: Add ECSPI3 device definition   Sean Cross
• [PATCH 2/2] imx6q: Add device definition for i2c2 and i2c3   Sean Cross
• [PATCH v2 01/12] ARM: dts: add generic DMA device tree binding for mxs-dma   Shawn Guo
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Shawn Guo
• [PATCH 1/2] ARM: exynos: pl330: Add #dma-cells for generic dma binding support   Padma Venkat
• [PATCH] ARM: proc: Add Krait proc info   Stephen Boyd
• Should a swapped out page be deleted from swap cache?   Li Haifeng
• [PATCH V2 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   amit kachhap
• [PATCH v3 -next 0/5] Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH V2 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Viresh Kumar
• [PATCH 6/9] [media] ir-rx51: fix clock API related build issues   Timo Kokkonen
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Arnd Bergmann
• [PATCH v3 -next 4/5] x86: Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH V2 REPOST] kbuild: create an "include chroot" for DT bindings   Rob Herring
• [PATCH] [RFC] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Dirk Behme
• [PATCH 02/08] ARM: shmobile: Rework SH73A0_SCU_BASE IOMEM() usage   Magnus Damm
• [REPOST PATCH 0/2] Table lookup for mux clock type   Peter De Schrijver
• [PATCH] ARM: gemini: fix build errors   Arnd Bergmann
• [PATCH 4/9] usb: gadget: fix omap_udc build errors   Felipe Balbi
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Felipe Balbi
• Multi-platform, and secure-only ARM errata workarounds   Peter De Schrijver
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCH 05/32] lib: devres: don't enclose pcim_*() functions in CONFIG_HAS_IOPORT   Thomas Petazzoni
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Felipe Balbi
• [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data   kishon
• [PATCH 18/23] ASoC: samsung: convert to dmaengine API   Padma Venkat
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCH] ARM: OMAP: RX-51: add missing USB phy binding   kishon
• [PATCH 15/23] spi: s3c64xx: move to generic dmaengine API   Padma Venkat
• [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data   Felipe Balbi
• [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data   kishon
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Felipe Balbi
• [PATCH 2/4][V2] time : set broadcast irq affinity   Daniel Lezcano
• [PATCH 2/4][V2] time : set broadcast irq affinity   Thomas Gleixner
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH] ARM: mach-bcm: drop "select GENERIC_TIME"   Paul Bolle
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH v11 0/9] Add tested id switch and vbus connect detect support for Chipidea   Peter Chen
• [PATCH v11 1/9] Revert "USB: chipidea: add vbus detect for udc"   Peter Chen
• [PATCH v11 2/9] usb: chipidea: add otg file   Peter Chen
• [PATCH v11 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect   Peter Chen
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Peter Chen
• [PATCH v11 5/9] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS   Peter Chen
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Peter Chen
• [PATCH v11 7/9] usb: chipidea: delete the delayed work   Peter Chen
• [PATCH v11 8/9] usb: chipidea: imx: add getting vbus regulator code   Peter Chen
• [PATCH v11 9/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget   Peter Chen
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   Florian Fainelli
• [PATCH v11 8/9] usb: chipidea: imx: add getting vbus regulator code   Felipe Balbi
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• [GIT PULL 3.9] Various fixes for Marvell EBU platforms   Thomas Petazzoni
• [PATCH 1/4] arm: mvebu: Reduce reg-io-width with UARTs   Thomas Petazzoni
• [PATCH 2/4] arm: plat-orion: fix address decoding when > 4GB is used   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: fix address-cells in mpic DT node   Thomas Petazzoni
• [PATCH 4/4] arm: mach-orion5x: fix typo in compatible string of a .dts file   Thomas Petazzoni
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Mark Jackson
• [PATCH v4 1/3] serial: sh-sci: Add OF support   Arnd Bergmann
• v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]   Maxime Ripard
• [PATCH] ARM: EXYNOS: change HAVE_SAMSUNG_KEYPAD to KEYBOARD_SAMSUNG   Paul Bolle
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Arnd Bergmann
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH] ARM: drop "select HAVE_SCHED_CLOCK"   Paul Bolle
• Should a swapped out page be deleted from swap cache?   Ric Mason
• Should a swapped out page be deleted from swap cache?   Ric Mason
• [PATCH v3 -next 5/5] Kconfig: Make x86 and arm kernels default to the LZ4-compressed   Borislav Petkov
• [PATCH v2 0/3] pinctrl: exynos: add support for Samsung's Exynos5250   Thomas Abraham
• [PATCH v2 1/3] pinctrl: exynos: add exynos5250 SoC specific data   Thomas Abraham
• [PATCH v2 2/3] gpio: samsung: skip gpiolib registration if pinctrl support is enabled for exynos5250   Thomas Abraham
• [PATCH v2 3/3] arm: exynos: skip wakeup interrupt registration for exynos5250 if pinctrl is enabled   Thomas Abraham
• [patch 0/7] tick: Optimize broadcast handling and prevent expiry ping pong   Thomas Gleixner
• [patch 1/7] tick: Call tick_init late   Thomas Gleixner
• [patch 2/7] tick: Convert broadcast cpu bitmaps to cpumask_var_t   Thomas Gleixner
• [patch 3/7] tick: Avoid programming the local cpu timer if broadcast pending   Thomas Gleixner
• [patch 4/7] tick: Handle broadcast wakeup of multiple cpus   Thomas Gleixner
• [patch 5/7] tick: Provide a check for a forced broadcast pending   Thomas Gleixner
• [patch 6/7] arm: Use tick broadcast expired check   Thomas Gleixner
• [patch 7/7] x86: Use tick broadcast expired check   Thomas Gleixner
• [PATCH 5/9] ARM: omap1: add back missing includes   Arnd Bergmann
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Felipe Balbi
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Arnd Bergmann
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Felipe Balbi
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• [PATCH v6 2/3] ARM: mach-shmobile: r8a7740: Add DT names to clock list   Bastian Hecht
• [PATCH v6 3/3] ARM: mach-shmobile: r8a7740: Setup the serial devices using DT   Bastian Hecht
• [PATCH] mmc: sdhci-s3c: let device core setup the default pin configuration   Thomas Abraham
• [PATCH] serial: sh-sci: OF support finishing   Bastian Hecht
• [PATCH] ASoC: samsung: let device core setup the default pin configuration   Mark Brown
• [PATCH] ASoC: samsung: let device core setup the default pin configuration   Heiko Stübner
• [PATCH] spi: s3c64xx: let device core setup the default pin configuration   Thomas Abraham
• [PATCH] ASoC: samsung: let device core setup the default pin configuration   Mark Brown
• RFC: Zynq Clock Controller   Jan Lübbe
• [PATCH] ASoC: samsung: let device core setup the default pin configuration   Thomas Abraham
• [PATCH] ASoC: samsung: let device core setup the default pin configuration   Thomas Abraham
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Ezequiel Garcia
• [PATCH 18/23] ASoC: samsung: convert to dmaengine API   Arnd Bergmann
• [PATCH] mmc: dwmmc: let device core setup the default pin configuration   Thomas Abraham
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Laurent Pinchart
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Laurent Pinchart
• [PATCH 00/23] RFC: exynos multiplatform support   Thierry Reding
• [PATCH 2/4][V2] time : set broadcast irq affinity   Daniel Lezcano
• [PATCH 0/2] ARM: dts: Add default pin states for client nodes on Exynos4/5 platforms   Thomas Abraham
• [PATCH 1/2] ARM: dts: add pin state information in client nodes for Exynos4 platforms   Thomas Abraham
• [PATCH 2/2] ARM: dts: add pin state information in client nodes for Exynos5 platforms   Thomas Abraham
• [PATCH 6/9] rtc: stmp3xxx: add sysfs entries for persistent regs   Steffen Trumtrar
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Simon Guinot
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Mark Jackson
• v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]   Alexander Shishkin
• [PATCH 3.10] Introduce a Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 01/10] arm: plat-orion: only build addr-map.c when needed   Thomas Petazzoni
• [PATCH 02/10] arm: plat-orion: use mv_mbus_dram_info() in PCIe code   Thomas Petazzoni
• [PATCH 03/10] arm: mach-orion5x: use mv_mbus_dram_info() in PCI code   Thomas Petazzoni
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 05/10] arm: mach-mvebu: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 06/10] arm: mach-kirkwood: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 07/10] arm: mach-dove: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 08/10] arm: mach-orion5x: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 09/10] arm: mach-mv78xx0: convert to use the mvebu-mbus driver   Thomas Petazzoni
• [PATCH 10/10] arm: plat-orion: remove addr-map code   Thomas Petazzoni
• [PATCH 1/3] clocksource: sh_cmt: Add Device Tree probing   Bastian Hecht
• [PATCH 05/10] arm: mach-mvebu: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH v8 6/9] ARM: dts: add AM33XX EDMA support   Matt Porter
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Pali Rohár
• v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]   Maxime Ripard
• [GIT PULL] ARM: CSR: minor fixes for 3.9-rc1   Barry Song
• [PATCH] ARM: bcm281xx: Add L2 cache enable code   Christian Daudt
• [PATCH 0/2] pinctrl: sunxi: Add missing pin functions   Maxime Ripard
• [PATCH 1/2] pinctrl: sunxi: Add Allwinner A10 pin functions   Maxime Ripard
• [PATCH 2/2] pinctrl: sunxi: Add Allwinner A13 pin functions   Maxime Ripard
• [PATCH] ARM: sunxi: dt: Add support for the Miniand Mini X-plus   Maxime Ripard
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Thomas Gleixner
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Paul Mundt
• [PATCH 0/5] Extend UART support for Allwinner SoCs   Maxime Ripard
• [PATCH 1/5] ARM: sunxi: dt: Use clocks property instead of clock-frequency for the UARTs   Maxime Ripard
• [PATCH 2/5] ARM: sunxi: dt: Move uart0 to sun4i-a10.dtsi   Maxime Ripard
• [PATCH 3/5] ARM: sunxi: dt: Add uart3 dt node   Maxime Ripard
• [PATCH 4/5] ARM: sunxi: dt: Add A10 UARTs to the dtsi.   Maxime Ripard
• [PATCH 5/5] ARM: sunxi: hackberry: Add UART muxing   Maxime Ripard
• [PATCH V2 REPOST] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [PATCH v9 0/9] DMA Engine support for AM33XX   Matt Porter
• [PATCH v9 1/9] ARM: davinci: move private EDMA API to arm/common   Matt Porter
• [PATCH v9 2/9] ARM: edma: remove unused transfer controller handlers   Matt Porter
• [PATCH v9 3/9] ARM: edma: add AM33XX support to the private EDMA API   Matt Porter
• [PATCH v9 4/9] dmaengine: edma: enable build for AM33XX   Matt Porter
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• [PATCH v9 6/9] ARM: dts: add AM33XX EDMA support   Matt Porter
• [PATCH v9 7/9] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()   Matt Porter
• [PATCH v9 8/9] spi: omap2-mcspi: add generic DMA request support to the DT binding   Matt Porter
• [PATCH v9 9/9] ARM: dts: add AM33XX SPI DMA support   Matt Porter
• Multi-platform, and secure-only ARM errata workarounds   Stephen Warren
• [PATCH for 3.10] Misc small improvements to Kirkwood-based OpenBlocks A6 platform   Thomas Petazzoni
• [PATCH 1/3] arm: kirkwood: affect pins to their devices on OpenBlocks A6   Thomas Petazzoni
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Thomas Petazzoni
• [PATCH 3/3] arm: kirkwood: add support for Init button on OpenBlocks A6   Thomas Petazzoni
• EDMA and kernel panic (null pointer) on da830   Tomas Novotny
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• EDMA and kernel panic (null pointer) on da830   Matt Porter
• [PATCH] ARM: shmobile: r8a7740: Add CPU Core Standby Mode   Russell King - ARM Linux
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Marek Vasut
• [PATCH 0/2] Add support for the Solomon SSD1306 OLED Controller   Maxime Ripard
• [PATCH 1/2] video: ssd1307fb: Add support for SSD1306 OLED controller   Maxime Ripard
• [PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306   Maxime Ripard
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Russell King - ARM Linux
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Russell King - ARM Linux
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Mark Jackson
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Ezequiel Garcia
• [PATCH v2] arm: davinci: fix edma dmaengine induced null pointer dereference on da830   Tomas Novotny
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 01/10] arm: plat-orion: only build addr-map.c when needed   Thomas Petazzoni
• [PATCH 02/10] arm: plat-orion: use mv_mbus_dram_info() in PCIe code   Thomas Petazzoni
• [PATCH 03/10] arm: mach-orion5x: use mv_mbus_dram_info() in PCI code   Thomas Petazzoni
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 05/10] arm: mach-mvebu: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 06/10] arm: mach-kirkwood: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 07/10] arm: mach-dove: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 08/10] arm: mach-orion5x: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH 09/10] arm: mach-mv78xx0: convert to use the mvebu-mbus driver   Thomas Petazzoni
• [PATCH 10/10] arm: plat-orion: remove addr-map code   Thomas Petazzoni
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH v11 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect   Alexander Shishkin
• [PATCH] [RFC] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Russell King - ARM Linux
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Russell King - ARM Linux
• [PATCH 6/9] [media] ir-rx51: fix clock API related build issues   Tony Lindgren
• EDMA and kernel panic (null pointer) on da830   Tomas Novotny
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Russell King - ARM Linux
• RFC: Zynq Clock Controller   Sören Brinkmann
• [PATCH] [RFC] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Dirk Behme
• [PATCH 5/9] ARM: omap1: add back missing includes   Tony Lindgren
• Invitation: EURO CHECK Loan Limited Offers Loan At 2% RATE Apply Now!!!   infoonline_agent4 at nokiamail.com
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.   Tony Lindgren
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Andrew Lunn
• [PATCH 1/3] arm: kirkwood: affect pins to their devices on OpenBlocks A6   Andrew Lunn
• [PATCH 1/7] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [PATCH 2/7] kbuild: fixdep: support concatenated dep files   Stephen Warren
• [PATCH 3/7] kbuild: cmd_dtc_cpp: extract deps from both gcc -E and dtc   Stephen Warren
• [PATCH 4/7] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp   Stephen Warren
• [PATCH 5/7] ARM: dt: add header to define GPIO flags   Stephen Warren
• [PATCH 6/7] ARM: dt: add header to define IRQ flags   Stephen Warren
• [PATCH 7/7] ARM: dt: create a DT header for the GIC   Stephen Warren
• [PATCH 05/32] lib: devres: don't enclose pcim_*() functions in CONFIG_HAS_IOPORT   Jason Gunthorpe
• [PATCH 3/3] arm: kirkwood: add support for Init button on OpenBlocks A6   Andrew Lunn
• [PATCH V2 1/6] ARM: tegra: device tree whitespace cleanup   Stephen Warren
• [PATCH V2 2/6] ARM: tegra: fix sort order of USB PHY nodes   Stephen Warren
• [PATCH V2 3/6] ARM: tegra: use #include for all device trees   Stephen Warren
• [PATCH V2 4/6] ARM: tegra: create a DT header defining GPIO IDs   Stephen Warren
• [PATCH V2 5/6] ARM: tegra: convert device tree files to use GPIO defines   Stephen Warren
• [PATCH V2 6/6] ARM: tegra: convert device tree files to use IRQ defines   Stephen Warren
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Russell King - ARM Linux
• [PATCH] [RFC] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Russell King - ARM Linux
• [PATCH v11 9/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget   Russell King - ARM Linux
• [PATCH 1/3] arm: kirkwood: affect pins to their devices on OpenBlocks A6   Thomas Petazzoni
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 06/10] arm: mach-kirkwood: convert to use mvebu-mbus driver   Jason Gunthorpe
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Dirk Behme
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Thomas Petazzoni
• [PATCH 1/5] ARM: sunxi: dt: Use clocks property instead of clock-frequency for the UARTs   Emilio López
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 06/10] arm: mach-kirkwood: convert to use mvebu-mbus driver   Thomas Petazzoni
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• 3.9-rc1 regression in arm dtb build   Thomas Petazzoni
• [PATCH] mm: Fixup the condition whether the page cache is free   Johannes Weiner
• [PATCH] ARM: LPC32xx: changed lpc23xx_restart to lpc32xx_restart   Martin Knoll
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Peter Korsgaard
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH V2 1/6] ARM: tegra: device tree whitespace cleanup   Stephen Warren
• [PATCH 1/2] ARM: tegra: add CPU errata WARs to Tegra reset handler   Stephen Warren
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• [PATCH] clocksource: tegra: move to of_clk_get   Stephen Warren
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH] ARM: tegra: don't unlock MMIO access to DBGLAR   Stephen Warren
• [2/2] ARM: dt: tegra: add default pinctrl nodes for Dalmore   Stephen Warren
• [PATCH 1/3] ARM: tegra: Fix unchecked return value   Stephen Warren
• [PATCH V2 1/2] ARM: tegra: pmc: add specific compatible DT string for Tegra30 and Tegra114   Stephen Warren
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH V2 0/4] ARM: tegra114: bring up secondary CPU for SMP   Stephen Warren
• [PATCH 1/1] clk: tegra: Fix periph_clk_to_bit macro   Stephen Warren
• [PATCH 00/23] RFC: exynos multiplatform support   Heiko Stübner
• [PATCH] ARM: OMAP1: fix omap_udc registration   Aaro Koskinen
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Cooper
• 3.9-rc1 regression in arm dtb build   Stephen Warren
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Paul Bolle
• [PATCH 00/23] RFC: exynos multiplatform support   Tomasz Figa
• [PATCH 00/23] RFC: exynos multiplatform support   Tomasz Figa
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH] clk: tegra: provide dummy cpu car ops   Andrew Chew
• [PATCH v4 0/3] R-Car SATA platform data   Sergei Shtylyov
• [PATCH] clk: tegra: provide dummy cpu car ops   Stephen Warren
• [PATCH 7/9] [media] s5p-fimc: fix s5pv210 build   Kukjin Kim
• [PATCH v6 09/10] clk: tegra: Implement clocks for Tegra114   Andrew Chew
• [PATCH] clk: tegra: provide dummy cpu car ops   Andrew Chew
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Kukjin Kim
• [PATCHv2 0/10] Remove ARM local timer API   Stephen Boyd
• [PATCH 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCH 02/10] ARM: smp: Remove duplicate dummy timer implementation   Stephen Boyd
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH 04/10] ARM: OMAP2+: Divorce from local timer API   Stephen Boyd
• [PATCH 05/10] ARM: EXYNOS4: Divorce mct from local timer API   Stephen Boyd
• [PATCH 06/10] ARM: PRIMA2: Divorce timer-marco from local timer API   Stephen Boyd
• [PATCH 07/10] ARM: msm: Divorce msm_timer from local timer API   Stephen Boyd
• [PATCH 08/10] clocksource: time-armada-370-xp: Fix sparse warning   Stephen Boyd
• [PATCH 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
• [PATCH 10/10] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH] clk: tegra: provide dummy cpu car ops   Stephen Warren
• [kvmarm] [PATCH 00/29] ARM: KVM: pre-arm64 KVM/arm rework   Christoffer Dall
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Paul Bolle
• [PATCH v2 0/3] pinctrl: exynos: add support for Samsung's Exynos5250   Kukjin Kim
• [PATCH] ARM: drop "select HAVE_SCHED_CLOCK"   Kukjin Kim
• [PATCH] ARM: tegra: fix ignored return value of regulator_enable   Stephen Warren
• [PATCH 0/6] Qualcomm SSBI bus driver   David Brown
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH 2/6] SSBI: Convert SSBI to device tree   David Brown
• [PATCH 3/6] ssbi: Fix exit mismatch in remove function   David Brown
• [PATCH 4/6] ssbi: Use regular init level   David Brown
• [PATCH 5/6] ARM: msm: enable SSBI driver in defconfig   David Brown
• [PATCH 6/6] RFC: SSBI: Simple pm8058 test driver   David Brown
• [PATCH 2/4] arm: plat-orion: fix address decoding when > 4GB is used   Jason Cooper
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH] ARM: KVM: add support for minimal host vs guest profiling   Christoffer Dall
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Harvey Harrison
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Kukjin Kim
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Russell King - ARM Linux
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Russell King - ARM Linux
• [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCH] ARM: EXYNOS: change HAVE_SAMSUNG_KEYPAD to KEYBOARD_SAMSUNG   Kukjin Kim
• [PATCH] mm: Fixup the condition whether the page cache is free   Simon Jeons
• [PATCH] ARM: EXYNOS: remove EXYNOS_DEV_SYSMMU entirely   Kukjin Kim
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Kukjin Kim
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Greg Kroah-Hartman
• [PATCH 3/6] ssbi: Fix exit mismatch in remove function   Greg Kroah-Hartman
• [PATCH 1/2] ARM: exynos: pl330: Add #dma-cells for generic dma binding support   Kukjin Kim
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Kukjin Kim
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Olof Johansson
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Olof Johansson
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [GIT PULL] Nomadik multiplatform support for ARM SoC   Linus Walleij
• [PATCH v11 8/9] usb: chipidea: imx: add getting vbus regulator code   Peter Chen
• [GIT PULL 0/5] Samsung changes-1 for v3.10   Kukjin Kim
• [GIT PULL 1/5] Samsung cleanup-s3c for v3.10   Kukjin Kim
• [GIT PULL 2/5] Samsung cleanup-s5p for v3.10   Kukjin Kim
• [GIT PULL 3/5] Samsung timer for v3.10   Kukjin Kim
• [GIT PULL 4/5] Samsung irq-s3c24xx for v3.10   Kukjin Kim
• [GIT PULL 5/5] Samsung pinctrl-exynos5250 for v3.10   Kukjin Kim
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Mark Brown
• [PATCH 02/14] MAINTAINERS: remove arch/arm/plat-nomadik/   Linus Walleij
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Peter Chen
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Peter Chen
• [PATCH] ARM: mxs_defconfig: Select watchdog driver   Shawn Guo
• [RFC PATCH] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH v11 9/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget   Peter Chen
• [PATCH] ARM: mxs: cfa10049: Fix fb initialisation function   Shawn Guo
• [PATCH 1/2] imx6q: Add ECSPI3 device definition   Shawn Guo
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Will Deacon
• [PATCH v4 0/3] R-Car SATA platform data   Simon Horman
• [PATCH v2 0/3] pinctrl: exynos: add support for Samsung's Exynos5250   Thomas Abraham
• [PATCH v6 00/16] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support   Wenyou Yang
• [PATCH 2/2] pinctrl: imx: use pin_func_ids to search the pinctrl item.   Linus Walleij
• [PATCH v2 0/3] pinctrl: exynos: add support for Samsung's Exynos5250   Kukjin Kim
• [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Wenyou Yang
• [PATCH v6 02/16] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register.   Wenyou Yang
• [PATCH v6 03/16] spi/spi-atmel: add support transfer on CS1, 2, 3, not only on CS0   Wenyou Yang
• [PATCH v6 04/16] spi/spi-atmel: add physical base address   Wenyou Yang
• [PATCH v6 05/16] spi/spi-atmel: call unmapping on transfers buffers   Wenyou Yang
• [PATCH v6 06/16] spi/spi-atmel: status information passed through controller data   Wenyou Yang
• [PATCH v6 07/16] spi/spi-atmel: add flag to controller data for lock operations   Wenyou Yang
• [PATCH v6 08/16] spi/spi-atmel: add dmaengine support   Wenyou Yang
• [PATCH v6 09/16] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes   Wenyou Yang
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Will Deacon
• [PATCH v6 10/16] spi/spi-atmel: correct 16 bits transfers using PIO   Wenyou Yang
• [PATCH v6 11/16] spi/spi-atmel: correct 16 bits transfers with DMA   Wenyou Yang
• [PATCH v6 12/16] spi/spi-atmel: add pinctrl support for atmel spi   Wenyou Yang
• [PATCH v6 13/16] ARM: at91: add clocks for spi dt entries   Wenyou Yang
• [PATCH v6 14/16] ARM: dts: add spi nodes for atmel SoC   Wenyou Yang
• [PATCH v6 15/16] ARM: dts: add spi nodes for the atmel boards   Wenyou Yang
• [PATCH v6 16/16] ARM: dts: add pinctrl property for spi node for atmel SoC   Wenyou Yang
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [RFC PATCH] ARM: keep __my_cpu_offset consistent with generic one   Will Deacon
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [RFC PATCH] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Amit Daniel Kachhap
• [PATCH V3 2/4] cpufreq: exynos: Remove error return even if no soc is found   Amit Daniel Kachhap
• [PATCH V3 3/4] arm: exynos: Enable OPP library support for exynos5440   Amit Daniel Kachhap
• [PATCH V3 4/4] dts: Add cpufreq controller node for Exynos5440 SoC   Amit Daniel Kachhap
• [PATCH 0/2] AM33xx mmc support   Matt Porter
• [PATCH 1/2] mmc: omap_hsmmc: set max_segs based on dma engine limits   Matt Porter
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [PATCH] ARM:SPEAr3xx: fix compilation breakage due to missing header file   Linus Walleij
• [GIT PULL] AB8500 Power and MFD related updates   Lee Jones
• [PATCH] arm: mm: Populate initial page tables across sections   Laura Abbott
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH 3/6] ssbi: Fix exit mismatch in remove function   David Brown
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• [PATCH v11 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect   Peter Chen
• [patch 2/7] tick: Convert broadcast cpu bitmaps to cpumask_var_t   Rusty Russell
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Arnd Bergmann
• [PATCH v2 0/3] ARM: dts: imx6q: Add additional pinctrl entries   Sean Cross
• [PATCH v2 1/3] ARM: dts: imx6q: Add pinctrl for ecspi3   Sean Cross
• [PATCH v2 2/3] ARM: dts: imx6q: Add pinctrl for i2c2 and i2c3   Sean Cross
• [PATCH v2 3/3] ARM: dts: imx6q: Add pinctrl for audmix on AUD3   Sean Cross
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Greg Kroah-Hartman
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration   Linus Walleij
• [PATCH 1/9] MXS/i.MX28: add the possibility to define the used crystals via device tree   Shawn Guo
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Andrew Lunn
• [RESEND 0/2] davinci: Add device tree data for tps6507x.   Vishwanathrao Badarkhe, Manish
• [PATCH 2/9] MXS/i.MX28: add the possibility to define the external RTC crystal   Shawn Guo
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Nicolas Pitre
• [PATCH 3/9] MXS/i.MX28: prepare different clocking of the built-in RTC   Shawn Guo
• [PATCH v9 3/9] ARM: edma: add AM33XX support to the private EDMA API   Andy Shevchenko
• [PATCH 4/9] MXS/i.MX28: there is more than one way to clock the RTC   Shawn Guo
• [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.   Benoit Cousson
• [PATCH] clk:SPEAr1340: Correct parent clock configuration   Vipul Kumar Samar
• [PATCH] xen: arm: mandate EABI and use generic atomic operations.   Ian Campbell
• [PATCH LINUX v5] xen: event channel arrays are xen_ulong_t and not unsigned long   Ian Campbell
• [PATCH 00/23] RFC: exynos multiplatform support   Thierry Reding
• [PATCH v2 1/3] ARM: dts: imx6q: Add pinctrl for ecspi3   Shawn Guo
• [PATCH] ARM: OMAP1: fix omap_udc registration   Felipe Balbi
• [PATCH 01/16] ARM: b.L: secondary kernel entry code   Pavel Machek
• [PATCH] pinctrl: single: avoid to set read only object   Linus Walleij
• [PATCH 1/2] pinctrl: sunxi: Add Allwinner A10 pin functions   Linus Walleij
• [PATCH 02/14] MAINTAINERS: remove arch/arm/plat-nomadik/   Alessandro Rubini
• [PATCH 2/2] pinctrl: sunxi: Add Allwinner A13 pin functions   Linus Walleij
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Thomas Petazzoni
• [PATCH v2 1/3] pinctrl: exynos: add exynos5250 SoC specific data   Linus Walleij
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]   Peter Chen
• [PATCH 08/29] arm64: KVM: user space interface   Michael S. Tsirkin
• [PATCH] mmc: sdhci-s3c: let device core setup the default pin configuration   Linus Walleij
• [PATCH] spi: s3c64xx: let device core setup the default pin configuration   Linus Walleij
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   Joonsoo Kim
• [PATCH] mmc: dwmmc: let device core setup the default pin configuration   Linus Walleij
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Ivan Djelic
• [PATCH] ASoC: samsung: let device core setup the default pin configuration   Linus Walleij
• [PATCH 0/2] ARM: dts: Add default pin states for client nodes on Exynos4/5 platforms   Linus Walleij
• [PATCH 4/9] MXS/i.MX28: there is more than one way to clock the RTC   Steffen Trumtrar
• [PATCH 00/16] big.LITTLE low-level CPU and cluster power management   Pavel Machek
• [PATCH 01/16] ARM: b.L: secondary kernel entry code   Nicolas Pitre
• [PATCH 00/16] big.LITTLE low-level CPU and cluster power management   Nicolas Pitre
• [PATCH] dma: Remove erroneous __exit and __exit_p() references   Maxin B. John
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Russell King - ARM Linux
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Russell King - ARM Linux
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Andrew Lunn
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Mark Brown
• [PATCH] ARM: S3C24XX: drop "select MACH_N35"   Russell King - ARM Linux
• [PATCH 1/1] clk: tegra: Fix periph_clk_to_bit macro   Prashant Gaikwad
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   Nicolas Pitre
• RFC: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH 00/16] big.LITTLE low-level CPU and cluster power management   Pavel Machek
• [PATCH] dma: Remove erroneous __exit and __exit_p() references   Vinod Koul
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Felipe Balbi
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Felipe Balbi
• [PATCH 00/16] big.LITTLE low-level CPU and cluster power management   Nicolas Pitre
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Sekhar Nori
• [PATCH] ARM: sunxi: dt: Add support for the Miniand Mini X-plus   Alejandro Mery
• Video card photo Supply与您共享了相册。   Video card photo Supply
• v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]   Maxime Ripard
• [PATCH 2/4] arm: plat-orion: fix address decoding when > 4GB is used   Ezequiel Garcia
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• [PATCH 2/4] arm: plat-orion: fix address decoding when > 4GB is used   Thomas Petazzoni
• [kvmarm] [PATCH 09/29] arm64: KVM: system register handling   Alexander Graf
• [PATCH] dma: Remove erroneous __exit and __exit_p() references   Maxin B. John
• [kvmarm] [PATCH 04/29] arm64: KVM: system register definitions for 64bit guests   Alexander Graf
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   JoonSoo Kim
• [PATCH] dma: Remove erroneous __exit and __exit_p() references   Vinod Koul
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 03/10] ARM: tegra: get power management configurations for PMC from DT   Joseph Lo
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 04/10] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH] mmc: dwmmc: let device core setup the default pin configuration   Seungwon Jeon
• [BUG] ARM Architected timers appear broken in 3.9-rc1   Jon Medhurst (Tixy)
• [PATCH] ARM: S5PV210: Fix PL330 DMA controller clkdev entries   Kukjin Kim
• [PATCH v2 1/3] pinctrl: exynos: add exynos5250 SoC specific data   Kukjin Kim
• [PATCH 05/10] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH 06/10] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS: remove EXYNOS_DEV_SYSMMU entirely   Paul Bolle
• [PATCH 1/4] Device tree entry for Freescale TDM controller   Sandeep Singh
• [PATCH 2/4] Device Tree bindings for Freescale TDM controller   Sandeep Singh
• [PATCH 3/4] TDM Device Tree entries for various Freescale Platforms   Sandeep Singh
• [PATCH 4/4] Added device tree entries for Legerity SLIC node on various Freescale Platforms   Sandeep Singh
• [PATCH] ARM: EXYNOS: change HAVE_SAMSUNG_KEYPAD to KEYBOARD_SAMSUNG   Paul Bolle
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Russell King - ARM Linux
• [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Sergei Shtylyov
• [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Joachim Eastwood
• [PATCH 0/5] Device Bus support for Marvell EBU SoC   Ezequiel Garcia
• [PATCH 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH 2/5] ARM: mvebu: Add Device Bus support for Armada 370/XP SoC   Ezequiel Garcia
• [PATCH 3/5] ARM: mvebu: Add support for NOR flash device on Armada XP-GP board   Ezequiel Garcia
• [PATCH 4/5] ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board   Ezequiel Garcia
• [PATCH 5/5] ARM: mvebu: Update defconfig to select Device Bus (memory-controller) support   Ezequiel Garcia
• [PATCH 11/14] ARM: OMAP2+: Add device-tree support for NOR flash   Ezequiel Garcia
• doubt about where to put pin-mux in MX28 based platform DT   Maxime Ripard
• [PULL PATCH 0/3] ARM: at91: Kconfig cleanup for prepare add of Cortex-A5 Sama5   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: OMAP2+: am33xx: preserve JTAG clock aka debugss_ick.   Andreas Fenkart
• [PATCH v8 01/12] mfd: DT bindings for the palmas family MFD   Ian Lartey
• [PATCH v8 02/12] mfd: palmas: is_palmas_charger needed by multiple drivers   Ian Lartey
• [PATCH v8 03/12] mfd: palmas add variant and OTP detection   Ian Lartey
• [PATCH v8 04/12] regulator: palmas correct dt parsing   Ian Lartey
• [PATCH v8 05/12] watchdog: add Palmas Watchdog support   Ian Lartey
• [PATCH v8 06/12] watchdog: Kconfig for Palmas watchdog   Ian Lartey
• [PATCH v8 07/12] gpio: palmas: add in GPIO support for palmas charger   Ian Lartey
• [PATCH v8 08/12] gpio: palmas: Enable DT support for palmas gpio.   Ian Lartey
• [PATCH v8 09/12] leds: Add support for Palmas LEDs   Ian Lartey
• [PATCH v8 10/12] clk: Kconfig for Palmas clock driver   Ian Lartey
• [PATCH v8 11/12] leds: Kconfig for Palmas LEDs   Ian Lartey
• [PATCH v8 12/12] clk: add a clock driver for palmas   Ian Lartey
• [PATCH] ARM: OMAP2+: am33xx: preserve JTAG clock aka debugss_ick.   Bedia, Vaibhav
• [PATCH v8 0/12] Palmas Updates   Ian Lartey
• [PATCH] ARM: mm: clean-up in order to reduce to call kmap_high_get()   Russell King - ARM Linux
• [PATCH v2] ARM: OMAP1: fix omap_udc registration   Aaro Koskinen
• [PATCH 1/4] Device tree entry for Freescale TDM controller   Russell King - ARM Linux
• [PATCH v3 0/7] ARM: dts: omap: Add dts data for USB   Kishon Vijay Abraham I
• [PATCH v3 1/7] ARM: dts: omap: Add omap control usb data   Kishon Vijay Abraham I
• [PATCH v3 2/7] ARM: dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH v3 3/7] ARM: dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [PATCH v3 4/7] ARM: dts: omap5: Add omap control usb data   Kishon Vijay Abraham I
• [PATCH v3 5/7] ARM: dts: omap5: Add ocp2scp data   Kishon Vijay Abraham I
• [PATCH v3 6/7] ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH v3 7/7] ARM: dts: omap5: add dwc3 omap and dwc3 core dt data   Kishon Vijay Abraham I
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH v2] ARM: OMAP1: fix omap_udc registration   Felipe Balbi
• [PATCH 01/10] clocksource: add generic dummy timer driver   Thomas Gleixner
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [PATCH] xen: arm: mandate EABI and use generic atomic operations.   Konrad Rzeszutek Wilk
• [PATCH 1/3] ARM: at91: move non DT Kconfig to Kconfig.non_dt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: at91: rename board-dt to more specific name board-dt-sam9   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: at91: renamme rm9200 dt file   Jean-Christophe PLAGNIOL-VILLARD
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [PATCH 00/16] big.LITTLE low-level CPU and cluster power management   Pavel Machek
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [GIT PULL] preparation patches for Cortex-M3   Uwe Kleine-König
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Russell King - ARM Linux
• [BUG] ARM Architected timers appear broken in 3.9-rc1   Mark Rutland
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Sylwester Nawrocki
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Russell King - ARM Linux
• [PATCH] pinctrl: single: avoid to set read only object   Haojian Zhuang
• [PATCH 00/16] big.LITTLE low-level CPU and cluster power management   Nicolas Pitre
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Matt Porter
• [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.   Tony Lindgren
• 2013 Linux Plumbers PCI Microconference proposal call for participaton   Myron Stowe
• [BUG] ARM Architected timers appear broken in 3.9-rc1   Thomas Gleixner
• [PATCH] pinctrl: single: avoid to set read only object   Tony Lindgren
• [PATCH 0/5] Device Bus support for Marvell EBU SoC   Thomas Petazzoni
• [PATCH 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Thomas Petazzoni
• [PATCH 5/5] ARM: mvebu: Update defconfig to select Device Bus (memory-controller) support   Thomas Petazzoni
• [PATCH] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [BUG] ARM Architected timers appear broken in 3.9-rc1   Jon Medhurst (Tixy)
• [PATCH] ARM: sunxi: dt: Add support for the Miniand Mini X-plus   Maxime Ripard
• Question about fixed-clock   Afzal Mohammed
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• RFC: Zynq Clock Controller   Sören Brinkmann
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Christoffer Dall
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH] ARM: tegra: fix ignored return value of regulator_enable   Stephen Warren
• omap4 pandaboard: clock input for TiWi module inactive   Levi Pearson
• [PATCH 03/10] ARM: tegra: get power management configurations for PMC from DT   Stephen Warren
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• 3.9-rc1 regression in arm dtb build   Stephen Warren
• [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9] intoduce dmesg to print the barebox printk to dmesg ring buffer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] net/console: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] barebox_banner: switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Guennadi Liakhovetski
• [PATCH 01/11] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] intoduce dmesg to print the barebox printk to dmesg ring buffer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] net/console: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] barebox_banner: switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] net/phy: convert to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] ext4: switch debug and printf to dev_xxx   Jean-Christophe PLAGNIOL-VILLARD
• RFC: Zynq Clock Controller   Lars-Peter Clausen
• [PATCHv2] ARM: sunxi: dt: Add support for the PineRiver Mini X-plus   Maxime Ripard
• [PATCHv2 0/6] Extend UART support for Allwinner SoCs   Maxime Ripard
• [PATCH 1/6] serial: 8250_dw: add support for clocks property when using DeviceTree   Maxime Ripard
• [PATCH 2/6] ARM: sunxi: dt: Use clocks property instead of clock-frequency for the UARTs   Maxime Ripard
• [PATCH 3/6] ARM: sunxi: dt: Move uart0 to sun4i-a10.dtsi   Maxime Ripard
• [PATCH 4/6] ARM: sunxi: dt: Add uart3 dt node   Maxime Ripard
• [PATCH 5/6] ARM: sunxi: dt: Add A10 UARTs to the dtsi.   Maxime Ripard
• [PATCH 6/6] ARM: sunxi: hackberry: Add UART muxing   Maxime Ripard
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Ezequiel Garcia
• [PATCH 6/9] meminfo: switch to pr_xxx   Sergei Shtylyov
• [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Sergei Shtylyov
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• RFC: Zynq Clock Controller   Sören Brinkmann
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Greg Kroah-Hartman
• [PATCH] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource   Sergei Shtylyov
• [PATCH] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource   Kuninori Morimoto
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Rob Herring
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH 00/23] RFC: exynos multiplatform support   Tomasz Figa
• [PATCH] ARM: mm: clean-up in order to reduce to call kmap_high_get()   Joonsoo Kim
• [PATCH v5 01/16] spi/spi-atmel: fix master->num_chipselect wrongly set.   Yang, Wenyou
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Ezequiel Garcia
• [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Yang, Wenyou
• [PATCH v8 10/12] clk: Kconfig for Palmas clock driver   Kim, Milo
• [PATCH v8 11/12] leds: Kconfig for Palmas LEDs   Kim, Milo
• [PATCH v8 09/12] leds: Add support for Palmas LEDs   Kim, Milo
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Peter Chen
• [PATCH] mm: Fixup the condition whether the page cache is free   Simon Jeons
• [PATCH] mm: Fixup the condition whether the page cache is free   Johannes Weiner
• [PATCH] xen: arm: mandate EABI and use generic atomic operations.   Stefano Stabellini
• [PATCH] mm: Fixup the condition whether the page cache is free   Simon Jeons
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Marc Zyngier
• [PATCH] mm: Fixup the condition whether the page cache is free   Johannes Weiner
• [PATCH] ARM: mach-bcm: drop "select GENERIC_TIME"   Christian Daudt
• [kvmarm] [PATCH 04/29] arm64: KVM: system register definitions for 64bit guests   Marc Zyngier
• [kvmarm] [PATCH 09/29] arm64: KVM: system register handling   Marc Zyngier
• [kvmarm] [PATCH 08/29] arm64: KVM: user space interface   Marc Zyngier
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH 2/4][V2] time : set broadcast irq affinity   Daniel Lezcano
• [PATCH] clk:SPEAr1340: Correct parent clock configuration   Viresh Kumar
• [PATCH] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource   Simon Horman
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Guennadi Liakhovetski
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Peter Chen
• [PATCH v3 -next 0/5] Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH] ARM: proc: Add Krait proc info   Will Deacon
• [PATCH v2 1/3] pinctrl: exynos: add exynos5250 SoC specific data   Linus Walleij
• [PATCH v8 0/12] Palmas Updates   Linus Walleij
• RFC: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Felipe Balbi
• [PATCH 2/4][V2] time : set broadcast irq affinity   Thomas Gleixner
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Felipe Balbi
• [PATCH] ARM: imx: Add support for the Armadeus Systems APF51Dev docking board   Gwenhael Goavec-Merou
• [PATCH v3 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Mark Brown
• asm/types.h Header file wont get generated while building uImage ?   Prabhakar Lad
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state   Peter Chen
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 0/4] clocksource: Set initcall level to subsys   Simon Horman
• [PATCH 1/4] clocksource: sh_cmt: Set initcall level to subsys   Simon Horman
• [PATCH 2/4] clocksource: sh_tmu: Set initcall level to subsys   Simon Horman
• [PATCH 3/4] clocksource: em_sti: Set initcall level to subsys   Simon Horman
• [PATCH 4/4] clocksource: sh_mtu2: Set initcall level to subsys   Simon Horman
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Peter Chen
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Felipe Balbi
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Peter Chen
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control   Felipe Balbi
• [PATCH] rtc: at91rm9200: add DT support   Nicolas Ferre
• [PATCH 5/5] pcmcia: at91_cf: add support for DT   Nicolas Ferre
• [PATCH 0/5] pcmcia: at91_cf: clean up and add DT support   Nicolas Ferre
• [PATCH 0/5] at91: atmel_lcdfb: regression fixes and cpu_is removal   Nicolas Ferre
• [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Yang, Wenyou
• [PATCH v8 04/12] regulator: palmas correct dt parsing   Mark Brown
• [PATCH v2 4/6] ARM: davinci: da850: add DT node for eth0.   Prabhakar Lad
• [PATCH v2 4/6] ARM: davinci: da850: add DT node for eth0.   Sekhar Nori
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Paul Bolle
• [PATCH] ARM:kernel: beautify code: correct the tabs count for '}'   Chen Gang
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Marc Kleine-Budde
• [PATCH] ARM: EXYNOS: Use wfi macro in platform_do_lowpower   Tushar Behera
• [PATCH] ARM: Dove: add RTC device node   Jean-Francois Moine
• [PATCH] ARM: sunxi: cubieboard: Add UART muxing   Emilio López
• [PATCH v2 0/7] Enable CMT and TMU for DT   Bastian Hecht
• [PATCH v2 1/7] ARM: shmobile: Define DT bindings for timer devices   Bastian Hecht
• [PATCH v2 2/7] clocksource: sh_cmt: Add OF support   Bastian Hecht
• [PATCH v2 3/7] clocksource: sh_tmu: Add OF support   Bastian Hecht
• [PATCH v2 4/7] ARM: shmobile: sh73a0: Add timer DT names to clock list   Bastian Hecht
• [PATCH v2 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH v2 6/7] ARM: shmobile: r8a7740: Add DT name to clock list for CMT10   Bastian Hecht
• [PATCH v2 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Bastian Hecht
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Gleb Natapov
• [PATCHv2 0/6] Extend UART support for Allwinner SoCs   Emilio López
• [PATCH] ARM: OMAP: fix typo "CONFIG_SMC91x_MODULE"   Paul Bolle
• [PATCH 2/2] ARM: dts: add AM33XX MMC support   Hiremath, Vaibhav
• [PATCH] ARM: mach-bcm: drop "select GENERIC_TIME"   Paul Bolle
• [PATCH v11 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect   Peter Chen
• [PATCH 0/3] ARM: at91: fix hanged boot   Johan Hovold
• [PATCH 1/3] ARM: at91/rtc: fix boot after RTC wake-up   Johan Hovold
• [PATCH 2/3] Revert "arm: at91: move at91rm9200 rtc header in drivers/rtc"   Johan Hovold
• [PATCH 3/3] ARM: at91: fix hanged boot   Johan Hovold
• [PATCH 00/23] RFC: exynos multiplatform support   Arnd Bergmann
• [PATCH 07/12] mtd: gpmi: move to use generic DMA helper   Artem Bityutskiy
• [PATCH v2 6/6] ARM: davinci: da850: configure system configuration chip(CFGCHIP3) for emac   Prabhakar Lad
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [PATCH 0/5] ARM: DT: tegra114: Add DT entry for different controller   Laxman Dewangan
• [PATCH 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Laxman Dewangan
• [PATCH 2/5] ARM: DT: tegra114: Add i2c controller DT entry   Laxman Dewangan
• [PATCH 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Laxman Dewangan
• [PATCH 4/5] ARM: DT: tegra114: add KBC controller DT entry   Laxman Dewangan
• [PATCH 5/5] ARM: DT: tegra114: Add spi controller DT entry   Laxman Dewangan
• [PATCH] ARM: DT: tegra20/tegra30: Correct clock id for UARTB   Laxman Dewangan
• [PATCH 07/12] mtd: gpmi: move to use generic DMA helper   Arnd Bergmann
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• s3c24xx pinctrl help   Heiko Stübner
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Roger Quadros
• [PATCH 0/4] SAMA5D3 support   ludovic.desroches at atmel.com
• [PATCH 1/4] ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation   ludovic.desroches at atmel.com
• [PATCH 2/4] ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch   ludovic.desroches at atmel.com
• [PATCH 3/4] ARM: at91: fix infinite loop in at91_irq_suspend/resume   ludovic.desroches at atmel.com
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   ludovic.desroches at atmel.com
• [PATCH 3/4][V2] ARM: nomadik: add dynamic irq flag to the timer   Daniel Lezcano
• [PATCH] ARM: at91: add gpio suspend/resume support when using pinctrl   ludovic.desroches at atmel.com
• [PATCH v4 00/18] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCH v4 01/18] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCH v4 02/18] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
• [PATCH v4 03/18] of/pci: Add of_pci_get_bus() function   Thomas Petazzoni
• [PATCH v4 04/18] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
• [PATCH v4 05/18] pci: infrastructure to add drivers in drivers/pci/host   Thomas Petazzoni
• [PATCH v4 06/18] arm: pci: add a align_resource hook   Thomas Petazzoni
• [PATCH v4 07/18] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
• [PATCH v4 08/18] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
• [PATCH v4 09/18] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH v4 10/18] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
• [PATCH v4 11/18] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [PATCH v4 12/18] arm: mvebu: add PCIe Device Tree informations for Armada XP   Thomas Petazzoni
• [PATCH v4 13/18] arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4   Thomas Petazzoni
• [PATCH v4 14/18] arm: mvebu: PCIe Device Tree informations for Armada XP DB   Thomas Petazzoni
• [PATCH v4 15/18] arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox   Thomas Petazzoni
• [PATCH v4 16/18] arm: mvebu: PCIe Device Tree informations for Armada 370 DB   Thomas Petazzoni
• [PATCH v4 17/18] arm: mvebu: PCIe Device Tree informations for Armada XP GP   Thomas Petazzoni
• [PATCH v4 18/18] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
• [PATCH 4/4][V2] ARM: timer-sp: Set dynamic irq affinity   Daniel Lezcano
• [GIT PULL] Renesas ARM-based SoC fixes for v3.9   Simon Horman
• [PATCH] ARM: shmobile: marzen: Include mmc/host.h   Simon Horman
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Marc Kleine-Budde
• [PATCH] ARM: S3C64XX: Clear DMA flags on channel request   Charles Keepax
• [PATCH 2/4] ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: fix infinite loop in at91_irq_suspend/resume   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation   Marek Szyprowski
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Maxime Bizon
• [rtc-linux] [PATCH 3/3] ARM: at91: fix hanged boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4][V2] ARM: nomadik: add dynamic irq flag to the timer   Thomas Gleixner
• [PATCH 3/4] USB mxs-phy: use readl(), writel() instead of the _relaxed() versions   Marc Kleine-Budde
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Aaro Koskinen
• [PATCH 07/12] mtd: gpmi: move to use generic DMA helper   Huang Shijie
• [PATCH 3/4] USB mxs-phy: use readl(), writel() instead of the _relaxed() versions   Felipe Balbi
• [PATCH 1/5] USB chipidea: ci13xxx-imx: create dynamic platformdata   Felipe Balbi
• [PATCH 3/4] USB mxs-phy: use readl(), writel() instead of the _relaxed() versions   Marc Kleine-Budde
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Felipe Balbi
• [PATCH 5/5] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy   Felipe Balbi
• [PATCH 3/4] USB mxs-phy: use readl(), writel() instead of the _relaxed() versions   Felipe Balbi
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Tony Lindgren
• [PATCH 5/5] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy   Marc Kleine-Budde
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Joachim Eastwood
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Alexander Shishkin
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Cooper
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Marc Kleine-Budde
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Ludovic Desroches
• [PATCH V2 00/17] ARM: OMAP2+: GPMC clean-up and DT update   Jon Hunter
• [PATCH V2 01/17] ARM: OMAP2+: Simplify code configuring ONENAND devices   Jon Hunter
• [PATCH V2 02/17] ARM: OMAP2+: Add variable to store number of GPMC waitpins   Jon Hunter
• [PATCH V2 03/17] ARM: OMAP2+: Add structure for storing GPMC settings   Jon Hunter
• [PATCH V2 04/17] ARM: OMAP2+: Add function for configuring GPMC settings   Jon Hunter
• [PATCH V2 05/17] ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V2 06/17] ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V2 07/17] ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V2 08/17] ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V2 09/17] ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()   Jon Hunter
• [PATCH V2 10/17] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Jon Hunter
• [PATCH V2 11/17] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH V2 12/17] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• [PATCH V2 13/17] ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT   Jon Hunter
• [PATCH V2 14/17] ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT   Jon Hunter
• [PATCH V2 15/17] ARM: OMAP2+: Detect incorrectly aligned GPMC base address   Jon Hunter
• [PATCH V2 16/17] ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable   Jon Hunter
• [PATCH V2 17/17] ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails   Jon Hunter
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Ezequiel Garcia
• [PATCH v8 0/12] Palmas Updates   Ian Lartey
• [PATCH v8 11/12] leds: Kconfig for Palmas LEDs   Ian Lartey
• [PATCH v8 10/12] clk: Kconfig for Palmas clock driver   Ian Lartey
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Joachim Eastwood
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Paul Bolle
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Paul Bolle
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Jon Hunter
• [PATCH 1/9] ARM: OMAP2+: Prepare for device-tree PMU support   Jon Hunter
• [PATCH 2/9] ARM: dts: OMAP2+: Add PMU nodes   Jon Hunter
• [PATCH 3/9] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Jon Hunter
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Jon Hunter
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Jon Hunter
• [PATCH 6/9] ARM: dts: Add OMAP3430 SDP flash memory bindings   Jon Hunter
• [PATCH 7/9] ARM: dts: Add OMAP2 gpio bindings   Jon Hunter
• [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property   Jon Hunter
• [PATCH 9/9] ARM: dts: OMAP3: Add reg and interrupt properties for gpio   Jon Hunter
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 0/3] dt and pinctrl support for at91_can   ludovic.desroches at atmel.com
• [PATCH 1/3] can: at91_can: add dt support   ludovic.desroches at atmel.com
• [PATCH 2/3] can: at91_can: add pinctrl support   ludovic.desroches at atmel.com
• [PATCH 3/3] can: Kconfig: CAN_AT91 depends on ARCH_AT91   ludovic.desroches at atmel.com
• [PATCH 2/3] can: at91_can: add pinctrl support   Marc Kleine-Budde
• RFC: Zynq Clock Controller   Sören Brinkmann
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 1/3] can: at91_can: add dt support   Marc Kleine-Budde
• [PATCH 3/3] can: Kconfig: CAN_AT91 depends on ARCH_AT91   Marc Kleine-Budde
• [PATCH] ARM: DT: tegra20/tegra30: Correct clock id for UARTB   Stephen Warren
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Stephen Warren
• [PATCH 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Stephen Warren
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Tony Lindgren
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Ezequiel Garcia
• [PATCH 0/4] SAMA5D3 support   Robert Nelson
• [PATCH] ARM: DT: tegra20/tegra30: Correct clock id for UARTB   Laxman Dewangan
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Paul Bolle
• [PATCH 4/5] ARM: DT: tegra114: add KBC controller DT entry   Stephen Warren
• [PATCH 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Laxman Dewangan
• [PATCH 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Laxman Dewangan
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• RFC: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Tony Lindgren
• [PATCH 4/5] ARM: DT: tegra114: add KBC controller DT entry   Laxman Dewangan
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Stephen Warren
• [PATCH 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Stephen Warren
• [PATCH 4/5] ARM: DT: tegra114: add KBC controller DT entry   Stephen Warren
• [PATCH 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Laxman Dewangan
• [PATCH 2/3] can: at91_can: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Ezequiel Garcia
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Jean-Christophe PLAGNIOL-VILLARD
• s3c24xx pinctrl help   Tomasz Figa
• [PATCH] omap2: twl-common: Add default power configuration   Matthias Brugger
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Christoffer Dall
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH 04/10] ARM: OMAP2+: Divorce from local timer API   Tony Lindgren
• [PATCH 10/10] ARM: smp: Remove local timer API   Tony Lindgren
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Javier Martinez Canillas
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH] ARM: Dove: add RTC device node   Sergei Shtylyov
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Alexander Shishkin
• [PATCH v2] ARM: dove: drop "select COMMON_CLK_DOVE"   Jason Cooper
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Joachim Eastwood
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Jon Hunter
• [PATCH] arm: mvebu: enable the USB ports on Armada 370 Reference Design board   Jason Cooper
• [PATCH] ARM: Dove: add RTC device node   Jason Cooper
• [GIT PULL 3.9] Various fixes for Marvell EBU platforms   Jason Cooper
• [GIT PULL] ARM: mvebu: fixes for v3.9   Jason Cooper
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Arnd Bergmann
• [PATCH] ARM: Dove: add RTC device node   Arnd Bergmann
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Rob Herring
• [GIT PULL] preparation patches for Cortex-M3   Russell King - ARM Linux
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Russell King - ARM Linux
• [PATCH net-next] drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb   Joe Perches
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Javier Martinez Canillas
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Anil Kumar
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH V2 11/17] ARM: OMAP2+: Add device-tree support for NOR flash   Javier Martinez Canillas
• [PATCH] ARM: Dove: add RTC device node   Jason Cooper
• [PATCH 0/6] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCH 1/6] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH 3/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• [PATCH 4/6] arm: vt8500: Remove gpio devicetree nodes   Tony Prisk
• [PATCH 5/6] gpio: vt8500: Remove arch-vt8500 gpio driver   Tony Prisk
• [PATCH 6/6] arm: vt8500: Remove pinmux configuration from mach-vt8500/vt8500.c   Tony Prisk
• [PATCH] tty: serial: vt8500: Fix clock code in probe   Tony Prisk
• [PATCH] tty: serial: vt8500: Unneccessary duplicated clock code removed   Tony Prisk
• [PATCH] mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO   Axel Lin
• [GIT PULL 3.9] Various fixes for Marvell EBU platforms   Thomas Petazzoni
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH] ARM: imx51: Add pinctrl for ecspi2   Gwenhael Goavec-Merou
• [PATCH 0/5] ARM: S3C24XX: more fixes and enhancements for the s3c24xx irqs   Kukjin Kim
• [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms   Kukjin Kim
• [PATCH v3 0/4] Initial Device Tree support for S3C64xx   Kukjin Kim
• [PATCH v8 3/7] ARM: davinci: Add support for configuring DA8XX_REMOTEPROC   Sergei Shtylyov
• [PATCH v2] mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO   Axel Lin
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Viresh Kumar
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Ezequiel Garcia
• s3c24xx pinctrl help   Heiko Stübner
• s3c24xx pinctrl help   Tomasz Figa
• s3c24xx pinctrl help   Tomasz Figa
• s3c24xx pinctrl help   Tomasz Figa
• [PATCH v2] ARM: imx51: Add pinctrl for ecspi2   Gwenhael Goavec-Merou
• s3c24xx pinctrl help   Heiko Stübner
• [PATCH] ARM: imx51: Add a second pinctrl group for i2c2   Gwenhael Goavec-Merou
• [PATCH 8/9] iommu: OMAP: build only on OMAP2+   Joerg Roedel
• [PATCH V2 0/5] ARM: DT: tegra114: Add DT entry for different controller   Laxman Dewangan
• [PATCH V2 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Laxman Dewangan
• [PATCH V2 2/5] ARM: DT: tegra114: Add i2c controller DT entry   Laxman Dewangan
• [PATCH V2 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Laxman Dewangan
• [PATCH V2 4/5] ARM: DT: tegra114: add KBC controller DT entry   Laxman Dewangan
• [PATCH V2 5/5] ARM: DT: tegra114: Add spi controller DT entry   Laxman Dewangan
• [PATCH] ARM: S3C24XX: drop "select MACH_NEO1973"   Paul Bolle
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Paul Bolle
• [PATCH] of: Add missing node iteration stubs for !CONFIG_OF   Tomasz Figa
• [PATCH] of: Add missing node iteration stubs for !CONFIG_OF   Tomasz Figa
• [PATCH] of: Add missing node iteration stubs for disabled CONFIG_OF   Tomasz Figa
• [PATCH v3 00/12] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v3 01/12] ARM: SAMSUNG: Move samsung-time to drivers/clocksource   Tomasz Figa
• [PATCH v3 02/12] clocksource: samsung-time: Set platform-specific parameters at runtime   Tomasz Figa
• [PATCH v3 03/12] clocksource: samsung-time: Drop useless defines from public header   Tomasz Figa
• [PATCH v3 04/12] ARM: SAMSUNG: Move samsung-time.h header to inlude/clocksource   Tomasz Figa
• [PATCH v3 05/12] clocksource: samsung-time: Use local register definitions   Tomasz Figa
• [PATCH v3 06/12] clocksource: samsung-time: Remove use of static register mapping   Tomasz Figa
• [PATCH v3 07/12] clocksource: samsung-time: Use clk_get_sys for getting clocks   Tomasz Figa
• [PATCH v3 08/12] ARM: SAMSUNG: devs: Drop unnecessary IRQ resources of timer devices   Tomasz Figa
• [PATCH v3 09/12] clocksource: samsung-time: Do not use static IRQ definition   Tomasz Figa
• [PATCH v3 10/12] clocksource: samsung-time: Move IRQ mask/ack handling to the driver   Tomasz Figa
• [PATCH v3 11/12] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code   Tomasz Figa
• [PATCH v3 12/12] clocksource: samsung-time: Add Device Tree support   Tomasz Figa
• [PATCH v4 0/4] Initial Device Tree support for S3C64xx   Tomasz Figa
• [PATCH v4 1/4] ARM: common: vic: Parse interrupt and resume masks from device tree   Tomasz Figa
• [PATCH v4 2/4] ARM: s3c64xx: Add board file for boot using Device Tree   Tomasz Figa
• [PATCH v4 3/4] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs   Tomasz Figa
• [PATCH v4 4/4] ARM: dts: Add dts file for S3C6410-based Mini6410 board   Tomasz Figa
• [GIT PULL] preparation patches for Cortex-M3   Uwe Kleine-König
• [PATCH net-next] drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb   David Miller
• memory leak and other oddness in pinctrl-mvebu.c   Jason Cooper
• [PATCH] ARM: OMAP3: hwmod data: disable MIDLEMODE control for musb   Grazvydas Ignotas
• [PATCH] ARM:kernel: beautify code, rel->r_offset is __u32 which never < 0   Chen Gang
• [PATCH] ARM:kernel: beautify code, using 'static const' instead of 'const static'   Chen Gang
• [PATCH] ARM:net: an issue for k which is u32, never < 0   Chen Gang
• [PATCH] ARM:vexpress: beautify code, using 'static const' instead of 'const static'   Chen Gang
• [PATCH] ARM: fix the magic numbers used for checking the existence of saved caller registers   Tao Hou
• [PATCH] ARM:vexpress: beautify code, using 'static const' instead of 'const static'   Viresh Kumar
• [PATCH] ARM:vexpress: beautify code, using 'static const' instead of 'const static'   Chen Gang
• [PATCH] drivers/clk: fixup commit 72480014b86c8b51fb51c5c6a0525876055c37c7   Chen Gang
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH v2, part1 03/29] mm/ARM: use common help functions to free reserved pages   Jiang Liu
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH v2, part2 02/10] mm/ARM: use free_highmem_page() to free highmem pages into buddy system   Jiang Liu
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   Herbert Xu
• [kvmarm] [PATCH 08/29] arm64: KVM: user space interface   Michael S. Tsirkin
• [PATCH 1/4 v4] ARM: AT91SAM9G45: same platform data structure for all crypto peripherals   Herbert Xu
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Francesco Lavra
• [PATCH v2 0/3] clock driver for sunxi   Maxime Ripard
• [PATCH] topology: removed kzalloc return value cast   Mihai Stirbat
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Felipe Balbi
• [PATCH 5/5] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy   Felipe Balbi
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Francesco Lavra
• [PATCH 0/2] ARM: imx: kconfig changes for cpufreq-cpu0   Markus Pargmann
• [PATCH 1/2] ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0   Markus Pargmann
• [PATCH 2/2] ARM: imx: Disable imx-cpufreq when cpufreq-cpu0 used   Markus Pargmann
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Alexander Holler
• [PATCH 1/1] ARM: OMAP: gpmc: request CS address space for ethernet chips   Javier Martinez Canillas
• Multi-platform, and secure-only ARM errata workarounds   Santosh Shilimkar
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Russell King - ARM Linux
• [PATCH 0/4] time: dynamic irq affinity   Santosh Shilimkar
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Alexander Holler
• [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default   Santosh Shilimkar
• [PATCH 0/4] time: dynamic irq affinity   Daniel Lezcano
• [PATCH 00/10] ASoC: imx sound: Add DT support   Markus Pargmann
• [PATCH 01/10] imx-ssi: Fix AC97 rates   Markus Pargmann
• [PATCH 02/10] imx-ssi: Fix occasional AC97 reset failure   Markus Pargmann
• [PATCH 03/10] mx-ssi: flush fifos   Markus Pargmann
• [PATCH 04/10] ASoC: Kconfig: imx-ssi needs imx-fiq and imx-dma   Markus Pargmann
• [PATCH 05/10] ASoC: pcm030 audio fabric: remove __init from probe   Markus Pargmann
• [PATCH 06/10] ARM: soc-audio phycore-ac97: fix driver init order   Markus Pargmann
• [PATCH 07/10] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Markus Pargmann
• [PATCH 09/10] ASoC: imx-pcm-dma: Add support for DMA init by device node   Markus Pargmann
• [PATCH 10/10] ASoC: imx-ssi: Add imx27 and pca100 DT support   Markus Pargmann
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Nicolas Pitre
• [PATCH 01/10] imx-ssi: Fix AC97 rates   Fabio Estevam
• Multi-platform, and secure-only ARM errata workarounds   Olof Johansson
• Re: [PATCH 10/10] ASoC: imx-ssi: Add imx27 and pca100 DT support   Alexander Shiyan
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Nicolas Pitre
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Ivan Djelic
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH] ARM:net: an issue for k which is u32, never < 0   David Miller
• LVDS (LDB) driver for i.MX53 IPU   Sascha Hauer
• [PATCH V2 1/5] ARM: DT: tegra114: add APB DMA controller DT entry   Thierry Reding
• [PATCH V2 2/5] ARM: DT: tegra114: Add i2c controller DT entry   Thierry Reding
• [PATCH V2 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Thierry Reding
• [PATCH V2 5/5] ARM: DT: tegra114: Add spi controller DT entry   Thierry Reding
• [PATCH 2/2] ARM: imx: Disable imx-cpufreq when cpufreq-cpu0 used   Sascha Hauer
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   Sascha Hauer
• [PATCH] ARM: OMAP3: hwmod data: disable MIDLEMODE control for musb   Paul Walmsley
• [PATCH v2 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT   Kuninori Morimoto
• OMAP4 PM bootloader dependency problems   Paul Walmsley
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   Herbert Xu
• [PATCH] ARM:kernel: beautify code, using 'static const' instead of 'const static'   Rob Herring
• [PATCH] ARM: S3C64XX: Slow down mic detection rate for wm5102   Kukjin Kim
• [PATCH 1/5] ARM: dts: exynos5250-arndale: Add node entry for gpio-buttons   Kukjin Kim
• [PATCH 2/5] ARM: dts: exynos5250-arndale: Add PMIC node entry   Kukjin Kim
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Anil Kumar
• [PATCH] ARM: imx: pll1_sys should be an initial on clk   Shawn Guo
• [PATCH 07/12] mtd: gpmi: move to use generic DMA helper   Shawn Guo
• [PATCH 0/4] time: dynamic irq affinity   Santosh Shilimkar
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   amit kachhap
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   amit kachhap
• [PATCH V3 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   amit kachhap
• [PATCH] ARM: imx: Add support for the Armadeus Systems APF51Dev docking board   Shawn Guo
• [PATCH v2] ARM: imx51: Add pinctrl for ecspi2   Shawn Guo
• [PATCH] ARM: imx51: Add a second pinctrl group for i2c2   Shawn Guo
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Nicolas Pitre
• [PATCH] ARM:net: an issue for k which is u32, never < 0   Chen Gang
• [PATCH] ARM:kernel: beautify code, using 'static const' instead of 'const static'   Chen Gang
• 3.9-rc1 regression in arm dtb build   Olof Johansson
• [PATCH 0/8] memory: emif: miscellaneous bug fixes for EMIF driver   Lokesh Vutla
• [PATCH 1/8] memory: emif: Correct the lpmode timeout calculation   Lokesh Vutla
• [PATCH 2/8] memory: emif: setup LP settings on freq update   Lokesh Vutla
• [PATCH 3/8] memory: emif: handle overflow for timing for LP mode   Lokesh Vutla
• [PATCH 4/8] memory: emif: Handle devices which are not rated for >85C   Lokesh Vutla
• [PATCH 5/8] memory: emif: use restart if power_off not present when out of spec   Lokesh Vutla
• [PATCH 6/8] memory: emif: fix timings initialization issue   Lokesh Vutla
• [PATCH 7/8] memory: emif: errata i743: Prohibit usage of Power-Down mode   Lokesh Vutla
• [PATCH 8/8] memory: emif: Load the correct custom config values from dt   Lokesh Vutla
• [PATCH 1/8] memory: emif: Correct the lpmode timeout calculation   Santosh Shilimkar
• [PATCH 2/8] memory: emif: setup LP settings on freq update   Santosh Shilimkar
• [PATCH 3/8] memory: emif: handle overflow for timing for LP mode   Santosh Shilimkar
• [PATCH 4/8] memory: emif: Handle devices which are not rated for >85C   Santosh Shilimkar
• [PATCH 5/8] memory: emif: use restart if power_off not present when out of spec   Santosh Shilimkar
• [PATCH 6/8] memory: emif: fix timings initialization issue   Santosh Shilimkar
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 7/8] memory: emif: errata i743: Prohibit usage of Power-Down mode   Santosh Shilimkar
• [PATCH 8/8] memory: emif: Load the correct custom config values from dt   Santosh Shilimkar
• [PATCH 2/2] ARM: imx: Disable imx-cpufreq when cpufreq-cpu0 used   Shawn Guo
• [PATCH v3] arm: plat-samsung: check processor type before cache restoration in resume   Kukjin Kim
• [PATCH] ARM: S3C24XX: drop "select MACH_NEO1973"   Kukjin Kim
• [PATCH 07/12] mtd: gpmi: move to use generic DMA helper   Artem Bityutskiy
• [PATCH] watchdog: convert to devm_ioremap_resource()   Silviu-Mihai Popescu
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   Sascha Hauer
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH v3 1/2] i.MX27: Add clock support for SAHARA2.   javier Martin
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Roger Quadros
• [PATCH 0/4] time: dynamic irq affinity   Daniel Lezcano
• [PATCH v2 1/4] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• omap4 pandaboard: clock input for TiWi module inactive   Roger Quadros
• [PATCH 0/4] time: dynamic irq affinity   Santosh Shilimkar
• [PATCH 1/3] can: at91_can: add dt support   Ludovic Desroches
• [PATCH 3/3] can: Kconfig: CAN_AT91 depends on ARCH_AT91   Ludovic Desroches
• [PATCH v6 09/10] clk: tegra: Implement clocks for Tegra114   Peter De Schrijver
• [PATCH 0/4] time: dynamic irq affinity   Rickard Andersson
• [PATCH 1/5] ARM: dts: exynos5250-arndale: Add node entry for gpio-buttons   Tushar Behera
• omap4 pandaboard: clock input for TiWi module inactive   Peter Ujfalusi
• [PATCH 3/3] can: Kconfig: CAN_AT91 depends on ARCH_AT91   Marc Kleine-Budde
• [PATCH] ARM: dts: omap2plus: remove interrupt-parent property   Vishwanathrao Badarkhe, Manish
• [rtc-linux] [PATCH 3/3] ARM: at91: fix hanged boot   Johan Hovold
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Marc Zyngier
• [PATCH] watchdog: convert to devm_ioremap_resource()   Sachin Kamat
• [PATCH v2 2/2] video: imxfb: Add DT support   Mark Rutland
• [PATCH 0/4] time: dynamic irq affinity   Santosh Shilimkar
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Marc Zyngier
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• [PATCH 1/2] ARM: EXYNOS: enable all secondary cores for exynos5440   Amit Daniel Kachhap
• [PATCH 2/2] ARM: EXYNOS: Support CPU hotplug for exynos5440   Amit Daniel Kachhap
• 3.9-rc1 regression in arm dtb build   Grant Likely
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Gleb Natapov
• [rtc-linux] [PATCH 3/3] ARM: at91: fix hanged boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: OMAP4: PM: Avoid expensive cpu_suspend() path for all CPU power states except off   Santosh Shilimkar
• [PATCH 06/10] ARM: soc-audio phycore-ac97: fix driver init order   Mark Brown
• [PATCH 7/8] memory: emif: errata i743: Prohibit usage of Power-Down mode   Lokesh Vutla
• [PATCH 0/4] SAMA5D3 support   Ludovic Desroches
• [PATCH] ARM: at91: change name template in AT91_SOC_START macro   ludovic.desroches at atmel.com
• [PATCH v2 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH v4 0/2] Uncompress debug for multiplatform   Shawn Guo
• [PATCH v4 1/2] ARM: use Kconfig to select uncompress.h   Shawn Guo
• [PATCH v4 2/2] ARM: uncompress debug support for multiplatform build   Shawn Guo
• [PATCH v2 3/7] clocksource: sh_tmu: Add OF support   Bastian Hecht
• [PATCH v8 3/7] ARM: davinci: Add support for configuring DA8XX_REMOTEPROC   Sekhar Nori
• [PATCH] ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight   Peter Ujfalusi
• [PATCH] ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight   Tomi Valkeinen
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: tegra: fuse: export chip id and revision   Danny Huang
• [PATCH v6 12/16] spi/spi-atmel: add pinctrl support for atmel spi   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Paul Bolle
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Sergei Shtylyov
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Shawn Guo
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Paul Bolle
• [PATCH] ARM:vexpress: beautify code, using 'static const' instead of 'const static'   Pawel Moll
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Fabio Estevam
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Paul Bolle
• [Resend/PATCH 0/5] omap4/5: i2c/spi: device tree data   Sourav Poddar
• [Resend/PATCH 1/5] arm: dts: omap4-sdp: Add I2c pinctrl data   Sourav Poddar
• [Resend/PATCH 2/5] arm: dts: omap5-evm: Add I2c pinctrl data   Sourav Poddar
• [PATCH] clocksource: add empty version of clocksource_of_init   Rob Herring
• [Resend/PATCH 3/5] arm: dts: omap4-panda: Add I2c pinctrl data   Sourav Poddar
• [Resend/PATCH 4/5] arm: dts: omap5: add SPI devices to OMAP5 DeviceTree file   Sourav Poddar
• [Resend/PATCH 5/5] arm: dts: omap5-evm: Add mcspi data   Sourav Poddar
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Paul Bolle
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Fabio Estevam
• [PATCH] arm: tegra: fuse: export chip id and revision   Shawn Guo
• [PATCH 1/2] arm: at91: dt: at91sam9x5: correct NAND pins comments   Richard Genoud
• [PATCH 2/2] arm: at91: dt: at91sam9x5: complete NAND pinctrl   Richard Genoud
• [PATCH -next] ARM: EXYNOS: remove duplicated include from common.c   Wei Yongjun
• [GIT PULL] imx fixes for 3.9, take 2   Shawn Guo
• [PATCH -next] pinctrl: sirf: using for_each_set_bit to simplify the code   Wei Yongjun
• [GIT PULL] mxs fixes for 3.9, take 2   Shawn Guo
• [Resend/PATCH 0/5] omap4/5: i2c/spi: device tree data   Benoit Cousson
• [PATCH -next] mmc: wmt-sdmmc: remove unused variable in wmt_complete_data_request()   Wei Yongjun
• [GIT PULL] Device Tree fixes for v3.9   Arnd Bergmann
• [PATCH 1/2] arm: at91: dt: at91sam9x5: correct NAND pins comments   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] Device Tree fixes for v3.9   Samuel Ortiz
• [PATCH] ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"   Paul Bolle
• [PATCH 0/4] SAMA5D3 support   Robert Nelson
• [PATCH v8 3/7] ARM: davinci: Add support for configuring DA8XX_REMOTEPROC   Paul Bolle
• [PATCH 1/3] can: at91_can: add dt support   Marc Kleine-Budde
• [PATCH v8 09/12] leds: Add support for Palmas LEDs   Ian Lartey
• [GIT PULL] Device Tree fixes for v3.9   Arnd Bergmann
• [PATCH v3] clk: Add axi-clkgen driver   Lars-Peter Clausen
• [PATCH 04/10] ARM: OMAP2+: Divorce from local timer API   Santosh Shilimkar
• Dead mappings and drivers in MTD   Artem Bityutskiy
• [PATCH 1/3] can: at91_can: add dt support   Ludovic Desroches
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Simon Guinot
• [Resend/PATCH 0/5] omap4/5: i2c/spi: device tree data   Sourav Poddar
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Marc Kleine-Budde
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Marc Kleine-Budde
• [PATCH] clk: prima2: fix return value check in sirfsoc_of_clk_init()   Wei Yongjun
• [PATCH 02/13] USB: phy: nop: Defer probe if device needs VCC/RESET   Marc Kleine-Budde
• [kvmarm] [GIT PULL v2] KVM/ARM Fixes for 3.9-rc1   Christoffer Dall
• [PATCH 1/3] can: at91_can: add dt support   Marc Kleine-Budde
• Dead mappings and drivers in MTD   Olof Johansson
• [PATCH 4/4][V2] ARM: timer-sp: Set dynamic irq affinity   Russell King - ARM Linux
• [PATCH 4/9] mfd: max8925: fix trivial build warning for non-dt   Arnd Bergmann
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Tony Lindgren
• [PATCH 1/6] arm: vt8500: Increase available GPIOs on arch-vt8500   Russell King - ARM Linux
• [PATCH] ARM: multiplatform: Sort the max gpio numbers.   Russell King - ARM Linux
• [PATCH] ARM: OMAP3: hwmod data: disable MIDLEMODE control for musb   Grazvydas Ignotas
• Dead mappings and drivers in MTD   Artem Bityutskiy
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH 3/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Stephen Warren
• [PATCH] ARM:net: an issue for k which is u32, never < 0   Russell King - ARM Linux
• [PATCH] ARM: OMAP3: hwmod data: disable MIDLEMODE control for musb   Paul Walmsley
• [PATCH] ARM:net: an issue for k which is u32, never < 0   Mircea Gherzan
• Multi-platform, and secure-only ARM errata workarounds   Stephen Warren
• [PATCH 2/2] ARM: dts: add pin state information in client nodes for Exynos5 platforms   Doug Anderson
• [PATCH v4 0/2] Uncompress debug for multiplatform   Russell King - ARM Linux
• [PATCH] arm: tegra: fuse: export chip id and revision   Stephen Warren
• [PATCH] arm: tegra: fuse: export chip id and revision   Russell King - ARM Linux
• [PATCH 1/1] ARM: OMAP: gpmc: request CS address space for ethernet chips   Jon Hunter
• [PATCH v2 1/2] can: at91_can: add dt support   ludovic.desroches at atmel.com
• [PATCH v2 2/2] can: Kconfig: CAN_AT91 depends on ARM   ludovic.desroches at atmel.com
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH v4 0/2] Uncompress debug for multiplatform   Stephen Warren
• [PATCH v2 1/2] can: at91_can: add dt support   Marc Kleine-Budde
• [PATCH V2 2/5] ARM: DT: tegra114: Add i2c controller DT entry   Stephen Warren
• [PATCH] spi: s3c64xx: let device core setup the default pin configuration   Doug Anderson
• [PATCH v4 2/2] ARM: uncompress debug support for multiplatform build   Tony Lindgren
• [PATCH V2 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Stephen Warren
• [PATCH V2 2/5] ARM: DT: tegra114: Add i2c controller DT entry   Stephen Warren
• [PATCH V2 3/5] ARM: DT: tegra114:add aliases and DMA requestor for serial controller   Stephen Warren
• [PATCH V2 4/5] ARM: DT: tegra114: add KBC controller DT entry   Stephen Warren
• [PATCH] mmc: dwmmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Jon Hunter
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Jon Hunter
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Jon Hunter
• [PATCH 1/1] ARM: OMAP: gpmc: request CS address space for ethernet chips   Javier Martinez Canillas
• [PATCH V2 4/5] ARM: DT: tegra114: add KBC controller DT entry   Laxman Dewangan
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [rtc-linux] [PATCH 3/3] ARM: at91: fix hanged boot   Johan Hovold
• [PATCH v2 0/5] ARM: at91: fix hanged boot   Johan Hovold
• [PATCH v2 1/5] ARM: at91/rtc: fix boot after RTC wake-up   Johan Hovold
• [PATCH v2 2/5] ARM: at91/dts: add RTC nodes   Johan Hovold
• [PATCH v2 3/5] ARM: at91/dts: add RTT nodes   Johan Hovold
• [PATCH v2 4/5] Revert "arm: at91: move at91rm9200 rtc header in drivers/rtc"   Johan Hovold
• [PATCH v2 5/5] ARM: at91: fix hanged boot   Johan Hovold
• [PATCH 1/1] ARM: OMAP: gpmc: request CS address space for ethernet chips   Jon Hunter
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 1/1] ARM: OMAP: gpmc: request CS address space for ethernet chips   Javier Martinez Canillas
• [PATCH 2/2] ARM: imx: Disable imx-cpufreq when cpufreq-cpu0 used   Markus Pargmann
• [PATCH V2 4/5] ARM: DT: tegra114: add KBC controller DT entry   Stephen Warren
• Multi-platform, and secure-only ARM errata workarounds   Jason Gunthorpe
• [PATCH v2 2/2] video: imxfb: Add DT support   Markus Pargmann
• [RFC PATCH 0/8] A V4L2 driver for Exynos4x12 Imaging Subsystem   Sylwester Nawrocki
• [RFC PATCH 1/8] s5p-fimc: Add Exynos4x12 FIMC-IS driver   Sylwester Nawrocki
• [RFC PATCH 2/8] s5p-fimc: Add FIMC-IS ISP I2C bus driver   Sylwester Nawrocki
• [RFC PATCH 3/8] s5p-fimc: Add FIMC-IS parameter region definitions   Sylwester Nawrocki
• [RFC PATCH 4/8] s5p-fimc: Add common FIMC-IS image sensor driver   Sylwester Nawrocki
• [RFC PATCH 5/8] s5p-fimc: Add ISP video capture driver stubs   Sylwester Nawrocki
• [RFC PATCH 6/8] fimc-is: Add Exynos4x12 FIMC-IS device tree bindings documentation   Sylwester Nawrocki
• [RFC PATCH 7/8] s5p-fimc: Add fimc-is subdevs registration   Sylwester Nawrocki
• [RFC PATCH 8/8] s5p-fimc: Create media links for the FIMC-IS entities   Sylwester Nawrocki
• [PATCH] ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb   Grazvydas Ignotas
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 01/10] imx-ssi: Fix AC97 rates   Markus Pargmann
• [PATCH 06/10] ARM: soc-audio phycore-ac97: fix driver init order   Markus Pargmann
• [GIT PULL] clocksource cleanup for 3.10   Rob Herring
• [PATCH v8 3/7] ARM: davinci: Add support for configuring DA8XX_REMOTEPROC   Tivy, Robert
• Regulator API ignored return values   Arnd Bergmann
• [GIT PULL] ARM: tegra: DT-related fixes needed by the MMC tree   Stephen Warren
• [PATCH] mmc: tegra: use mmc_of_parse to get the support of standard MMC DT bindings   Stephen Warren
• Regulator API ignored return values   Stephen Warren
• [PATCH] ARM: multiplatform: Sort the max gpio numbers.   Arnd Bergmann
• [PATCH 05/10] ARM: dt: tegra: add bindings of power management configurations for PMC   Stephen Warren
• [GIT PULL] mxs fixes for 3.9, take 2   Arnd Bergmann
• [GIT PULL] imx fixes for 3.9, take 2   Arnd Bergmann
• [GIT PULL] ARM: mvebu: fixes for v3.9   Arnd Bergmann
• [PATCH 2/4][V2] time : set broadcast irq affinity   Arnd Bergmann
• [PATCH 1/2] ARM: exynos: pl330: Add #dma-cells for generic dma binding support   Arnd Bergmann
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Thomas Gleixner
• [GIT PULL] ARM: CSR: minor fixes for 3.9-rc1   Arnd Bergmann
• [PATCH RFC] clk: divider: Tolerate 0 divider for one based dividers   Soren Brinkmann
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• Regulator API ignored return values   Chris Ball
• [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error   Arnd Bergmann
• [PATCH V2 0/5] ARM: DT: tegra114: Add DT entry for different controller   Stephen Warren
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH REPOST] i2c: tegra: assume CONFIG_OF, remove platform data   Stephen Warren
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Laurent Pinchart
• [PATCH 9/9] ARM: spear3xx: Use correct pl080 header file   Arnd Bergmann
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH 1/2] w1: mxc_w1: Convert to devm_ioremap_resource()   Fabio Estevam
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_W1_MASTER_MXC   Fabio Estevam
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 0/4] clk: samsung: small fixes and enhancements   Heiko Stübner
• [PATCH 1/4] clk: samsung: register clk_div_tables for divider clocks   Heiko Stübner
• [PATCH 2/4] clk: samsung: remove np check in clock init   Heiko Stübner
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Heiko Stübner
• [PATCH 4/4] clk: samsung: add infrastructure to add separate aliases   Heiko Stübner
• [PATCH] ARM:net: an issue for k which is u32, never < 0   Chen Gang
• [PATCH] ARM:net: an issue for k which is u32, never < 0   Chen Gang
• [PATCH 0/7] ARM: S3C24XX: Convert S3C2416 to common clock framework   Heiko Stübner
• [PATCH 1/7] clk: samsung: add plls used in s3c2416 and s3c2443   Heiko Stübner
• [PATCH 2/7] ARM: S3C24XX: add soc_is_s3c2416 and soc_is_s3c2443   Heiko Stübner
• [PATCH 3/7] ARM: S3C24XX: enable legacy clock code only when SAMSUNG_CLOCK selected   Heiko Stübner
• [PATCH 4/7] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450   Heiko Stübner
• [PATCH 5/7] DO_NOT_APPLY: add clock driver for Samsung pwm clocks   Heiko Stübner
• [PATCH 6/7] ARM: SAMSUNG: use clk_prepare_enable in samsung-time   Heiko Stübner
• [PATCH 7/7] DO_NOT_APPLY: convert s3c2416 to use the common clock framework   Heiko Stübner
• [PATCH 9/9] ARM: spear3xx: Use correct pl080 header file   Viresh Kumar
• [PATCH v6 12/16] spi/spi-atmel: add pinctrl support for atmel spi   Yang, Wenyou
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH v8 3/7] ARM: davinci: Add support for configuringDA8XX_REMOTEPROC   cstsai
• [GIT PULL] ARM: CSR: minor fixes for 3.9-rc1   Barry Song
• [PATCH] clk: prima2: fix return value check in sirfsoc_of_clk_init()   Barry Song
• [PATCH 0/3] ARM sched_clock selection enhancements   Rob Herring
• [PATCH 1/3] ARM: sched_clock: allow changing to higher frequency counter   Rob Herring
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Rob Herring
• [PATCH 3/3] ARM: arch_timer: use the 64-bit sched_clock setup   Rob Herring
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Kumar, Anil
• [PATCH] mm: Fixup the condition whether the page cache is free   Simon Jeons
• linux-next: manual merge of the akpm tree with the arm-soc tree   Stephen Rothwell
• [PATCH 2/2] ARM: bcm2835: defconfig update   Stephen Warren
• [PATCH 1/2] ARM: bcm2835: add SPI device to DT   Stephen Warren
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH V2 1/9] gpio: tegra: add gpio wakeup source handling   Joseph Lo
• [PATCH V2 2/9] ARM: tegra: irq: add wake up handling   Joseph Lo
• [PATCH V2 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH v4 0/2] Uncompress debug for multiplatform   Shawn Guo
• [PATCH V2 4/9] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH V2 5/9] ARM: dts: tegra: add power gpio keys to DT   Joseph Lo
• [PATCH V2 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC   Joseph Lo
• [PATCH V2 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH -next] mmc: wmt-sdmmc: remove unused variable in wmt_complete_data_request()   Tony Prisk
• [PATCH V2 8/9] ARM: tegra: config: defconfig update   Joseph Lo
• [PATCH 1/6] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCH V2 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH 3/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• FW: Regulator API ignored return values   Kevin Liu
• [Bulk] Re: [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH 01/18] arm: remove cast for kzalloc return value   Zhang Yanfei
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC and APE6EVM board support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: APE6EVM support   Magnus Damm
• [PATCH] ARM: ux500: Remove duplicate ux500_l2x0_unlock function   Steve zhan
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Stephen Warren
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC and APE6EVM board support   Kuninori Morimoto
• [PATCH] ARM: ux500: Remove duplicate ux500_l2x0_unlock function   Srinidhi Kasagar
• linux-next: manual merge of the akpm tree with the arm-soc tree   Andrew Lunn
• [PATCH v9 3/9] ARM: edma: add AM33XX support to the private EDMA API   Sekhar Nori
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Sekhar Nori
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH v2 1/2] can: at91_can: add dt support   Ludovic Desroches
• [PATCH 04/04] ARM: shmobile: APE6EVM support   Kuninori Morimoto
• [PATCH 04/04] ARM: shmobile: APE6EVM support   Magnus Damm
• [PATCH] mach_omap2: use PTR_RET instead of IS_ERR + PTR_ERR   Silviu-Mihai Popescu
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Shawn Guo
• [PATCH v3 0/5] Enable SPI flash support on da850-evm DT kernel   Manjunathappa, Prakash
• [PATCH v3 1/5] spi/davinci: no wildcards in DT compatible property   Manjunathappa, Prakash
• [PATCH v3 2/5] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v3 3/5] ARM: davinci: da850: add SPI1 DT node   Manjunathappa, Prakash
• [PATCH v3 4/5] ARM: davinci: da850: override SPI DT node device name   Manjunathappa, Prakash
• [PATCH v3 5/5] ARM: davinci: da850-evm: add SPI flash support   Manjunathappa, Prakash
• [RFC PATCH] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware.   Steve Capper
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Paul Mundt
• [PATCH 1/4] clk: samsung: register clk_div_tables for divider clocks   Thomas Abraham
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Javier Martinez Canillas
• [PATCH 2/4] clk: samsung: remove np check in clock init   Thomas Abraham
• [PATCH 2/4] clk: samsung: remove np check in clock init   Heiko Stübner
• [RFC PATCH 1/3] usb: udc-core: introduce vbus_active for struct usb_gadget   Peter Chen
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Peter Chen
• [RFC PATCH 3/3] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [PATCH 01/13] usb: phy: nop: Add device tree support and binding information   Roger Quadros
• [PATCH 02/13] USB: phy: nop: Defer probe if device needs VCC/RESET   Roger Quadros
• [PATCH 2/4] clk: samsung: remove np check in clock init   Heiko Stübner
• [PATCH 0/3] ARM sched_clock selection enhancements   Russell King - ARM Linux
• [PATCH 1/2] cpuidle / kirkwood: remove redundant Kconfig option   Daniel Lezcano
• [PATCH 2/2] cpuidle / calxeda: remove redundant Kconfig option   Daniel Lezcano
• [PATCH 2/4] clk: samsung: remove np check in clock init   Thomas Abraham
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Felipe Balbi
• [RFC PATCH 3/3] usb: udc-core: add judgement logic for usb_gadget_connect   Felipe Balbi
• [PATCH 2/4] clk: samsung: remove np check in clock init   Heiko Stübner
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Thomas Abraham
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Peter Chen
• [PATCH 4/4] clk: samsung: add infrastructure to add separate aliases   Thomas Abraham
• [PATCH V4 0/4] cpufreq: exynos5440: support for cpufreq driver   Amit Daniel Kachhap
• [PATCH V4 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Amit Daniel Kachhap
• [PATCH V4 2/4] cpufreq: exynos: Remove error return even if no soc is found   Amit Daniel Kachhap
• [PATCH V4 3/4] arm: exynos: Enable OPP library support for exynos5440   Amit Daniel Kachhap
• [PATCH V4 4/4] dts: Add cpufreq controller node for Exynos5440 SoC   Amit Daniel Kachhap
• [PATCH 4/4] clk: samsung: add infrastructure to add separate aliases   Heiko Stübner
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Florian Vaussard
• [PATCH v2] arm: fix memset-related crashes caused by recent GCC (4.7.2) optimizations   Alexander Holler
• [PATCH V2 0/5] ARM: DT: tegra114: Add DT entry for different controller   Laxman Dewangan
• [PATCH v2] arm: davinci: fix edma dmaengine induced null pointer dereference on da830   Sekhar Nori
• [PATCH V2 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Marc Dietrich
• [PATCH V2 9/9] ARM: dts: tegra: add the PM configurations of PMC   Marc Dietrich
• [PATCH 4/4] clk: samsung: add infrastructure to add separate aliases   Thomas Abraham
• [PATCH V4 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   Viresh Kumar
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Heiko Stübner
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Russell King - ARM Linux
• [PATCH V3 1/2] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Benoit Cousson
• [PATCH] mach_omap2: use PTR_RET instead of IS_ERR + PTR_ERR   Russell King - ARM Linux
• PL330 interrupt handling   Jassi Brar
• [PATCH 1/1] ARM: OMAP: gpmc: request CS address space for ethernet chips   Russell King - ARM Linux
• linux-next: manual merge of the akpm tree with the arm-soc tree   Jason Cooper
• [PATCH 1/2] cpuidle / kirkwood: remove redundant Kconfig option   Jason Cooper
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Sylwester Nawrocki
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Thomas Abraham
• [PATCH 1/7] clk: samsung: add plls used in s3c2416 and s3c2443   Russell King - ARM Linux
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Russell King - ARM Linux
• linux-next: manual merge of the akpm tree with the arm-soc tree   Olof Johansson
• [PATCH 3/4][V2] ARM: nomadik: add dynamic irq flag to the timer   Linus Walleij
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Thomas Abraham
• linux-next: manual merge of the akpm tree with the arm-soc tree   Jason Cooper
• [PATCH v2] ARM: tegra: expose chip ID and revision   Danny Huang
• [PATCH 1/7] clk: samsung: add plls used in s3c2416 and s3c2443   Sylwester Nawrocki
• [PATCH v2] ARM: tegra: expose chip ID and revision   Russell King - ARM Linux
• [PATCH 04/04] ARM: shmobile: APE6EVM support   Arnd Bergmann
• [PATCH 1/7] clk: samsung: add plls used in s3c2416 and s3c2443   Heiko Stübner
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support   Arnd Bergmann
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC and APE6EVM board support   Arnd Bergmann
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support   Arnd Bergmann
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Arnd Bergmann
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH 0/3] ARM sched_clock selection enhancements   Rob Herring
• linux-next: manual merge of the akpm tree with the arm-soc tree   Arnd Bergmann
• [PATCH v2] ARM: tegra: expose chip ID and revision   Arnd Bergmann
• [PATCH 1/7] clk: samsung: add plls used in s3c2416 and s3c2443   Sylwester Nawrocki
• [PATCH 04/29] arm64: KVM: system register definitions for 64bit guests   Christopher Covington
• [PATCH 06/29] arm64: KVM: fault injection into a guest   Christopher Covington
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Laurent Pinchart
• [PATCH 1/6] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   Greg Kroah-Hartman
• [GIT PULL] DaVinci fixes for v3.9-rc   Sekhar Nori
• linux-next: manual merge of the akpm tree with the arm-soc tree   Jason Cooper
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Russell King - ARM Linux
• [PATCH 04/29] arm64: KVM: system register definitions for 64bit guests   Christopher Covington
• [GIT PULL] ARM: mvebu: DT changes for v3.10   Jason Cooper
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Sylwester Nawrocki
• [PATCH 04/29] arm64: KVM: system register definitions for 64bit guests   Marc Zyngier
• [GIT PULL] arm-soc fixes for 3.9-rc2   Arnd Bergmann
• FW: Regulator API ignored return values   Arnd Bergmann
• [GIT PULL] DaVinci fixes for v3.9-rc   Arnd Bergmann
• [PATCH v5 0/4] Add DT support for davinci_mmc driver   Manjunathappa, Prakash
• [PATCH v5 1/4] ARM: davinci: mmc: derive version information from device name   Manjunathappa, Prakash
• [PATCH v5 2/4] mmc: davinci_mmc: add DT support   Manjunathappa, Prakash
• [PATCH v5 3/4] ARM: davinci: da850: add mmc DT entries   Manjunathappa, Prakash
• [PATCH v5 4/4] ARM: davinci: da850: override mmc DT node device name   Manjunathappa, Prakash
• IS_ERR_VALUE()   Russell King - ARM Linux
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Thomas Abraham
• [PATCH 06/29] arm64: KVM: fault injection into a guest   Marc Zyngier
• [RFC PATCH 1/8] s5p-fimc: Add Exynos4x12 FIMC-IS driver   Hans Verkuil
• FW: Regulator API ignored return values   Chris Ball
• [PATCH 2/4] ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs   Karl Beldan
• [RFC PATCH 5/8] s5p-fimc: Add ISP video capture driver stubs   Hans Verkuil
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH] ARM:net: an issue for k which is u32, never < 0   David Miller
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Russell King - ARM Linux
• [PATCH v9 3/9] ARM: edma: add AM33XX support to the private EDMA API   Matt Porter
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Peter Korsgaard
• [PATCH v9 3/9] ARM: edma: add AM33XX support to the private EDMA API   Matt Porter
• [PATCH v9 5/9] dmaengine: edma: Add TI EDMA device tree binding   Matt Porter
• omap4 pandaboard: clock input for TiWi module inactive   Levi Pearson
• IS_ERR_VALUE()   Tony Lindgren
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• [PATCH v2 00/13] ARM: spear multiplatform support   Arnd Bergmann
• [PATCH v2 01/13] ARM: spear13xx: make mach/dma.h local   Arnd Bergmann
• [PATCH v2 02/13] ARM: spear: unify mach/generic.h and mach/irqs.h   Arnd Bergmann
• [PATCH v2 03/13] ARM: spear: move identical headers to plat-spear/include/mach   Arnd Bergmann
• [PATCH v2 04/13] ARM: spear: make spear3xx/6xx mach/spear.h files identical   Arnd Bergmann
• [PATCH v2 05/13] ARM: spear: merge Kconfig files   Arnd Bergmann
• [PATCH v2 06/13] ARM: spear: move spear.h and misc_regs.h into plat-spear   Arnd Bergmann
• [PATCH v2 08/13] ARM: spear: move generic.h and pl080.h into private dir   Arnd Bergmann
• [PATCH v2 09/13] ARM: spear: make clock driver independent of headers   Arnd Bergmann
• [PATCH v2 10/13] ARM: spear: rename duplicate pl080_plat_data   Arnd Bergmann
• [PATCH v2 11/13] ARM: spear: use multiplatform configuration options.   Arnd Bergmann
• [PATCH v2 12/13] ARM: spear: fix build error in restart.c   Arnd Bergmann
• [PATCH v2 13/13] ARM: spear: enable spear13xx in multi_v7_defconfig   Arnd Bergmann
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• [PATCH 2/2] arm: at91: dt: at91sam9x5: add i2c-gpio pinctrl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] arm: at91: dt: at91sam9x5: add i2c pinctrl   Richard Genoud
• [PATCH 2/2] arm: at91: dt: at91sam9x5: add i2c-gpio pinctrl   Richard Genoud
• [PATCH] omap2: twl-common: Add default power configuration   Tony Lindgren
• [PATCH 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Tony Lindgren
• [PATCH v2 00/14] add hisilicon soc support   Haojian Zhuang
• [PATCH v2 01/14] clocksource: move sp timer driver   Haojian Zhuang
• [PATCH v2 02/14] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH v2 03/14] clocksource: sp804: append CONFIG_OF   Haojian Zhuang
• [PATCH v2 04/14] ARM: highbank: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v2 06/14] ARM: vexpress: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v2 07/14] ARM: debug: support debug ll on hisilicon soc   Haojian Zhuang
• [PATCH v2 08/14] clk: hs: add clock support   Haojian Zhuang
• [PATCH v2 09/14] ARM: hs: add board support with device tree   Haojian Zhuang
• [PATCH v2 10/14] ARM: hs: enable hi4511 with device tree   Haojian Zhuang
• [PATCH v2 11/14] ARM: config: append arch hs into multi defconfig   Haojian Zhuang
• [PATCH v2 12/14] Document: append hisilicon clock binding   Haojian Zhuang
• [PATCH v2 13/14] Document: dts: create hisilicon document   Haojian Zhuang
• [PATCH v2 14/14] Document: add device tree binding file for sp804   Haojian Zhuang
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Tejun Heo
• [PATCH 12/29] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions   Christopher Covington
• [PATCH 14/29] arm64: KVM: guest one-reg interface   Christopher Covington
• [PATCH v2] ARM: tegra: expose chip ID and revision   Stephen Warren
• [PATCH v2] ARM: tegra: expose chip ID and revision   Stephen Warren
• [PATCH v2] ARM: tegra: expose chip ID and revision   Stephen Warren
• [PATCH 14/29] arm64: KVM: guest one-reg interface   Marc Zyngier
• [PATCH v2 01/14] clocksource: move sp timer driver   Arnd Bergmann
• [PATCH v2 02/14] clocksource: sp804: add device tree support   Arnd Bergmann
• Regulator API ignored return values   Mark Brown
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Stephen Warren
• [PATCH v4 0/2] Uncompress debug for multiplatform   Stephen Warren
• [PATCH V2 0/5] ARM: DT: tegra114: Add DT entry for different controller   Stephen Warren
• [PATCH v2 0/11] Qualcomm SSBI bus driver   David Brown
• [PATCH v2 01/11] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver   David Brown
• [PATCH v2 02/11] fix: Use EXPORT_SYMBOL_GPL   David Brown
• [PATCH v2 03/11] ssbi: Fix exit mismatch in remove function   David Brown
• [PATCH v2 04/11] ssbi: Allow compilation as a module   David Brown
• [PATCH v2 05/11] SSBI: Convert SSBI to device tree   David Brown
• [PATCH v2 06/11] ssbi: Comment the use of udelay()   David Brown
• [PATCH v2 07/11] ssbi: Use regular init level   David Brown
• [PATCH v2 08/11] ssbi: Remove extraneous logging   David Brown
• [PATCH v2 09/11] SSBI: Remove MSM_ prefix from SSBI drivers   David Brown
• [PATCH v2 10/11] MAINTAINERS: add ssbi   David Brown
• [PATCH] clk: add table lookup to mux   Peter De Schrijver
• [PATCH v2 02/14] clocksource: sp804: add device tree support   Arnd Bergmann
• [PATCH 01/10] imx-ssi: Fix AC97 rates   Mark Brown
• [PATCH] clk: add table lookup to mux   Stephen Warren
• [PATCH 02/10] imx-ssi: Fix occasional AC97 reset failure   Mark Brown
• [PATCH v2 02/14] clocksource: sp804: add device tree support   Rob Herring
• [PATCH 03/10] mx-ssi: flush fifos   Mark Brown
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Arnd Bergmann
• [PATCH 04/10] ASoC: Kconfig: imx-ssi needs imx-fiq and imx-dma   Mark Brown
• [PATCH 05/10] ASoC: pcm030 audio fabric: remove __init from probe   Mark Brown
• [PATCH 07/10] ASoC: phycore-ac97: Add DT support   Mark Brown
• [PATCH v2 08/14] clk: hs: add clock support   Arnd Bergmann
• OMAP baseline test results for v3.9-rc1   Aaro Koskinen
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Mark Brown
• [PATCH v2 14/14] Document: add device tree binding file for sp804   Arnd Bergmann
• [PATCH v2 01/14] clocksource: move sp timer driver   Russell King - ARM Linux
• [PATCH v2] ARM: tegra: expose chip ID and revision   Arnd Bergmann
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Rob Herring
• [PATCH v2 03/14] clocksource: sp804: append CONFIG_OF   Arnd Bergmann
• [RESEND PATCH 0/3] clk: Fixup issues for clk_set_parent   Ulf Hansson
• [RESEND PATCH 1/3] clk: Remove _clk_reparent from API and restructure code   Ulf Hansson
• [RESEND PATCH 2/3] clk: Improve errorhandling for clk_set_parent   Ulf Hansson
• [RESEND PATCH 3/3] clk: Fixup locking issues for clk_set_parent   Ulf Hansson
• [PATCH] ARM: w1-gpio: fix erroneous gpio requests   Johan Hovold
• [RESEND PATCH 0/4] clk: Provide option to unprepare unused clocks at late init   Ulf Hansson
• [RESEND PATCH 1/4] clk: Introduce optional is_prepared callback   Ulf Hansson
• [RESEND PATCH 2/4] clk: Unprepare the unused prepared slow clocks at late init   Ulf Hansson
• [RESEND PATCH 3/4] clk: Introduce optional unprepare_unused callback   Ulf Hansson
• [RESEND PATCH 4/4] clk: ux500: Support is_prepared callback for clk-prcmu   Ulf Hansson
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH V2 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Stephen Warren
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Arnd Bergmann
• [PATCH v2] ARM: tegra: expose chip ID and revision   Stephen Warren
• IS_ERR_VALUE()   Uwe Kleine-König
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Thomas Gleixner
• [PATCH v2 11/11] RFC: SSBI: Simple pm8058 test driver   David Brown
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Russell King - ARM Linux
• linux-next: manual merge of the akpm tree with the arm-soc tree   Andrew Morton
• [PATCH] ARM: w1-gpio: fix erroneous gpio requests   Greg Kroah-Hartman
• IS_ERR_VALUE()   Russell King - ARM Linux
• [PATCH] ARM: w1-gpio: fix erroneous gpio requests   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 07/11] ssbi: Use regular init level   Stephen Boyd
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH v2 05/11] SSBI: Convert SSBI to device tree   Stephen Boyd
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Rob Herring
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH] ARM: w1-gpio: fix erroneous gpio requests   Johan Hovold
• IS_ERR_VALUE()   Uwe Kleine-König
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Jon Hunter
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH] irqchip: Add support for ARMv7-M's NVIC   Thomas Gleixner
• [PATCH V3 1/2] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Jon Hunter
• [PATCH 14/29] arm64: KVM: guest one-reg interface   Christopher Covington
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH] ASoC: samsung: remove last traces of neo1973-gta01   Paul Bolle
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Andrew Morton
• [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow   Doug Anderson
• [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file   Doug Anderson
• [PATCH 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow   Doug Anderson
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_W1_MASTER_MXC   Greg KH
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_W1_MASTER_MXC   Fabio Estevam
• [PATCH v1] ARM: keep __my_cpu_offset consistent with generic one   Ming Lei
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Darrick J. Wong
• [PATCH] ARM: proc: Add Krait proc info   Stephen Boyd
• [PATCH 0/3] Detect UDIV/SDIV support from ISAR0   Stephen Boyd
• [PATCH 1/3] ARM: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n   Stephen Boyd
• [PATCH 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register   Stephen Boyd
• [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Stephen Boyd
• [PATCH v2 14/14] Document: add device tree binding file for sp804   Haojian Zhuang
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH 2/4] ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs   Shawn Guo
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Haojian Zhuang
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Shawn Guo
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Shawn Guo
• [PATCH v2 01/14] clocksource: move sp timer driver   Haojian Zhuang
• [PATCH v4 0/2] Uncompress debug for multiplatform   Shawn Guo
• [PATCH V2 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Kumar, Anil
• [PATCH] ARM: imx: add dependency check for DEBUG_IMX_UART_PORT   Shawn Guo
• [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Kumar, Anil
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Alim Akhtar
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Peter Chen
• [PATCH v5 2/2] ARM: uncompress debug support for multiplatform build   Shawn Guo
• [PATCHv3 00/14] drivers: mailbox: framework creation   Suman Anna
• [PATCHv3 01/14] mailbox: rename pl320-ipc specific mailbox.h   Suman Anna
• [PATCHv3 02/14] ARM: OMAP2+: mbox: remove dependencies with soc.h   Suman Anna
• [PATCHv3 03/14] mailbox: OMAP: introduce mailbox framework   Suman Anna
• [PATCHv3 04/14] mailbox: split internal header from API header   Suman Anna
• [PATCHv3 05/14] mailbox: rename omap_mbox in mailbox   Suman Anna
• [PATCHv3 06/14] mailbox: create opened message type   Suman Anna
• [PATCHv3 07/14] mailbox: change protection mechanisms   Suman Anna
• [PATCHv3 08/14] mailbox: add shared memory mailbox type   Suman Anna
• [PATCHv3 09/14] mailbox: add IRQF_NO_SUSPEND flag   Suman Anna
• [PATCHv3 10/14] mailbox: add no_irq send message   Suman Anna
• [PATCHv3 11/14] mailbox: create dbx500 mailbox driver   Suman Anna
• [PATCHv3 12/14] mailbox/omap: check iomem resource before dereferencing it   Suman Anna
• [PATCHv3 13/14] mailbox: check for NULL nb in mailbox_put   Suman Anna
• [PATCHv3 14/14] mailbox: call request_irq after mbox queues are allocated   Suman Anna
• [PATCH v2 03/14] clocksource: sp804: append CONFIG_OF   Haojian Zhuang
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Sachin Kamat
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Shuge
• [PATCHv3 01/14] mailbox: rename pl320-ipc specific mailbox.h   Greg Kroah-Hartman
• [PATCH 0/3] DMA: AT91: Fix get residue function in at_hdmac.c   corp\elen.song
• [PATCH v2 08/14] clk: hs: add clock support   Haojian Zhuang
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Andrew Morton
• [PATCH V2 9/9] ARM: dts: tegra: add the PM configurations of PMC   Stephen Warren
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Stephen Warren
• [RFC PATCH] ARM: bcm2835: convert to multi-platform   Stephen Warren
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Stephen Warren
• [PATCH V2 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH v3 00/11] add hisilicon SoC support   Haojian Zhuang
• [PATCH v3 01/11] clocksource: move sp timer driver   Haojian Zhuang
• [PATCH v3 02/11] clocksource: select USE_OF by default   Haojian Zhuang
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH v3 04/11] ARM: integrator: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v3 05/11] ARM: highbank: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v3 07/11] ARM: debug: support debug ll on hisilicon soc   Haojian Zhuang
• [PATCH v3 08/11] clk: hi3xxx: add clock support   Haojian Zhuang
• [PATCH v3 09/11] ARM: hi3xxx: add board support with device tree   Haojian Zhuang
• [PATCH v3 10/11] ARM: hi3xxx: enable hi4511 with device tree   Haojian Zhuang
• [PATCH v3 11/11] ARM: config: append arch hi3xxx into multi defconfig   Haojian Zhuang
• [GIT PULL] Samsung fixes for v3.9   Kukjin Kim
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH -next] ARM: EXYNOS: remove duplicated include from common.c   Kukjin Kim
• [PATCH] ASoC: samsung: remove last traces of neo1973-gta01   Kukjin Kim
• [PATCH 3/4] clk: samsung: always allocate the clk_table   Kyungmin Park
• [PATCH 1/4] Device tree entry for Freescale TDM controller   Singh Sandeep-B37400
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Stephen Warren
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Linus Walleij
• [PATCH V2] ARM: dts: Modify SPI nodes according generic DMA DT bindings   Padma Venkat
• [PATCHv3 01/14] mailbox: rename pl320-ipc specific mailbox.h   Anna, Suman
• [PATCH 1/2] ARM: imx: remove duplicated function declaration   Shawn Guo
• [PATCH 2/2] ARM: imx: remove pl310_get_save_ptr() declaration   Shawn Guo
• [PATCH] mmc: vt8500: use resource_size() macro   Wei Yongjun
• [PATCH V2] DMA: PL330: Add check if device tree compatible   Padma Venkat
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH v2 00/13] ARM: spear multiplatform support   Viresh Kumar
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH v2 00/13] ARM: spear multiplatform support   vipul kumar samar
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Linus Walleij
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Linus Walleij
• [PATCH V3 0/5] Add polling support for 64xx spi controller   Girish K S
• [PATCH V3 1/5] spi: s3c64xx: modified error interrupt handling and init   Girish K S
• [PATCH V3 2/5] spi: s3c64xx: added support for polling mode   Girish K S
• [PATCH V3 3/5] spi: s3c64xx: Added provision for non-gpio i/o's   Girish K S
• [PATCH V3 4/5] spi: s3c64xx: Added provision for dedicated cs pin   Girish K S
• [PATCH V3 5/5] spi: s3c64xx: Added support for exynos5440 spi   Girish K S
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Lokesh Vutla
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v3 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Kukjin Kim
• OMAP baseline test results for v3.9-rc1   Igor Grinberg
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Felipe Balbi
• [PATCH 14/29] arm64: KVM: guest one-reg interface   Marc Zyngier
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Peter Chen
• [PATCH V3 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH V3 1/9] gpio: tegra: add gpio wakeup source handling   Joseph Lo
• [PATCH V3 2/9] ARM: tegra: irq: add wake up handling   Joseph Lo
• [PATCH V3 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH V3 4/9] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH V3 5/9] ARM: dts: tegra: add power gpio keys to DT   Joseph Lo
• [PATCH V3 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC   Joseph Lo
• [PATCH V3 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH V3 8/9] ARM: tegra: config: defconfig update   Joseph Lo
• [PATCH V3 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 1/3] ARM: tegra: moving the CPU power timer function to PMC driver   Joseph Lo
• [PATCH 2/3] ARM: tegra: refactor the pmc_pm_set function   Joseph Lo
• [PATCH 3/3] ARM: tegra: cpuidle: remove redundant parameters for powered-down mode   Joseph Lo
• omap4 pandaboard: clock input for TiWi module inactive   Peter Ujfalusi
• [PATCH] mfd: Fix AB8500 build failure if POWER_SUPPLY is not configured   Samuel Ortiz
• [GIT PULL] Device Tree fixes for v3.9   Samuel Ortiz
• [PATCH v2] mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO   Samuel Ortiz
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Arnd Bergmann
• [RFC PATCH 2/3] usb: udc: delete the vbus indicator at individual driver   Felipe Balbi
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Jan Kara
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Linus Walleij
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Linus Walleij
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [PATCH v3 0/7] ARM: dts: omap: Add dts data for USB   kishon
• [PATCH 1/2] arm: at91: dt: at91sam9x5: correct NAND pins comments   Nicolas Ferre
• [PATCH 3/4] ARM: at91: fix infinite loop in at91_irq_suspend/resume   Nicolas Ferre
• [PATCH] ARM: at91: add gpio suspend/resume support when using pinctrl   Nicolas Ferre
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [PATCH v3 net-next 1/1] drivers: net: davinci_cpdma: acknowledge interrupt properly   Mark Jackson
• [patch 0/7] tick: Optimize broadcast handling and prevent expiry ping pong   Santosh Shilimkar
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Russell King - ARM Linux
• [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type   Peter Chen
• [GIT PULL] at91: fixes for 3.9-rc #1   Nicolas Ferre
• [PATCH 1/1] clk: Fix incorrect return type in clk.c   Sachin Kamat
• [PATCH v3] ARM: tegra: expose chip ID and revision   Danny Huang
• [PATCH 1/2] arm: at91: dt: at91sam9x5: add i2c pinctrl   Ludovic Desroches
• [PATCH v3] ARM: tegra: expose chip ID and revision   Russell King - ARM Linux
• [PATCH 0/5] at91: atmel_lcdfb: regression fixes and cpu_is removal   Nicolas Ferre
• [PATCH] ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb   Paul Walmsley
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Mark Rutland
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• [PATCH] ASoC: samsung: remove last traces of neo1973-gta01   Mark Brown
• [PATCH 2/2] arm: at91: dt: at91sam9x5: add i2c-gpio pinctrl   Ludovic Desroches
• [PATCH 2/2] arm: at91: dt: at91sam9x5: add i2c-gpio pinctrl   Nicolas Ferre
• [PATCH 1/2] arm: at91: dt: at91sam9x5: add i2c pinctrl   Nicolas Ferre
• PL330 interrupt handling   Jassi Brar
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Paul Bolle
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Mark Brown
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Pawel Moll
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Nicolas Ferre
• [PATCH v5 2/2] ARM: uncompress debug support for multiplatform build   Arnd Bergmann
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Paul Bolle
• [PATCH] ARM: proc: Add Krait proc info   Jonathan Austin
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [patch 4/7] tick: Handle broadcast wakeup of multiple cpus   Lorenzo Pieralisi
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Pawel Moll
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Dietmar Eggemann
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Mark Rutland
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Lokesh Vutla
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Nicolas Ferre
• [RFC] arm: use built-in byte swap function   Woodhouse, David
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Rob Herring
• [PATCH v2 0/4] clk: samsung: pm fixes and multiple aliases   Heiko Stübner
• [PATCH v2 1/4] clk: samsung: register clk_div_tables for divider clocks   Heiko Stübner
• [PATCH 2/5] clk: notifier handler for dynamic voltage scaling   Ulf Hansson
• [PATCH v2 2/4] clk: samsung: fix pm init on non-dt platforms   Heiko Stübner
• [PATCH v2 3/4] clk: samsung: always allocate the clk_table   Heiko Stübner
• [PATCH 4/4] clk: samsung: add infrastructure to add separate aliases   Heiko Stübner
• [PATCH v8 07/12] gpio: palmas: add in GPIO support for palmas charger   Linus Walleij
• [PATCH 2/3] ARM: at91: rename board-dt to more specific name board-dt-sam9   Nicolas Ferre
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Rob Herring
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Thomas Gleixner
• [PATCH v8 08/12] gpio: palmas: Enable DT support for palmas gpio.   Linus Walleij
• [PATCH 3/3] ARM: at91: renamme rm9200 dt file   Nicolas Ferre
• [Bulk] Re: [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Linus Walleij
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Sergei Shtylyov
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Nicolas Ferre
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Gregory CLEMENT
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Gregory CLEMENT
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Pawel Moll
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Rob Herring
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH v3 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Doug Anderson
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Pawel Moll
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH V3 1/2] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Benoit Cousson
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Jonas Jensen
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Rob Herring
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Haojian Zhuang
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Linus Walleij
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH V3 1/2] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Jon Hunter
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Haojian Zhuang
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Linus Walleij
• [PATCH V3 1/2] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Benoit Cousson
• [PATCH] ARM: at91/avr32/atmel-mci: fix DMA-channel leak on module unload   Johan Hovold
• omap4 pandaboard: clock input for TiWi module inactive   Levi Pearson
• [PATCH 4/6] arm: vt8500: Remove gpio devicetree nodes   Linus Walleij
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Mark Rutland
• [PATCH 4/6] arm: vt8500: Remove gpio devicetree nodes   Arnd Bergmann
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Pawel Moll
• [PATCH] topology: removed kzalloc return value cast   Vincent Guittot
• [PATCH 3/3] ARM: at91: renamme rm9200 dt file   Nicolas Ferre
• [PATCH V2] clk: Add composite clock type   Tomasz Figa
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Rob Herring
• [PATCH 2/3] ARM: at91: rename board-dt to more specific name board-dt-sam9   Nicolas Ferre
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Arnd Bergmann
• [PATCH v4 2/3] ARM: dts: Add i2c-arbitrator bus for exynos5250-snow   Doug Anderson
• [PATCH v4 3/3] ARM: dts: Add sbs-battery for exynos5250-snow   Doug Anderson
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Pawel Moll
• [PATCH] arm: dts: Add uart1 and uart2 to igep boards.   Benoit Cousson
• [PATCH] ARM: fix CONFIG_VIRT_TO_BUS handling   Arnd Bergmann
• [Resend/PATCH 0/5] omap4/5: i2c/spi: device tree data   Benoit Cousson
• [PATCH 0/3] Separate generic header usage from ARCH_MULTIPLATFORM   Jonathan Austin
• [PATCH 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Jonathan Austin
• [PATCH 2/3] ARM: nommu: re-enable use of vexpress without ARCH_MULTIPLATFORM   Jonathan Austin
• [PATCH 3/3] ARM: vexpress-nommu: add a Makefile.boot to restore single-platform build   Jonathan Austin
• [PATCH 6/7] ARM: SAMSUNG: use clk_prepare_enable in samsung-time   Pankaj Jangra
• memory leak and other oddness in pinctrl-mvebu.c   Linus Walleij
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 1/1] clk: Fix incorrect return type in clk.c   Pankaj Jangra
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Gunthorpe
• [PATCH] ARM: dts: add usb 2.0 clock references to device tree   Doug Anderson
• [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree   Doug Anderson
• [PATCH] ARM: dts: add usb 2.0 clock references to device tree   Doug Anderson
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH] pinctrl: mvebu: prevent walking off the end of group array   Jason Cooper
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Gunthorpe
• [PATCH V3 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH 1/3] ARM: tegra: moving the CPU power timer function to PMC driver   Stephen Warren
• [PATCH v2] ARM: OMAP4: PM: Avoid expensive cpu_suspend() path for all CPU power states except off   Kevin Hilman
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Andrew Lunn
• [PATCH v3] ARM: tegra: expose chip ID and revision   Stephen Warren
• [PATCH] pinctrl: mvebu: prevent walking off the end of group array   Linus Walleij
• [PATCH V2] pinctrl: mvebu: prevent walking off the end of group array   Jason Cooper
• [PATCH] pinctrl: mvebu: prevent walking off the end of group array   Sebastian Hesselbarth
• [PATCH -next] pinctrl: sirf: using for_each_set_bit to simplify the code   Linus Walleij
• [PATCH] pinctrl: mvebu: prevent walking off the end of group array   Jason Cooper
• [PATCH 2/3] ARM: tegra: refactor the pmc_pm_set function   Stephen Warren
• [PATCH] arm: dts: Add uart1 and uart2 to igep boards.   Javier Martinez Canillas
• [PATCHv3 03/14] mailbox: OMAP: introduce mailbox framework   Linus Walleij
• [GIT PULL] Device Tree fixes for v3.9   Arnd Bergmann
• [PATCH V3 4/9] ARM: tegra: pm: add platform suspend support   Stephen Warren
• [Resend/PATCH 0/5] omap4/5: i2c/spi: device tree data   Sourav Poddar
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Stephen Warren
• [PATCHv3 00/10] Remove ARM local timer API   Stephen Boyd
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCHv3 02/10] ARM: smp: Remove duplicate dummy timer implementation   Stephen Boyd
• [PATCHv3 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCHv3 04/10] ARM: OMAP2+: Divorce from local timer API   Stephen Boyd
• [PATCHv3 05/10] ARM: EXYNOS4: Divorce mct from local timer API   Stephen Boyd
• [PATCHv3 06/10] ARM: PRIMA2: Divorce timer-marco from local timer API   Stephen Boyd
• [PATCHv3 07/10] ARM: msm: Divorce msm_timer from local timer API   Stephen Boyd
• [PATCHv3 08/10] clocksource: time-armada-370-xp: Fix sparse warning   Stephen Boyd
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
• [PATCHv3 10/10] ARM: smp: Remove local timer API   Stephen Boyd
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Stephen Warren
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH 10/29] arm64: KVM: Cortex-A57 specific system registers handling   Christopher Covington
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Gunthorpe
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Thomas Gleixner
• [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Daniel Mack
• [PATCH] pinctrl: mvebu: prevent walking off the end of group array   Linus Walleij
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Linus Walleij
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH] ARM: at91: add gpio suspend/resume support when using pinctrl   Linus Walleij
• [Bulk] Re: [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [Bulk] Re: [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Linus Walleij
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Darrick J. Wong
• [PATCH V3 0/5] ARM: DT: tegra114: Add DT entry for different controller   Laxman Dewangan
• [PATCH V3 1/5] ARM: tegra: add APB DMA nodes to Tegra114 DT   Laxman Dewangan
• [PATCH V3 2/5] ARM: tegra: add i2c nodes to Tegra114 DT   Laxman Dewangan
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Laxman Dewangan
• [PATCH V3 4/5] ARM: tegra: add KBC nodes to Tegra114 DT   Laxman Dewangan
• [PATCH V3 5/5] ARM: tegra: add spi nodes to Tegra114 DT   Laxman Dewangan
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 16/29] arm64: KVM: HYP mode world switch implementation   Christopher Covington
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Stephen Warren
• [RFC 0/2] ARM: OMAP: dma.h cleanup   Jarkko Nikula
• [PATCH v8 01/12] mfd: DT bindings for the palmas family MFD   Stephen Warren
• [PATCH v8 11/12] leds: Kconfig for Palmas LEDs   Stephen Warren
• [PATCH 14/29] arm64: KVM: guest one-reg interface   Christopher Covington
• [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work   Doug Anderson
• [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file   Doug Anderson
• [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow   Doug Anderson
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Jan Kara
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   Christian Daudt
• [PATCH V7 2/2] ARM: bcm281xx: Add timer driver (DT portion)   Christian Daudt
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCHv3 03/14] mailbox: OMAP: introduce mailbox framework   Anna, Suman
• [patch 4/7] tick: Handle broadcast wakeup of multiple cpus   Thomas Gleixner
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Sergei Shtylyov
• [PATCH] ARM: fix CONFIG_VIRT_TO_BUS handling   Stephen Rothwell
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   dinguyen at altera.com
• [PATCHv1 1/2] ARM: socfpga: Enable hotplug and soft reset   dinguyen at altera.com
• [PATCHv1 2/2] ARM: socfpga: Add clock entries into device tree   dinguyen at altera.com
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 1/7] ARM: shmobile: marzen: add USB phy support   Sergei Shtylyov
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 00/10] ASoC: imx sound: Add DT support   Timur Tabi
• [PATCH 01/10] imx-ssi: Fix AC97 rates   Timur Tabi
• [PATCH 6/7] ARM: SAMSUNG: use clk_prepare_enable in samsung-time   Heiko Stübner
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   John Stultz
• [PATCH v8 11/12] leds: Kconfig for Palmas LEDs   Ian Lartey
• [PATCH 03/10] ARM: shmobile: r8a7779: add USB EHCI clock support   Sergei Shtylyov
• [PATCH RESEND 0/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition   Ruslan Bilovol
• [PATCH RESEND 1/1] omap4: control: Add the CONTROL_SMART2IO_PADCONF_2 register definition   Ruslan Bilovol
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Kuninori Morimoto
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Rob Herring
• [PATCH 1/7] ARM: shmobile: marzen: add USB phy support   Kuninori Morimoto
• [PATCH v4] ARM: tegra: expose chip ID and revision   Danny Huang
• [PATCH 03/10] ARM: shmobile: r8a7779: add USB EHCI clock support   Kuninori Morimoto
• [PATCH 0/3] ARM: EXYNOS5250: Enable KVM support   Alexander Graf
• [PATCH 1/3] ARM: EXYNOS5250: dts: Declare the gic as a15 compatible   Alexander Graf
• [PATCH 2/3] ARM: EXYNOS5250: dts: Add architected timer nodes   Alexander Graf
• [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Alexander Graf
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Rob Herring
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Kuninori Morimoto
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH V3 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH 1/3] ARM: tegra: moving the CPU power timer function to PMC driver   Joseph Lo
• [PATCH 2/3] ARM: tegra: refactor the pmc_pm_set function   Joseph Lo
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [kvmarm] [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Christoffer Dall
• [Suggestion] Latest randconfig build errors for CONFIG_MMU=no   Chen Gang
• [Suggestion] Latest randconfig build errors for CONFIG_MMU=no   Chen Gang
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Sricharan R
• [PATCH] ARM:OMAP2: an issue about curr_pwrst, u8 is never < 0   Chen Gang
• [PATCH v3] arm: fix a wrong value returned from CALLER_ADDRn   kpark3469 at gmail.com
• [Suggestion] Latest randconfig build errors for Head.S   Chen Gang
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Stephen Warren
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   Catalin Marinas
• [PATCH 00/14] Add vbus status to udc-core   Peter Chen
• [PATCH 01/14] usb: udc-core: introduce vbus_active for struct usb_gadget   Peter Chen
• [PATCH 02/14] usb: chipidea: using common vbus_active   Peter Chen
• [PATCH 03/14] usb: at91_udc: using common vbus_active   Peter Chen
• [PATCH 04/14] usb: fsl_udc_core: using common vbus_active   Peter Chen
• [PATCH 05/14] usb: lpc32xx_udc: using common vbus_active   Peter Chen
• [PATCH 06/14] usb: mv_u3d_core: using common vbus_active   Peter Chen
• [PATCH 07/14] usb: mv_udc: using common vbus_active   Peter Chen
• [PATCH 08/14] usb: omap_udc: using common vbus_active   Peter Chen
• [PATCH 09/14] usb: pch_udc: using common vbus_active   Peter Chen
• [PATCH 10/14] usb: pxa25x_udc: using common vbus_active   Peter Chen
• [PATCH 11/14] usb: pxa27x_udc: using common vbus_active   Peter Chen
• [PATCH 12/14] usb: s3c2410_udc: using common vbus_active   Peter Chen
• [PATCH 13/14] usb: udc-core: small cleanup for udc->gadget   Peter Chen
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [PATCH 0/6] Remove mxsfb auxdata   Shawn Guo
• [PATCH 1/6] video: mxsfb: use devm_* managed functions   Shawn Guo
• [PATCH 2/6] video: mxsfb: remove fb_phys/fb_size from platform_data   Shawn Guo
• [PATCH 3/6] video: mxsfb: remove dotclk_delay from platform_data   Shawn Guo
• [PATCH 4/6] video: mxsfb: get display timings from device tree   Shawn Guo
• [PATCH 5/6] ARM: mxs: move display timing configurations into device tree   Shawn Guo
• [PATCH 6/6] video: mxsfb: remove mxsfb_platform_data   Shawn Guo
• [Bulk] Re: [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH 0/3] ARM: EXYNOS: cpuidle: Several fixes in exynos cpuidle/PM   Amit Daniel Kachhap
• [PATCH 1/3] ARM: EXYNOS: Move arm core power down clock to exynos5250 common clock   Amit Daniel Kachhap
• [PATCH 2/3] ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm   Amit Daniel Kachhap
• [PATCH 3/3] ARM: EXYNOS: cpuidle: Allow C1 state only in supported SOC's.   Amit Daniel Kachhap
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Shawn Guo
• [PATCH v2] ARM: OMAP4: PM: Avoid expensive cpu_suspend() path for all CPU power states except off   Santosh Shilimkar
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [Resend/PATCH 0/5] omap4/5: i2c/spi: device tree data   Santosh Shilimkar
• [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree   Vivek Gautam
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: APE6EVM support   Magnus Damm
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH v4 0/5] support hisilicon SoC   Haojian Zhuang
• [PATCH v4 1/5] ARM: debug: support debug ll on hisilicon soc   Haojian Zhuang
• [PATCH v4 2/5] clk: hi3xxx: add clock support   Haojian Zhuang
• [PATCH v4 3/5] ARM: hi3xxx: add board support with device tree   Haojian Zhuang
• [PATCH v4 4/5] ARM: hi3xxx: enable hi4511 with device tree   Haojian Zhuang
• [PATCH v4 5/5] ARM: config: append arch hi3xxx into multi defconfig   Haojian Zhuang
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC and APE6EVM board support   Magnus Damm
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Santosh Shilimkar
• [PATCH] ARM: tegra114: add speedo-based process identification   Danny Huang
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support   Magnus Damm
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [PATCH] ARM: OMAP: drop "select MACH_NOKIA_RM696"   Paul Bolle
• [PATCHv3 03/14] mailbox: OMAP: introduce mailbox framework   Linus Walleij
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Paul Bolle
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Nicolas Ferre
• [PATCH v5 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Prabhakar Lad
• [GIT PULL] at91: fixes for 3.9-rc #1   Nicolas Ferre
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Thomas Gleixner
• ARM: at-91: ARCH_AT91SAM9X5 went missing   Paul Bolle
• [kvmarm] [PATCH 14/29] arm64: KVM: guest one-reg interface   Peter Maydell
• [PATCH v5 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Sekhar Nori
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC and APE6EVM board support   Arnd Bergmann
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Felipe Balbi
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH] drivers/clk: fixup commit 72480014b86c8b51fb51c5c6a0525876055c37c7   Chen Gang
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support   Arnd Bergmann
• [PATCH v4 2/5] clk: hi3xxx: add clock support   Arnd Bergmann
• [PATCH v4 5/5] ARM: config: append arch hi3xxx into multi defconfig   Arnd Bergmann
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   Thomas Gleixner
• [PATCH v3 2/5] spi/davinci: add DT binding documentation   Sekhar Nori
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Peter De Schrijver
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [PATCH] drivers: gpio: Use devm_ioremap_resource function   Alexandru Gheorghiu
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [RFC v2 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH] drivers: gpio: Use devm_ioremap_resource function   Sachin Kamat
• [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver   Santosh Shilimkar
• some question about monitor mode support in arm   loody
• [PATCH v4 5/5] ARM: config: append arch hi3xxx into multi defconfig   Haojian Zhuang
• [PATCH v4 2/5] clk: hi3xxx: add clock support   Haojian Zhuang
• [RFC v2 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [RFC v3 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH V2 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Felipe Balbi
• [PATCH v3 net-next 1/1] drivers: net: davinci_cpdma: acknowledge interrupt properly   Mugunthan V N
• [PATCH v3 2/5] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v3 0/5] Enable SPI flash support on da850-evm DT kernel   Sekhar Nori
• [PATCH 10/29] arm64: KVM: Cortex-A57 specific system registers handling   Marc Zyngier
• [PATCH v3 net-next 1/1] drivers: net: davinci_cpdma: acknowledge interrupt properly   Mark Jackson
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Mark Rutland
• [PATCH V2] pinctrl: mvebu: prevent walking off the end of group array   David Woodhouse
• [PATCH 0/3] Davinci support for EHRPWM & ECAP   Philip Avinash
• [PATCH 1/3] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices   Philip Avinash
• [PATCH 2/3] pwm: pwm-tiecap: Add device-tree binding support for da850 SOC   Philip Avinash
• [PATCH 3/3] pwm: pwm-tiehrpwm: Add device tree binding support for da850 SOC   Philip Avinash
• [PATCH 0/3] Platform support for EHRPWM & ECAP devices in Davinci.   Philip Avinash
• [PATCH 1/3] arm: davinci: clock node support for ECAP & EHRPWM   Philip Avinash
• [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1   Philip Avinash
• [PATCH 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip Avinash
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Santosh Shilimkar
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Pavel Machek
• [PATCH v5 1/4] ARM: davinci: mmc: derive version information from device name   Sekhar Nori
• [PATCH 1/4] mtd: merge mtdchar module with mtdcore   Artem Bityutskiy
• [PATCH 2/4] Documentation: mtd: amend the sysfs docs after mtdchar merge   Artem Bityutskiy
• [PATCH 3/4] arm: mach-pxa: amend Kconfig after mtdchar merge   Artem Bityutskiy
• [PATCH 4/4] arch: cris: amend Kconfig after mtdchar merge   Artem Bityutskiy
• OMAP baseline test results for v3.9-rc1   Hiremath, Vaibhav
• [RFC PATCH 0/3] ARM: OMAP2+: Add command line parameter for debugSS module control   Hiremath, Vaibhav
• [PATCH 1/3] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices   Sekhar Nori
• [PATCH 2/3] pwm: pwm-tiecap: Add device-tree binding support for da850 SOC   Sekhar Nori
• OMAP baseline test results for v3.9-rc1   Santosh Shilimkar
• [PATCH] ARM: i.MX25: Fix DT compilation   Sascha Hauer
• [PATCH v5 0/4] Add DT support for davinci_mmc driver   Sekhar Nori
• [PATCH v8 07/12] gpio: palmas: add in GPIO support for palmas charger   Ian Lartey
• [PATCH] i.MX: Add GPT devicetree nodes   Sascha Hauer
• [PATCH 1/7] ARM: i.MX: Add GPT devicetree Documentation   Sascha Hauer
• [PATCH 2/7] ARM: i.MX27: Add GPT devicetree nodes   Sascha Hauer
• [PATCH 3/7] ARM: i.MX31: Add GPT devicetree node   Sascha Hauer
• [PATCH 4/7] ARM: i.MX51: Add GPT devicetree node   Sascha Hauer
• [PATCH 5/7] ARM: i.MX53: Add GPT devicetree node   Sascha Hauer
• [PATCH 6/7] ARM: i.MX6: Add clocks to GPT devicetree node   Sascha Hauer
• [PATCH 7/7] ARM: i.MX27: Add clocks to GPT devicetree nodes   Sascha Hauer
• [PATCH 1/3] arm: davinci: clock node support for ECAP & EHRPWM   Sekhar Nori
• [PATCH 0/2] Fix crash on OMAP with CONFIG_DEBUG_SLAB   Rajendra Nayak
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Rajendra Nayak
• [PATCH 04/10] ASoC: Kconfig: imx-ssi needs imx-fiq and imx-dma   Markus Pargmann
• [PATCH 01/10] imx-ssi: Fix AC97 rates   Markus Pargmann
• [PATCH 0/2] Fix crash on OMAP with CONFIG_DEBUG_SLAB   Rajendra Nayak
• [PATCH 2/3] pwm: pwm-tiecap: Add device-tree binding support for da850 SOC   Philip, Avinash
• [PATCH 1/3] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices   Philip, Avinash
• [PATCH 07/10] ASoC: phycore-ac97: Add DT support   Markus Pargmann
• [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1   Sekhar Nori
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Markus Pargmann
• [PATCH 00/10] Use module_platform_driver_probe() part 2   Fabio Porcedda
• [PATCH 01/10] drivers: media: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 02/10] drivers: ata: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 03/10] drivers: char: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 04/10] drivers: hwmon: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 05/10] drivers: ide: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 06/10] drivers: input: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 07/10] drivers: memory: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 08/10] drivers: mfd: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 09/10] drivers: video: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 1/7] ARM: shmobile: marzen: add USB phy support   Sergei Shtylyov
• [PATCH 01/10] drivers: media: use module_platform_driver_probe()   Guennadi Liakhovetski
• [Suggestion] Latest randconfig build errors for CONFIG_MMU=no   Jonathan Austin
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Arnd Bergmann
• [PATCH v4 5/5] ARM: config: append arch hi3xxx into multi defconfig   Arnd Bergmann
• some question about monitor mode support in arm   Christopher Covington
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Dinh Nguyen
• [PATCH v3 0/5] Enable SPI flash support on da850-evm DT kernel   Manjunathappa, Prakash
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Sergei Shtylyov
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support   Arnd Bergmann
• [PATCH v2 03/14] clocksource: sp804: append CONFIG_OF   Arnd Bergmann
• [PATCH v5 1/4] ARM: davinci: mmc: derive version information from device name   Manjunathappa, Prakash
• [PATCH v5 0/4] Add DT support for davinci_mmc driver   Manjunathappa, Prakash
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH 04/10] drivers: hwmon: use module_platform_driver_probe()   Guenter Roeck
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Sascha Hauer
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Benoit Cousson
• [PATCH 1/3] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices   Thierry Reding
• [PATCH] usb: limit OMAP related USB options to OMAP2PLUS platforms   Paul Gortmaker
• [PATCH] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH 2/3] pwm: pwm-tiecap: Add device-tree binding support for da850 SOC   Peter Korsgaard
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Benoit Cousson
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Florian Vaussard
• [PATCH 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Peter Korsgaard
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Jon Hunter
• [PATCH] mmc: mxcmmc: DT support   Anatolij Gustschin
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Ezequiel Garcia
• [PATCH V2] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Benoit Cousson
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Jon Hunter
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Jon Hunter
• [PATCH 1/2] ARM: dts: OMAP3: Add GPMC controller   Benoit Cousson
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Javier Martinez Canillas
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   Arnd Bergmann
• [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Benoit Cousson
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Jon Hunter
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Benoit Cousson
• [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates   Benoit Cousson
• [PATCH] genirq: allow an alternative setup for the mask cache   Holger Brunck
• [PATCH] usb: limit OMAP related USB options to OMAP2PLUS platforms   Felipe Balbi
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• [PATCH V2] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Gunthorpe
• [PATCH] mmc: mxcmmc: DT support   Markus Pargmann
• [PATCH 01/10] drivers: media: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 04/10] drivers: hwmon: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH V2] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Patrice CHOTARD
• [PATCH v2 0/4] SAMA5D3 support   ludovic.desroches at atmel.com
• [PATCH 1/4] ARM: at91: change name template in AT91_SOC_START macro   ludovic.desroches at atmel.com
• [PATCH 2/4] ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation   ludovic.desroches at atmel.com
• [PATCH 3/4] ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch   ludovic.desroches at atmel.com
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   ludovic.desroches at atmel.com
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Tony Lindgren
• [PATCH v2 0/8] Use module_platform_driver_probe() part 2   Fabio Porcedda
• [PATCH v2 1/8] drivers: media: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 2/8] drivers: ata: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 4/8] drivers: input: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 5/8] drivers: memory: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 6/8] drivers: mfd: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 7/8] drivers: video: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 8/8] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2 1/8] drivers: media: use module_platform_driver_probe()   Guennadi Liakhovetski
• GPS tracker with multi discrete input and output /Attn: purchase manager与您共享了相册。   GPS tracker with multi discrete input and output /Attn: purchase manager
• [PATCH V2] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Gregory CLEMENT
• [PATCH 0/5] mv643xx_eth: use mvmdio MDIO bus driver   Jason Cooper
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   Marc Zyngier
• [PATCH V2] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH v2 4/8] drivers: input: use module_platform_driver_probe()   Dmitry Torokhov
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Kevin Hilman
• [PATCH] genirq: allow an alternative setup for the mask cache   Simon Guinot
• [PATCH V3] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [PATCH] drivers/clk: fixup commit 72480014b86c8b51fb51c5c6a0525876055c37c7   Tony Prisk
• [PATCH v2 4/8] drivers: input: use module_platform_driver_probe()   Fabio Porcedda
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Stephen Warren
• [PATCH 1/7] ARM: i.MX: Add GPT devicetree Documentation   Stephen Warren
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Florian Fainelli
• [PATCH 2/4 v2] net: mvmdio: rename base register cookie from smireg to regs   Florian Fainelli
• [PATCH 3/4 v2] net: mvmdio: enhance driver to support SMI error/done interrupts   Florian Fainelli
• [PATCH 4/4 v2] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Florian Fainelli
• [PATCH 0/5] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 1/4 v2] net: mvmdio: allow platform device style registration   Florian Fainelli
• [PATCH 0/5] mv643xx_eth: use mvmdio MDIO bus driver   Jason Cooper
• [PATCHv3 03/14] mailbox: OMAP: introduce mailbox framework   Anna, Suman
• [PATCH] usb: limit OMAP related USB options to OMAP2PLUS platforms   Paul Gortmaker
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [GIT PULL]: ARM: OMAP: miscellaneous PM/clock fixes for 3.9-rc   Paul Walmsley
• OMAP baseline test results for v3.9-rc2   Paul Walmsley
• [PATCH] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Jason Cooper
• [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Sergei Shtylyov
• [PATCH] genirq: allow an alternative setup for the mask cache   Thomas Gleixner
• [PATCH] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Florian Fainelli
• [PATCH] ARM: smp: Allow real broadcast device selection instead of always dummy   Stephen Boyd
• [PATCH] genirq: allow an alternative setup for the mask cache   Ezequiel Garcia
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Gregory CLEMENT
• [PATCH RFC] ARM: implement "uncompressed zImage"   Uwe Kleine-König
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   Laura Abbott
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH] ARM: decompressor: clearify a comment and minor typo fixes   Uwe Kleine-König
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Jason Cooper
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Nishanth Menon
• [PATCH 1/8] ARM: dts: OMAP34xx: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH 3/8] ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU   Nishanth Menon
• [PATCH 4/8] ARM: dts: OMAP443x: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH 5/8] ARM: dts: omap4-panda: move generic sections to panda-common   Nishanth Menon
• [PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH 7/8] ARM: OMAP3+: use cpu0-cpufreq driver   Nishanth Menon
• [PATCH 8/8] cpufreq: omap: remove omap-cpufreq   Nishanth Menon
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Mitch Bradley
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Gunthorpe
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH 24/32] pci: PCIe driver for Marvell Armada 370/XP systems   Thierry Reding
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Jon Hunter
• [PATCH 1/8] ARM: dts: OMAP34xx: move CPU OPP tables to device tree   Jon Hunter
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Jon Hunter
• [PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree   Jon Hunter
• [PATCH 1/3] mfd: remove __exit_p annotation for twl4030_madc_remove   Arnd Bergmann
• [PATCH 2/3] mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error   Arnd Bergmann
• [PATCH 3/3] mfd: ab8500: kill "reg" property from binding   Arnd Bergmann
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   Arnd Bergmann
• [PATCH] ethernet/tulip: DE4x5 needs VIRT_TO_BUS   Arnd Bergmann
• [PATCH] vfio: include <linux/slab.h> for kmalloc   Arnd Bergmann
• [PATCH] [media] ir: IR_RX51 only works on OMAP2   Arnd Bergmann
• [PATCH] Turn off -Wmaybe-uninitialized when building with -Os   Arnd Bergmann
• [PATCH 0/6] ARM platform spring cleaning   Arnd Bergmann
• [PATCH 1/6] ARM: gemini: get platform to build again   Arnd Bergmann
• [PATCH 2/6] ARM: gemini: remove platform support   Arnd Bergmann
• [PATCH 3/6] ARM: remove fa526 CPU support   Arnd Bergmann
• [PATCH 4/6] ARM: l7200: remove zombie file   Arnd Bergmann
• [PATCH 5/6] ARM: kill Hynix h720x platform   Arnd Bergmann
• [PATCH 6/6] mtd: remove h720x flash support   Arnd Bergmann
• [PATCH 0/5] cns3xxx multiplatform support   Arnd Bergmann
• [PATCH V2 1/2] ARM: bcm281xx: Add L2 cache enable code   Christian Daudt
• [PATCH 1/5] ARM: cns3xxx: make mach header files local   Arnd Bergmann
• [PATCH V2 2/2] ARM: bcm281xx: Add DT support for SMC handler   Christian Daudt
• [PATCH 2/5] ARM: cns3xxx: enable sparse IRQ support   Arnd Bergmann
• [PATCH 3/5] ARM: cns3xxx: move debug_ll code to include/debug/   Arnd Bergmann
• [PATCH 4/5] ARM: cns3xxx: enable multiplatform support   Arnd Bergmann
• [PATCH 5/5] ARM: cns3xxx: initial DT support   Arnd Bergmann
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Darrick J. Wong
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Andrew Morton
• [GIT PULL] at91: fixes for 3.9-rc #1   Arnd Bergmann
• [GIT PULL] Samsung fixes for v3.9   Arnd Bergmann
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Andrew Morton
• [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree   Doug Anderson
• [PATCH 0/5] at91: atmel_lcdfb: regression fixes and cpu_is removal   Arnd Bergmann
• gen_pool_add broken with LPAE based systems   Laura Abbott
• [PATCH net-next] drivers:net: Remove dma_alloc_coherent OOM messages   Joe Perches
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Darrick J. Wong
• [Suggestion] Latest randconfig build errors for Head.S   Russell King - ARM Linux
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH] ARM: sched_clock: Add more notrace to prevent recursion   Stephen Boyd
• [Suggestion] Latest randconfig build errors for CONFIG_MMU=no   Chen Gang
• [Suggestion] Latest randconfig build errors for Head.S   Chen Gang
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Kuninori Morimoto
• [PATCH] drivers/clk: fixup commit 72480014b86c8b51fb51c5c6a0525876055c37c7   Chen Gang
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Mark Brown
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree   Jingoo Han
• [PATCH 0/3] Fix msm timer clearing bugs   Stephen Boyd
• [PATCH 1/3] ARM: msm: Stop counting before reprogramming clockevent   Stephen Boyd
• [PATCH 2/3] ARM: msm: Rework timer binding to be more general   Stephen Boyd
• [PATCH 3/3] ARM: msm: Wait for timer clear to complete   Stephen Boyd
• [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Shawn Guo
• [PATCH 1/2] dmaengine: add const for name parameter   Shawn Guo
• [PATCH 2/2] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Shawn Guo
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Shawn Guo
• [PATCH 2/3] pwm: pwm-tiecap: Add device-tree binding support for da850 SOC   Sekhar Nori
• [PATCH 8/8] cpufreq: omap: remove omap-cpufreq   Viresh Kumar
• [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1   Philip, Avinash
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Will Deacon
• [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1   Sekhar Nori
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Santosh Shilimkar
• [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1   Philip, Avinash
• [PATCH 5/6] ARM: kill Hynix h720x platform   Robert Schwebel
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Stephen Warren
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support   Magnus Damm
• [PATCH] ARM: mx27: Replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH 1/7] ARM: i.MX: Add GPT devicetree Documentation   Shawn Guo
• [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1   Sekhar Nori
• [PATCH] i.MX: Add GPT devicetree nodes   Shawn Guo
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [PATCH 1/7] ARM: i.MX: Add GPT devicetree Documentation   Sascha Hauer
• [PATCH 5/6] ARM: kill Hynix h720x platform   Sascha Hauer
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   Geert Uytterhoeven
• [PATCH] [media] ir: IR_RX51 only works on OMAP2   Timo Kokkonen
• [PATCH 1/3] mfd: remove __exit_p annotation for twl4030_madc_remove   Samuel Ortiz
• [PATCH 2/3] mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error   Samuel Ortiz
• [PATCH 3/3] mfd: ab8500: kill "reg" property from binding   Samuel Ortiz
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   Sricharan R
• Anyone implement Cortex A9 FIQ   Frank Li
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Felipe Balbi
• [GIT PULL][for 3.10] pull request from hi3xxx branch in pxa git tree   Haojian Zhuang
• [PATCH] ARM: mmp: add platform_device head file in gplugd   Haojian Zhuang
• [GIT PULL][for 3.9] pull request from fix branch in pxa git tree   Haojian Zhuang
• [PATCH 1/4] mtd: merge mtdchar module with mtdcore   Artem Bityutskiy
• [PATCH 8/8] ARM: OMAP5: clock: No Freqsel on OMAP5 devices   Santosh Shilimkar
• [PATCH] DMA: OF: Check properties value before running be32_to_cpup() on it   Viresh Kumar
• [PATCH 1/2] dmaengine: add const for name parameter   Markus Pargmann
• [GIT PULL] ARM: omap2: twl-common update   Peter Ujfalusi
• [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request   Markus Pargmann
• [PATCH] omap2: twl-common: Add default power configuration   Peter Ujfalusi
• [Suggestion] Latest randconfig build errors for Head.S   Andrea Adami
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Peter De Schrijver
• [PATCH 2/2] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Sebastien Guiriec
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Jan Kara
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Ulf Hansson
• [GIT PULL] at91: framebuffer enhancements for 3.10   Nicolas Ferre
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   Arnd Bergmann
• [PATCH 0/5] at91: atmel_lcdfb: regression fixes and cpu_is removal   Nicolas Ferre
• [PATCH 2/3] mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error   Arnd Bergmann
• [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow   Naveen Krishna Ch
• [PATCH 0/8] ARM: dts: OMAP5: ocp address space and few updates   Santosh Shilimkar
• [PATCH v3 0/7] ARM: dts: omap: Add dts data for USB   Benoit Cousson
• [GIT PULL][for 3.9] pull request from fix branch in pxa git tree   Arnd Bergmann
• [PATCH 0/6] ARM platform spring cleaning   Arnd Bergmann
• [Suggestion] Latest randconfig build errors for Head.S   Chen Gang
• [RESEND 0/2] davinci: Add device tree data for tps6507x.   Sekhar Nori
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Felipe Balbi
• [PATCH] ARM: at91/dt: gpio-keys: remove address-cells and size-cells properties   Nicolas Ferre
• [GIT PULL][for 3.9] pull request from fix branch in pxa git tree   Haojian Zhuang
• [PATCH] genirq: allow an alternative setup for the mask cache   Holger Brunck
• Anyone implement Cortex A9 FIQ   Jonathan Austin
• [PATCH] ARM: at91/avr32/atmel-mci: fix DMA-channel leak on module unload   Ludovic Desroches
• [Suggestion] Latest randconfig build errors for Head.S   Arnd Bergmann
• [PATCH 0/5] cns3xxx multiplatform support   Florian Fainelli
• [PATCH 3/3] ARM: at91: add MPA 1600 DT board   Nicolas Ferre
• [PATCH] genirq: allow an alternative setup for the mask cache   Thomas Gleixner
• [PATCH 4/4 v2] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Florian Fainelli
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Linus Walleij
• [Suggestion] Latest randconfig build errors for Head.S   Chen Gang F T
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Javier Martinez Canillas
• [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Arnd Bergmann
• [PATCH 0/5] cns3xxx multiplatform support   Gabor Juhos
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [Suggestion] Latest randconfig build errors for Head.S   Arnd Bergmann
• [PATCH 4/4 v2] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Thomas Petazzoni
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Russell King - ARM Linux
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Russell King - ARM Linux
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   David Miller
• [PATCH v3 03/11] clocksource: sp804: add device tree support   Russell King - ARM Linux
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Rajendra Nayak
• [PATCH 5/6] ARM: kill Hynix h720x platform   Thomas Petazzoni
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   Arnd Bergmann
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Ulf Hansson
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   David Miller
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Russell King - ARM Linux
• [PATCH v3 0/7] ARM: dts: omap: Add dts data for USB   Benoit Cousson
• [PATCH 0/8] ARM: dts: OMAP5: ocp address space and few updates   Benoit Cousson
• [PATCH 3/6] ARM: remove fa526 CPU support   Florian Fainelli
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support   Sergei Shtylyov
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   David Miller
• [PATCH 0/8] ARM: dts: OMAP5: ocp address space and few updates   Santosh Shilimkar
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   David Miller
• [PATCH 1/6] serial: 8250_dw: add support for clocks property when using DeviceTree   Heikki Krogerus
• [PATCH net-next] drivers:net: Remove dma_alloc_coherent OOM messages   David Miller
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Pawel Moll
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 0/4] mv643xx_eth: use mvmdio MDIO bus driver   David Miller
• [PATCH] ARM: davinci: da850 evm: update clock rate for UART 1/2 DT nodes   Manjunathappa, Prakash
• [PATCH] ARM: samsung: remove "config S3C_BOOT_WATCHDOG"   Paul Bolle
• [GIT PULL] at91: cleanup + soc for 3.10 #1   Nicolas Ferre
• [PATCH v3 0/7] ARM: dts: omap: Add dts data for USB   kishon
• [PATCH 2/6] ARM: gemini: remove platform support   Florian Fainelli
• [PATCH 3/6] ARM: remove fa526 CPU support   Arnd Bergmann
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   Arnd Bergmann
• DaVinci platform unable to boot via NFS   Prabhakar Lad
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Nishanth Menon
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates   Jon Hunter
• [PATCH V2 1/8] ARM: OMAP2+: Prepare for device-tree PMU support   Jon Hunter
• [PATCH V2 2/8] ARM: dts: OMAP2+: Add PMU nodes   Jon Hunter
• [PATCH V2 3/8] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes   Jon Hunter
• [PATCH V2 4/8] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5   Jon Hunter
• [PATCH V2 5/8] ARM: dts: Add OMAP2 gpio bindings   Jon Hunter
• [PATCH V2 6/8] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property   Jon Hunter
• [PATCH V2 7/8] ARM: dts: OMAP3: Add reg and interrupt properties for gpio   Jon Hunter
• [PATCH V2 8/8] ARM: dts: OMAP3: Add support for OMAP3430 SDP board   Jon Hunter
• [GIT PULL] i.MX fixes for -rc   Sascha Hauer
• [PATCH v2 05/14] ARM: integrator: use clocksource_of_init for sp804   Linus Walleij
• [PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree   Nishanth Menon
• DaVinci platform unable to boot via NFS   Sekhar Nori
• DaVinci platform unable to boot via NFS   Mugunthan V N
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Nishanth Menon
• [PATCH 8/8] cpufreq: omap: remove omap-cpufreq   Nishanth Menon
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Jon Hunter
• [RFC patch 00/11] cpuidle : ARM driver to rule them all   Daniel Lezcano
• [RFC patch 01/11] cpuidle : handle clockevent notify from the cpuidle framework   Daniel Lezcano
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Daniel Lezcano
• [RFC patch 03/11] cpuidle / ux500 : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 04/11] cpuidle / omap3 : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 05/11] cpuidle / davinci : use common ARM driver   Daniel Lezcano
• [RFC patch 06/11] cpuidle / at91 : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 07/11] cpuidle / shmobile : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 08/11] cpuidle / imx : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 09/11] cpuidle / s3c64xx : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 10/11] cpuidle / calxeda : use common ARM cpuidle driver   Daniel Lezcano
• [RFC patch 11/11] cpuidle / kirkwood : use common ARM cpuidle driver   Daniel Lezcano
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates   Benoit Cousson
• [GIT PULL] i.MX fixes for -rc   Arnd Bergmann
• [PATCH] ARM: davinci: da850 evm: update clock rate for UART 1/2 DT nodes   Sekhar Nori
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH] clk: vexpress: Add separate SP810 driver   Pawel Moll
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Arnd Bergmann
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   Laura Abbott
• Fwd: [PATCH] Turn off -Wmaybe-uninitialized when building with -Os   Arnd Bergmann
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Jon Hunter
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Jon Hunter
• [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver   Nishanth Menon
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   Sricharan R
• [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree   Nishanth Menon
• [PATCH 0/2] Device Tree support for CMA (Contiguous Memory Allocator)   Marek Szyprowski
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Daniel Lezcano
• [PATCH v6 0/2] ARM: davinci: add support for dm365 vpbe display   Prabhakar lad
• [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar lad
• [PATCH v6 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Prabhakar lad
• [PATCH V3 00/18] ARM: OMAP2+: GPMC clean-up and DT update   Jon Hunter
• [PATCH V3 01/18] ARM: OMAP2+: Simplify code configuring ONENAND devices   Jon Hunter
• [PATCH V3 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins   Jon Hunter
• [PATCH V3 03/18] ARM: OMAP2+: Add structure for storing GPMC settings   Jon Hunter
• [PATCH V3 04/18] ARM: OMAP2+: Add function for configuring GPMC settings   Jon Hunter
• [PATCH V3 05/18] ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V3 06/18] ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V3 07/18] ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V3 08/18] ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V3 09/18] ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()   Jon Hunter
• [PATCH V3 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Jon Hunter
• [PATCH V3 11/18] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• [PATCH V3 13/18] ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT   Jon Hunter
• [PATCH V3 14/18] ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT   Jon Hunter
• [PATCH V3 15/18] ARM: OMAP2+: Detect incorrectly aligned GPMC base address   Jon Hunter
• [PATCH V3 16/18] ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable   Jon Hunter
• [PATCH V3 17/18] ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails   Jon Hunter
• [PATCH V3 18/18] ARM: OMAP2+: return -ENODEV if GPMC child device creation fails   Jon Hunter
• [Linaro-mm-sig] [PATCH 2/2] drivers: dma-contiguous: add initialization from device tree   Marek Szyprowski
• [PATCH] MAINTAINERS: add maintainer entry for atmel i2c driver   ludovic.desroches at atmel.com
• [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow   Naveen Krishna Ch
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file   Naveen Krishna Ch
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [PATCH] MAINTAINERS: add maintainer entry for atmel i2c driver   Nicolas Ferre
• [PATCH 5/6] ARM: kill Hynix h720x platform   Arnd Bergmann
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Tony Lindgren
• [GIT PULL] ARM: omap2: twl-common update   Tony Lindgren
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Alan Stern
• [PATCH] genirq: allow an alternative setup for the mask cache   Gerlando Falauto
• [PATCH] [media] ir: IR_RX51 only works on OMAP2   Tony Lindgren
• [PATCH 0/2] Versatile Express fixes   Pawel Moll
• [PATCH 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Pawel Moll
• [PATCH 2/2] ARM: vexpress: Remove A9 compatible value for V2P-CA5s PMU node   Pawel Moll
• [PATCH 2/3] mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error   Samuel Ortiz
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Russell King - ARM Linux
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Russell King - ARM Linux
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Bryan Wu
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Russell King - ARM Linux
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Russell King - ARM Linux
• [PATCH 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Russell King - ARM Linux
• [PATCH v3] arm: fix a wrong value returned from CALLER_ADDRn   Russell King - ARM Linux
• [PATCH] ARM: tegra114: add speedo-based process identification   Stephen Warren
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Russell King - ARM Linux
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Nicolas Ferre
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Alan Stern
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   H Hartley Sweeten
• [RFC v2 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Russell King - ARM Linux
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Darrick J. Wong
• [PATCH] Turn off -Wmaybe-uninitialized when building with -Os   Russell King - ARM Linux
• [PATCH 3/4 v2] net: mvmdio: enhance driver to support SMI error/done interrupts   Russell King - ARM Linux
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Christoffer Dall
• [PATCH 0/8] memory: emif: miscellaneous bug fixes for EMIF driver   Greg KH
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804   Russell King - ARM Linux
• Fwd: [PATCH] Turn off -Wmaybe-uninitialized when building with -Os   Russell King - ARM Linux
• [PATCH v2 8/8] drivers: misc: use module_platform_driver_probe()   Greg Kroah-Hartman
• [PATCH 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Russell King - ARM Linux
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Stephen Warren
• [PATCH RFC 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Nicolas Schichan
• [PATCH RFC 3/3] ARM: net: bpf_jit: add support for jitted seccomp filters.   Nicolas Schichan
• [PATCH RFC 1/3] seccomp: add generic code for jitted seccomp filters.   Nicolas Schichan
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Laxman Dewangan
• [PATCH V3 5/5] ARM: tegra: add spi nodes to Tegra114 DT   Stephen Warren
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Laxman Dewangan
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Nicolas Pitre
• [PATCH V3 5/5] ARM: tegra: add spi nodes to Tegra114 DT   Laxman Dewangan
• [PATCH] ARM: tegra: fix register address of slink controller   Laxman Dewangan
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Stephen Warren
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Thierry Reding
• [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114   Laxman Dewangan
• [PATCH] ARM: tegra: fix register address of slink controller   Stephen Warren
• [PATCH v4] ARM: tegra: expose chip ID and revision   Stephen Warren
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Alan Stern
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Greg Kroah-Hartman
• [PATCH v2 0/2] refactoring for mask_cache   Gerlando Falauto
• [PATCH 1/2] genirq: cosmetic: remove cur_regs   Gerlando Falauto
• [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type   Gerlando Falauto
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Stephen Warren
• Fwd: [PATCH] Turn off -Wmaybe-uninitialized when building with -Os   Arnd Bergmann
• [PATCH 1/6] serial: 8250_dw: add support for clocks property when using DeviceTree   Maxime Ripard
• [RFC v2 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Stephen Warren
• [PATCH] genirq: allow an alternative setup for the mask cache   Thomas Gleixner
• [PATCHv3 0/6] Extend UART support for Allwinner SoCs   Maxime Ripard
• [PATCH 1/6] serial: 8250_dw: add support for clk api   Maxime Ripard
• [PATCH 2/6] ARM: sunxi: dt: Use clocks property instead of clock-frequency for the UARTs   Maxime Ripard
• [PATCH 3/6] ARM: sunxi: dt: Move uart0 to sun4i-a10.dtsi   Maxime Ripard
• [PATCH 4/6] ARM: sunxi: dt: Add uart3 dt node   Maxime Ripard
• [PATCH 5/6] ARM: sunxi: dt: Add A10 UARTs to the dtsi.   Maxime Ripard
• [PATCH 6/6] ARM: sunxi: hackberry: Add UART muxing   Maxime Ripard
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Florian Vaussard
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [PATCH] vfio: include <linux/slab.h> for kmalloc   Alex Williamson
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type   Thomas Gleixner
• [PATCH 0/5] ARM: sunxi: Add support for A10 Ethernet controller   Maxime Ripard
• [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's   Maxime Ripard
• [PATCH 2/5] ARM: sunxi: Add wemac to sun4i dtsi   Maxime Ripard
• [PATCH 3/5] ARM: sun4i: Add muxing options for the ethernet controller   Maxime Ripard
• [PATCH 4/5] ARM: cubieboard: Enable ethernet (WEMAC) support in dts   Maxime Ripard
• [PATCH 5/5] ARM: hackberry: dt: Add Ethernet controller to the Hackberry device tree   Maxime Ripard
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Stephen Warren
• [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's   Maxime Ripard
• [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep   Bryan Wu
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [GIT PULL] Device Tree fixes for v3.9   Arnd Bergmann
• [PATCH v2 0/2] refactoring for mask_cache   Andrew Lunn
• [RFC 0/3] arm: mxs: sanitize enet_out clock handling   Trent Piepho
• [GIT PULL] Nomadik multiplatform support for ARM SoC   Arnd Bergmann
• ep93xx irq-vic regression   H Hartley Sweeten
• [GIT PULL 0/5] Samsung changes-1 for v3.10   Arnd Bergmann
• [PATCH 4/6] ARM: sunxi: dt: Add uart3 dt node   Sergei Shtylyov
• [GIT PULL] clocksource cleanup for 3.10   Arnd Bergmann
• [GIT PULL] ARM: mvebu: DT changes for v3.10   Arnd Bergmann
• [GIT PULL][for 3.10] pull request from hi3xxx branch in pxa git tree   Arnd Bergmann
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Sergei Shtylyov
• [GIT PULL] at91: framebuffer enhancements for 3.10   Arnd Bergmann
• [GIT PULL] at91: cleanup + soc for 3.10 #1   Arnd Bergmann
• [GIT PULL] Device Tree fixes for v3.9   Arnd Bergmann
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Sergei Shtylyov
• [PATCH 1/6] serial: 8250_dw: add support for clk api   Russell King - ARM Linux
• ep93xx irq-vic regression   Ryan Mallon
• [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation   Darrick J. Wong
• [PATCH v2 0/2] refactoring for mask_cache   Simon Guinot
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Greg Kroah-Hartman
• [PATCH 1/6] serial: 8250_dw: add support for clk api   Emilio López
• ep93xx irq-vic regression   H Hartley Sweeten
• [PATCH 23/29] arm64: KVM: 32bit GP register access   Geoff Levand
• [PATCH 1/6] serial: 8250_dw: add support for clk api   Russell King - ARM Linux
• [PATCH 1/6] serial: 8250_dw: add support for clk api   Emilio López
• [PATCH 05/29] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Geoff Levand
• [PATCH 0/3] arm: ep93xx driver cleanup   H Hartley Sweeten
• [PATCH 06/29] arm64: KVM: fault injection into a guest   Geoff Levand
• [PATCH 0/3] arm: ep93xx driver cleanup   H Hartley Sweeten
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [RFC v2 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Bill Huang
• Getting kernel uImage build issue on omap2+   Anil Kumar
• [PATCH 0/8] memory: emif: miscellaneous bug fixes for EMIF driver   Lokesh Vutla
• [PATCH V2 0/8] memory: emif: miscellaneous bug fixes for EMIF driver   Lokesh Vutla
• [PATCH V2 1/8] memory: emif: Fix the lpmode timeout calculation   Lokesh Vutla
• [PATCH V2 2/8] memory: emif: setup LP settings on freq update   Lokesh Vutla
• [PATCH V2 3/8] memory: emif: handle overflow for timing for LP mode   Lokesh Vutla
• [PATCH V2 4/8] memory: emif: Handle devices which are not rated for >85C   Lokesh Vutla
• [PATCH V2 5/8] memory: emif: use restart if power_off not present when out of spec   Lokesh Vutla
• [PATCH V2 6/8] memory: emif: Fix the incorrect 'size' parameter in memcpy   Lokesh Vutla
• [PATCH V2 7/8] memory: emif: errata i743: Prohibit usage of Power-Down mode   Lokesh Vutla
• [PATCH V2 8/8] memory: emif: Load the correct custom config values from dt   Lokesh Vutla
• Fwd: [PATCH] Turn off -Wmaybe-uninitialized when building with -Os   James Bottomley
• Getting kernel uImage build issue on omap2+   Javier Martinez Canillas
• [PATCH v5 0/2] ARM: davinci: dm355: add support for vpbe display   Prabhakar lad
• [PATCH v5 1/2] ARM: davinci: dm355: add support for v4l2 video display   Prabhakar lad
• [PATCH v5 2/2] ARM: davinci: dm355 EVM: add support for VPBE display   Prabhakar lad
• Getting kernel uImage build issue on omap2+   Anil Kumar
• [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array   Sebastian Hesselbarth
• [PATCH] clk: let mxs specific clk-div clock type be a generic clock type   Thomas Abraham
• [PATCH] clk: add DT test clock consumer driver   Sebastian Hesselbarth
• [PATCH v2] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• ep93xx irq-vic regression   Florian Fainelli
• [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's   Florian Fainelli
• Re: [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's   Alexander Shiyan
• [PATCH] clk: add DT test clock consumer driver   Arnd Bergmann
• [PATCH v2] clk: add si5351 i2c common clock driver   Daniel Mack
• [PATCH] ARM: imx1: mm: add call to mxc_device_init   Gwenhael Goavec-Merou
• [PATCH] ARM: imx: apf51dev: add ecspi1, ecspi2 and i2c2 support   Gwenhael Goavec-Merou
• [PATCH 0/5] cns3xxx multiplatform support   Anton Vorontsov
• [PATCH v2, part3 02/12] mm/ARM64: kill poison_init_mem()   Jiang Liu
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• Shifted framebuffer after X11 starts on mx28   Fabio Estevam
• Kirkwood NSA 310 does not boot with 3.8.3   Lukas Zapletal
• Shifted framebuffer after X11 starts on mx28   Marek Vasut
• [PATCH V3 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins   Ezequiel Garcia
• Shifted framebuffer after X11 starts on mx28   Marek Vasut
• Kirkwood NSA 310 does not boot with 3.8.3   Jason Cooper
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Fabio Estevam
• ep93xx irq-vic regression   Ryan Mallon
• Anyone implement Cortex A9 FIQ   Frank Li
• [Suggestion] Latest randconfig build errors for Head.S   Chen Gang F T
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Sricharan R
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Sricharan R
• [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.   Anil Kumar
• [PATCH V3 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Ezequiel Garcia
• [PATCH V3 00/18] ARM: OMAP2+: GPMC clean-up and DT update   Ezequiel Garcia
• [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates   Anil Kumar
• [PATCH v3 0/6] move s3c24xx-irq to drivers/irqchip and add dt support   Heiko Stübner
• [PATCH v3 1/6] ARM: S3C24XX: move irq driver to drivers/irqchip   Heiko Stübner
• [PATCH v3 2/6] irqchip: s3c24xx: fix comments on some camera interrupts   Heiko Stübner
• [PATCH v3 3/6] irqchip: s3c24xx: fix irqlist of second s3c2416 controller   Heiko Stübner
• [PATCH v3 4/6] irqchip: s3c24xx: use irq_create_mapping for parent irqs   Heiko Stübner
• [PATCH v3 5/6] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Heiko Stübner
• [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Will Deacon
• [PATCH 1/3] ARM: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n   Will Deacon
• [PATCH 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register   Will Deacon
• [Suggestion] Latest randconfig build errors for CONFIG_MMU=no   Will Deacon
• ep93xx irq-vic regression   Florian Fainelli
• [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Jonas Jensen
• [PATCH v3 1/7] ARM: shmobile: Define DT bindings for timer devices   Bastian Hecht
• [PATCH v3 2/7] clocksource: sh_cmt: Add OF support   Bastian Hecht
• [PATCH v3 3/7] clocksource: sh_tmu: Add OF support   Bastian Hecht
• [PATCH v3 4/7] ARM: shmobile: sh73a0: Add timer DT names to clock list   Bastian Hecht
• [PATCH v3 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH v3 6/7] ARM: shmobile: r8a7740: Add DT name to clock list for CMT10   Bastian Hecht
• [PATCH v3 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT   Bastian Hecht
• [PATCH] ethernet/tulip: DE4x5 needs VIRT_TO_BUS   David Miller
• [PATCH] isdn: hisax: netjet requires VIRT_TO_BUS   David Miller
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Pavel Machek
• [PATCH 0/4] Add SD support for PXA168 & gplugD   Tanmay Upadhyay
• [PATCH 1/4] mmc: sdhci-pxa: Trivial fix in Kconfig   Tanmay Upadhyay
• [PATCHv1 1/2] ARM: socfpga: Enable hotplug and soft reset   Pavel Machek
• [PATCH v6 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH v2 3/4] mmc: sdhci-pxa: Add SDHCI driver for PXA16x   Tanmay Upadhyay
• [PATCH v2 4/4] ARM: pxa168/gplugd: Add support for SD port 1   Tanmay Upadhyay
• [PATCHv1 2/2] ARM: socfpga: Add clock entries into device tree   Pavel Machek
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Jason Cooper
• Linux 3.8.3   Felipe Balbi
• [RFC PATCH 1/8] s5p-fimc: Add Exynos4x12 FIMC-IS driver   Sylwester Nawrocki
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Christoffer Dall
• Linux 3.8.3   Russell King - ARM Linux
• [PATCH 1/4] mtd: merge mtdchar module with mtdcore   Shmulik Ladkani
• Linux 3.8.3   Bjørn Mork
• [GIT PULL 3/3] ARM: mvebu: soc for v3.10   Jason Cooper
• [GIT PULL 2/3] ARM: mvebu: drivers for v3.10   Jason Cooper
• [GIT PULL 1/3] ARM: mvebu: cleanup for v3.10   Jason Cooper
• [GIT PULL 0/3] ARM: mvebu: changes for v3.10   Jason Cooper
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Jason Cooper
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Andrew Lunn
• [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error   Mike Turquette
• [RFC PATCH 5/8] s5p-fimc: Add ISP video capture driver stubs   Sylwester Nawrocki
• [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error   Arnd Bergmann
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• [PATCH v2, part3 02/12] mm/ARM64: kill poison_init_mem()   Will Deacon
• [GIT PULL 3/3] ARM: mvebu: soc for v3.10   Gregory CLEMENT
• [PATCH v3 5/6] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH 3.9-rc1] clk: vt8500: Fix variable name '*prate' compile error   Mike Turquette
• [GIT PULL 3/3] ARM: mvebu: soc for v3.10   Jason Cooper
• [PATCH v2 4/4] ARM: pxa168/gplugd: Add support for SD port 1   Haojian Zhuang
• [PATCH v6 2/4] ARM: pxa168: Add SDHCI support   Haojian Zhuang
• [Suggestion] Latest randconfig build errors for CONFIG_MMU=no   Chen Gang
• mmap sync issue   Hugh Dickins
• [PATCH -next] pinctrl: sirf: using for_each_set_bit to simplify the code   Barry Song
• Linux 3.8.3   Greg KH
• [PATCH v2 6/8] drivers: mfd: use module_platform_driver_probe()   Jingoo Han
• [PATCH v2 2/8] drivers: ata: use module_platform_driver_probe()   Jingoo Han
• linux-next: manual merge of the arm-soc tree with Linus' tree   Stephen Rothwell
• linux-next: manual merge of the bcm2835 tree with the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the bcm2835 tree with the arm-soc tree   Stephen Rothwell
• [PATCH v6 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• linux-next: manual merge of the tegra tree with the arm-soc tree   Stephen Rothwell
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Sricharan R
• [PATCH] ARM: tegra114: add speedo-based process identification   Danny Huang
• [RFC 0/3] arm: mxs: sanitize enet_out clock handling   Shawn Guo
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Santosh Shilimkar
• [PATCH 14/14] usb: udc-core: add judgement logic for usb_gadget_connect   Peter Chen
• [PATCH 0/2] arm: prima2: add support for CSR SiRFatlas6 SoC   Barry Song
• [PATCH 1/2] arm: prima2: add new SiRFatlas6 machine in common board   Barry Song
• [PATCH 2/2] ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board   Barry Song
• [PATCH 6/6] mtd: remove h720x flash support   Artem Bityutskiy
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Barry Song
• [PATCH] spi: sirf: fix the issue while transferring more than 256 words   Barry Song
• [PATCH 0/6] remove the clock name from pdata   Chao Xie
• [PATCH 1/6] usb: gadget: mv_udc_core: remove unused clock   Chao Xie
• [PATCH 2/6] usb: otg: mv_otg: remove unused clock   Chao Xie
• [PATCH 3/6] usb: ehci: mv_ehci: remove unused clock   Chao Xie
• [PATCH 4/6] arm: mmp: remove clock from usb pdata for aspenite   Chao Xie
• [PATCH 5/6] arm: mmp: remove clock name from usb pdata for ttc   Chao Xie
• [PATCH 6/6] usb: mv_usb: remove clock name from pdata   Chao Xie
• [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type   Gerlando Falauto
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Sourav Poddar
• [PATCH V2 0/3] ARM: tegra: add clock source for PMC   Joseph Lo
• [PATCH V2 1/3] ARM: dts: tegra: add clock source for PMC   Joseph Lo
• [PATCH V2 2/3] ARM: tegra: get PMC clock source from DT   Joseph Lo
• [PATCH V2 3/3] ARM: tegra: moving the CPU power timer function to PMC driver   Joseph Lo
• [PATCH V4 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [PATCH V4 1/9] gpio: tegra: add gpio wakeup source handling   Joseph Lo
• [PATCH V4 2/9] ARM: tegra: irq: add wake up handling   Joseph Lo
• [PATCH V4 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Joseph Lo
• [PATCH V4 4/9] ARM: tegra: pm: add platform suspend support   Joseph Lo
• [PATCH V4 5/9] ARM: dts: tegra: add power gpio keys to DT   Joseph Lo
• [PATCH V4 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC   Joseph Lo
• [PATCH V4 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC   Joseph Lo
• [PATCH V4 8/9] ARM: tegra: config: defconfig update   Joseph Lo
• [PATCH V4 9/9] ARM: dts: tegra: add the PM configurations of PMC   Joseph Lo
• [PATCH V2] ARM: tegra: cpuidle: remove redundant parameters for powered-down mode   Joseph Lo
• [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Rajendra Nayak
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Barry Song
• [PATCH v2 0/4] ARM: mxs: sanitize enet_out clock handling   Shawn Guo
• [PATCH v2 1/4] net: fec: handle optional clk_ptp more gracefully   Shawn Guo
• [PATCH v2 2/4] net: freescale: fec: add support for optional enet_out clk   Shawn Guo
• [PATCH v2 3/4] ARM: dts: mxs: add enet_out clock to devicetree   Shawn Guo
• [PATCH v2 4/4] ARM: mxs: remove unneeded enet_out clk initialization   Shawn Guo
• [PATCH] dmaengine:sirf:take clock and enable it while probing   Barry Song
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Sourav Poddar
• [PATCH v5 1/2] ARM: davinci: dm355: add support for v4l2 video display   Sekhar Nori
• [PATCH] clk: let mxs specific clk-div clock type be a generic clock type   Shawn Guo
• [PATCH] ARM: imx: apf51dev: add ecspi1, ecspi2 and i2c2 support   Shawn Guo
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Barry Song
• [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type   Thomas Gleixner
• [PATCH v5 1/2] ARM: davinci: dm355: add support for v4l2 video display   Prabhakar Lad
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Barry Song
• [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar Lad
• Kirkwood NSA 310 does not boot with 3.8.3   Lukas Zapletal
• some question about monitor mode support in arm   loody
• [PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates   Benoit Cousson
• [PATCH] clk: let mxs specific clk-div clock type be a generic clock type   Thomas Abraham
• [PATCH 3/6] ARM: remove fa526 CPU support   Jonas Jensen
• [PATCH] clk: let mxs specific clk-div clock type be a generic clock type   Uwe Kleine-König
• [GIT PULL] Renesas ARM-based SoC fixes for v3.9   Simon Horman
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Ulf Hansson
• [PATCH 3/6] usb: ehci: mv_ehci: remove unused clock   Sergei Shtylyov
• [PATCH v3] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Russell King - ARM Linux
• [PATCH V6] ARM: LPAE: Fix mapping in alloc_init_section for unaligned addresses   Sricharan R
• [PATCH] clk: vexpress: Add separate SP810 driver   Catalin Marinas
• [PATCH 0/2] omap serial fix.   Sourav Poddar
• [PATCH 1/2] driver: serial-omap: move max uart count into generic header file.   Sourav Poddar
• [PATCH 2/2] arm: mach-omap2: prevent UART console idle on suspend while using "no_console_suspend"   Sourav Poddar
• [GIT PULL] Renesas ARM-based SoC fixes for v3.9   Arnd Bergmann
• [PATCH V4 1/4] cpufreq: exynos: Adding cpufreq driver for exynos5440   amit kachhap
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH] ARM: ux500: select WATCHDOG and MUSB for ux500   Fabio Baltieri
• [GIT PULL] Renesas ARM and SH based SoC pinmux update for v3.10   Simon Horman
• [PATCH 001/142] sh-pfc: Declare operation structures as const   Simon Horman
• [PATCH 002/142] sh-pfc: Don't define the per-device pinctrl struct instances as global   Simon Horman
• [PATCH 003/142] sh-pfc: Fix a typo and simplify a definition on sh73a0   Simon Horman
• [PATCH 004/142] sh-pfc: Drop the sh_pfc_pinctrl spinlock   Simon Horman
• [PATCH 005/142] sh-pfc: Don't take the sh_pfc spinlock in sh_pfc_map_gpios()   Simon Horman
• [PATCH 007/142] sh-pfc: Replace first_gpio and last_gpio with nr_gpios   Simon Horman
• [PATCH 008/142] sh-pfc: Replace SoC info data and mark ranges with a number of pins   Simon Horman
• [PATCH 009/142] sh-pfc: Remove unused sh_pfc_soc_info reserved_id field   Simon Horman
• [PATCH 010/142] sh-pfc: Initialize pinmux_gpio flags statically   Simon Horman
• [PATCH 011/142] sh-pfc: Make struct pinmux_gpio enum_id field const   Simon Horman
• [PATCH 012/142] sh-pfc: Shrink the pinctrl GPIO range to include real GPIOs only   Simon Horman
• [PATCH] genirq: allow an alternative setup for the mask cache   Gerlando Falauto
• [PATCH 013/142] sh-pfc: Don't needlessly check GPIO type in sh_gpio_free()   Simon Horman
• [PATCH 014/142] sh-pfc: Split pins and functions definition tables   Simon Horman
• [PATCH 015/142] sh-pfc: Split pins and functions into separate gpio_chip instances   Simon Horman
• [PATCH 016/142] sh-pfc: Rename struct pinmux_pin to struct sh_pfc_pin   Simon Horman
• [PATCH 017/142] sh-pfc: Look up IRQ table entries by GPIO number   Simon Horman
• [PATCH 018/142] sh-pfc: Share the PORT_10_REV, PORT_32 and PORT_32_REV definitions   Simon Horman
• [PATCH 019/142] sh-pfc: Use pinmux identifiers in the pin muxing API   Simon Horman
• [PATCH 020/142] sh-pfc: Simplify the sh_pfc_gpio_is_pin() logic   Simon Horman
• [PATCH 021/142] sh-pfc: Add function to retrieve a pin instance from its pin number   Simon Horman
• [PATCH 022/142] sh-pfc: Replace pinctrl_add_gpio_range() with gpiochip_add_pin_range()   Simon Horman
• [PATCH 023/142] sh-pfc: Add support for sparse pin numbers   Simon Horman
• [PATCH 024/142] ARM: shmobile: sh73a0: Support sparse GPIO numbers   Simon Horman
• [PATCH 025/142] ARM: shmobile: ap4-evb: Replace GPIO_PORTx enum with GPIO port numbers   Simon Horman
• [PATCH 026/142] ARM: shmobile: armadillo: Replace GPIO_PORTx enum with GPIO port numbers   Simon Horman
• [PATCH 027/142] ARM: shmobile: bonito: Replace GPIO_PORTx enum with GPIO port numbers   Simon Horman
• [PATCH 028/142] ARM: shmobile: mackerel: Replace GPIO_PORTx enum with GPIO port numbers   Simon Horman
• [PATCH 029/142] sh-pfc: Expose real groups and functions in pinctrl/pinmux operations   Simon Horman
• [PATCH 030/142] sh: sh7203: Add pin control resources   Simon Horman
• [PATCH 031/142] sh: sh7264: Add pin control resources   Simon Horman
• [PATCH 032/142] sh: sh7269: Add pin control resources   Simon Horman
• [PATCH 033/142] sh: sh7720: Add pin control resources   Simon Horman
• [PATCH 034/142] sh: sh7722: Add pin control resources   Simon Horman
• [PATCH 035/142] sh: sh7723: Add pin control resources   Simon Horman
• [PATCH 036/142] sh: sh7724: Add pin control resources   Simon Horman
• [PATCH 037/142] sh: sh7757: Add pin control resources   Simon Horman
• [PATCH 038/142] sh: sh7785: Add pin control resources   Simon Horman
• [PATCH 039/142] sh: sh7786: Add pin control resources   Simon Horman
• [PATCH 040/142] sh: shx3: Add pin control resources   Simon Horman
• [PATCH 041/142] sh-pfc: Fix return value check in sh_pfc_register_pinctrl()   Simon Horman
• [PATCH 042/142] sh-pfc: Move GPIO registers access functions to gpio.c   Simon Horman
• [PATCH 043/142] sh-pfc: Don't map data registers individually   Simon Horman
• [PATCH 044/142] sh-pfc: Drop unused support for 1:1 physical to virtual memory mappings   Simon Horman
• [PATCH 045/142] sh-pfc: Don't modify pinmux_data_reg SoC data   Simon Horman
• [PATCH 046/142] sh-pfc: Don't modify sh_pfc_pin SoC data   Simon Horman
• [PATCH 047/142] sh-pfc: Remove configuration dry-run and free   Simon Horman
• [PATCH 048/142] sh-pfc: Constify all SoC data   Simon Horman
• [PATCH 049/142] sh-pfc: Use proper error codes   Simon Horman
• [PATCH 050/142] sh-pfc: Implement generic pinconf support   Simon Horman
• [PATCH 051/142] sh-pfc: Merge sh_pfc_reconfig_pin() into sh_pfc_gpio_set_direction()   Simon Horman
• [PATCH 052/142] sh-pfc: Clean up pin configuration type handling   Simon Horman
• [PATCH 053/142] sh-pfc: Convert message printing from pr_* to dev_*   Simon Horman
• [PATCH 054/142] sh-pfc: Return an error if a pin doesn't support the requested direction   Simon Horman
• [PATCH 055/142] sh-pfc: sh7372: Add SDHCI and MMCIF pin groups and functions   Simon Horman
• [PATCH 056/142] sh-pfc: sh73a0: Add bias (pull-up/down) pinconf support   Simon Horman
• [PATCH 057/142] sh-pfc: sh73a0: Add LCD and LCD2 pin groups and functions   Simon Horman
• [PATCH 058/142] sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions   Simon Horman
• [PATCH 059/142] sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions   Simon Horman
• [PATCH 060/142] sh-pfc: sh73a0: Add FSI pin groups and functions   Simon Horman
• [PATCH 061/142] sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions   Simon Horman
• [PATCH 062/142] sh-pfc: sh73a0: Add KEYSC pin groups and functions   Simon Horman
• [PATCH 063/142] sh-pfc: sh73a0: Add BSC pin groups and functions   Simon Horman
• [PATCH 064/142] sh-pfc: sh73a0: Add USB pin groups and functions   Simon Horman
• [PATCH 065/142] sh-pfc: sh73a0: Add IrDA pin groups and functions   Simon Horman
• [PATCH 066/142] sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions   Simon Horman
• [PATCH 067/142] sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions   Simon Horman
• [PATCH 068/142] sh-pfc: r8a7779: Add DU pin groups and functions   Simon Horman
• [PATCH 069/142] sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions   Simon Horman
• [PATCH 070/142] sh-pfc: r8a7779: Add SCIF pin groups and functions   Simon Horman
• [PATCH 071/142] sh-pfc: r8a7779: Add HSPI pin groups and functions   Simon Horman
• [PATCH 072/142] sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support   Simon Horman
• [PATCH 073/142] sh-pfc: r8a7779: Add USB pin groups and functions   Simon Horman
• [PATCH 074/142] sh-pfc: r8a7779: Add LBSC pin groups and functions   Simon Horman
• [PATCH 075/142] sh-pfc: r8a7779: Add INTC pin groups and functions   Simon Horman
• [PATCH 076/142] ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF   Simon Horman
• [PATCH 077/142] ARM: shmobile: ag5evm: Register pinctrl mappings for I2C   Simon Horman
• [PATCH 078/142] ARM: shmobile: ag5evm: Register pinctrl mappings for FSI   Simon Horman
• [PATCH 079/142] ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 080/142] ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC   Simon Horman
• [PATCH 081/142] ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA   Simon Horman
• [PATCH 082/142] ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 083/142] ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0   Simon Horman
• [PATCH 084/142] ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 085/142] ARM: shmobile: bonito: Register pinctrl mappings for LCDC0   Simon Horman
• [PATCH 086/142] ARM: shmobile: kota2: Register pinctrl mappings for SCIF   Simon Horman
• [PATCH 087/142] ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 088/142] ARM: shmobile: kota2: Register pinctrl mappings for KEYSC   Simon Horman
• [PATCH 089/142] ARM: shmobile: kota2: Register pinctrl mappings for BSC   Simon Horman
• [PATCH 090/142] ARM: shmobile: kzm9g: Register pinctrl mappings for LCD   Simon Horman
• [PATCH 091/142] ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF   Simon Horman
• [PATCH 092/142] ARM: shmobile: kzm9g: Register pinctrl mappings for I2C   Simon Horman
• [PATCH 093/142] ARM: shmobile: kzm9g: Register pinctrl mappings for FSI   Simon Horman
• [PATCH 094/142] ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 095/142] ARM: shmobile: kzm9g: Register pinctrl mappings for BSC   Simon Horman
• [PATCH 096/142] ARM: shmobile: kzm9g: Register pinctrl mappings for USB   Simon Horman
• [PATCH 097/142] ARM: shmobile: mackerel: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 098/142] ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF   Simon Horman
• [PATCH 099/142] ARM: shmobile: marzen: Register pinctrl mappings for SCIF   Simon Horman
• [PATCH 100/142] ARM: shmobile: marzen: Register pinctrl mappings for HSPI   Simon Horman
• [PATCH 101/142] ARM: shmobile: marzen: Register pinctrl mappings for USB   Simon Horman
• [PATCH 102/142] ARM: shmobile: marzen: Register pinctrl mappings for LBSC   Simon Horman
• [PATCH 103/142] ARM: shmobile: marzen: Register pinctrl mappings for INTC   Simon Horman
• [PATCH 104/142] sh-pfc: sh7372: Remove SDHI and MMCIF function GPIOS   Simon Horman
• [PATCH 105/142] sh-pfc: sh73a0: Remove LCD and LCD2 function GPIOS   Simon Horman
• [PATCH 106/142] sh-pfc: sh73a0: Remove SCIFA and SCIFB function GPIOS   Simon Horman
• [PATCH 107/142] sh-pfc: sh73a0: Remove I2C function GPIOS   Simon Horman
• [PATCH 108/142] sh-pfc: sh73a0: Remove FSI function GPIOS   Simon Horman
• [PATCH 109/142] sh-pfc: sh73a0: Remove pull-up function GPIOS   Simon Horman
• [PATCH 110/142] sh-pfc: sh73a0: Remove KEYSC function GPIOS   Simon Horman
• [PATCH 111/142] sh-pfc: sh73a0: Remove BSC function GPIOS   Simon Horman
• [PATCH 112/142] sh-pfc: sh73a0: Remove USB function GPIOS   Simon Horman
• [PATCH 113/142] sh-pfc: sh73a0: Remove IrDA function GPIOS   Simon Horman
• [PATCH 114/142] sh-pfc: r8a7740: Remove LCD0 and LCD1 function GPIOS   Simon Horman
• [PATCH 115/142] sh-pfc: r8a7740: Remove SDHI and MMCIF function GPIOS   Simon Horman
• [PATCH 116/142] sh-pfc: r8a7779: Remove DU1_DOTCLKOUT1 GPIO   Simon Horman
• [PATCH 117/142] sh-pfc: r8a7779: Remove SDHI and MMCIF function GPIOS   Simon Horman
• [PATCH 118/142] sh-pfc: r8a7779: Remove SCIF function GPIOS   Simon Horman
• [PATCH 119/142] sh-pfc: r8a7779: Remove HSPI function GPIOS   Simon Horman
• [PATCH 120/142] sh-pfc: r8a7779: Remove USB function GPIOS   Simon Horman
• [PATCH 121/142] sh-pfc: r8a7779: Remove LBSC function GPIOS   Simon Horman
• [PATCH 122/142] sh-pfc: r8a7779: Remove INTC function GPIOS   Simon Horman
• [PATCH 123/142] ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs   Simon Horman
• [PATCH 124/142] ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs   Simon Horman
• [PATCH 125/142] ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs   Simon Horman
• [PATCH 126/142] ARM: shmobile: sh73a0: Remove I2C function GPIOs   Simon Horman
• [PATCH 127/142] ARM: shmobile: sh73a0: Remove FSI function GPIOs   Simon Horman
• [PATCH 128/142] ARM: shmobile: sh73a0: Remove pull-up function GPIOS   Simon Horman
• [PATCH 129/142] ARM: shmobile: sh73a0: Remove KEYSC function GPIOs   Simon Horman
• [PATCH 130/142] ARM: shmobile: sh73a0: Remove BSC function GPIOs   Simon Horman
• [PATCH 131/142] ARM: shmobile: sh73a0: Remove USB function GPIOs   Simon Horman
• [PATCH 132/142] ARM: shmobile: sh73a0: Remove IrDA function GPIOs   Simon Horman
• [PATCH 133/142] ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs   Simon Horman
• [PATCH 134/142] ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs   Simon Horman
• [PATCH 135/142] ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO   Simon Horman
• [PATCH 136/142] ARM: shmobile: r8a7779: Remove DU function GPIOs   Simon Horman
• [PATCH 137/142] ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs   Simon Horman
• [PATCH 138/142] ARM: shmobile: r8a7779: Remove SCIF function GPIOs   Simon Horman
• [PATCH 139/142] ARM: shmobile: r8a7779: Remove HSPI function GPIOs   Simon Horman
• [PATCH 140/142] ARM: shmobile: r8a7779: Remove USB function GPIOs   Simon Horman
• [PATCH 141/142] ARM: shmobile: r8a7779: Remove LBSC function GPIOs   Simon Horman
• [PATCH 142/142] ARM: shmobile: r8a7779: Remove INTC function GPIOs   Simon Horman
• [PATCH 3/6] ARM: remove fa526 CPU support   Arnd Bergmann
• Kirkwood NSA 310 does not boot with 3.8.3   Jason Cooper
• [PATCH v2] ARM: tegra114: add speedo-based process identification   Danny Huang
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH 3/6] ARM: remove fa526 CPU support   Florian Fainelli
• [PATCH v3] clk: add si5351 i2c common clock driver   Daniel Mack
• [GIT PULL] Renesas ARM-based SoC updates for v3.10   Simon Horman
• [PATCH 01/43] ARM: shmobile: Remove unused headers from hotplug.c   Simon Horman
• [PATCH 02/43] ARM: shmobile: Remove partial CPU Hotplug from EMEV2   Simon Horman
• [PATCH 03/43] ARM: shmobile: Move EMEV2 CPU boot vector setup code   Simon Horman
• [PATCH 04/43] ARM: shmobile: Remove sh73a0_get_core_count()   Simon Horman
• [PATCH 05/43] ARM: shmobile: Remove r8a7779_get_core_count()   Simon Horman
• [PATCH 06/43] ARM: shmobile: Remove emev2_get_core_count()   Simon Horman
• [PATCH 07/43] ARM: shmobile: add MMCIF and SDHI DT clock aliases to sh73a0 and r8a7740   Simon Horman
• [PATCH 08/43] ARM: mach-shmobile: r8a7779: Allow initialisation of GIC by DT   Simon Horman
• [PATCH 09/43] ARM: mach-shmobile: r8a7779: Minimal setup using DT   Simon Horman
• [PATCH 10/43] ARM: shmobile: Kill off sh73a0 scu_base_addr() function   Simon Horman
• [PATCH 11/43] ARM: shmobile: Kill off r8a7779 scu_base_addr() function   Simon Horman
• [PATCH 12/43] ARM: shmobile: Rework EMEV2 scu_base variable   Simon Horman
• [PATCH 13/43] ARM: shmobile: Move headsmp-sh73a0.S to headsmp-scu.S   Simon Horman
• [PATCH 14/43] ARM: shmobile: Common shmobile_scu_base in headsmp-scu.S   Simon Horman
• [PATCH 15/43] ARM: shmobile: Update EMEV2 to use scu_power_mode()   Simon Horman
• [PATCH 16/43] ARM: shmobile: Make EMEV2 setup functions static   Simon Horman
• [PATCH 17/43] ARM: shmobile: sh73a0: fix Z and ZG clock hierarchy   Simon Horman
• [PATCH 18/43] ARM: shmobile: sh73a0: Remove sh73a0_init_irq_dt()   Simon Horman
• [PATCH 19/43] ARM: shmobile: sh73a0: Add smp ops to DT_MACHINE_START   Simon Horman
• [PATCH 20/43] ARM: shmobile: sh73a0: Remove warning about SMP   Simon Horman
• [PATCH 21/43] ARM: shmobile: sh73a0: Do not use early devices with DT reference   Simon Horman
• [PATCH 22/43] ARM: shmobile: r8a7779: Do not use early devices with DT reference   Simon Horman
• [PATCH 23/43] ARM: shmobile: r8a7779: Do not initialise i2c as an early device   Simon Horman
• [PATCH 24/43] ARM: shmobile: r8a7779: Remove lan from dtsi   Simon Horman
• [PATCH 25/43] ARM: shmobile: Fix base address readout in headsmp-scu.S   Simon Horman
• [PATCH 26/43] ARM: shmobile: Rework SH73A0_SCU_BASE IOMEM() usage   Simon Horman
• [PATCH 27/43] ARM: shmobile: Use R8A7779_SCU_BASE with TWD   Simon Horman
• [PATCH 28/43] ARM: shmobile: Update r8a7779 to check SCU for hotplug   Simon Horman
• [PATCH 29/43] ARM: shmobile: Update r8a7779 to use scu_power_mode()   Simon Horman
• [PATCH 30/43] ARM: shmobile: Use sh73a0-specific cpu disable code   Simon Horman
• [PATCH 31/43] ARM: shmobile: Rearrange r8a7779 cpu hotplug code   Simon Horman
• [PATCH 32/43] ARM: shmobile: Remove unused hotplug.c   Simon Horman
• [PATCH 33/43] ARM: mach-shmobile: r8a7740: Add DT names to clock list   Simon Horman
• [PATCH 34/43] ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID   Simon Horman
• [PATCH 35/43] ARM: shmobile: r8a7779: fixup dtsi typo   Simon Horman
• [PATCH 36/43] ARM: shmobile: r8a7779: fixup DT machine name   Simon Horman
• [PATCH 37/43] ARM: shmobile: r8a7779: use gic_iid macro   Simon Horman
• [PATCH 38/43] ARM: shmobile: tidyup chip series definition order for r8a7740/r8a7779   Simon Horman
• [PATCH 39/43] ARM: shmobile: r8a7779: add Thermal support on DT   Simon Horman
• [PATCH 40/43] ARM: mach-shmobile: r8a7779: SATA DT configuration   Simon Horman
• [PATCH 41/43] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [PATCH 42/43] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource   Simon Horman
• [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage   Simon Horman
• [GIT PULL] Renesas ARM-based SoC defconfig updates for v3.10   Simon Horman
• [PATCH 1/9] ARM: mach-shmobile: mackerel: enable MMCIF and SDHI in defconfig   Simon Horman
• [PATCH 2/9] ARM: mach-shmobile: mackerel: enable REGULATOR in defconfig   Simon Horman
• [PATCH 3/9] ARM: mach-shmobile: armadillo800eva: enable REGULATOR in defconfig   Simon Horman
• [PATCH 4/9] ARM: shmobile: kzm9g: defconfig: do not enable PREEMPT   Simon Horman
• [PATCH 5/9] ARM: shmobile: armadillo800eva: enable branch prediction on defconfig   Simon Horman
• [PATCH 6/9] ARM: shmobile: armadillo800eva: enable NEON on defconfig   Simon Horman
• [PATCH 7/9] ARM: mach-shmobile: kzm9g: do not enable REGULATOR_DUMMY in defconfig   Simon Horman
• [PATCH 8/9] ARM: shmobile: armadillo800eva: enable all errata for cache on defconfig   Simon Horman
• [PATCH 9/9] ARM: mach-shmobile: marzen: add SATA support   Simon Horman
• [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage   Guennadi Liakhovetski
• [GIT PULL] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [PATCH 01/13] ARM: shmobile: use GPIO SD-card detection on armadillo800eva   Simon Horman
• [PATCH 02/13] ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva   Simon Horman
• [PATCH 03/13] ARM: shmobile: streamline mackerel SD and MMC devices   Simon Horman
• [PATCH 04/13] ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused   Simon Horman
• [PATCH 05/13] ARM: shmobile: marzen: Reference DT implementation   Simon Horman
• [PATCH 06/13] ARM: shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 07/13] ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference   Simon Horman
• [PATCH 08/13] ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference   Simon Horman
• [PATCH 09/13] ARM: shmobile: simplify kzm9g Kconfig dependencies   Simon Horman
• [PATCH 10/13] ARM: shmobile: kzm9g: Remove warning about SMP   Simon Horman
• [PATCH 11/13] ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START   Simon Horman
• [PATCH 12/13] ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID   Simon Horman
• [PATCH 13/13] ARM: shmobile: kzm9g: correct smsc regulator registration   Simon Horman
• [GIT PULL] Renesas INTC External IRQ pin driver   Simon Horman
• [PATCH 01/14] irqchip: Renesas INTC External IRQ pin driver   Simon Horman
• [PATCH 02/14] ARM: shmobile: irq_pin() for static IRQ pin assignment   Simon Horman
• [PATCH 03/14] ARM: shmobile: INTC External IRQ pin driver on sh73a0   Simon Horman
• [PATCH 04/14] ARM: shmobile: INTC External IRQ pin driver on r8a7779   Simon Horman
• [PATCH 05/14] irqchip: intc-irqpin: Whitespace fixes   Simon Horman
• [PATCH 06/14] irqchip: intc-irqpin: Cache mapped IRQ   Simon Horman
• [PATCH 07/14] irqchip: intc-irqpin: Add force comments   Simon Horman
• [PATCH 08/14] irqchip: intc-irqpin: Make use of devm functions   Simon Horman
• [PATCH 09/14] irqchip: intc-irqpin: GPL header for platform data   Simon Horman
• [PATCH 10/14] irqchip: Renesas IRQC driver   Simon Horman
• [PATCH 11/14] ARM: shmobile: Make sh73a0 INTC irqpin platform data static   Simon Horman
• [PATCH 12/14] ARM: shmobile: Make r8a7779 INTC irqpin platform data static   Simon Horman
• [PATCH 13/14] irqchip: intc-irqpin: Initial DT support   Simon Horman
• [PATCH 14/14] irqchip: irqc: Add DT support   Simon Horman
• [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage   Simon Horman
• [GIT PULL] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [GIT PULL] Renesas ARM-based SoC updates for v3.10   Simon Horman
• [PATCH 43/43] ARM: shmobile: fix kzm9g-reference compile breakage   Simon Horman
• [GIT PULL] Renesas INTC External IRQ pin driver   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC updates for v3.10   Simon Horman
• [PATCH 01/43] ARM: shmobile: Remove unused headers from hotplug.c   Simon Horman
• [PATCH 02/43] ARM: shmobile: Remove partial CPU Hotplug from EMEV2   Simon Horman
• [PATCH 03/43] ARM: shmobile: Move EMEV2 CPU boot vector setup code   Simon Horman
• [PATCH 04/43] ARM: shmobile: Remove sh73a0_get_core_count()   Simon Horman
• [PATCH 05/43] ARM: shmobile: Remove r8a7779_get_core_count()   Simon Horman
• [PATCH 06/43] ARM: shmobile: Remove emev2_get_core_count()   Simon Horman
• [PATCH 07/43] ARM: shmobile: add MMCIF and SDHI DT clock aliases to sh73a0 and r8a7740   Simon Horman
• [PATCH 08/43] ARM: mach-shmobile: r8a7779: Allow initialisation of GIC by DT   Simon Horman
• [PATCH 09/43] ARM: mach-shmobile: r8a7779: Minimal setup using DT   Simon Horman
• [PATCH 10/43] ARM: shmobile: Kill off sh73a0 scu_base_addr() function   Simon Horman
• [PATCH 11/43] ARM: shmobile: Kill off r8a7779 scu_base_addr() function   Simon Horman
• [PATCH 12/43] ARM: shmobile: Rework EMEV2 scu_base variable   Simon Horman
• [PATCH 13/43] ARM: shmobile: Move headsmp-sh73a0.S to headsmp-scu.S   Simon Horman
• [PATCH 14/43] ARM: shmobile: Common shmobile_scu_base in headsmp-scu.S   Simon Horman
• [PATCH 15/43] ARM: shmobile: Update EMEV2 to use scu_power_mode()   Simon Horman
• [PATCH 16/43] ARM: shmobile: Make EMEV2 setup functions static   Simon Horman
• [PATCH 17/43] ARM: shmobile: sh73a0: fix Z and ZG clock hierarchy   Simon Horman
• [PATCH 18/43] ARM: shmobile: sh73a0: Remove sh73a0_init_irq_dt()   Simon Horman
• [PATCH 19/43] ARM: shmobile: sh73a0: Add smp ops to DT_MACHINE_START   Simon Horman
• [PATCH 20/43] ARM: shmobile: sh73a0: Remove warning about SMP   Simon Horman
• [PATCH 21/43] ARM: shmobile: sh73a0: Do not use early devices with DT reference   Simon Horman
• [PATCH 22/43] ARM: shmobile: r8a7779: Do not use early devices with DT reference   Simon Horman
• [PATCH 23/43] ARM: shmobile: r8a7779: Do not initialise i2c as an early device   Simon Horman
• [PATCH 24/43] ARM: shmobile: r8a7779: Remove lan from dtsi   Simon Horman
• [PATCH 25/43] ARM: shmobile: Fix base address readout in headsmp-scu.S   Simon Horman
• [PATCH 26/43] ARM: shmobile: Rework SH73A0_SCU_BASE IOMEM() usage   Simon Horman
• [PATCH 27/43] ARM: shmobile: Use R8A7779_SCU_BASE with TWD   Simon Horman
• [PATCH 28/43] ARM: shmobile: Update r8a7779 to check SCU for hotplug   Simon Horman
• [PATCH 29/43] ARM: shmobile: Update r8a7779 to use scu_power_mode()   Simon Horman
• [PATCH 30/43] ARM: shmobile: Use sh73a0-specific cpu disable code   Simon Horman
• [PATCH 31/43] ARM: shmobile: Rearrange r8a7779 cpu hotplug code   Simon Horman
• [PATCH 32/43] ARM: shmobile: Remove unused hotplug.c   Simon Horman
• [PATCH 33/43] ARM: mach-shmobile: r8a7740: Add DT names to clock list   Simon Horman
• [PATCH 34/43] ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID   Simon Horman
• [PATCH 35/43] ARM: shmobile: r8a7779: fixup dtsi typo   Simon Horman
• [PATCH 36/43] ARM: shmobile: r8a7779: fixup DT machine name   Simon Horman
• [PATCH 37/43] ARM: shmobile: r8a7779: use gic_iid macro   Simon Horman
• [PATCH 38/43] ARM: shmobile: tidyup chip series definition order for r8a7740/r8a7779   Simon Horman
• [PATCH 39/43] ARM: shmobile: r8a7779: add Thermal support on DT   Simon Horman
• [PATCH 40/43] ARM: mach-shmobile: r8a7779: SATA DT configuration   Simon Horman
• [PATCH 41/43] ARM: mach-shmobile: r8a7779: add SATA support   Simon Horman
• [PATCH 42/43] ARM: shmobile: R8A7779: use gic_iid() in SATA IRQ resource   Simon Horman
• [PATCH 43/43] r8a7779: Add Display Unit clock support   Simon Horman
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Shawn Guo
• [PATCH v3 0/4] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Roger Quadros
• [PATCH v3 1/4] usb: phy: nop: Add some parameters to platform data   Roger Quadros
• [PATCH v3 2/4] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()   Roger Quadros
• [PATCH v3 3/4] ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v3 4/4] ARM: OMAP3: Beagle: Adapt to ehci-omap changes   Roger Quadros
• [RFC PATCH 5/8] s5p-fimc: Add ISP video capture driver stubs   Hans Verkuil
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Shawn Guo
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Rob Herring
• [GIT PULL] ARM and SH based SoC clocksource update for v3.10   Simon Horman
• [PATCH 01/12] clocksource: sh_cmt: Take care of clk_put() when setup_irq() fails   Simon Horman
• [PATCH 02/12] clocksource: sh_cmt: Initialize 'max_match_value' and 'lock' in sh_cmt_setup()   Simon Horman
• [PATCH 03/12] clocksource: sh_cmt: Introduce per-register functions   Simon Horman
• [PATCH 04/12] clocksource: sh_cmt: Consolidate platform_set_drvdata() call   Simon Horman
• [PATCH 05/12] clocksource: sh_cmt: CMSTR and CMCSR register access update   Simon Horman
• [PATCH 06/12] clocksource: sh_cmt: CMCNT and CMCOR register access update   Simon Horman
• [PATCH 07/12] clocksource: sh_cmt: Add control register callbacks   Simon Horman
• [PATCH 08/12] clocksource: sh_cmt: Add CMT register layout comment   Simon Horman
• [PATCH 09/12] clocksource: sh_cmt: Set initcall level to subsys   Simon Horman
• [PATCH 10/12] clocksource: sh_tmu: Set initcall level to subsys   Simon Horman
• [PATCH 11/12] clocksource: em_sti: Set initcall level to subsys   Simon Horman
• [PATCH 12/12] clocksource: sh_mtu2: Set initcall level to subsys   Simon Horman
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Fabio Estevam
• [PATCH v2] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH 0/2] omap serial fix.   Sourav Poddar
• [PATCH/Resend 2/2] arm: mach-omap2: prevent UART console idle on suspend while using "no_console_suspend"   Sourav Poddar
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH] ARM: dts: add usb 2.0 clock references to exynos5250 device tree   Vivek Gautam
• [PATCH V3 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Jon Hunter
• [PATCH V3 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins   Jon Hunter
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Magnus Damm
• [PATCH v3 0/9] refactoring for mask_cache   Gerlando Falauto
• [PATCH v3 1/9] genirq: cosmetic: remove cur_regs   Gerlando Falauto
• [PATCH v3 2/9] genirq: add mask_cache and pmask_cache into struct irq_chip_type   Gerlando Falauto
• [PATCH v3 3/9] gpio: mvebu: convert to usage of *pmask_cache within irq_chip_type   Gerlando Falauto
• [PATCH v3 4/9] MIPS: JZ4740: convert to usage of *pmask_cache within irq_chip_type   Gerlando Falauto
• [PATCH v3 5/9] ARM: SAMSUNG: convert to usage of *pmask_cache within irq_chip_type   Gerlando Falauto
• [PATCH v3 6/9] genirq: rename mask_cache to shared_mask_cache   Gerlando Falauto
• [PATCH v3 7/9] genirq: handle separate mask registers   Gerlando Falauto
• [PATCH v3 8/9] orion-gpio: enable IRQ_GC_SEPARATE_MASK_REGISTERS   Gerlando Falauto
• [PATCH v3 9/9] gpio: mvebu: enable IRQ_GC_SEPARATE_MASK_REGISTERS   Gerlando Falauto
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Shawn Guo
• [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters   Rob Herring
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [GIT PULL] arm-soc fixes for v3.9-rc3   Arnd Bergmann
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Pavel Machek
• [PATCH v3 0/9] refactoring for mask_cache   Simon Guinot
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Shawn Guo
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V2   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V2   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2   Arnd Bergmann
• [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V2   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2   Magnus Damm
• [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support   Magnus Damm
• [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• [PATCHv1 0/2] ARM: socfpga: Soft reset, hotplug and device tree clocks   Dinh Nguyen
• [PATCH v3 0/9] refactoring for mask_cache   Simon Guinot
• [PATCH RFC] Support for JIT in Seccomp BPF filters.   Nicolas Schichan
• [PATCH V2 1/3] seccomp: add generic code for jitted seccomp filters.   Nicolas Schichan
• [PATCH V2 2/3] ARM: net: bpf_jit: make code generation less dependent on struct sk_filter.   Nicolas Schichan
• [PATCH V2 3/3] ARM: net: bpf_jit: add support for jitted seccomp filters.   Nicolas Schichan
• [GIT PULL 1/3] ARM: mvebu: cleanup for v3.10   Arnd Bergmann
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Arnd Bergmann
• [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Arnd Bergmann
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Will Deacon
• [PATCH 00/03] ARM: shmobile: r8a73a4 APE6EVM board support V2   Magnus Damm
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Magnus Damm
• [PATCH 02/03] ARM: shmobile: APE6EVM PFC support   Magnus Damm
• [PATCH 03/03] ARM: shmobile: APE6EVM LAN9220 support   Magnus Damm
• [PATCH 1/7] kbuild: create an "include chroot" for DT bindings   Shawn Guo
• [PATCH Resend v5 00/16] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support   Douglas Gilbert
• linux-next: manual merge of the bcm2835 tree with the arm-soc tree   Stephen Warren
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.   Benoit Cousson
• linux-next: manual merge of the tegra tree with the arm-soc tree   Stephen Warren
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Thomas Petazzoni
• [GIT PULL] arm-soc fixes for v3.9-rc3   Linus Torvalds
• OMAP baseline test results for v3.9-rc3   Paul Walmsley
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Santosh Shilimkar
• [PATCH 1/7] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [PATCH v2] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• linux-next: manual merge of the tegra tree with the arm-soc tree   Arnd Bergmann
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Rob Herring
• [GIT PULL] arm-soc fixes for v3.9-rc3   Arnd Bergmann
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Arnd Bergmann
• [PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Alan Stern
• [PATCH 3/6] ARM: remove fa526 CPU support   Russell King - ARM Linux
• [GIT PULL 3/3] ARM: mvebu: soc for v3.10   Thomas Petazzoni
• OMAP baseline test results for v3.9-rc3   Anca Emanuel
• [PATCH v2 for 3.10] Introduce a Marvell EBU MBus driver   Jason Cooper
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• OMAP baseline test results for v3.9-rc3   Paul Walmsley
• [RFC] Kbuild support for ARM FIT images   Pavel Machek
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Tony Lindgren
• [PATCH v3 0/4] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Tony Lindgren
• [RFC] Kbuild support for ARM FIT images   Russell King - ARM Linux
• some question about monitor mode support in arm   Christopher Covington
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnaud Patard (Rtp)
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Heiko Stübner
• [PATCH v2 0/4] ARM: mxs: sanitize enet_out clock handling   David Miller
• [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Stephen Boyd
• [PATCH 22/29] arm64: KVM: define 32bit specific registers   Christopher Covington
• [PATCH 24/29] arm64: KVM: 32bit conditional execution emulation   Christopher Covington
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Will Deacon
• [PATCH 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register   Stephen Boyd
• OMAP baseline test results for v3.9-rc3   Paul Walmsley
• [PATCH 04/10] bus: introduce an Marvell EBU MBus driver   Jason Gunthorpe
• [PATCH v2, part3 02/12] mm/ARM64: kill poison_init_mem()   Jiang Liu
• [RFC] USB: EHCI: hot-fix OMAP and Orion multiplatform config   Arnd Bergmann
• [PATCH] bounce:fix bug, avoid to flush dcache on slab page from jbd2.   Jan Kara
• [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation   Jan Kara
• [RFC] Kbuild support for ARM FIT images   Pavel Machek
• [RFC] Kbuild support for ARM FIT images   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Pawel Moll
• [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Russell King - ARM Linux
• [RFC] Kbuild support for ARM FIT images   Pavel Machek
• [U-Boot] [RFC] Kbuild support for ARM FIT images   Stephen Warren
• [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Pawel Moll
• [PATCH 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Will Deacon
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCHv2 0/3] Detect UDIV/SDIV support from ISAR0   Stephen Boyd
• [PATCHv2 1/3] ARM: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n   Stephen Boyd
• [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0 register   Stephen Boyd
• [PATCHv2 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Stephen Boyd
• [U-Boot] [RFC] Kbuild support for ARM FIT images   Tom Rini
• [PATCHv2 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Will Deacon
• [PATCH 1/2] driver: serial-omap: move max uart count into generic header file.   Kevin Hilman
• [PATCH 28/29] arm64: KVM: 32bit guest fault injection   Christopher Covington
• [PATCHv2 3/3] ARM: Work around faulty ISAR0 register in some Krait CPUs   Stephen Boyd
• [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net   Eric Hutter
• [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Russell King - ARM Linux
• [PATCH 29/29] arm64: KVM: enable initialization of a 32bit vcpu   Christopher Covington
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Greg KH
• [PATCH v3 5/6] irqchip: s3c24xx: add devicetree support   Rob Herring
• Anyone implement Cortex A9 FIQ   Jonathan Austin
• [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net   Andrew Lunn
• [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net   Jason Cooper
• [RFC] Kbuild support for ARM FIT images   Wolfgang Denk
• [U-Boot] [RFC] Kbuild support for ARM FIT images   Wolfgang Denk
• [PATCH 1/5] clk: allow reentrant calls into the clk framework   Mike Turquette
• ep93xx irq-vic regression   Linus Walleij
• [GIT PULL 3/3] ARM: mvebu: soc for v3.10   Arnd Bergmann
• [PATCH 1/5] clk: allow reentrant calls into the clk framework   Russell King - ARM Linux
• [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net   Jason Gunthorpe
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCH 0/6] pinctrl: Add support for pin control on S3C64xx   Tomasz Figa
• [PATCH 1/6] pinctrl: samsung: Protect bank registers with a spinlock   Tomasz Figa
• [PATCH 2/6] pinctrl: samsung: Include pinctrl-exynos driver data conditionally   Tomasz Figa
• [PATCH 3/6] pinctrl: samsung: Split pin bank description into two structures   Tomasz Figa
• [PATCH 4/6] pinctrl: samsung: Remove hardcoded register offsets   Tomasz Figa
• [PATCH 5/6] pinctrl: samsung: Handle banks with two configuration registers   Tomasz Figa
• [PATCH 6/6] pinctrl: Add pinctrl-s3c64xx driver   Tomasz Figa
• [PATCH 1/5] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH 2/6] pinctrl: samsung: Include pinctrl-exynos driver data conditionally   Tomasz Figa
• [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Arnd Bergmann
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Jonathan Nieder
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Rob Herring
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Arnd Bergmann
• [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation   Darrick J. Wong
• [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation   Darrick J. Wong
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Heiko Stübner
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Jason Cooper
• [PATCH] [media] ir: IR_RX51 only works on OMAP2   Mauro Carvalho Chehab
• [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver   Greg Kroah-Hartman
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Mike Turquette
• [PATCH] clk: add DT test clock consumer driver   Mike Turquette
• [GIT PULL] AB8500 Power and MFD related updates   Anton Vorontsov
• ★★★「最新SEO対策の教科書」と「超アクセスアップソフト」をもらってください 18m   ★もっと収入アップ研究部
• [GIT PULL] Renesas ARM-based SoC fixes for v3.9   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [PATCH 01/13] ARM: shmobile: use GPIO SD-card detection on armadillo800eva   Simon Horman
• [PATCH 02/13] ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva   Simon Horman
• [PATCH 03/13] ARM: shmobile: streamline mackerel SD and MMC devices   Simon Horman
• [PATCH 04/13] ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused   Simon Horman
• [PATCH 05/13] ARM: shmobile: marzen: Reference DT implementation   Simon Horman
• [PATCH 06/13] ARM: shmobile: kzm9g: Reference DT implementation   Simon Horman
• [PATCH 07/13] ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference   Simon Horman
• [PATCH 08/13] ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference   Simon Horman
• [PATCH 09/13] ARM: shmobile: simplify kzm9g Kconfig dependencies   Simon Horman
• [PATCH 10/13] ARM: shmobile: kzm9g: Remove warning about SMP   Simon Horman
• [PATCH 11/13] ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START   Simon Horman
• [PATCH 12/13] ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID   Simon Horman
• [PATCH 13/13] ARM: shmobile: kzm9g: correct smsc regulator registration   Simon Horman
• [GIT PULL v2] Renesas INTC External IRQ pin driver   Simon Horman
• [PATCH 01/14] irqchip: Renesas INTC External IRQ pin driver   Simon Horman
• [PATCH 02/14] ARM: shmobile: irq_pin() for static IRQ pin assignment   Simon Horman
• [PATCH 03/14] ARM: shmobile: INTC External IRQ pin driver on sh73a0   Simon Horman
• [PATCH 04/14] ARM: shmobile: INTC External IRQ pin driver on r8a7779   Simon Horman
• [PATCH 05/14] irqchip: intc-irqpin: Whitespace fixes   Simon Horman
• [PATCH 06/14] irqchip: intc-irqpin: Cache mapped IRQ   Simon Horman
• [PATCH 07/14] irqchip: intc-irqpin: Add force comments   Simon Horman
• [PATCH 08/14] irqchip: intc-irqpin: Make use of devm functions   Simon Horman
• [PATCH 09/14] irqchip: intc-irqpin: GPL header for platform data   Simon Horman
• [PATCH 10/14] irqchip: Renesas IRQC driver   Simon Horman
• [PATCH 11/14] ARM: shmobile: Make sh73a0 INTC irqpin platform data static   Simon Horman
• [PATCH 12/14] ARM: shmobile: Make r8a7779 INTC irqpin platform data static   Simon Horman
• [PATCH 13/14] irqchip: intc-irqpin: Initial DT support   Simon Horman
• [PATCH 14/14] irqchip: irqc: Add DT support   Simon Horman
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Rob Herring
• [PATCH] ARM: tegra: fuse: add fuctions to read speedo id and process id   Danny Huang
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2   Magnus Damm
• [PATCH 00/04] ARM: shmobile: TWD update   Simon Horman
• [PATCH] ARM: shmobile: r8a7740: Add CPU Core Standby Mode   Simon Horman
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support   Magnus Damm
• [PATCH v3 1/7] ARM: shmobile: Define DT bindings for timer devices   Simon Horman
• [PATCH v3 1/3] ARM: shmobile: sh73a0: wait for completion when kicking the clock   Simon Horman
• [PATCH v2] ARM: mm: clean-up in order to reduce to call kmap_high_get()   Joonsoo Kim
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   Joonsoo Kim
• [PATCH v3 1/3] ARM: shmobile: sh73a0: wait for completion when kicking the clock   Magnus Damm
• [PATCH 2/2] ARM: OMAP2+: clocks: Pass static parent pointers to common clock core   Rajendra Nayak
• [PATCH 00/04] ARM: shmobile: TWD update   Magnus Damm
• OMAP baseline test results for v3.9-rc2   Paul Walmsley
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Shawn Guo
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Shawn Guo
• [PATCH 1/2] driver: serial-omap: move max uart count into generic header file.   Sourav Poddar
• [GIT PULL] imx fixes for 3.9, take 3   Shawn Guo
• [GIT PULL] mxs fixes for 3.9, take 3   Shawn Guo
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Andrew Lunn
• [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver   Santosh Shilimkar
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Santosh Shilimkar
• [PATCH 0/2] omap serial fix.   Santosh Shilimkar
• [PATCH] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• [PATCH 00/04] ARM: shmobile: TWD update   Simon Horman
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Simon Horman
• [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support   Wenyou Yang
• [PATCH v7 01/14] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register.   Wenyou Yang
• [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1, 2, 3, not only on CS0   Wenyou Yang
• [PATCH v7 03/14] spi/spi-atmel: add physical base address   Wenyou Yang
• [PATCH v7 04/14] spi/spi-atmel: call unmapping on transfers buffers   Wenyou Yang
• [PATCH v7 05/14] spi/spi-atmel: status information passed through controller data   Wenyou Yang
• [PATCH v7 06/14] spi/spi-atmel: add flag to controller data for lock operations   Wenyou Yang
• [PATCH v7 07/14] spi/spi-atmel: add dmaengine support   Wenyou Yang
• [PATCH v2 1/2] ARM: vexpress: Enable regulator framework when MMCI is in use   Ulf Hansson
• [PATCH v7 08/14] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes   Wenyou Yang
• [PATCH v7 09/14] spi/spi-atmel: correct 16 bits transfers using PIO   Wenyou Yang
• [PATCH v7 10/14] spi/spi-atmel: correct 16 bits transfers with DMA   Wenyou Yang
• Anyone implement Cortex A9 FIQ   Frank Li
• [PATCH v7 11/14] ARM: at91: add clocks for spi dt entries   Wenyou Yang
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Simon Horman
• [PATCH v7 12/14] ARM: dts: add spi nodes for atmel SoC   Wenyou Yang
• [PATCH v7 13/14] ARM: dts: add spi nodes for the atmel boards   Wenyou Yang
• [PATCH v7 14/14] ARM: dts: add pinctrl property for spi node for atmel SoC   Wenyou Yang
• [PATCH] clk: add DT test clock consumer driver   Sebastian Hesselbarth
• [GIT PULL] Renesas ARM-based SoC fixes for v3.9   Arnd Bergmann
• OMAP baseline test results for v3.9-rc3   Santosh Shilimkar
• [PATCH v3] mm: Make snapshotting pages for stable writes a per-bio operation   Jan Kara
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH 3/6] ARM: remove fa526 CPU support   Imre Kaloz
• [PATCH] ARM: shmobile: ape6evm: add defconfig   Simon Horman
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Geert Uytterhoeven
• [GIT PULL] ux500 core changes for v3.10   Linus Walleij
• OMAP baseline test results for v3.9-rc3   Tero Kristo
• [GIT PULL] defconfig changes for ux500   Linus Walleij
• [PATCH] ARM: shmobile: ape6evm: add defconfig   Simon Horman
• [PATCH v2] ARM: shmobile: ape6evm: add defconfig   Simon Horman
• [PATCH] ARM: davinci: defconfig: enable CGROUPS   Sekhar Nori
• [PATCH v3 2/2] crypto: sahara: Add driver for SAHARA2 accelerator.   javier Martin
• [PATCH v3 0/9] refactoring for mask_cache   Ezequiel Garcia
• [PATCH v3 0/9] refactoring for mask_cache   Gerlando Falauto
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Magnus Damm
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Magnus Damm
• [PATCH v3 1/7] ARM: shmobile: Define DT bindings for timer devices   Bastian Hecht
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Will Deacon
• [PATCH] ARM: shmobile: r8a7740: Add CPU Core Standby Mode   Bastian Hecht
• [PATCH] ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0   Marek Vasut
• [PATCHv4 0/7] ARM: sunxi: Extend UART support for Allwinner SoCs   Maxime Ripard
• [PATCH 1/7] serial: 8250_dw: add support for clk api   Maxime Ripard
• [PATCH 2/7] ARM: sunxi: dt: Use clocks property instead of clock-frequency for the UARTs   Maxime Ripard
• [PATCH 3/7] ARM: sunxi: Rename uart nodes to serial   Maxime Ripard
• [PATCH 4/7] ARM: sunxi: dt: Move uart0 to sun4i-a10.dtsi   Maxime Ripard
• [PATCH 5/7] ARM: sunxi: dt: Add uart3 dt node   Maxime Ripard
• [PATCH 6/7] ARM: sunxi: dt: Add A10 UARTs to the dtsi.   Maxime Ripard
• [PATCH 7/7] ARM: sunxi: hackberry: Add UART muxing   Maxime Ripard
• [PATCH 3/6] ARM: remove fa526 CPU support   Arnd Bergmann
• [PATCH] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Rajendra Nayak
• [PATCH 1/7] serial: 8250_dw: add support for clk api   Maxime Ripard
• [PATCH] serial: 8250_dw: add support for clk api   Maxime Ripard
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH v3 0/9] refactoring for mask_cache   Jason Cooper
• [PATCH v3 0/9] refactoring for mask_cache   Gerlando Falauto
• [PATCH v3 0/9] refactoring for mask_cache   Ezequiel Garcia
• [PATCH 4/4] ARM: at91: introduce SAMA5 support   ludovic.desroches at atmel.com
• [PATCH v3 0/9] refactoring for mask_cache   Ezequiel Garcia
• [PATCH v3 2/9] genirq: add mask_cache and pmask_cache into struct irq_chip_type   Thomas Gleixner
• [PATCH 3/4][V2] ARM: nomadik: add dynamic irq flag to the timer   Daniel Lezcano
• [PATCH v3 0/9] refactoring for mask_cache   Jason Cooper
• [PATCH 2/2] cpuidle / calxeda: remove redundant Kconfig option   Daniel Lezcano
• [PATCH] ARM: ux500: select WATCHDOG and MUSB for ux500   Fabio Baltieri
• [PATCH v3 0/9] refactoring for mask_cache   Jason Cooper
• [PATCH V2] clk: Add composite clock type   Prashant Gaikwad
• [PATCH 2/2] cpuidle / calxeda: remove redundant Kconfig option   Rob Herring
• [RFC PATCH] ARM: mm: disable kmap_high_get() for SMP   Nicolas Pitre
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Masami Hiramatsu
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10   Santosh Shilimkar
• [PATCH v2 01/11] ARM: dts: omap5-evm: Update available memory to 2032 MB   Santosh Shilimkar
• [PATCH v2 02/11] ARM: dts: OMAP5: Align the local timer dt node as per the current binding code   Santosh Shilimkar
• [PATCH v2 03/11] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer   Santosh Shilimkar
• [PATCH v2 04/11] ARM: dts: OMAP5: Move the gic node out of ocp space   Santosh Shilimkar
• [PATCH v2 05/11] ARM: dts: OMAP5: Update the timer and gic nodes for HYP kernel support   Santosh Shilimkar
• [PATCH v2 06/11] ARM: dts: OMAP5: Update keypad reg property   Santosh Shilimkar
• [PATCH v2 07/11] Documentation: dt: OMAP: l3-noc: Add *reg* in required properties   Santosh Shilimkar
• [PATCH v2 08/11] ARM: dts: OMAP4/5: Update l3-noc dt nodes   Santosh Shilimkar
• [PATCH v2 09/11] ARM: dts: OMAP5: Add watchdog timer node   Santosh Shilimkar
• [PATCH v2 10/11] ARM: OMAP2+: hwmod: extract module address space from DT blob   Santosh Shilimkar
• [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc   Santosh Shilimkar
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Jason Cooper
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Ezequiel Garcia
• USB: simplify clock lookup for mv ehci/otg/udc   Arnd Bergmann
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Masami Hiramatsu
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Masami Hiramatsu
• [RFC][PATCH 0/2] Device tree support for OMAP4 SCRM clocks   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH 2/2] ARM: dts: omap4-panda: Provide PHY clock information   Roger Quadros
• [RFC][PATCH 0/2] Device tree support for OMAP4 SCRM clocks   Roger Quadros
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Jason Cooper
• [PATCH 2/2] cpuidle / calxeda: remove redundant Kconfig option   Daniel Lezcano
• USB: simplify clock lookup for mv ehci/otg/udc   Felipe Balbi
• [PATCH 3/6] ARM: remove fa526 CPU support   Imre Kaloz
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Bastian Hecht
• [PATCH 2/2] cpuidle / calxeda: remove redundant Kconfig option   Rob Herring
• [PATCH] arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS   Paul Bolle
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   dinguyen at altera.com
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   dinguyen at altera.com
• [PATCH] arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED   Catalin Marinas
• [PATCH V3 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver   Jon Hunter
• [PATCH] arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS   Catalin Marinas
• [GIT PULL] ARM: tegra: DT-related fixes needed by the MMC tree   Stephen Warren
• [PATCH V4 00/18] ARM: OMAP2+: GPMC clean-up and DT update   Jon Hunter
• [PATCH V4 01/18] ARM: OMAP2+: Simplify code configuring ONENAND devices   Jon Hunter
• [PATCH V4 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins   Jon Hunter
• [PATCH V4 03/18] ARM: OMAP2+: Add structure for storing GPMC settings   Jon Hunter
• [PATCH V4 04/18] ARM: OMAP2+: Add function for configuring GPMC settings   Jon Hunter
• [PATCH V4 05/18] ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V4 06/18] ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V4 07/18] ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V4 08/18] ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()   Jon Hunter
• [PATCH V4 09/18] ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()   Jon Hunter
• [PATCH V4 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree   Jon Hunter
• [PATCH V4 11/18] ARM: OMAP2+: Add additional GPMC timing parameters   Jon Hunter
• [PATCH V4 12/18] ARM: OMAP2+: Add device-tree support for NOR flash   Jon Hunter
• [PATCH V4 13/18] ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT   Jon Hunter
• [PATCH V4 14/18] ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT   Jon Hunter
• [PATCH V4 15/18] ARM: OMAP2+: Detect incorrectly aligned GPMC base address   Jon Hunter
• [PATCH V4 16/18] ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable   Jon Hunter
• [PATCH V4 17/18] ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails   Jon Hunter
• [PATCH V4 18/18] ARM: OMAP2+: return -ENODEV if GPMC child device creation fails   Jon Hunter
• [PATCH V2 2/3] ARM: tegra: get PMC clock source from DT   Stephen Warren
• [PATCH V2 1/3] ARM: dts: tegra: add clock source for PMC   Stephen Warren
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Gregory CLEMENT
• [GIT PULL] ARM: OMAP2+: clkdev flags removal for 3.10 cleanup   Paul Walmsley
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Mike Turquette
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH V4 0/9] ARM: tegra: add platform suspend support   Stephen Warren
• [PATCH 0/2] These two patches to s3c_pm_arch_prepare_irqs() were part of the work   Doug Anderson
• [PATCH 1/2] arm: exynos: Remove hardcode wakeup unmask for EINT_0   Doug Anderson
• [PATCH 2/2] arm: exynos: Clear ENABLE_WAKEUP_SW bit when entering suspend   Doug Anderson
• [PATCH V4 1/9] gpio: tegra: add gpio wakeup source handling   Stephen Warren
• [PATCH V4 2/9] ARM: tegra: irq: add wake up handling   Stephen Warren
• [PATCH] ARM: i.MX53 Add the cko1, cko2 clock outputs.   Martin Fuzzey
• [PATCH V4 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Stephen Warren
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Mike Turquette
• [PATCH] Sound: sgtl5000 Allow codec clock frequency to be set.   Martin Fuzzey
• ep93xx irq-vic regression   H Hartley Sweeten
• [PATCH V4 4/9] ARM: tegra: pm: add platform suspend support   Stephen Warren
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Martin Fuzzey
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [GIT PULL] ARM: tegra: DT-related fixes needed by the MMC tree   Chris Ball
• [PATCH V4 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC   Stephen Warren
• [PATCH 0/5] ARM: OMAP: DMTIMER updates for v3.10   Jon Hunter
• [PATCH 1/5] ARM: OMAP: Simplify dmtimer context-loss handling   Jon Hunter
• [PATCH 2/5] ARM: OMAP: Force dmtimer restore if context loss is not detectable   Jon Hunter
• [PATCH 3/5] ARM: OMAP: Add function to request timer by node   Jon Hunter
• [PATCH 4/5] ARM: dts: OMAP2+: Update DMTIMER compatibility property   Jon Hunter
• [PATCH 5/5] ARM: OMAP2+: Populate DMTIMER errata when using device-tree   Jon Hunter
• [PATCH v3 0/4] Preparatory GIC patches for arm64 support   Catalin Marinas
• [PATCH v3 1/4] arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h   Catalin Marinas
• [PATCH v3 2/4] arm: Move chained_irq_(enter|exit) to a generic file   Catalin Marinas
• [PATCH v3 3/4] irqchip: gic: Call handle_bad_irq() directly   Catalin Marinas
• [PATCH v3 4/4] irqchip: gic: Perform the gic_secondary_init() call via CPU notifier   Catalin Marinas
• [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Nishanth Menon
• [PATCH V2 1/8] ARM: dts: OMAP34xx/35xx: Add CPU OPP table   Nishanth Menon
• [PATCH V2 2/8] ARM: dts: OMAP36xx: Add CPU OPP table   Nishanth Menon
• [PATCH V2 3/8] ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU   Nishanth Menon
• [PATCH V2 4/8] ARM: dts: OMAP443x: Add CPU OPP table   Nishanth Menon
• [PATCH V2 5/8] ARM: dts: omap4-panda: move generic sections to panda-common   Nishanth Menon
• [PATCH V2 6/8] ARM: dts: OMAP4460: Add CPU OPP table   Nishanth Menon
• [PATCH V2 7/8] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot   Nishanth Menon
• [PATCH V2 8/8] cpufreq: OMAP: donot allow to be used with device tree   Nishanth Menon
• [PATCH v2] ARM: tegra114: add speedo-based process identification   Stephen Warren
• [Linaro-mm-sig] [PATCH 2/2] drivers: dma-contiguous: add initialization from device tree   Laura Abbott
• OK to use commit 71856843 as base for further omap clean up?   Tony Lindgren
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Tony Lindgren
• [PATCH] ARM: tegra: fuse: add fuctions to read speedo id and process id   Stephen Warren
• [PATCH 0/2] More 'generic' vexpress poweroff/restart driver   Catalin Marinas
• [PATCH 1/2] arm: vexpress: Move the poweroff/restart code to drivers/power/reset   Catalin Marinas
• [PATCH 2/2] arm: vexpress: Decouple vexpress-poweroff implementation from machine_desc   Catalin Marinas
• [PATCH 0/4] led: drivers bug fixes   Simon Guinot
• [PATCH 1/4] leds: leds-ns2: fix oops at module removal   Simon Guinot
• [PATCH 2/4] leds: leds-ns2: fix devm_gpio_request_one() flags parameter   Simon Guinot
• [PATCH 3/4] leds: leds-lt3593: fix devm_gpio_request_one() flags parameter   Simon Guinot
• [PATCH 4/4] leds: renesas: fix devm_gpio_request_one() flags parameter   Simon Guinot
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Will Deacon
• [GIT PULL]: ARM: OMAP: miscellaneous PM/clock fixes for 3.9-rc   Tony Lindgren
• [PATCH v3 6/6] irqchip: s3c24xx: add s3c2450 interrupt definitions   Heiko Stübner
• [PATCH 1/5] net: Add davicom wemac ethernet driver found on Allwinner A10 SoC's   Maxime Ripard
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Dinh Nguyen
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Mike Turquette
• [PATCH V4 0/9] Add mandatory regulator for all users of pwm-backlight.   Andrew Chew
• [PATCH V4 1/9] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 2/9] ARM: S3C24XX: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 3/9] ARM: pxa: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 4/9] ARM: EXYNOS: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 5/9] unicore32: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 7/9] ARM: vt8500: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 8/9] ARM: tegra: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V4 9/9] pwm_bl: Add mandatory backlight enable regulator   Andrew Chew
• ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock   Nicolas Pitre
• [PATCH] pinctrl: mvebu: fix checking for SoC specific controls   Simon Guinot
• [PATCH] pinctrl: mvebu: fix checking for SoC specific controls   Sebastian Hesselbarth
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Florian Fainelli
• [RESEND PATCH 2/4] clk: Unprepare the unused prepared slow clocks at late init   Mike Turquette
• [PATCHv2] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• [PATCH v3] clk: Add axi-clkgen driver   Mike Turquette
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Heiko Stübner
• [PATCHv2] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Andrew Lunn
• [RESEND PATCH 1/3] clk: Remove _clk_reparent from API and restructure code   Mike Turquette
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Marek Vasut
• [PATCH] ARM: remove unused "config XSCALE_PMU"   Paul Bolle
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH] clk: add table lookup to mux   Mike Turquette
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Marek Vasut
• [PATCH] clk: add table lookup to mux   Mike Turquette
• [PATCH] clk: add table lookup to mux   Stephen Warren
• [PATCH] clk: add table lookup to mux   Stephen Warren
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Mike Turquette
• [PATCHv2] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• gen_pool_add broken with LPAE based systems   Andrew Morton
• [PATCH 2/2] cpuidle / calxeda: remove redundant Kconfig option   Daniel Lezcano
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Stephen Warren
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Mike Turquette
• [PATCHv3] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• gen_pool_add broken with LPAE based systems   Laura Abbott
• gen_pool_add broken with LPAE based systems   Andrew Morton
• [PATCH] irqchip: gic: fix irq_trigger return   Stephen Boyd
• [PATCH] clk: add table lookup to mux   Mike Turquette
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Kukjin Kim
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Mike Turquette
• [PATCH v3] clk: add si5351 i2c common clock driver   Mike Turquette
• [PATCH 2/4] leds: leds-ns2: fix devm_gpio_request_one() flags parameter   Jingoo Han
• [PATCH 3/4] leds: leds-lt3593: fix devm_gpio_request_one() flags parameter   Jingoo Han
• [PATCH 4/4] leds: renesas: fix devm_gpio_request_one() flags parameter   Jingoo Han
• [PATCH 1/2] ARM: mach-pca100: Add CONFIG_USB_ULPI dependency   Fabio Estevam
• [PATCH 2/2] ARM: imx_v4_v5_defconfig: Select CONFIG_USB_PHY   Fabio Estevam
• [PATCH] ARM: tegra: fuse: add fuctions to read speedo id and process id   Danny Huang
• [PATCH v2] ARM: tegra114: add speedo-based process identification   Danny Huang
• [PATCH v2] ARM: tegra114: add speedo-based process identification   Stephen Warren
• [PATCH] ARM: tegra: fuse: add fuctions to read speedo id and process id   Stephen Warren
• [PATCH V4 0/9] Add mandatory regulator for all users of pwm-backlight.   Shawn Guo
• [PATCH] ARM: tegra: fuse: add fuctions to read speedo id and process id   Danny Huang
• [PATCH V4 0/9] Add mandatory regulator for all users of pwm-backlight.   Alex Courbot
• [PATCH] ARM: cache-l2x0: fix masking of RTL revision numbering   Rob Herring
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Mike Turquette
• [PATCH V4 0/9] Add mandatory regulator for all users of pwm-backlight.   Shawn Guo
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Shawn Guo
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Mike Turquette
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Kukjin Kim
• [PATCH V2 8/8] cpufreq: OMAP: donot allow to be used with device tree   Santosh Shilimkar
• [PATCH 1/2] ARM: mach-pca100: Add CONFIG_USB_ULPI dependency   Felipe Balbi
• [PATCH 2/2] ARM: imx_v4_v5_defconfig: Select CONFIG_USB_PHY   Felipe Balbi
• [LAKML][Users getting knocked of from list]   Santosh Shilimkar
• [PATCH v2] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices   Philip Avinash
• [PATCH v2 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Philip Avinash
• [PATCH v2 1/3] ARM: davinci: clk framework support for enable/disable functionality   Philip Avinash
• [PATCH v2 2/3] arm: davinci: clock node support for ECAP & EHRPWM   Philip Avinash
• [PATCH v2 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip Avinash
• [LAKML][Users getting knocked of from list]   Sekhar Nori
• [PATCH V4 0/9] Add mandatory regulator for all users of pwm-backlight.   Tony Prisk
• [PATCH 1/3] ARM: imx: enable anatop suspend/resume   Shawn Guo
• [PATCH 2/3] ARM: imx: enable periphery well bias for suspend   Shawn Guo
• [PATCH 1/3] ARM: imx: enable anatop suspend/resume   Shawn Guo
• [PATCH v3] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Mark Brown
• [LAKML][Users getting knocked of from list]   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: Generic updates and es2 fixes for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH 3/3] ARM: imx: enable RBC to support anatop LPM mode   Shawn Guo
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH v2] mfd: remove twelve unused Kconfig symbols   Paul Bolle
• [PATCH v3 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v3 2/6] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v3 3/6] usb: otg: twl4030: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v3 4/6] ARM: OMAP: USB: Add phy binding information   Kishon Vijay Abraham I
• [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH v3 6/6] usb: musb: omap2430: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH 3/3] ARM: imx: enable RBC to support anatop LPM mode   Shawn Guo
• [PATCH] mmc: atmel-mci: pio hang on block errors   ludovic.desroches at atmel.com
• [RESEND PATCH 2/4] clk: Unprepare the unused prepared slow clocks at late init   Ulf Hansson
• [PATCH] clk: add table lookup to mux   Peter De Schrijver
• [LAKML][Users getting knocked of from list]   Russell King - ARM Linux
• [RESEND PATCH 1/3] clk: Remove _clk_reparent from API and restructure code   Ulf Hansson
• [PATCH] clk: add table lookup to mux   Peter De Schrijver
• [PATCH V2 2/3] ARM: tegra: get PMC clock source from DT   Joseph Lo
• [PATCH V2 1/3] ARM: dts: tegra: add clock source for PMC   Joseph Lo
• [RESEND PATCH 1/3] clk: Remove _clk_reparent from API and restructure code   Rajendra Nayak
• [PATCH V4 0/9] ARM: tegra: add platform suspend support   Joseph Lo
• [LAKML][Users getting knocked of from list]   Santosh Shilimkar
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH V4 4/9] ARM: tegra: pm: add platform suspend support   Joseph Lo
• TI users about to be banned from all lists.infradead.org mailing lists (was Re: [LAKML][Users getting knocked of from list])   David Woodhouse
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• TI users about to be banned from all lists.infradead.org mailing lists (was Re: [LAKML][Users getting knocked of from list])   Santosh Shilimkar
• [PATCH v4 0/5] Enable SPI flash support on da850-evm DT kernel   Manjunathappa, Prakash
• [PATCH v4 1/5] spi/davinci: no wildcards in DT compatible property   Manjunathappa, Prakash
• [PATCH v4 2/5] spi/davinci: add DT binding documentation   Manjunathappa, Prakash
• [PATCH v4 3/5] ARM: davinci: da850: add SPI1 DT node   Manjunathappa, Prakash
• [PATCH v4 4/5] ARM: davinci: da850: override SPI DT node device name   Manjunathappa, Prakash
• [PATCH v4 5/5] ARM: davinci: da850-evm: add SPI flash support   Manjunathappa, Prakash
• [PATCH 1/4] Device tree entry for Freescale TDM controller   Singh Sandeep-B37400
• [PATCH] S3C24XX: remove unneeded "config SMDK2440_CPU2442"   Paul Bolle
• [PATCH 0/2] arm: prima2: add support for CSR SiRFatlas6 SoC   Arnd Bergmann
• [PATCH v4 0/5] Enable SPI flash support on da850-evm DT kernel   Sekhar Nori
• [PATCH v2 1/3] ARM: davinci: clk framework support for enable/disable functionality   Sekhar Nori
• [PATCH] DTS at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcd   Richard Genoud
• [PATCH] DTS at91sam9x5cm: add 1-wire chip on CM board   Richard Genoud
• [PATCH v2 2/3] arm: davinci: clock node support for ECAP & EHRPWM   Sekhar Nori
• [PATCH v2 1/3] ARM: davinci: clk framework support for enable/disable functionality   Philip, Avinash
• [PATCH v2 2/3] arm: davinci: clock node support for ECAP & EHRPWM   Philip, Avinash
• [PATCH v2 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH 0/8] SIRF multiplatform support   Arnd Bergmann
• [PATCH 1/8] pinctrl: sirf: convert to linear irq domain   Arnd Bergmann
• [PATCH 2/8] ARM: sirf: fix prima2 interrupt lookup   Arnd Bergmann
• [PATCH 3/8] ARM: sirf: move irq driver to drivers/irqchip   Arnd Bergmann
• [PATCH 4/8] ARM: sirf: enable sparse IRQ   Arnd Bergmann
• [PATCH 5/8] ARM: sirf: move debug-macro.S to include/debug/sirf.S   Arnd Bergmann
• [PATCH 6/8] ARM: sirf: use clocksource_of infrastructure   Arnd Bergmann
• [PATCH 7/8] ARM: sirf: enable multiplatform support   Arnd Bergmann
• [PATCH 8/8] ARM: sirf: enable support in multi_v7_defconfig   Arnd Bergmann
• [PATCH v6 0/5] Add DT support for davinci_mmc driver   Manjunathappa, Prakash
• [PATCH v6 1/5] mmc: davinci: allow driver to work without DMA resource   Manjunathappa, Prakash
• [PATCH v6 2/5] ARM: davinci: mmc: derive version information from device name   Manjunathappa, Prakash
• [PATCH v6 3/5] mmc: davinci_mmc: add DT support   Manjunathappa, Prakash
• [PATCH v6 4/5] ARM: davinci: da850: add mmc DT entries   Manjunathappa, Prakash
• [PATCH v6 5/5] ARM: davinci: da850: override mmc DT node device name   Manjunathappa, Prakash
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Arnd Bergmann
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   Shawn Guo
• [PATCH V3] clk: Add composite clock type   Prashant Gaikwad
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Dinh Nguyen
• [PATCH 0/8] SIRF multiplatform support   Arnd Bergmann
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Arnd Bergmann
• [PATCH v2 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Peter Korsgaard
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Simon Horman
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Simon Horman
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Simon Horman
• [PATCH 2/6] usb: otg: mv_otg: remove unused clock   Felipe Balbi
• [PATCH v6 3/5] mmc: davinci_mmc: add DT support   Arnd Bergmann
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   Frank Li
• [PATCH 1/2] ARM: mach-pca100: Add CONFIG_USB_ULPI dependency   Fabio Estevam
• [GIT PULL] Renesas ARM-based SoC fixes for v3.9   Simon Horman
• [PATCH 0/4] ARM: tegra: dalmore: add regulators   Laxman Dewangan
• [PATCH 1/4] ARM: tegra: enable Tegra114 based platform PMICs   Laxman Dewangan
• [PATCH 2/4] ARM: tegra: dalmore: add cpu regulator's node   Laxman Dewangan
• [PATCH 3/4] ARM: tegra: dalmore: add dt node for TPS65090's regulators   Laxman Dewangan
• [PATCH 4/4] ARM: tegra: dalmore: add fixed regulator's node   Laxman Dewangan
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Pavel Machek
• [PATCH v3] clk: add si5351 i2c common clock driver   michal.bachraty at gmail.com
• [PATCHv2 2/2] ARM: socfpga: Add clock entries into device tree   Pavel Machek
• [PATCH V4 6/9] ARM: mxs: Provide regulator to pwm-backlight   Marek Vasut
• [PATCH 0/2] arm: prima2: add support for CSR SiRFatlas6 SoC   Barry Song
• [PATCH] mmc: mvsdio: fix non-DT probing of GPIOs   Thomas Petazzoni
• [PATCH 1/8] pinctrl: sirf: convert to linear irq domain   Barry Song
• [PATCH 00/04] ARM: shmobile: r8a7790 SoC and Lager board support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7790 SoC support   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a7790 IRQC support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: Lager support   Magnus Damm
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Mike Turquette
• [PATCH 01/03] ARM: shmobile: APE6EVM base support V2   Magnus Damm
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Mike Turquette
• [RESEND PATCH 1/3] clk: Remove _clk_reparent from API and restructure code   Mike Turquette
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Gregory CLEMENT
• [PATCH v2] mmc: mvsdio: fix non-DT probing of GPIOs   Thomas Petazzoni
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Gregory CLEMENT
• [PATCH] mmc: mvsdio: use dev_*() API instead of pr_*() API   Thomas Petazzoni
• [PATCH V2 1/3] ARM: imx: enable anatop suspend/resume   Shawn Guo
• [PATCH V2 2/3] ARM: imx: enable periphery well bias for suspend   Shawn Guo
• [PATCH V2 3/3] ARM: imx: enable RBC to support anatop LPM mode   Shawn Guo
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Laurent Pinchart
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   Pavel Machek
• [PATCH] ARM: tegra: Add sbs-battery node to Dalmore   Rhyland Klein
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Thomas Petazzoni
• [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10   Roger Quadros
• [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data   Roger Quadros
• [PATCH v4 02/21] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()   Roger Quadros
• [PATCH v4 03/21] ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 04/21] ARM: OMAP3: Beagle: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 05/21] ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 06/21] ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 07/21] ARM: OMAP: AM3517crane: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 08/21] ARM: OMAP: AM3517evm: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 09/21] ARM: OMAP3: cm-t35: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 10/21] ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 11/21] ARM: OMAP: devkit8000: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 12/21] ARM: OMAP3: igep0020: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 13/21] ARM: OMAP3: omap3evm: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 14/21] ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 15/21] ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 16/21] ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 17/21] ARM: OMAP3: overo: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 18/21] ARM: OMAP: zoom: Adapt to ehci-omap changes   Roger Quadros
• [PATCH v4 19/21] ARM: dts: OMAP4: Add HS USB Host IP nodes   Roger Quadros
• [PATCH v4 20/21] ARM: dts: OMAP3: Add HS USB Host IP nodes   Roger Quadros
• [PATCH v4 21/21] ARM: dts: omap3-beagle: Add USB Host support   Roger Quadros
• [PATCH V2 2/3] ARM: tegra: get PMC clock source from DT   Stephen Warren
• [PATCH] clk: add table lookup to mux   Mike Turquette
• [PATCH V2 1/3] ARM: dts: tegra: add clock source for PMC   Stephen Warren
• [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data   Felipe Balbi
• [PATCH v3 1/1 net-next] NET: FEC: dynamtic check DMA desc buff type   Uwe Kleine-König
• [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data   Tony Lindgren
• [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data   Felipe Balbi
• [PATCH] ARM: OMAP: fix typo "CONFIG_SMC91x_MODULE"   Tony Lindgren
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Sören Brinkmann
• [PATCH V3 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver   Tony Lindgren
• [RFC 0/2] ARM: OMAP: dma.h cleanup   Tony Lindgren
• [PATCH 1/1] documentation: clk: fix couple of misspelling   Mike Turquette
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Ryan Press
• [PATCH v3] clk: add si5351 i2c common clock driver   Daniel Mack
• [PATCH v3 4/6] ARM: OMAP: USB: Add phy binding information   Tony Lindgren
• [PATCH 3/4] ARM: tegra: dalmore: add dt node for TPS65090's regulators   Rhyland Klein
• [PATCHv3 08/10] clocksource: time-armada-370-xp: Fix sparse warning   Gregory CLEMENT
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Gregory CLEMENT
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Gregory CLEMENT
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Gregory CLEMENT
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Thomas Petazzoni
• [PATCH v3 1/1 net-next] NET: FEC: dynamtic check DMA desc buff type   Ben Hutchings
• [PATCH 1/3] ARM: imx: enable anatop suspend/resume   Anson Huang
• [PATCH 2/3] ARM: imx: enable periphery well bias for suspend   Anson Huang
• [PATCH 3/3] ARM: imx: enable RBC to support anatop LPM mode   Anson Huang
• [PATCH v3 0/9] refactoring for mask_cache   Gerlando Falauto
• [PATCH v2] mmc: mvsdio: fix non-DT probing of GPIOs   Russell King - ARM Linux
• [PATCHv2 1/2] ARM: socfpga: Enable soft reset   Russell King - ARM Linux
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Gregory CLEMENT
• [PATCH V4 9/9] pwm_bl: Add mandatory backlight enable regulator   Stephen Warren
• [PATCHv3 09/10] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
• [PATCH 3/4] ARM: tegra: dalmore: add dt node for TPS65090's regulators   Laxman Dewangan
• [PATCH v3 1/1 net-next] NET: FEC: dynamtic check DMA desc buff type   Fabio Estevam
• [Bulk] [PATCH V4 7/9] ARM: vt8500: Provide regulator to pwm-backlight   Tony Prisk
• [PATCH] mach_omap2: use PTR_RET instead of IS_ERR + PTR_ERR   Jon Hunter
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Sascha Hauer
• [PATCH v3 1/1 net-next] NET: FEC: dynamtic check DMA desc buff type   Ben Hutchings
• [PATCH v2] mmc: mvsdio: fix non-DT probing of GPIOs   Thomas Petazzoni
• [PATCHv3] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Andrew Lunn
• [PATCH v4 06/18] arm: pci: add a align_resource hook   Thomas Petazzoni
• [PATCH 16/29] arm64: KVM: HYP mode world switch implementation   Christopher Covington
• [kvmarm] [PATCH 14/29] arm64: KVM: guest one-reg interface   Christopher Covington
• [RESEND PATCH 1/3] clk: Remove _clk_reparent from API and restructure code   Ulf Hansson
• [PATCH 1/3] ARM: imx: enable anatop suspend/resume   Anson Huang
• [PATCH 3/4] ARM: tegra: dalmore: add dt node for TPS65090's regulators   Stephen Warren
• [PATCH 1/4] ARM: tegra: enable Tegra114 based platform PMICs   Stephen Warren
• [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data   Stephen Warren
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Ulf Hansson
• [PATCH 2/3] ARM: imx: enable periphery well bias for suspend   Anson Huang
• [PATCH v3 0/9] refactoring for mask_cache   Thomas Gleixner
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Andrew Morton
• [PATCH 3/3] ARM: imx: enable RBC to support anatop LPM mode   Anson Huang
• [PATCH V4 9/9] pwm_bl: Add mandatory backlight enable regulator   Thierry Reding
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Rob Herring
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   Sylwester Nawrocki
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH 01/16] thermal: Rename driver 'kirkwood' -> 'mvebu'   Ezequiel Garcia
• [PATCH 02/16] thermal: mvebu: Rename symbols 'kirkwood' -> 'mvebu'   Ezequiel Garcia
• [PATCH 03/16] thermal: mvebu: Move MODULE_DEVICE_TABLE upwards   Ezequiel Garcia
• [PATCH 04/16] thermal: mvebu: Remove unneeded variable initialization   Ezequiel Garcia
• [PATCH 05/16] thermal: mvebu: Fix valid check for thermal register   Ezequiel Garcia
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Ezequiel Garcia
• [PATCH 07/16] thermal: mvebu: Fix license declaration   Ezequiel Garcia
• [PATCH 08/16] thermal: mvebu: Fix temperature output formula for kirkwood   Ezequiel Garcia
• [PATCH 09/16] thermal: mvebu: Rename kirkwood definitions to mvebu   Ezequiel Garcia
• [PATCH 10/16] thermal: mvebu: Add infrastructure to support more multiple SoC variants   Ezequiel Garcia
• [PATCH 11/16] thermal: mvebu: Add support for Armada XP thermal sensor   Ezequiel Garcia
• [PATCH 12/16] thermal: mvebu: Add support for Armada 370 thermal sensor   Ezequiel Garcia
• [PATCH 13/16] thermal: mvebu: Add support for Marvell Dove SoC family   Ezequiel Garcia
• [PATCH 14/16] ARM: mvebu: Add thermal support to Armada XP device tree   Ezequiel Garcia
• [PATCH 15/16] ARM: mvebu: Add thermal support to Armada 370 device tree   Ezequiel Garcia
• [PATCH 16/16] ARM: configs: Update mvebu, dove and kirkwood defconfigs for thermal   Ezequiel Garcia
• [PATCH 00/11] sp804 and integrator timer CLKSRC_OF support   Rob Herring
• [PATCH 01/11] OF: add empty of_device_is_available for !OF   Rob Herring
• [PATCH 02/11] ARM: remove extra timer-sp control register clearing   Rob Herring
• [PATCH 03/11] ARM: timer-sp: convert to use CLKSRC_OF init   Rob Herring
• [PATCH 04/11] ARM: highbank: use OF init for sp804 timer   Rob Herring
• [PATCH 05/11] ARM: vexpress: remove sp804 OF init   Rob Herring
• [PATCH 06/11] ARM: dts: vexpress: disable CA9 core tile sp804 timer   Rob Herring
• [PATCH 07/11] ARM: versatile: add versatile dtbs to dtbs target   Rob Herring
• [PATCH 08/11] ARM: versatile: use OF init for sp804 timer   Rob Herring
• [PATCH 09/11] ARM: integrator-cp: convert use CLKSRC_OF for timer init   Rob Herring
• [PATCH 10/11] ARM: move sp804 and integrator timers to drivers/clocksource   Rob Herring
• [PATCH 11/11] devtree: add binding documentation for sp804   Rob Herring
• [PATCH] mxs/spi: Add SPI slave mode operation DT prop   Trent Piepho
• [PATCH 0/3] ARM sched_clock selection enhancements   Rob Herring
• Integrator PCI base dilemma   Linus Walleij
• [PATCH 0/3] ARM: context tracking support prerequisites   Kevin Hilman
• [PATCH 1/3] cputime_nsecs: use math64.h for nsec resolution conversion helpers   Kevin Hilman
• [PATCH 2/3] init/Kconfig: virt CPU accounting: drop 64-bit requirment   Kevin Hilman
• [PATCH 3/3] ARM: Kconfig: allow virt CPU accounting   Kevin Hilman
• [PATCH] mxs/spi: Add SPI slave mode operation DT prop   Marek Vasut
• [PATCH V2 1/3] ARM: imx: enable anatop suspend/resume   Anson Huang
• [PATCH V2 2/3] ARM: imx: enable periphery well bias for suspend   Anson Huang
• [PATCH V2 3/3] ARM: imx: enable RBC to support anatop LPM mode   Anson Huang
• Integrator PCI base dilemma   Rob Herring
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Ryan Press
• [PATCH 0/4] ARM: add support for context tracking subsystem   Kevin Hilman
• [PATCH 1/4] ARM: context tracking: add exception support   Kevin Hilman
• [PATCH 2/4] ARM: context tracking: instrument system calls   Kevin Hilman
• [PATCH 3/4] ARM: context tracking: handle post exception/syscall/IRQ work   Kevin Hilman
• [PATCH 4/4] ARM: Kconfig: allow context tracking   Kevin Hilman
• [PATCH 0/4] led: drivers bug fixes   Bryan Wu
• [PATCH] clk: add LP8788 clock driver   Kim, Milo
• [PATCH] Changes to resolve the multiple client issue: by Michael Street   Rohit Vaswani
• [Please Ignore] Re: [PATCH] Changes to resolve the multiple client issue: by Michael Street   Rohit Vaswani
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Bill Huang
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Douglas Gilbert
• [PATCH] Sound: sgtl5000 Allow codec clock frequency to be set.   Timur Tabi
• Request the linux-next inclusion for IMX/MXS tree   Shawn Guo
• [BUG][mvebu] mvneta: cannot request irq 25 on openblocks-ax3   Masami Hiramatsu
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Masami Hiramatsu
• [PATCH V3 3/3] ARM: imx: enable RBC to support anatop LPM mode   Shawn Guo
• [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Shawn Guo
• [PATCH v3 1/6] drivers: phy: add generic PHY framework   kishon
• [PATCH v3 4/6] ARM: OMAP: USB: Add phy binding information   kishon
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Andrew Lunn
• [PATCH 13/16] thermal: mvebu: Add support for Marvell Dove SoC family   Andrew Lunn
• [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data   kishon
• [PATCH 13/16] thermal: mvebu: Add support for Marvell Dove SoC family   Andrew Lunn
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Andrew Lunn
• [PATCH v2 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH 2/3] DMA: AT91: Get residual bytes in dma buffer   Vinod Koul
• [PATCH] sdhci: sirf: add mmc host sdhci-pltfm based driver for SiRF SoCs   Barry Song
• [PATCH] Sound: sgtl5000 Allow codec clock frequency to be set.   Martin Fuzzey
• [PATCH] serial: 8250_dw: add support for clk api   Heikki Krogerus
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Uwe Kleine-König
• [PATCH 2/6] usb: otg: mv_otg: remove unused clock   Chao Xie
• Integrator PCI base dilemma   Linus Walleij
• [PATCH 2/6] usb: otg: mv_otg: remove unused clock   Kishon Vijay Abraham I
• [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support   Nicolas Ferre
• [PATCH 2/6] usb: otg: mv_otg: remove unused clock   Felipe Balbi
• [PATCH V2] DMA: PL330: Add check if device tree compatible   Vinod Koul
• [PATCH] ARM: EXYNOS5440: DTS: Add virtual GIC DT bindings   Giridhar Maruthy
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• Fwd: [PATCH] ARM: EXYNOS5440: DTS: Add virtual GIC DT bindings   Giridhar Maruthy
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Ezequiel Garcia
• [PATCH] clk: add table lookup to mux   Peter De Schrijver
• [PATCH] DMA: OF: Check properties value before running be32_to_cpup() on it   Vinod Koul
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Nicolas Ferre
• [PATCH 1/2] dmaengine: add const for name parameter   Vinod Koul
• [PATCH v3 2/2] crypto: sahara: Add driver for SAHARA2 accelerator.   Herbert Xu
• [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()   Herbert Xu
• [PATCH 2/2] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Vinod Koul
• [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver   Wolfram Sang
• [PATCH 0/3 v3] ARM: shmobile: add R8A7778 Bock-W board support v3   Kuninori Morimoto
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration   Wolfram Sang
• [PATCH] rtc: at91rm9200: add DT support   Nicolas Ferre
• [PATCH 1/3 v3] ARM: shmobile: add R8A7778 basis support   Kuninori Morimoto
• [PATCH 2/3 v3] ARM: shmobile: r8a7778 SCIF support   Kuninori Morimoto
• [PATCH 3/3 v3] ARM: shmobile: add R-Car M1A Bock-W platform support   Kuninori Morimoto
• [PATCH] dmaengine:sirf:take clock and enable it while probing   Vinod Koul
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Andrew Lunn
• [PATCH] sdhci: sirf: add mmc host sdhci-pltfm based driver for SiRF SoCs   Arnd Bergmann
• [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()   Fabio Porcedda
• [PATCH] DMA: OF: Check properties value before running be32_to_cpup() on it   Viresh Kumar
• [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()   Herbert Xu
• [PATCH v3 0/9] refactoring for mask_cache   Gerlando Falauto
• [PATCH] DMA: OF: Check properties value before running be32_to_cpup() on it   Vinod Koul
• [PATCH 0/3 v3] ARM: shmobile: add R8A7778 Bock-W board support v3   Simon Horman
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration   Heiko Stübner
• [PATCH v3 0/9] refactoring for mask_cache   Simon Guinot
• [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver   Heiko Stübner
• [PATCH v3 0/9] refactoring for mask_cache   Simon Guinot
• [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver   Wolfram Sang
• [PATCH v2] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Rajendra Nayak
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Mark Rutland
• [PATCH v2 06/12] i2c: i2c-mxs: move to use generic DMA helper   Wolfram Sang
• [PATCH v2] ARM: ux500: select WATCHDOG and MUSB for ux500   Fabio Baltieri
• [PATCH v2] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Santosh Shilimkar
• [PATCH v3 0/9] refactoring for mask_cache   Gerlando Falauto
• [PATCH] ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIG   Paul Bolle
• [PATCH] DMA: OF: Check properties value before running be32_to_cpup() on it   Amit Kucheria
• [PATCH] Revert "ARM: shmobile: streamline mackerel SD and MMC devices"   Simon Horman
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Marc Zyngier
• [PATCH 00/04] ARM: shmobile: r8a7790 SoC and Lager board support   Sergei Shtylyov
• [PATCHv3 00/14] drivers: mailbox: framework creation   Linus Walleij
• [PATCH v2 0/7] pcmcia: at91_cf: clean up and add DT support   Nicolas Ferre
• [PATCH v2 1/7] pcmcia: at91_cf: fix gpio_get_value in at91_cf_get_status   Nicolas Ferre
• [PATCH v2 2/7] pcmcia: at91_cf: convert to dev_ print functions   Nicolas Ferre
• [PATCH v2 3/7] pcmcia: at91_cf: use devm_ functions for allocations   Nicolas Ferre
• [PATCH v2 4/7] pcmcia: at91_cf: clean up header includes   Nicolas Ferre
• [PATCH v2 5/7] pcmcia: at91_cf: add support for DT   Nicolas Ferre
• [PATCH v2 6/7] pcmcia: at91_cf: use module_platform_driver_probe()   Nicolas Ferre
• [PATCH v2 7/7] pcmcia/trivial: at91_cf: fix checkpatch error   Nicolas Ferre
• [PATCH 0/6] ARM: ux500: first multiplatform series   Linus Walleij
• [PATCH 1/6] ARM: ux500: move debugmacro to debug includes   Linus Walleij
• [PATCH 2/6] clk: ux500: pass clock base adresses in init call   Linus Walleij
• [PATCH 3/6] mfd: prcmu: pass a base and size with the early initcall   Linus Walleij
• [PATCH 4/6] mfd: db8500-prcmu: get base address from resource   Linus Walleij
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Linus Walleij
• [PATCH 6/6] ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>   Linus Walleij
• [PATCH v4 2/2] i2c: pxa: Use i2c-core to get bus number now   Wolfram Sang
• [PATCH 16/29] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
• [PATCH] dmaengine:sirf:take clock and enable it while probing   Barry Song
• [PATCH 1/6] ARM: ux500: move debugmacro to debug includes   Arnd Bergmann
• [PATCH 2/6] clk: ux500: pass clock base adresses in init call   Arnd Bergmann
• [PATCH 3/6] mfd: prcmu: pass a base and size with the early initcall   Arnd Bergmann
• [BUGFIX PATCH] ARM: OMAP: fix type of return values in omap_device_get_by_hwmod_name()   Lothar Waßmann
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Rickard Andersson
• [PATCH 4/6] mfd: db8500-prcmu: get base address from resource   Arnd Bergmann
• [PATCH 6/6] ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>   Arnd Bergmann
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Daniel Lezcano
• [PATCH v3] ARM: ux500: select WATCHDOG and MUSB for ux500   Fabio Baltieri
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Rob Herring
• [PATCH] dmaengine:sirf:take clock and enable it while probing   Vinod Koul
• [PATCH 1/2] dmaengine: add const for name parameter   Vinod Koul
• Integrator PCI base dilemma   Arnd Bergmann
• [PATCH v3 2/7] clocksource: sh_cmt: Add OF support   Simon Horman
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Rajendra Nayak
• [PATCH 1/2] dmaengine: add const for name parameter   Markus Pargmann
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()   Fabio Porcedda
• Integrator PCI base dilemma   Rob Herring
• [PATCH 00/11] sp804 and integrator timer CLKSRC_OF support   Arnd Bergmann
• [PATCH v3 1/3] ARM: shmobile: sh73a0: wait for completion when kicking the clock   Simon Horman
• [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM   Bastian Hecht
• [PATCH 2/2] ARM: shmobile: sh73a0: Suspend-to-RAM Power Off mode   Bastian Hecht
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Andrew Lunn
• [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM   Bastian Hecht
• [PATCH V2 0/4] ARM: tegra: dalmore: add regulators   Laxman Dewangan
• [PATCH V2 1/4] ARM: tegra: dalmore: add cpu regulator node   Laxman Dewangan
• [PATCH V2 2/4] ARM: tegra: dalmore: add TPS65090 node   Laxman Dewangan
• [PATCH V2 3/4] ARM: tegra: dalmore: add fixed regulator node   Laxman Dewangan
• [PATCH V2 4/4] ARM: tegra: enable Tegra114 based platform PMICs   Laxman Dewangan
• [PATCH V2 0/3] clk: Fixup issues for clk_set_parent   Ulf Hansson
• [PATCH V2 1/3] clk: Restructure code for __clk_reparent   Ulf Hansson
• [PATCH V2 2/3] clk: Improve errorhandling for clk_set_parent   Ulf Hansson
• [PATCH V2 3/3] clk: Fixup locking issues for clk_set_parent   Ulf Hansson
• [PATCH] ARM: OMAP4: clock: Initialize USB DPLL   Roger Quadros
• [PATCH] mfd: ab8500-core: Ignore masked out interrupts   Fabio Baltieri
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH] ARM: OMAP4: clock: Initialize USB DPLL   Roger Quadros
• [PATCH v2] mmc: mvsdio: fix non-DT probing of GPIOs   Ralph Droms
• [PATCH 3/6] mfd: prcmu: pass a base and size with the early initcall   Ulf Hansson
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Christopher Covington
• [PATCH 15/16] ARM: mvebu: Add thermal support to Armada 370 device tree   Sergei Shtylyov
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Rajendra Nayak
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Sergei Shtylyov
• [PATCH 2/6] clk: ux500: pass clock base adresses in init call   Ulf Hansson
• [PATCH 00/11] sp804 and integrator timer CLKSRC_OF support   Rob Herring
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH V2 1/4] ARM: tegra: dalmore: add cpu regulator node   Sergei Shtylyov
• [PATCH v2 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver   Heiko Stübner
• [PATCH v2 2/2] i2c: s3c2410: fixup the styling of the newly moved register definitions   Heiko Stübner
• [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH] ARM: OMAP4: clock: Initialize USB DPLL   Roger Quadros
• [PATCH 01/11] OF: add empty of_device_is_available for !OF   Mark Rutland
• [PATCH 01/11] OF: add empty of_device_is_available for !OF   Rob Herring
• [PATCH 05/16] thermal: mvebu: Fix valid check for thermal register   Jason Cooper
• [PATCH for 3.8+] drivers/video/ep93xx-fb.c: fix missing declaration of devm_ioremap()   Hauke Mehrtens
• [PATCH 08/16] thermal: mvebu: Fix temperature output formula for kirkwood   Jason Cooper
• [PATCH] ARM: OMAP4: Enable fix for Cortex-A9 erratas   Sricharan R
• [PATCH] DMA: of: const name fixup   Markus Pargmann
• [PATCH V2 3/3] ARM: imx: enable RBC to support anatop LPM mode   Anson Huang
• [PATCH 2/2] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Shawn Guo
• [PATCH v2] mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO   Lee Jones
• [PATCH 1/2] dmaengine: add const for name parameter   Shawn Guo
• [PATCH V3 3/3] ARM: imx: enable RBC to support anatop LPM mode   Anson Huang
• [PATCH] DTS at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcd   Nicolas Ferre
• [PATCH] DTS at91sam9x5cm: add 1-wire chip on CM board   Nicolas Ferre
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Lars-Peter Clausen
• [PATCH] DTS at91sam9x5ek: i2c1 and i2c2 conflict with macb and lcd   Ludovic Desroches
• [PATCH 05/16] thermal: mvebu: Fix valid check for thermal register   Ezequiel Garcia
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Ezequiel Garcia
• [PATCH 15/16] ARM: mvebu: Add thermal support to Armada 370 device tree   Ezequiel Garcia
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Mark Brown
• [PATCH 05/16] thermal: mvebu: Fix valid check for thermal register   Jason Cooper
• [GIT PULL] at91: dt for 3.10 #1   Nicolas Ferre
• [PATCH 3/3] ARM: EXYNOS5250: Register architected timers   Alexander Graf
• [PATCH 00/46] Regulators: Bring the AB8500 into the 21st century   Lee Jones
• [PATCH 01/46] regulator: ab8500: Further populate initialisation registers   Lee Jones
• [PATCH 02/46] regulator: ab8500: Add set_mode/get_mode support   Lee Jones
• [PATCH 03/46] regulator: ab8500: Added get_optimum_mode on regulators with idle mode   Lee Jones
• [PATCH 04/46] ARM: ux500: regulators: Add mask for configuration   Lee Jones
• [PATCH 05/46] regulator: ab8500: Another push to synchronise recent AB8500 developments   Lee Jones
• [PATCH 06/46] regulator: ab8500: Separate regulator and MFD platform data   Lee Jones
• [PATCH 07/46] regulator: ab8500: Add support of low voltage battery   Lee Jones
• [PATCH 08/46] ARM: ux500: Update displays in vaux1 consumer list   Lee Jones
• [PATCH 09/46] regulator: ab8500-ext: Add HW request support   Lee Jones
• [PATCH 10/46] regulator: ab8500-ext: Add suspend support   Lee Jones
• [PATCH 11/46] regulator: ab8500: Remove USB regulator   Lee Jones
• [PATCH 12/46] regulator: ab8500: Init debug from regulator driver   Lee Jones
• [PATCH 13/46] ARM: ux500: Add supply for the L3G4200D Gyroscope   Lee Jones
• [PATCH 14/46] ARM: ux500: Add supply for the Ambient light sensor device   Lee Jones
• [PATCH 15/46] ARM: ux500: Add supply for the Pressure sensor   Lee Jones
• [PATCH 16/46] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen   Lee Jones
• [PATCH 17/46] ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1   Lee Jones
• [PATCH 18/46] regulator: ab8500: Clean out SoC registers   Lee Jones
• [PATCH 19/46] regulator: ab8500: Prepare the driver for additional platforms   Lee Jones
• [PATCH 20/46] regulator: ab8500: Add support for the ab9540   Lee Jones
• [PATCH 21/46] regulator: ab8500: Correct TVOUT regulator start-up delay   Lee Jones
• [PATCH 22/46] regulator: ab8500-ext: Add support for AB8505/AB9540   Lee Jones
• [PATCH 23/46] regulator: ab8500: add support for ab8505   Lee Jones
• [PATCH 24/46] ARM: ux500: regulator: Add accelerometer and fix magnetometer supply device ID   Lee Jones
• [PATCH 25/46] regulator: ab8500-ext: Add support for AB9540 regulators   Lee Jones
• [PATCH 26/46] regulator: ab8500: Add support for the ab8540   Lee Jones
• [PATCH 27/46] regulator: ab8500: Update voltage handling for fixed voltage regulators   Lee Jones
• [PATCH 28/46] regulator: ab8500: Delete useless fixed_uV field   Lee Jones
• [PATCH 29/46] regulator: ab8500: Use regulator_list_voltage_table()   Lee Jones
• [PATCH 30/46] regulator: ab8500: Supply platform specific regulator id values   Lee Jones
• [PATCH 31/46] regulator: ab8500: Don't register external regulators on AB8505   Lee Jones
• [PATCH 32/46] regulator: ab8500: Add voltage selection for AUDIO and ANA on AB8505   Lee Jones
• [PATCH 33/46] regulator: ab8500: Also check for AB8505 based platforms   Lee Jones
• [PATCH 34/46] regulator: ab8500: Add new operations for Vaux3   Lee Jones
• [PATCH 35/46] regulator: ab8500: Add mode operation for v-amic   Lee Jones
• [PATCH 36/46] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540   Lee Jones
• [PATCH 37/46] regulator: ab8500-ext: Adapt regulator registration for newly changed API   Lee Jones
• [PATCH 38/46] regulator: ab8500: Use a struct to select the good regulator configuration   Lee Jones
• [PATCH 39/46] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540   Lee Jones
• [PATCH 40/46] regulator: ab8500: Set enable enable_time in regulator_desc   Lee Jones
• [PATCH 41/46] regulator: ab8500: Remove the need for a 'delay' property   Lee Jones
• [PATCH 42/46] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages   Lee Jones
• [PATCH 43/46] ARM: ux500: Pass regulator platform data using the new format   Lee Jones
• [PATCH 44/46] regulator: ab8500: Amend the update value for AB8500_LDO_INTCORE regulator   Lee Jones
• [PATCH 45/46] regulator: ab8500: Shuffle init functions into a more logical order   Lee Jones
• [PATCH 46/46] ARM: ux500: Regulators: Bring the AB8500 regulator platform data up-to-date   Lee Jones
• [PATCH 0/3] ARM: shmobile: kzm9g: add irqpin to DT   Guennadi Liakhovetski
• [PATCH 1/3] ARM: shmobile: irqpin: fix handling of spurious interrupts in DT case   Guennadi Liakhovetski
• [PATCH 2/3] ARM: shmobile: sh73a0: add irqpin DT nodes   Guennadi Liakhovetski
• [PATCH 3/3] ARM: shmobile: kzm9g-reference: add ethernet support   Guennadi Liakhovetski
• [PATCH] Sound: sgtl5000 Allow codec clock frequency to be set.   Timur Tabi
• Integrator PCI base dilemma   Arnd Bergmann
• [PATCH for 3.8+] drivers/video/ep93xx-fb.c: fix missing declaration of devm_ioremap()   H Hartley Sweeten
• [PATCH 0/5] arm: mvebu: Enable LPAE support for Armada XP SoCs   Gregory CLEMENT
• [PATCH 1/5] arm: mvebu: Aligne the internal registers virtual base to support LPAE   Gregory CLEMENT
• [PATCH 2/5] arm: mvebu: Select DMA_BOUNCE when LPAE is selected in Kconfig   Gregory CLEMENT
• [PATCH 3/5] arm: mvebu: Enable pj4b on LPAE compilations   Gregory CLEMENT
• [PATCH 4/5] arm: dts: Add a 64 bits version of the skeleton device tree   Gregory CLEMENT
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Gregory CLEMENT
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Lars-Peter Clausen
• [GIT PULL] at91: dt for 3.10 #1   Arnd Bergmann
• [GIT PULL] defconfig changes for ux500   Arnd Bergmann
• [GIT PULL] ux500 core changes for v3.10   Arnd Bergmann
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Sören Brinkmann
• [GIT PULL] imx fixes for 3.9, take 3   Arnd Bergmann
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Mark Brown
• [GIT PULL] Renesas ARM and SH based SoC pinmux update for v3.10   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC defconfig updates for v3.10   Arnd Bergmann
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH v3 1/7] bus: introduce an Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH v3 2/7] arm: mach-mvebu: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH v3 3/7] arm: mach-kirkwood: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH v3 4/7] arm: mach-dove: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH v3 5/7] arm: mach-orion5x: convert to use mvebu-mbus driver   Thomas Petazzoni
• [PATCH v3 6/7] arm: mach-mv78xx0: convert to use the mvebu-mbus driver   Thomas Petazzoni
• [PATCH v3 7/7] arm: plat-orion: remove addr-map code   Thomas Petazzoni
• [GIT PULL] Renesas ARM-based SoC updates for v3.10   Arnd Bergmann
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [GIT PULL v2] Renesas INTC External IRQ pin driver   Arnd Bergmann
• [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data   Stephen Warren
• [PATCH 4/6] mfd: db8500-prcmu: get base address from resource   Linus Walleij
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Arnd Bergmann
• [PATCH v5 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCH v5 02/17] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
• [PATCH v5 03/17] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
• [PATCH v5 04/17] pci: infrastructure to add drivers in drivers/pci/host   Thomas Petazzoni
• [PATCH v5 05/17] arm: pci: add a align_resource hook   Thomas Petazzoni
• [PATCH v5 06/17] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
• [PATCH v5 07/17] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
• [PATCH v5 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCH v5 09/17] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
• [PATCH v5 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [PATCH v5 11/17] arm: mvebu: add PCIe Device Tree informations for Armada XP   Thomas Petazzoni
• [PATCH v5 12/17] arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4   Thomas Petazzoni
• [PATCH v5 13/17] arm: mvebu: PCIe Device Tree informations for Armada XP DB   Thomas Petazzoni
• [PATCH v5 14/17] arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox   Thomas Petazzoni
• [PATCH v5 15/17] arm: mvebu: PCIe Device Tree informations for Armada 370 DB   Thomas Petazzoni
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Arnd Bergmann
• [PATCH v5 16/17] arm: mvebu: PCIe Device Tree informations for Armada XP GP   Thomas Petazzoni
• [PATCH v5 17/17] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
• [PATCH V2 1/4] ARM: tegra: dalmore: add cpu regulator node   Stephen Warren
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Jason Gunthorpe
• [PATCH] USB: EHCI: fix for leaking isochronous data   Jason Cooper
• [RFC 0/8]: omap4: clk: move clock data under drivers/clk   Tero Kristo
• [PATCH] Sound: sgtl5000 Allow codec clock frequency to be set.   Martin Fuzzey
• [PATCH] ARM: sched_clock: Add more notrace to prevent recursion   Stephen Boyd
• [PATCH 2/6] clk: ux500: pass clock base adresses in init call   Mike Turquette
• [PATCH] pinctrl: mvebu: fix checking for SoC specific controls   Linus Walleij
• [PATCH] Sound: sgtl5000 Allow codec clock frequency to be set.   Timur Tabi
• [PATCH 02/11] ARM: remove extra timer-sp control register clearing   Linus Walleij
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Rob Herring
• [PATCH v2] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Mike Turquette
• [PATCH 03/11] ARM: timer-sp: convert to use CLKSRC_OF init   Linus Walleij
• [PATCH 02/11] ARM: remove extra timer-sp control register clearing   Rob Herring
• [PATCH 09/11] ARM: integrator-cp: convert use CLKSRC_OF for timer init   Linus Walleij
• [PATCH v3] clk: add si5351 i2c common clock driver   Lars-Peter Clausen
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Mark Rutland
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCH 10/11] ARM: move sp804 and integrator timers to drivers/clocksource   Linus Walleij
• [PATCH 2/5] arm: mvebu: Select DMA_BOUNCE when LPAE is selected in Kconfig   Rob Herring
• [PATCH REPOST 1/7] kbuild: create an "include chroot" for DT bindings   Stephen Warren
• [PATCH REPOST 2/7] kbuild: fixdep: support concatenated dep files   Stephen Warren
• [PATCH REPOST 3/7] kbuild: cmd_dtc_cpp: extract deps from both gcc -E and dtc   Stephen Warren
• [PATCH REPOST 4/7] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp   Stephen Warren
• [PATCH REPOST 5/7] ARM: dt: add header to define GPIO flags   Stephen Warren
• [PATCH REPOST 6/7] ARM: dt: add header to define IRQ flags   Stephen Warren
• [PATCH REPOST 7/7] ARM: dt: create a DT header for the GIC   Stephen Warren
• RFC v2: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH] mach_omap2: use PTR_RET instead of IS_ERR + PTR_ERR   Silviu Popescu
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Jason Cooper
• [PATCH V3] ARM: mvebu: fix RAM size for Armada XP board DB-MV784MP-GP   Jason Cooper
• [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks   Mike Turquette
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Arnd Bergmann
• [PATCH 4/6] mfd: db8500-prcmu: get base address from resource   Arnd Bergmann
• [PATCH] USB: EHCI: fix for leaking isochronous data   Arnd Bergmann
• xen/arm: move to mach-virt and support SMP   Stefano Stabellini
• [PATCH 1/4] xen/arm: implement HYPERVISOR_vcpu_op   Stefano Stabellini
• [PATCH 2/4] xen/arm: SMP support   Stefano Stabellini
• [PATCH 3/4] xen: move the xenvm machine to mach-virt   Stefano Stabellini
• [PATCH 4/4] xenvm: add a simple PSCI node and a second cpu   Stefano Stabellini
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Russell King - ARM Linux
• [PATCH 2/5] arm: mvebu: Select DMA_BOUNCE when LPAE is selected in Kconfig   Andrew Lunn
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Thomas Petazzoni
• [PATCH 08/16] thermal: mvebu: Fix temperature output formula for kirkwood   Russell King - ARM Linux
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Arnd Bergmann
• [PATCH 02/11] ARM: remove extra timer-sp control register clearing   Russell King - ARM Linux
• [PATCH] USB: EHCI: fix for leaking isochronous data   Michael Trimarchi
• [PATCH 03/11] ARM: timer-sp: convert to use CLKSRC_OF init   Russell King - ARM Linux
• [PATCH 11/11] devtree: add binding documentation for sp804   Russell King - ARM Linux
• [PATCH 4/6 v2] mfd: db8500-prcmu: get base address from resource   Linus Walleij
• [PATCH] ARM: mvebu: Add button on Armada 370 Reference Design board   Ezequiel Garcia
• [PATCH 05/16] thermal: mvebu: Fix valid check for thermal register   Ezequiel Garcia
• [PATCH V4 8/9] ARM: tegra: Provide regulator to pwm-backlight   Stephen Warren
• [PATCH 05/16] thermal: mvebu: Fix valid check for thermal register   Jason Cooper
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Andrew Lunn
• [PATCH 06/16] thermal: mvebu: Convert to devm_ioremap_resource()   Ezequiel Garcia
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Thomas Petazzoni
• [PATCH 4/6] mfd: db8500-prcmu: get base address from resource   Loic PALLARDY
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Jason Cooper
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Andrew Lunn
• [PATCH 08/16] thermal: mvebu: Fix temperature output formula for kirkwood   Ezequiel Garcia
• [PATCH for 3.9] thermal: mvebu: Fix valid check for thermal register   Ezequiel Garcia
• [PATCH V2 1/3] clk: Restructure code for __clk_reparent   Mike Turquette
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Jason Gunthorpe
• [PATCH V2 2/3] clk: Improve errorhandling for clk_set_parent   Mike Turquette
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Thomas Petazzoni
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Thomas Petazzoni
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Thomas Petazzoni
• [PATCH] USB: EHCI: fix for leaking isochronous data   Andrew Lunn
• [PATCH v8 12/12] clk: add a clock driver for palmas   Mike Turquette
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Andrew Lunn
• [PATCH v9 0/3] ARM: ARMv7 (i.e. Cortex-M3) support   Uwe Kleine-König
• [PATCH v9 1/3] ARM: Add base support for ARMv7-M   Uwe Kleine-König
• [PATCH v9 2/3] ARM: ARMv7-M: Add support for exception handling   Uwe Kleine-König
• [PATCH v9 3/3] ARM: ARMv7-M: Allow the building of new kernel port   Uwe Kleine-König
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Arnd Bergmann
• [PATCH v3] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Andrew Morton
• [PATCH] clk:SPEAr1340: Correct parent clock configuration   Mike Turquette
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Lior Amsalem
• [PATCH] ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"   Paul Bolle
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Jason Gunthorpe
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Jason Gunthorpe
• [PATCH 1/4] ARM: context tracking: add exception support   Russell King - ARM Linux
• [PATCH 0/9] More ux500 multiplatform stuff   Arnd Bergmann
• [PATCH 1/9] ARM: ux500: move mach/msp.h to include/linux/platform_data.h   Arnd Bergmann
• [PATCH 2/9] ARM: ux500: split out prcmu initialization   Arnd Bergmann
• [PATCH 3/9] ARM: ux500: make irqs.h local to platform   Arnd Bergmann
• [PATCH 4/9] ARM: ux500: kill mach/hardware.h some more   Arnd Bergmann
• [PATCH 5/9] staging: ste_rmi4: kill platform_data hack   Arnd Bergmann
• [PATCH 6/9] power: pm2301_charger: remove __devinit annotations   Arnd Bergmann
• [PATCH 7/9] ARM: ux500: make remaining headers local   Arnd Bergmann
• [PATCH 8/9] ARM: ux500: move to multiplatform   Arnd Bergmann
• [PATCH 9/9] ARM: ux500: build hotplug.o for ARMv7-a   Arnd Bergmann
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH v2 0/3] clock driver for sunxi   Mike Turquette
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Lior Amsalem
• [PATCH for 3.8+] drivers/video/ep93xx-fb.c: fix missing declaration of devm_ioremap()   Ryan Mallon
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Rob Herring
• [PATCH] USB: EHCI: fix for leaking isochronous data   Soeren Moch
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Sebastian Hesselbarth
• [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare   Mike Turquette
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Sebastian Hesselbarth
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Mike Turquette
• Request the linux-next inclusion for IMX/MXS tree   Stephen Rothwell
• [PATCHv3 00/14] drivers: mailbox: framework creation   Stephen Rothwell
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Kukjin Kim
• [PATCHv3 00/14] drivers: mailbox: framework creation   Anna, Suman
• Integrator PCI base dilemma   Russell King - ARM Linux
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Rafael J. Wysocki
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Colin Cross
• [PATCH] cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro   Paul Bolle
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [PATCH 1/4] ARM: context tracking: add exception support   Kevin Hilman
• [GIT PULL] Renesas ARM-based SoC defconfig updates for v3.10   Simon Horman
• [GIT PULL] Renesas ARM and SH based SoC pinmux update for v3.10   Simon Horman
• [GIT PULL] Renesas ARM-based SoC updates for v3.10   Simon Horman
• [GIT PULL v2] Renesas INTC External IRQ pin driver   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [PATCH 1/1 v2 net-next] net: fec: fix the build as module   Frank Li
• [GIT PULL] Renesas ARM-based SoC board updates for v3.10 #2   Simon Horman
• [PATCH 1/6] ARM: shmobile: kzm9g: SDHI0 and SDHI1 use a 3.3V power supply   Simon Horman
• [PATCH 2/6] ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi   Simon Horman
• [PATCH 3/6] ARM: shmobile: armadillo800eva: add a fixed voltage regulator for SDHI1   Simon Horman
• [PATCH 4/6] ARM: shmobile: kzm9g: add fixed voltage regulators for SDHI0 and SDHI2   Simon Horman
• [PATCH 5/6] ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names   Simon Horman
• [PATCH 6/6] Revert "ARM: shmobile: streamline mackerel SD and MMC devices"   Simon Horman
• [PATCH V4 0/9] Add mandatory regulator for all users of pwm-backlight.   Alex Courbot
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH 03/11] ARM: timer-sp: convert to use CLKSRC_OF init   Rob Herring
• [PATCH 02/11] ARM: remove extra timer-sp control register clearing   Rob Herring
• [PATCH 1/1 v2 net-next] net: fec: fix the build as module   Fabio Estevam
• [PATCH 1/1 v2 net-next] net: fec: fix the build as module   Frank Li
• linux-next: manual merge of the imx-mxs tree with the arm-soc tree   Stephen Rothwell
• [RFC 0/8]: omap4: clk: move clock data under drivers/clk   Rajendra Nayak
• [PATCH v2 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Sekhar Nori
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Andrew Lunn
• [GIT PULL v2] Renesas INTC External IRQ pin driver   Arnd Bergmann
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Arnd Bergmann
• [PATCH 0/3] ARM: shmobile: Add SMSC support on Bock-W   Kuninori Morimoto
• [RFC][PATCH 1/3] ARM: shmobile: define PLATFORM_xxx_INFO()   Kuninori Morimoto
• [RFC][PATCH 2/3] ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()   Kuninori Morimoto
• [RFC][PATCH 3/3] ARM: shmobile: bockw: add SMSC ethernet support   Kuninori Morimoto
• [PATCH 0/2] davinci: vpss: clock cleanup   Prabhakar lad
• [PATCH 1/2] media: davinci: vpss: enable vpss clocks   Prabhakar lad
• [PATCH 2/2] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Prabhakar lad
• [PATCH v7 0/2] ARM: davinci: add support for dm365 vpbe display   Prabhakar lad
• [PATCH v7 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar lad
• [PATCH v7 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Prabhakar lad
• [PATCH 2/2] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Sebastien Guiriec
• [PATCH v2 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip, Avinash
• [PATCH v6 0/2] ARM: davinci: dm355: add support for vpbe display   Prabhakar lad
• [PATCH v6 1/2] ARM: davinci: dm355: add support for v4l2 video display   Prabhakar lad
• [PATCH v6 2/2] ARM: davinci: dm355 EVM: add support for VPBE display   Prabhakar lad
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Rickard Andersson
• [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks   Tero Kristo
• [PATCH 2/2] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open()   Shawn Guo
• [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support   Nicolas Ferre
• [PATCH] ARM: mvebu: Add button on Armada 370 Reference Design board   Florian Fainelli
• [RFC 0/8]: omap4: clk: move clock data under drivers/clk   Tero Kristo
• [PATCH V2] Sound: sgtl5000 Allow codec clock frequency to be set.   Martin Fuzzey
• Integrator PCI base dilemma   Arnd Bergmann
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Arnd Bergmann
• [PATCH V2 2/3] clk: Improve errorhandling for clk_set_parent   Rajagopal Venkat
• [PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property   Thierry Reding
• [PATCH] MAINTAINERS: add maintainer entry for atmel i2c driver   Wolfram Sang
• [PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCH v2 0/3] clock driver for sunxi   Maxime Ripard
• [PATCH V4 8/9] ARM: tegra: Provide regulator to pwm-backlight   Thierry Reding
• Integrator PCI base dilemma   Russell King - ARM Linux
• [PATCH v2] pwm: davinci: Add Kconfig support for ECAP & EHRPWM devices   Thierry Reding
• [PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH 06/46] regulator: ab8500: Separate regulator and MFD platform data   Mark Brown
• Integrator PCI base dilemma   Russell King - ARM Linux
• [PATCH V2 1/3] clk: Restructure code for __clk_reparent   Ulf Hansson
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Russell King - ARM Linux
• [PATCH V2 2/3] clk: Improve errorhandling for clk_set_parent   Ulf Hansson
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Russell King - ARM Linux
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Sekhar Nori
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Mark Brown
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Russell King - ARM Linux
• [PATCH 2/5] arm: mvebu: Select DMA_BOUNCE when LPAE is selected in Kconfig   Russell King - ARM Linux
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Lars-Peter Clausen
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Lars-Peter Clausen
• [alsa-devel] [PATCH 0/2] ASoC: dmaengine_pcm: support generic DMA binding users   Mark Brown
• [PATCH 03/11] ARM: timer-sp: convert to use CLKSRC_OF init   Russell King - ARM Linux
• Integrator PCI base dilemma   Arnd Bergmann
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Peter De Schrijver
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Peter De Schrijver
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Christopher Covington
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Peter De Schrijver
• [PATCH REPOST v2] clk: add table lookup to mux   Peter De Schrijver
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Peter De Schrijver
• Integrator PCI base dilemma   Russell King - ARM Linux
• [PATCH 6/9] power: pm2301_charger: remove __devinit annotations   Linus Walleij
• [PATCH REPOST v2] clk: add table lookup to mux   Peter De Schrijver
• [PATCH for 3.9 0/2] thermal: Marvell SoC thermal formula fixes   Ezequiel Garcia
• [PATCH 1/2] thermal: kirkwood: Fix thermal sensor formula   Ezequiel Garcia
• [PATCH 2/2] thermal: dove: Fix thermal sensor formula   Ezequiel Garcia
• [PATCH 3/4] xen: move the xenvm machine to mach-virt   Marc Zyngier
• [RFC PATCH v3 0/6] sched: packing small tasks   Vincent Guittot
• [RFC PATCH v3 1/6] Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking"   Vincent Guittot
• [RFC PATCH v3 2/6] sched: add a new SD_SHARE_POWERDOMAIN flag for sched_domain   Vincent Guittot
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [RFC PATCH v3 4/6] sched: secure access to other CPU statistics   Vincent Guittot
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Vincent Guittot
• [RFC PATCH v3 6/6] ARM: sched: clear SD_SHARE_POWERDOMAIN   Vincent Guittot
• Integrator PCI base dilemma   Arnd Bergmann
• [PATCH v8 00/14] Tegra114 clockframework   Peter De Schrijver
• [PATCH v8 01/14] clk: tegra: provide dummy cpu car ops   Peter De Schrijver
• [PATCH v8 02/14] clk: tegra: Refactor PLL programming code   Peter De Schrijver
• [PATCH v8 03/14] clk: tegra: Add TEGRA_PLL_BYPASS flag   Peter De Schrijver
• [PATCH v8 04/14] clk: tegra: introduce TEGRA_PLL_HAS_LOCK_ENABLE   Peter De Schrijver
• [PATCH v8 05/14] clk: tegra: Add PLL post divider table   Peter De Schrijver
• [PATCH v8 06/14] clk: tegra: move from a lock bit idx to a lock mask   Peter De Schrijver
• [PATCH v8 07/14] clk: tegra: Add new fields and PLL types for Tegra114   Peter De Schrijver
• [PATCH v8 08/14] clk: tegra: Add flags to tegra_clk_periph()   Peter De Schrijver
• [PATCH v8 09/14] clk: tegra: Workaround for Tegra114 MSENC problem   Peter De Schrijver
• [PATCH v8 10/14] ARM: tegra: Define Tegra114 CAR binding   Peter De Schrijver
• [PATCH v8 11/14] clk: tegra: Implement clocks for Tegra114   Peter De Schrijver
• [PATCH v8 12/14] clk: tegra: devicetree match for nvidia, tegra114-car   Peter De Schrijver
• [PATCH v8 13/14] ARM: dt: Add references to tegra_car clocks   Peter De Schrijver
• [PATCH v8 14/14] clk: tegra: Remove forced clk_enable of uartd   Peter De Schrijver
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Arnd Bergmann
• [GIT PULL] Renesas ARM-based SoC board updates for v3.10 #2   Arnd Bergmann
• [PATCH v8 00/14] Tegra114 clockframework   Peter De Schrijver
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Rob Herring
• [PATCH 0/9] More ux500 multiplatform stuff   Linus Walleij
• [PATCH v3 0/6] introduce support for Atmel Cortex-A5 devices   ludovic.desroches at atmel.com
• [PATCH 1/6] ARM: at91: change name template in AT91_SOC_START macro   ludovic.desroches at atmel.com
• [PATCH 2/6] ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation   ludovic.desroches at atmel.com
• [PATCH 3/6] ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch   ludovic.desroches at atmel.com
• [PATCH 4/6] ARM: at91: introduce SAMA5 support   ludovic.desroches at atmel.com
• [PATCH 5/6] ARM: at91: dt: add device tree files for SAMA5D3 family   ludovic.desroches at atmel.com
• [PATCH 6/6] ARM: at91: add defconfig for SAMA5   ludovic.desroches at atmel.com
• [PATCH for 3.9 v3] mmc: mvsdio: fix non-DT probing of GPIOs   Thomas Petazzoni
• [PATCH 0/9] More ux500 multiplatform stuff   Arnd Bergmann
• [PATCH v9 0/12] Palmas updates   Ian Lartey
• [PATCH v9 01/11] mfd: palmas: is_palmas_charger needed by multiple drivers   Ian Lartey
• [PATCH v9 02/11] mfd: palmas add variant and OTP detection   Ian Lartey
• [PATCH v9 03/11] watchdog: add Palmas Watchdog support   Ian Lartey
• [PATCH v9 04/11] watchdog: Kconfig for Palmas watchdog   Ian Lartey
• [PATCH v9 05/11] gpio: palmas: add in GPIO support for palmas charger   Ian Lartey
• [PATCH v9 06/11] gpio: palmas: Enable DT support for palmas gpio.   Ian Lartey
• [PATCH v9 07/11] gpio: Palmas palmas_gpio_(read|write|update) factoring   Ian Lartey
• [PATCH v9 08/11] leds: Add support for Palmas LEDs   Ian Lartey
• [PATCH v9 09/11] clk: add a clock driver for palmas   Ian Lartey
• [PATCH v9 10/11] clk: Kconfig for Palmas clock driver   Ian Lartey
• [PATCH v9 11/11] regulator: palmas remove palmas-charger option from DT bindings   Ian Lartey
• [PATCH 0/9] More ux500 multiplatform stuff   Linus Walleij
• [PATCH for 3.10 v2] mmc: mvsdio: use dev_*() API instead of pr_*() API   Thomas Petazzoni
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 1/4 v3] net: mvmdio: allow platform device style registration   Florian Fainelli
• [PATCH 2/4 v3] net: mvmdio: rename base register cookie from smireg to regs   Florian Fainelli
• [PATCH 3/4 v3] net: mvmdio: enhance driver to support SMI error/done interrupts   Florian Fainelli
• [PATCH 4/4 v3] mv643xx_eth: convert to use the Marvell Orion MDIO driver   Florian Fainelli
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   Thomas Petazzoni
• [PATCH v9 08/11] leds: Add support for Palmas LEDs   Graeme Gregory
• [PATCH v9 08/11] leds: Add support for Palmas LEDs   Ian Lartey
• [PATCH V2] Sound: sgtl5000 Allow codec clock frequency to be set.   Timur Tabi
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   Jason Cooper
• [PATCH 0/9] More ux500 multiplatform stuff   Arnd Bergmann
• [PATCH 0/6] clk: sunxi: gates support   Emilio López
• [PATCH 1/6] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Emilio López
• [PATCH 2/6] arm: sunxi: Add clock definitions for AXI, AHB, APB0, APB1 gates   Emilio López
• [PATCH 3/6] arm: sunxi: use the right clock phandles for UARTs   Emilio López
• [PATCH 4/6] pinctrl: sunxi: add clock support   Emilio López
• [PATCH 5/6] arm: sunxi: Add clock to pinctrl node   Emilio López
• [PATCH 6/6] clk: sunxi: drop CLK_IGNORE_UNUSED   Emilio López
• [PATCH 00/16] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH 0/4] ARM: at91: little DT fixes   Nicolas Ferre
• [PATCH 1/4] ARM: at91/dt: fix macb node declaration   Nicolas Ferre
• [PATCH 2/4] ARM: at91/trivial: typos in compatible property   Nicolas Ferre
• [PATCH 3/4] ARM: at91/trivial: fix model name for SAM9G15-EK   Nicolas Ferre
• [PATCH 4/4] ARM: at91: remove partial parameter in bootargs for at91sam9x5ek.dtsi   Nicolas Ferre
• [PATCH] USB: EHCI: fix for leaking isochronous data   Alan Stern
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   David Miller
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Mike Turquette
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   Jason Cooper
• [PATCH 0/4 v3] mv643xx_eth: use mvmdio MDIO bus driver   Florian Fainelli
• [PATCH 0/9] More ux500 multiplatform stuff   Linus Walleij
• [PATCH] ARM: at91/at91sam9x5: add RTC node   Nicolas Ferre
• [PATCH 4/4] dmaengine: dw_dmac: simplify master selection   Andy Shevchenko
• [PATCH v10 0/12] Palmas updates   Ian Lartey
• [PATCH v10 01/12] mfd: DT bindings for the palmas family MFD   Ian Lartey
• [PATCH v10 02/12] mfd: palmas: is_palmas_charger needed by multiple drivers   Ian Lartey
• [PATCH v10 03/12] mfd: palmas add variant and OTP detection   Ian Lartey
• [PATCH v10 04/12] watchdog: add Palmas Watchdog support   Ian Lartey
• [PATCH v10 05/12] watchdog: Kconfig for Palmas watchdog   Ian Lartey
• [PATCH v10 06/12] gpio: palmas: add in GPIO support for palmas charger   Ian Lartey
• [PATCH v10 07/12] gpio: palmas: Enable DT support for palmas gpio.   Ian Lartey
• [PATCH v10 08/12] gpio: Palmas palmas_gpio_(read|write|update) factoring   Ian Lartey
• [PATCH v10 09/12] leds: Add support for Palmas LEDs   Ian Lartey
• [PATCH v10 10/12] clk: add a clock driver for palmas   Ian Lartey
• [PATCH v10 11/12] clk: Kconfig for Palmas clock driver   Ian Lartey
• [PATCH v10 12/12] regulator: palmas remove palmas-charger option from DT bindings   Ian Lartey
• [PATCH 6/9] power: pm2301_charger: remove __devinit annotations   Anton Vorontsov
• [PATCH 2/3] ARM: sched_clock: support 64-bit counters   Russell King - ARM Linux
• [PATCH 0/9] More ux500 multiplatform stuff   Arnd Bergmann
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Lee Jones
• [PATCH 2/5] ARM: ux500: Allow the ccu8540 to register its serial devices without pdata   Lee Jones
• [PATCH 3/5] ARM: ux500: Remove platform specific PRCMU and Clk initialisation   Lee Jones
• [PATCH 4/5] ARM: ux500: Supply a DTS file for the u8540 platform   Lee Jones
• [PATCH 5/5] ARM: ux500: Do not supply DMA platform data when booting u8540 platform   Lee Jones
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Arnd Bergmann
• [PATCH 5/5] ARM: ux500: Do not supply DMA platform data when booting u8540 platform   Arnd Bergmann
• [RFC PATCH v1 0/3] clk: implement remuxing during set_rate   James Hogan
• [RFC PATCH v1 1/3] clk: abstract parent cache   James Hogan
• [RFC PATCH v1 2/3] clk: add support for clock remuxing   James Hogan
• [RFC PATCH v1 3/3] clk: clk-mux: implement remuxing   James Hogan
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Thomas Petazzoni
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Arnd Bergmann
• [PATCH v2] cpufreq: instantiate cpufreq-cpu0 as a platform_driver   Guennadi Liakhovetski
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Stephen Warren
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support   Arnd Bergmann
• [PATCH v2] cpufreq: instantiate cpufreq-cpu0 as a platform_driver   Nishanth Menon
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support   Arnd Bergmann
• [PATCH REPOST v2] clk: add table lookup to mux   Stephen Warren
• [PULL] VGIC fixes for KVM/ARM   Marc Zyngier
• [PATCH] mmc: sdhci-s3c: let device core setup the default pin configuration   Chris Ball
• [BUGFIX PATCH] ARM: OMAP: fix type of return values in omap_device_get_by_hwmod_name()   Russell King - ARM Linux
• [PATCH] mach_omap2: use PTR_RET instead of IS_ERR + PTR_ERR   Russell King - ARM Linux
• [PATCH -next] mmc: wmt-sdmmc: remove unused variable in wmt_complete_data_request()   Chris Ball
• [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array   Jason Cooper
• [PATCH v2 0/3] clock driver for sunxi   Mike Turquette
• FW: Regulator API ignored return values   Chris Ball
• [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks   Mike Turquette
• [PATCH] ARM: at91/avr32/atmel-mci: fix DMA-channel leak on module unload   Chris Ball
• FW: Regulator API ignored return values   Arnd Bergmann
• [PATCH RFC] clk: divider: Tolerate 0 divider for one based dividers   Mike Turquette
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH] mmc: mvsdio: use dev_*() API instead of pr_*() API   Chris Ball
• [PULL] VGIC fixes for KVM/ARM   Russell King - ARM Linux
• [PATCH 5/5] ARM: ux500: Do not supply DMA platform data when booting u8540 platform   Lee Jones
• [PATCH] sdhci: sirf: add mmc host sdhci-pltfm based driver for SiRF SoCs   Chris Ball
• [PATCH for 3.9 v3] mmc: mvsdio: fix non-DT probing of GPIOs   Chris Ball
• [PATCH for 3.10 v2] mmc: mvsdio: use dev_*() API instead of pr_*() API   Chris Ball
• [PATCH] clk: prima2: fix return value check in sirfsoc_of_clk_init()   Mike Turquette
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Russell King - ARM Linux
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Russell King - ARM Linux
• [PATCH] ARM: tegra: Add sbs-battery node to Dalmore   Stephen Warren
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Russell King - ARM Linux
• [PATCH V2 0/4] ARM: tegra: dalmore: add regulators   Stephen Warren
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Jason Gunthorpe
• [PATCH v4 0/5] move s3c24xx-irq to drivers/irqchip and add dt support   Heiko Stübner
• [PULL] VGIC fixes for KVM/ARM   Marc Zyngier
• [PATCH v4 1/5] ARM: S3C24XX: move irq driver to drivers/irqchip   Heiko Stübner
• [PATCH v4 2/5] irqchip: s3c24xx: fix comments on some camera interrupts   Heiko Stübner
• [PATCH v4 3/5] irqchip: s3c24xx: fix irqlist of second s3c2416 controller   Heiko Stübner
• [PATCH v4 4/5] irqchip: s3c24xx: add irq_set_type callback for basic interrupt types   Heiko Stübner
• [PATCH v4 5/5] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH 0/3] Fix msm timer clearing bugs   David Brown
• [PATCH RFC] clk: divider: Tolerate 0 divider for one based dividers   Sören Brinkmann
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Mark Rutland
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• Integrator PCI base dilemma   Jason Gunthorpe
• [PATCH] ARM: tegra: fix register address of slink controller   Stephen Warren
• Integrator PCI base dilemma   Russell King - ARM Linux
• [PATCH] mach_omap2: use PTR_RET instead of IS_ERR + PTR_ERR   Jon Hunter
• [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks   Tero Kristo
• [PATCH v9 1/3] ARM: Add base support for ARMv7-M   Jonathan Austin
• [PATCH 0/2] Add dbg_show functions to the Marvell GPIO drivers   Simon Guinot
• [PATCH 1/2] gpio: mvebu: add dbg_show function   Simon Guinot
• [PATCH 2/2] ARM: Orion: add dbg_show function to gpio-orion driver   Simon Guinot
• [PATCH v2 09/13] ARM: spear: make clock driver independent of headers   Mike Turquette
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   Fabio Estevam
• [PATCH v10 0/12] Palmas updates   Stephen Rothwell
• [PATCH v8 00/14] Tegra114 clockframework   Stephen Warren
• [PATCH 1/1] clk: Fix incorrect return type in clk.c   Mike Turquette
• Integrator PCI base dilemma   Linus Walleij
• [PATCH 5/5] arm: dts: Convert mvebu device tree files to 64 bits   Arnd Bergmann
• [PATCH v2 09/13] ARM: spear: make clock driver independent of headers   Arnd Bergmann
• [PATCH 1/2] gpio: mvebu: add dbg_show function   Jason Cooper
• [PATCH v2 09/13] ARM: spear: make clock driver independent of headers   Mike Turquette
• [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks   Mike Turquette
• Integrator PCI base dilemma   Arnd Bergmann
• [PATCH REPOST v2] clk: add table lookup to mux   Mike Turquette
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Arnd Bergmann
• [PATCH] ARM: tegra: fix register address of slink controller   Arnd Bergmann
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Mike Turquette
• [PATCH V2 1/3] clk: Restructure code for __clk_reparent   Mike Turquette
• [PATCH V2 2/3] clk: Improve errorhandling for clk_set_parent   Mike Turquette
• [PATCH REPOST v2] clk: add table lookup to mux   Stephen Warren
• [PATCH for 3.10 v2] mmc: mvsdio: use dev_*() API instead of pr_*() API   Ralph Droms
• [PATCH net-next] dsa: add device tree bindings to register DSA switches   Florian Fainelli
• [PATCH v4 5/5] irqchip: s3c24xx: add devicetree support   Arnd Bergmann
• [PATCH v4 0/5] move s3c24xx-irq to drivers/irqchip and add dt support   Arnd Bergmann
• Integrator PCI base dilemma   Wolfgang Denk
• [PATCH v4 0/5] move s3c24xx-irq to drivers/irqchip and add dt support   Heiko Stübner
• [PATCH] ARM: autcpu12: Fix config check in autcpu12_init_late()   Ben Hutchings
• [PATCH] ARM64: early_printk: Fix check for CONFIG_ARM64_64K_PAGES   Ben Hutchings
• [PATCH v9 1/3] ARM: Add base support for ARMv7-M   Uwe Kleine-König
• [PATCH v4 5/5] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH v2 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver   Wolfram Sang
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH v2 01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'   Ezequiel Garcia
• [PATCH v2 02/14] thermal: mvebu: Rename symbols 'kirkwood' -> 'mvebu'   Ezequiel Garcia
• [PATCH v2 03/14] thermal: mvebu: Move MODULE_DEVICE_TABLE upwards   Ezequiel Garcia
• [PATCH v2 04/14] thermal: mvebu: Remove unneeded variable initialization   Ezequiel Garcia
• [PATCH v2 05/14] thermal: mvebu: Convert to devm_ioremap_resource()   Ezequiel Garcia
• [PATCH v2 06/14] thermal: mvebu: Fix license declaration   Ezequiel Garcia
• [PATCH v2 07/14] thermal: mvebu: Rename kirkwood definitions to mvebu   Ezequiel Garcia
• [PATCH v2 08/14] thermal: mvebu: Add infrastructure to support more multiple SoC variants   Ezequiel Garcia
• [PATCH v2 09/14] thermal: mvebu: Add support for Armada XP thermal sensor   Ezequiel Garcia
• [PATCH v2 10/14] thermal: mvebu: Add support for Armada 370 thermal sensor   Ezequiel Garcia
• [PATCH v2 11/14] thermal: mvebu: Add support for Marvell Dove SoC family   Ezequiel Garcia
• [PATCH v2 12/14] ARM: mvebu: Add thermal support to Armada XP device tree   Ezequiel Garcia
• [PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 device tree   Ezequiel Garcia
• [PATCH v2 14/14] ARM: configs: Update mvebu, dove and kirkwood defconfigs for thermal   Ezequiel Garcia
• [PATCH REPOST v2] clk: add table lookup to mux   Mike Turquette
• Integrator PCI base dilemma   Linus Walleij
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCH v4 5/5] irqchip: s3c24xx: add devicetree support   Arnd Bergmann
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Jon Hunter
• Integrator PCI base dilemma   Russell King - ARM Linux
• Integrator PCI base dilemma   Wolfgang Denk
• [PATCH 1/6] of/pci: Provide support for parsing PCI DT ranges property   Jingoo Han
• [PATCH 2/6] of/pci: Add of_pci_parse_bus_range() function   Jingoo Han
• [PATCH 3/6] pci: infrastructure to add drivers in drivers/pci/host   Jingoo Han
• [PATCH 4/6] pci: Add PCIe driver for Samsung Exynos   Jingoo Han
• [PATCH 5/6] ARM: EXYNOS: Enable PCIe support for Exynos5440   Jingoo Han
• [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC   Jingoo Han
• [PATCHv2 0/7] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv2 1/7] of: Add support for reading a u32 from a multi-value property.   Tony Prisk
• [PATCHv2 2/7] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCHv2 4/7] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• [PATCHv2 5/7] arm: vt8500: Remove gpio devicetree nodes   Tony Prisk
• [PATCHv2 6/7] gpio: vt8500: Remove arch-vt8500 gpio driver   Tony Prisk
• [PATCHv2 7/7] arm: vt8500: Remove pinmux configuration from mach-vt8500/vt8500.c   Tony Prisk
• Re: [PATCH] ARM: autcpu12: Fix config check in autcpu12_init_late()   Alexander Shiyan
• [PATCH] mxs/spi: Add SPI slave mode operation DT prop   Trent Piepho
• [PATCH v2] cpufreq: instantiate cpufreq-cpu0 as a platform_driver   Shawn Guo
• [PATCH 0/5] video: vt8500 patches for 3.10   Tony Prisk
• [PATCH 1/5] video: vt8500: Make wmt_ge_rops optional   Tony Prisk
• [PATCH 2/5] video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h   Tony Prisk
• [PATCH 3/5] video: vt8500: Correct descriptions in video/Kconfig   Tony Prisk
• [PATCH 4/5] drivers/video/wm8505fb.c: use devm_ functions   Tony Prisk
• [PATCH 5/5] video: vt8500: Adjust contrast in wm8505 framebuffer driver.   Tony Prisk
• [PATCH 4/4] dmaengine: dw_dmac: simplify master selection   Viresh Kumar
• [PATCH v2 0/3] clock driver for sunxi   Maxime Ripard
• [GIT PULL] sunxi DT additions for 3.10, take 1   Maxime Ripard
• [GIT PULL] sunxi drivers additions for 3.10, take 1   Maxime Ripard
• [PATCH] ARM: AT91: Fix typo in restart code panic message   Maxime Ripard
• [GIT PULL] sunxi DT additions for 3.10, take 1   Arnd Bergmann
• [GIT PULL] sunxi drivers additions for 3.10, take 1   Arnd Bergmann
• [PATCH v3] clk: add si5351 i2c common clock driver   Lars-Peter Clausen
• [PATCH 1/6] of/pci: Provide support for parsing PCI DT ranges property   Russell King - ARM Linux
• [PATCHv2 2/7] arm: vt8500: Increase available GPIOs on arch-vt8500   Russell King - ARM Linux
• [PATCH v2 11/14] thermal: mvebu: Add support for Marvell Dove SoC family   Sebastian Hesselbarth
• [RFC PATCH v3 0/6] sched: packing small tasks   Preeti U Murthy
• [PATCH v3 00/12] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v4 0/4] Initial Device Tree support for S3C64xx   Tomasz Figa
• [PATCH] ARM: zynq: add smp_twd timer   Steffen Trumtrar
• [PATCH] ARM: zynq: add gem support   Steffen Trumtrar
• [PATCH] ARM: Kirkwood: fix unused mvsdio gpio pins   Sebastian Hesselbarth
• [PATCH 0/3] ARM: zynq: add SMP support for zynq7000   Steffen Trumtrar
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Steffen Trumtrar
• [PATCH 2/3] ARM: zynq: get slcr base earlier   Steffen Trumtrar
• [PATCH 3/3] ARM: zynq: add SMP support   Steffen Trumtrar
• [PATCH] ARM: kirkwood: make use of DT mvsdio on guruplug board   Sebastian Hesselbarth
• [PATCH] ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig   Sebastian Hesselbarth
• [PATCH] ARM: zynq: add support for ZedBoard   Steffen Trumtrar
• [PATCH 1/6] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
• [PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 device tree   Sergei Shtylyov
• [PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 device tree   Sergei Shtylyov
• [PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 device tree   Sergei Shtylyov
• [PATCH v4] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Sebastian Hesselbarth
• [PATCH] ARM: Kirkwood: fix unused mvsdio gpio pins   Thomas Petazzoni
• [PATCH 1/2] gpio: mvebu: add dbg_show function   Thomas Petazzoni
• [PATCH] ARM: Kirkwood: fix unused mvsdio gpio pins   Sebastian Hesselbarth
• [PATCH 1/2] gpio: mvebu: add dbg_show function   Simon Guinot
• [PATCH 1/2] gpio: mvebu: add dbg_show function   Russell King - ARM Linux
• [PATCH 1/2] gpio: mvebu: add dbg_show function   Thomas Petazzoni
• [PATCH] ARM: Kirkwood: fix unused mvsdio gpio pins   Thomas Petazzoni
• [PATCH] ARM: Kirkwood: fix unused mvsdio gpio pins   Sebastian Hesselbarth
• [PATCHv2 2/7] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCH 0/3] arm: orion5x: devicetree fixups and additions   Alexander Clouter
• [PATCH 1/3] arm: orion5x: fix orion5x.dtsi gpio parameters   Alexander Clouter
• [PATCH 2/3] arm: orion5x: add ehci bindings to dtsi   Alexander Clouter
• [PATCH 3/3] arm: orion5x: enable xor for orion5x platform   Alexander Clouter
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• [PATCH 1/1 v2 net-next] net: fec: fix the build as module   Fabio Estevam
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Jason Cooper
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Sebastian Hesselbarth
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Jason Cooper
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Sebastian Hesselbarth
• [PATCH] Fix IXP4xx coherent allocations   Krzysztof Halasa
• [PATCH] [ARM] Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH 0/3] arm: orion5x: devicetree fixups and additions   Arnd Bergmann
• [PATCH] ARM: add unwind annotations to ftrace asm   Rabin Vincent
• [GIT PULL] sunxi drivers additions for 3.10, take 1   Maxime Ripard
• [PATCHv2 0/4] arm: orion5x: devicetree fixups and additions   Alexander Clouter
• [PATCHv2 1/4] arm: orion5x: fix orion5x.dtsi gpio parameters   Alexander Clouter
• [PATCHv2 2/4] arm: orion5x: add ehci bindings to dtsi   Alexander Clouter
• [PATCHv2 3/4] arm: orion5x: enable xor for orion5x platform   Alexander Clouter
• [PATCHv2 4/4] arm: orion5x: correct IRQ used in dtsi for mv_cesa   Alexander Clouter
• [PATCHv2 0/5] ARM: sunxi: Add support for A10 Ethernet controller   Maxime Ripard
• [PATCH 1/5] net: Add EMAC ethernet driver found on Allwinner A10 SoC's   Maxime Ripard
• [PATCH 2/5] ARM: sunxi: Add EMAC controller node to sun4i DTSI   Maxime Ripard
• [PATCH 3/5] ARM: sun4i: Add muxing options for the ethernet controller   Maxime Ripard
• [PATCH 4/5] ARM: cubieboard: Enable ethernet (WEMAC) support in dts   Maxime Ripard
• [PATCH 5/5] ARM: hackberry: dt: Add Ethernet controller to the Hackberry device tree   Maxime Ripard
• [PATCH] Fix IXP4xx coherent allocations   David Miller
• [PATCH v2 11/14] thermal: mvebu: Add support for Marvell Dove SoC family   Ezequiel Garcia
• [PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 device tree   Ezequiel Garcia
• [PATCH RESEND] irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure   Tony Prisk
• [PATCH v10 05/12] watchdog: Kconfig for Palmas watchdog   Guenter Roeck
• [PATCH] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [RFC PATCH v2, part4 10/39] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [RFC PATCH v2, part4 11/39] mm/ARM64: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [RFC PATCH v2, part4 11/39] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [RFC PATCH v2, part4 12/39] mm/ARM64: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [PATCHv2 0/4] arm: orion5x: devicetree fixups and additions   Arnd Bergmann
• [PATCH v2] cpufreq: instantiate cpufreq-cpu0 as a platform_driver   Guennadi Liakhovetski
• [PATCH v2] cpufreq: instantiate cpufreq-cpu0 as a platform_driver   Guennadi Liakhovetski
• [PATCH 1/2] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Viresh Kumar
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY   Shawn Guo
• [PATCH 2/2] ARM: mxs_defconfig: add CONFIG_USB_PHY   Shawn Guo
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH v3 1/1 net-next] net: fec: put tx to napi poll function to fix dead lock   Shawn Guo
• [PATCH 1/2] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Francesco Lavra
• [PATCH v2 0/2] Add dbg_show functions to the Marvell GPIO drivers   Simon Guinot
• [PATCH v2 1/2] gpio: mvebu: add dbg_show function   Simon Guinot
• [PATCH v2 2/2] ARM: Orion: add dbg_show function to gpio-orion driver   Simon Guinot
• [PATCH 1/2] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Viresh Kumar
• [PATCH] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH] ARM: l2x0: don't set .set_debug in l310 case   Paolo Pisati
• [PATCH 1/5] net: Add EMAC ethernet driver found on Allwinner A10 SoC's   Florian Fainelli
• [PATCH] Fix IXP4xx coherent allocations   Ben Hutchings
• [PATCH v4 0/3] CPUFreq for sh73a0 / kzm9g, using cpufreq-cpu0   Guennadi Liakhovetski
• [PATCH v4 1/3] ARM: shmobile: sh73a0: add support for adjusting CPU frequency   Guennadi Liakhovetski
• [PATCH v4 2/3] ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings   Guennadi Liakhovetski
• [PATCH v4 3/3] ARM: shmobile: kzm9g-reference: add CPUFreq support   Guennadi Liakhovetski
• [PATCH 7/7] ARM: l2x0: don't set .set_debug in l310 case   Paolo Pisati
• [PATCH 0/2] Fix for mv643xx_eth built as module   Simon Baatz
• [PATCH 1/2] net: mvmdio: define module alias for platform device   Simon Baatz
• [PATCH 2/2] mv643xx_eth: defer probing if Marvell Orion MDIO driver not loaded   Simon Baatz
• [PATCH 0/2] Fix for mv643xx_eth built as module   Florian Fainelli
• [PATCH 0/2] Fix for mv643xx_eth built as module   David Miller
• [PATCH v10 0/12] Palmas updates   Mark Brown
• [PATCH] ARM: l2x0: don't set .set_debug in l310 case   Rob Herring
• [PATCH] Fix IXP4xx coherent allocations   Krzysztof Halasa
• [PATCH net-next] dsa: add device tree bindings to register DSA switches   David Miller
• [PATCH 1/1 net-next] net: fec: build fec.c and fec_ptp.c to one module   Frank Li
• [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework   Kukjin Kim
• [PATCH v10 12/12] regulator: palmas remove palmas-charger option from DT bindings   Mark Brown
• [PATCH v4 0/4] Initial Device Tree support for S3C64xx   Kukjin Kim
• [PATCH v2] mfd: remove twelve unused Kconfig symbols   Kukjin Kim
• [PATCH] ARM: samsung: remove "config S3C_BOOT_WATCHDOG"   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIG   Kukjin Kim
• [PATCH] S3C24XX: remove unneeded "config SMDK2440_CPU2442"   Kukjin Kim
• [PATCH v9 11/11] regulator: palmas remove palmas-charger option from DT bindings   Mark Brown
• [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig   Chen Gang
• [PATCH 6/9] power: pm2301_charger: remove __devinit annotations   Anton Vorontsov
• [PATCH V3 0/5] Add polling support for 64xx spi controller   Girish KS
• [RFC PATCH 0/6] ARM: use NO_BOOTMEM on default configuration   Joonsoo Kim
• [RFC PATCH 1/6] ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()   Joonsoo Kim
• [RFC PATCH 2/6] ARM, crashkernel: use ___alloc_bootmem_node_nopanic() for reserving memory   Joonsoo Kim
• [RFC PATCH 3/6] ARM, crashkernel: correct total_mem size in reserve_crashkernel()   Joonsoo Kim
• [RFC PATCH 4/6] ARM, mm: don't do arm_bootmem_init() if CONFIG_NO_BOOTMEM   Joonsoo Kim
• [RFC PATCH 5/6] ARM, mm: change meaning of max_low_pfn to maximum pfn for nobootmem   Joonsoo Kim
• [RFC PATCH 6/6] ARM, mm: enable NO_BOOTMEM for default ARM build   Joonsoo Kim
• Submitting fbdev tree patches   Tony Prisk
• [PATCH 1/2] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Viresh Kumar
• [PATCH 1/2] media: davinci: vpss: enable vpss clocks   Sekhar Nori
• [PATCH 2/2] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Sekhar Nori
• [PATCH 2/8] ARM: sirf: fix prima2 interrupt lookup   Barry Song
• [PATCH v7 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCH 0/2] ARM: dts: Add default pin states for client nodes on Exynos4/5 platforms   Tushar Behera
• [PATCH v3 02/11] clk: davinci - add PSC clock driver   Sekhar Nori
• [PATCH 0/2] Update device tree binding document for pwm-tiehrpwm & pwm-tiecap   Philip Avinash
• [PATCH 1/2] pwm: pwm-tiecap: Update device-tree binding document   Philip Avinash
• [PATCH 2/2] pwm: pwm-tiehrpwm: Update device-tree binding document   Philip Avinash
• [PATCH V2 0/6] remove the clock name from pdata   Chao Xie
• [PATCH V2 1/6] usb: gadget: mv_udc_core: remove unused clock   Chao Xie
• [PATCH V2 2/6] usb: otg: mv_otg: remove unused clock   Chao Xie
• [PATCH V2 3/6] usb: ehci: mv_ehci: remove unused clock   Chao Xie
• [PATCH V2 4/6] arm: mmp: remove clock from usb pdata for aspenite   Chao Xie
• [PATCH V2 5/6] arm: mmp: remove clock name from usb pdata for ttc   Chao Xie
• [PATCH V2 6/6] usb: mv_usb: remove clock name from pdata   Chao Xie
• [PATCH 1/2] pwm: pwm-tiecap: Update device-tree binding document   Peter Korsgaard
• [PATCH 2/2] pwm: pwm-tiehrpwm: Update device-tree binding document   Peter Korsgaard
• [PATCH v10 0/12] Palmas updates   Laxman Dewangan
• [PATCH 00/04] ARM: shmobile: r8a7790 SoC and Lager board support   Simon Horman
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Philip Avinash
• [PATCH v3 2/3] arm: davinci: clock node support for ECAP & EHRPWM   Philip Avinash
• [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node   Philip Avinash
• FW: [PATCH v2 3/4] mmc: sdhci-pxa: Add SDHCI driver for PXA16x   Kevin Liu
• [PATCH] arm: vt8500: Add wm8850 config options to multi_v7_defconfig   Tony Prisk
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Sekhar Nori
• [PATCH for 3.9 0/2] thermal: Marvell SoC thermal formula fixes   Zhang Rui
• [kvmarm] [PATCH 09/29] arm64: KVM: system register handling   Marc Zyngier
• [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.   Philip, Avinash
• [PATCHv2 1/4] arm: orion5x: fix orion5x.dtsi gpio parameters   Andrew Lunn
• [PATCH 1/5] ARM: ux500: Add machine support for ccu8540   Lee Jones
• [PATCHv2 4/4] arm: orion5x: correct IRQ used in dtsi for mv_cesa   Andrew Lunn
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH for 3.9 0/2] thermal: Marvell SoC thermal formula fixes   Andrew Lunn
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Santosh Shilimkar
• [PATCH 1/8] pinctrl: sirf: convert to linear irq domain   Barry Song
• [PATCH 3/8] ARM: sirf: move irq driver to drivers/irqchip   Barry Song
• [PATCH v2 0/4] clk: samsung: pm fixes and multiple aliases   Kukjin Kim
• [PATCH 6/8] ARM: sirf: use clocksource_of infrastructure   Barry Song
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Andrew Lunn
• [PATCH] ARM: dove: add more hardware description in the DT   Jean-Francois Moine
• [PATCH 1/8] pinctrl: sirf: convert to linear irq domain   Arnd Bergmann
• [PATCH v2 11/14] thermal: mvebu: Add support for Marvell Dove SoC family   Ezequiel Garcia
• [PATCH v3 1/3] ARM: davinci: clk framework support for enable/disable functionality   Philip Avinash
• [PATCH 3/8] ARM: sirf: move irq driver to drivers/irqchip   Arnd Bergmann
• [PATCH 1/6] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Maxime Ripard
• [PATCH 5/8] ARM: sirf: move debug-macro.S to include/debug/sirf.S   Barry Song
• [RFC PATCH 5/6] ARM, mm: change meaning of max_low_pfn to maximum pfn for nobootmem   Russell King - ARM Linux
• [PATCH v3] ARM: DTS: CROS5250: Add max77686 device tree support   Kukjin Kim
• [PATCH 3/8] ARM: sirf: move irq driver to drivers/irqchip   Barry Song
• [RFC PATCH v3 0/6] sched: packing small tasks   Vincent Guittot
• [PATCH 0/2] Add support for the Solomon SSD1306 OLED Controller   Maxime Ripard
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Santosh Shilimkar
• [PATCH v2 01/18] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use   Santosh Shilimkar
• [PATCH v2 02/18] ARM: OMAP5: PM: Update CPU context register offset   Santosh Shilimkar
• [PATCH v2 03/18] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5   Santosh Shilimkar
• [PATCH v2 04/18] ARM: OMAP5: PM: Set MPUSS-EMIF clock-domain static dependency   Santosh Shilimkar
• [PATCH v2 05/18] ARM: OMAP5: PM: Enables ES2 PM mode by default   Santosh Shilimkar
• [PATCH v2 06/18] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains   Santosh Shilimkar
• [PATCH v2 07/18] ARM: OMAP5: Add init_late() hook to enable pm initialization   Santosh Shilimkar
• [PATCH v2 08/18] ARM: OMAP5: PM: Add CPU power off in hotplug path   Santosh Shilimkar
• [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method   Santosh Shilimkar
• [PATCH v2 10/18] ARM: OMAP5: PM: Add MPU Open Switch Retention support   Santosh Shilimkar
• [PATCH v2 11/18] ARM: OMAP5: PM: Add L2 memory power down support   Santosh Shilimkar
• [PATCH v2 12/18] ARM: OMAP4: CPUidle: Avoid double idle driver registration   Santosh Shilimkar
• [PATCH v2 13/18] ARM: OMAP: CPUidle: Unregister drivere on device registration failure   Santosh Shilimkar
• [PATCH v2 14/18] ARM: OMAP4: CPUidle: Make C-state description field more precise   Santosh Shilimkar
• [PATCH v2 15/18] ARM: OMAP4+: CPUidle: Consolidate idle driver for OMAP5 support   Santosh Shilimkar
• [PATCH v2 16/18] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()   Santosh Shilimkar
• [PATCH v2 17/18] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support   Santosh Shilimkar
• [PATCH v2 18/18] ARM: OMAP5: PM: handle device instance for warm reset   Santosh Shilimkar
• [PATCH 1/8] pinctrl: sirf: convert to linear irq domain   Barry Song
• [PATCH 1/2] media: davinci: vpss: enable vpss clocks   Prabhakar Lad
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Peter De Schrijver
• [PATCH 2/2] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Prabhakar Lad
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Sascha Hauer
• [PATCH 1/6] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Emilio López
• [PATCH 1/6] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCH] ARM: dove: add more hardware description in the DT   Sebastian Hesselbarth
• [PATCH v7 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar Lad
• [PATCH 7/8] ARM: sirf: enable multiplatform support   Barry Song
• [PATCH 1/2] media: davinci: vpss: enable vpss clocks   Sekhar Nori
• [PATCH 8/8] ARM: sirf: enable support in multi_v7_defconfig   Barry Song
• [PATCH v7 1/2] ARM: davinci: dm365: add support for v4l2 video display   Sekhar Nori
• [PATCH] ARM: l2x0: don't set .set_debug in l310 case   Paolo Pisati
• [PATCH 1/2] media: davinci: vpss: enable vpss clocks   Prabhakar Lad
• [PATCH 4/8] ARM: sirf: enable sparse IRQ   Barry Song
• [PATCH 0/2] ARM: dts: Add default pin states for client nodes on Exynos4/5 platforms   Kukjin Kim
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Sascha Hauer
• [PATCH 0/2] ARM: dts: Add default pin states for client nodes on Exynos4/5 platforms   Kukjin Kim
• [PATCH v7 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar Lad
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Will Deacon
• [PATCH 4/8] ARM: sirf: enable sparse IRQ   Arnd Bergmann
• [PATCH 7/8] ARM: sirf: enable multiplatform support   Arnd Bergmann
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Santosh Shilimkar
• [PATCH] ARM: imx1: mm: add call to mxc_device_init   gwenhael.goavec
• EXYNOS will support only DT from v3.10   Kukjin Kim
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Russell King - ARM Linux
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Martin Fuzzey
• [PATCH 3/8] ARM: sirf: move irq driver to drivers/irqchip   Arnd Bergmann
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Prashant Gaikwad
• [PATCH v8 10/14] ARM: tegra: Define Tegra114 CAR binding   Prashant Gaikwad
• [PATCH 2/2] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver   Sekhar Nori
• [PATCH 1/6] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Maxime Ripard
• [PATCH V3] clk: Add composite clock type   Prashant Gaikwad
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Prabhakar lad
• [PATCH 0/8] SIRF multiplatform support   Arnd Bergmann
• EXYNOS will support only DT from v3.10   Arnd Bergmann
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Vaibhav Hiremath
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Lokesh Vutla
• [PATCH v3] clk: add si5351 i2c common clock driver   Sebastian Hesselbarth
• EXYNOS will support only DT from v3.10   Mark Brown
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Santosh Shilimkar
• [PATCH 1/17] ARM: mach-imx: cpu: Include "common.h"   Fabio Estevam
• [PATCH 2/17] ARM: mach-imx: mm-imx3: Staticize imx3_init_l2x0()   Fabio Estevam
• [PATCH 3/17] ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map   Fabio Estevam
• [PATCH 4/17] ARM: mach-imx: cpu-imx5: Include "common.h"   Fabio Estevam
• [PATCH 5/17] ARM: mach-imx: cpu_op-mx51: Include "cpu_op-mx51.h"   Fabio Estevam
• [PATCH 6/17] ARM: mach-imx: clk-pllv1: Staticize clk_pllv1_ops   Fabio Estevam
• [PATCH 7/17] ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops   Fabio Estevam
• [PATCH 8/17] ARM: mach-imx: clk-gate2: Include "clk.h"   Fabio Estevam
• [PATCH 9/17] ARM: mach-imx: irq-common: Remove imx_irq_set_priority()   Fabio Estevam
• [PATCH 10/17] ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops   Fabio Estevam
• [PATCH 11/17] ARM: mach-imx: clk: Include "clk.h"   Fabio Estevam
• [PATCH 12/17] ARM: mach-imx: tzic: Staticize *tzic_base   Fabio Estevam
• [PATCH 13/17] ARM: mach-imx: avic: Staticize *avic_base   Fabio Estevam
• [PATCH 14/17] ARM: mach-imx: anatop: Include "common.h"   Fabio Estevam
• [PATCH 15/17] ARM: mach-imx: gpc: Include "common.h"   Fabio Estevam
• [PATCH 16/17] ARM: mach-imx: src: Include "common.h   Fabio Estevam
• [PATCH 17/17] ARM: mach-imx: mach-imx6q: Fix sparse warnings   Fabio Estevam
• EXYNOS will support only DT from v3.10   Heiko Stübner
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Sebastian Hesselbarth
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Sourav Poddar
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Douglas Gilbert
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Rajendra Nayak
• EXYNOS will support only DT from v3.10   Arnd Bergmann
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Ezequiel Garcia
• [PATCH] ARM: dove: add more hardware description in the DT   Jean-Francois Moine
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Rajendra Nayak
• [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support   Sourav Poddar
• [PATCH] ARM: dove: add more hardware description in the DT   Sebastian Hesselbarth
• EXYNOS will support only DT from v3.10   Mark Brown
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Fabio Estevam
• [PATCH 5/9] staging: ste_rmi4: kill platform_data hack   Linus Walleij
• EXYNOS will support only DT from v3.10   Arnd Bergmann
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Sascha Hauer
• [PATCH 00/10] ARM: sunxi: Architecture cleanups and rework   Maxime Ripard
• [PATCH 01/10] ARM: sunxi: dt: Reorganize the dtsi   Maxime Ripard
• [PATCH 02/10] clocksource: sunxi: Cleanup the timer code   Maxime Ripard
• [PATCH 03/10] clocksource: sunxi: make use of CLKSRC_OF   Maxime Ripard
• [PATCH 04/10] clocksource: sunxi: Rename sunxi to sun4i   Maxime Ripard
• [PATCH 05/10] ARM: sunxi: dt: Update timer compatible string   Maxime Ripard
• [PATCH 06/10] irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro   Maxime Ripard
• [PATCH 07/10] irqchip: sunxi: Rename sunxi to sun4i   Maxime Ripard
• [PATCH 08/10] ARM: sunxi: dt: Update interrupt controller compatible string   Maxime Ripard
• [PATCH 09/10] ARM: sunxi: Rework the restart code   Maxime Ripard
• [PATCH 10/10] ARM: sunxi: dt: Update watchdog compatible string   Maxime Ripard
• [GIT PULL] arm-soc: bug fixes for 3.9-rc4   Arnd Bergmann
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Linus Walleij
• [PATCH 12/17] ARM: mach-imx: tzic: Staticize *tzic_base   Sascha Hauer
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Douglas Gilbert
• [PATCH 03/10] clocksource: sunxi: make use of CLKSRC_OF   Rob Herring
• [PATCH] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH v2 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH v2 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Bastian Hecht
• [PATCH 01/10] arm: zynq: Use standard timer binding   Michal Simek
• [PATCH 02/10] arm: zynq: Move timer to clocksource interface   Michal Simek
• [PATCH 03/10] arm: zynq: Move timer to generic location   Michal Simek
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH 05/10] arm: zynq: Move slcr initialization to separate file   Michal Simek
• [PATCH 06/10] arm: zynq: Add support for system reset   Michal Simek
• [PATCH 07/10] arm: zynq: Add support for pmu   Michal Simek
• [PATCH 08/10] arm: zynq: Add smp support   Michal Simek
• [PATCH 09/10] arm: zynq: Add hotplug support   Michal Simek
• [PATCH 10/10] arm: zynq: Add cpuidle support   Michal Simek
• [PATCH] ARM: zynq: add smp_twd timer   Michal Simek
• [PATCH] ARM: zynq: add gem support   Michal Simek
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Sebastian Hesselbarth
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Daniel Lezcano
• [PATCH 08/10] ARM: sunxi: dt: Update interrupt controller compatible string   Rob Herring
• [PATCH 07/10] irqchip: sunxi: Rename sunxi to sun4i   Rob Herring
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Michal Simek
• [PATCH v2 12/17] ARM: mach-imx: tzic: Staticize *tzic_base   Fabio Estevam
• [PATCH 2/3] ARM: zynq: get slcr base earlier   Michal Simek
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Rob Herring
• [PATCH] ARM: imx1: mm: add call to mxc_device_init   Sascha Hauer
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Linus Walleij
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Arnd Bergmann
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [PATCH 08/10] arm: zynq: Add smp support   Rob Herring
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Randy Dunlap
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Steffen Trumtrar
• [PATCH 3/3] ARM: zynq: add SMP support   Michal Simek
• [PATCH] ARM: zynq: add support for ZedBoard   Michal Simek
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] clk: fix clk_mux::flags kerneldoc   James Hogan
• [PATCH] ARM: AT91: Fix typo in restart code panic message   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Linus Walleij
• [PATCH 0/4] ARM: at91: little DT fixes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: zynq: get slcr base earlier   Steffen Trumtrar
• RFC v2: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH 2/3] ARM: zynq: get slcr base earlier   Michal Simek
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Michal Simek
• [PATCH 0/2] mmc: mxs-mmc: add cd-inverted and non-removeable   Marc Kleine-Budde
• [PATCH 1/2] mmc: mxs-mmc: add cd-inverted property   Marc Kleine-Budde
• [PATCH 2/2] mmc: mxs-mmc: add non-removeable property   Marc Kleine-Budde
• [PATCH 1/3] ARM: ux500: Add device nodes for TCDM and TCPM memory locations   Lee Jones
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Lee Jones
• [PATCH 3/3] mfd: db8500-prcmu: Fetch the PRCMU TCPM base address from Device Tree   Lee Jones
• [PATCH] ARM: l2x0: don't set .set_debug in l310 case   Rob Herring
• [PATCH] ARM: mxs: remove unneeded mach-types.h inclusion   Shawn Guo
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Arnd Bergmann
• [PATCH 0/6] ARM: mxs: timer code cleanup   Shawn Guo
• [PATCH 1/6] ARM: mxs: use CLKSRC_OF helper to initialize timer   Shawn Guo
• [PATCH 2/6] ARM: mxs: look up timrot clock from device tree   Shawn Guo
• [PATCH 3/6] ARM: mxs: get timrot base address from device tree   Shawn Guo
• [PATCH 4/6] ARM: mxs: remove cpu_is_mx23() call from timer code   Shawn Guo
• [PATCH 5/6] ARM: mxs: select STMP_DEVICE and use it for timer code   Shawn Guo
• [PATCH 6/6] ARM: mxs: move timer driver into drivers/clocksource   Shawn Guo
• [PATCH] ARM: zynq: add gem support   Steffen Trumtrar
• [PATCH 0/3] ARM: mxs: icoll code cleanup   Shawn Guo
• [PATCH 1/3] ARM: mxs: get icoll base address from device tree   Shawn Guo
• [PATCH 2/3] ARM: mxs: call stmp_reset_block() in icoll   Shawn Guo
• [PATCH 3/3] ARM: mxs: move icoll driver into drivers/irqchip   Shawn Guo
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Douglas Gilbert
• [PATCH for 3.10 0/4] thermal: Add Armada 370/XP support   Ezequiel Garcia
• [PATCH 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [PATCH 2/4] ARM: mvebu: Add thermal support to Armada XP device tree   Ezequiel Garcia
• [PATCH 3/4] ARM: mvebu: Add thermal support to Armada 370 device tree   Ezequiel Garcia
• [PATCH 4/4] ARM: configs: Update mvebu defconfig for thermal   Ezequiel Garcia
• [PATCH 3/3] mfd: db8500-prcmu: Fetch the PRCMU TCPM base address from Device Tree   Lee Jones
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Lee Jones
• [PATCH v2] mmc: mxcmmc: DT support   Markus Pargmann
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Rob Herring
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Arnd Bergmann
• [PATCH 5/6] ARM: ux500: move PRCMU functions into the CPUidle driver   Linus Walleij
• [PATCH v2] ARM: cache-l2x0: fix masking of RTL revision numbering and set_debug init   Rob Herring
• [PATCH 03/10] arm: zynq: Move timer to generic location   Steffen Trumtrar
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Stephen Warren
• [PATCH 1/1 net-next] net: fec: build fec.c and fec_ptp.c to one module   David Miller
• [PATCH 05/10] arm: zynq: Move slcr initialization to separate file   Steffen Trumtrar
• [PATCH 03/10] clocksource: sunxi: make use of CLKSRC_OF   Maxime Ripard
• [PATCH 03/10] arm: zynq: Move timer to generic location   Michal Simek
• [PATCH 08/10] ARM: sunxi: dt: Update interrupt controller compatible string   Maxime Ripard
• [PATCH v2 00/14] Marvell EBU thermal sensor consolidation   Jason Gunthorpe
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH 08/10] arm: zynq: Add smp support   Michal Simek
• [PATCH 3/3] ARM: zynq: add SMP support   Steffen Trumtrar
• [PATCH 05/10] arm: zynq: Move slcr initialization to separate file   Michal Simek
• [GIT PULL] Multi Cluster Power Management infrastructure   Nicolas Pitre
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Lee Jones
• [PATCH 3/3] ARM: zynq: add SMP support   Michal Simek
• [PATCH 1/2] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Stephen Warren
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCH 1/2] cpufreq: Notify all policy->cpus in cpufreq_notify_transition()   Viresh Kumar
• [PATCH] mmc: dwmmc: let device core setup the default pin configuration   Doug Anderson
• [PATCH] ARM: at91: add Acme Systems Aria G25 board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC   Jason Gunthorpe
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH v5 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Philipp Zabel
• [PATCH v5 1/8] dt: describe base reset signal binding   Philipp Zabel
• [PATCH v5 2/8] reset: Add reset controller API   Philipp Zabel
• [PATCH v5 3/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)   Philipp Zabel
• [PATCH v5 4/8] ARM i.MX6q: Link system reset controller (SRC) to IPU in DT   Philipp Zabel
• [PATCH v5 5/8] staging: drm/imx: Use SRC to reset IPU   Philipp Zabel
• [PATCH v5 6/8] ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53   Philipp Zabel
• [PATCH v5 7/8] ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree   Philipp Zabel
• [PATCH v5 8/8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• RFC v2: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH] [ARM] Feroceon: fix kexec by setting outer_cache.inv_all   Jason Gunthorpe
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Russell King - ARM Linux
• [PATCH 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   R, Durgadoss
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Greg KH
• [PATCH] clk: tegra: Don't enable PLLs during early boot   Stephen Warren
• [PATCH v2 0/11] Qualcomm SSBI bus driver   Greg Kroah-Hartman
• [PATCH] [ARM] Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH 00/15] ARM: cpuidle: code consolidation   Daniel Lezcano
• [PATCH 01/15] timer: move enum definition out of ifdef section   Daniel Lezcano
• [PATCH 02/15] cpuidle: initialize the broadcast timer framework   Daniel Lezcano
• [PATCH 03/15] cpuidle: ux500: remove timer broadcast initialization   Daniel Lezcano
• [PATCH 04/15] cpuidle: OMAP4: remove timer broadcast initialization   Daniel Lezcano
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Daniel Lezcano
• [PATCH 06/15] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Daniel Lezcano
• [PATCH 08/15] ARM: ux500: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 09/15] ARM: at91: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 10/15] ARM: OMAP3: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 11/15] ARM: s3c64xx: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 12/15] ARM: tegra1: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH 13/15] ARM: shmobile: pm: fix init sections   Daniel Lezcano
• [PATCH 14/15] ARM: shmobile: cpuidle: remove useless WFI function   Daniel Lezcano
• [PATCH 15/15] ARM: shmobile: cpuidle: use init/exit common routine   Daniel Lezcano
• [PATCH v10 01/12] mfd: DT bindings for the palmas family MFD   Stephen Warren
• [PATCH] ARM64: early_printk: Fix check for CONFIG_ARM64_64K_PAGES   Catalin Marinas
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Mark Rutland
• [PATCH 5/9] staging: ste_rmi4: kill platform_data hack   Greg KH
• RFC v2: Zynq Clock Controller   Lars-Peter Clausen
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Andrew Lunn
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• RFC v2: Zynq Clock Controller   Stephen Warren
• [PATCH] [ARM] Feroceon: fix kexec by setting outer_cache.inv_all   Jason Gunthorpe
• [PATCH v2 0/5] Fix 740t support and remove more unused ARMv3 code   Will Deacon
• [PATCH v2 1/5] ARM: tlbflush: remove ARMv3 support   Will Deacon
• [PATCH v2 2/5] ARM: cache: remove ARMv3 support code   Will Deacon
• [PATCH v2 3/5] ARM: mm: fix numerous hideous errors in proc-arm740.S   Will Deacon
• [PATCH v2 4/5] ARM: mm: remove broken condition check for v4 flushing   Will Deacon
• [PATCH v2 5/5] ARM: modules: don't export cpu_set_pte_ext when !MMU   Will Deacon
• [PATCH 0/3] Optimise cache-flushing system call and add iovec variant   Will Deacon
• [PATCH 1/3] ARM: cacheflush: don't round address range up to nearest page   Will Deacon
• [PATCH 2/3] ARM: cacheflush: don't bother rounding to nearest vma   Will Deacon
• [PATCH 3/3] ARM: cacheflush: add new iovec-based cache flushing system call   Will Deacon
• [PATCH] ARM: delay: use private ticks_per_jiffy field for timer-based delay ops   Will Deacon
• [PATCH 1/2] ARM: tegra: use setup_mm_for_reboot rather than explicit pgd switch   Will Deacon
• [PATCH 2/2] ARM: tegra: use CS_LAR_KEY definition instead of 0xC5ACCE55   Will Deacon
• [PATCH 0/4] TLB and mm-related optimisations   Will Deacon
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Will Deacon
• [PATCH 2/4] ARM: tlb: don't perform inner-shareable invalidation for local BP ops   Will Deacon
• [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
• [PATCH 4/4] ARM: atomics: don't use exclusives for atomic64 read/set with LPAE   Will Deacon
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Catalin Marinas
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCH] ARM: dove: add more hardware description in the DT   Jean-Francois Moine
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Daniel Lezcano
• [PATCH 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Andrew Lunn
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Daniel Lezcano
• [PATCH] [ARM] Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH 0/3] Optimise cache-flushing system call and add iovec variant   Jonathan Austin
• [PATCH v9 2/3] ARM: ARMv7-M: Add support for exception handling   Jonathan Austin
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH 3/6] ARM: remove fa526 CPU support   Imre Kaloz
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Andrew Lunn
• [PATCH 3/6] ARM: remove fa526 CPU support   Arnd Bergmann
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Daniel Lezcano
• [PATCH v2] ARM: dove: add more hardware description in the DT   Jean-Francois Moine
• OK to use commit 71856843 as base for further omap clean up?   Jon Hunter
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Amit Kucheria
• [PATCH v2 1/1] ARM Feroceon: fix kexec by setting outer_cache.inv_all   Elijah Ragozin
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Daniel Lezcano
• [PATCH v10 01/12] mfd: DT bindings for the palmas family MFD   Mark Brown
• [PATCH] ARM: dove: add more hardware description in the DT   Sebastian Hesselbarth
• [PATCH 3/6] ARM: remove fa526 CPU support   Tomasz Figa
• [PATCH V2] Sound: sgtl5000 Allow codec clock frequency to be set.   Matt Sealey
• [PATCH 00/15] ARM: cpuidle: code consolidation   Rob Herring
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Nicolas Pitre
• [PATCH v2] ARM: dove: add more hardware description in the DT   Sebastian Hesselbarth
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Thomas Gleixner
• [RFC PATCH 1/6] ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()   Linus Walleij
• [PATCH v5 0/7] move s3c24xx-irq to drivers/irqchip and add dt support   Heiko Stübner
• [PATCH v5 1/7] ARM: S3C24XX: move irq driver to drivers/irqchip   Heiko Stübner
• [PATCH v5 2/7] irqchip: s3c24xx: fix comments on some camera interrupts   Heiko Stübner
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Rob Herring
• [PATCH v5 3/7] irqchip: s3c24xx: fix irqlist of second s3c2416 controller   Heiko Stübner
• [PATCH v5 4/7] irqchip: s3c24xx: add irq_set_type callback for basic interrupt types   Heiko Stübner
• [PATCH v5 5/7] irqchip: s3c24xx: globally keep track of the created intc instances   Heiko Stübner
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Linus Walleij
• [PATCH v5 6/7] irqchip: s3c24xx: make interrupt handling independent of irq_domain structure   Heiko Stübner
• [PATCH v5 7/7] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Andrew Lunn
• [GIT PULL] msm fix for 3.9 -- timer   David Brown
• [PATCH] ARM: delay: use private ticks_per_jiffy field for timer-based delay ops   Nicolas Pitre
• [GIT PULL] msm fix for 3.9 -- timer   Arnd Bergmann
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Daniel Lezcano
• [PATCH 00/15] ARM: cpuidle: code consolidation   Daniel Lezcano
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Nicolas Pitre
• [PATCH v5 7/7] irqchip: s3c24xx: add devicetree support   Arnd Bergmann
• [PATCH 07/15] ARM: cpuidle: add init/exit routine   Daniel Lezcano
• [PATCH 08/10] arm: zynq: Add smp support   Rob Herring
• [PATCH v2 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Magnus Damm
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Rob Herring
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Arnd Bergmann
• [PATCH v8 00/14] Tegra114 clockframework   Stephen Warren
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   John Stultz
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Catalin Marinas
• RFC v2: Zynq Clock Controller   Stephen Warren
• [PATCH] omap: fix typo "CONFIG_BRIDGE_DVFS"   Paul Bolle
• RFC v2: Zynq Clock Controller   Stephen Warren
• [PATCH V3] clk: Add composite clock type   Mike Turquette
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCH 1/4] ARM: context tracking: add exception support   Kevin Hilman
• [PATCH v2 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Kuninori Morimoto
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCH V5 0/9] Add mandatory regulator for all users of pwm-backlight.   Andrew Chew
• [PATCH V5 1/9] ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 2/9] ARM: S3C24XX: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 3/9] ARM: pxa: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 4/9] ARM: EXYNOS: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 5/9] unicore32: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 6/9] ARM: mxs: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 7/9] ARM: vt8500: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 8/9] ARM: tegra: Provide regulator to pwm-backlight   Andrew Chew
• [PATCH V5 9/9] pwm_bl: Add mandatory backlight power regulator   Andrew Chew
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a73a4 SoC support V3   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a73a4 SCIF support V3   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a73a4 IRQC support V2   Magnus Damm
• [PATCH 04/04] ARM: shmobile: r8a73a4 PFC support   Magnus Damm
• [PATCH v2 2/5] ARM: cache: remove ARMv3 support code   Greg Ungerer
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCH 1/1] enet: fec: fix fail resume from suspend state   Frank Li
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Rob Herring
• [PATCH v2 2/5] ARM: cache: remove ARMv3 support code   Hyok S. Choi
• [PATCH v10 09/12] leds: Add support for Palmas LEDs   Kim, Milo
• [PATCH 1/1] enet: fec: fix fail resume from suspend state   Shawn Guo
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Magnus Damm
• [PATCH] clk: exynos5250: Added MUX, DIV and GATE clocks for Gscaler and MFC   Prasanna Kumar
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Santosh Shilimkar
• [PATCH 01/15] timer: move enum definition out of ifdef section   Santosh Shilimkar
• [PATCH 02/15] cpuidle: initialize the broadcast timer framework   Santosh Shilimkar
• [PATCH 04/15] cpuidle: OMAP4: remove timer broadcast initialization   Santosh Shilimkar
• [PATCH] arm:exynos5250: Restore CLK_SRC_TOP3 register via CCF   Prasanna Kumar
• [PATCH] ARM : dts : Added clock definition for MFC as per Common clock framework   Prasanna Kumar
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Hiremath, Vaibhav
• [PATCH] [media] s5p-mfc: Change MFC clock reference w.r.t Common Clock Framework   Prasanna Kumar
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Rajendra Nayak
• [PATCH 1/17] ARM: mach-imx: cpu: Include "common.h"   Shawn Guo
• [PATCH 0/2] mmc: mxs-mmc: add cd-inverted and non-removeable   Shawn Guo
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Hiremath, Vaibhav
• [PATCH V5 6/9] ARM: mxs: Provide regulator to pwm-backlight   Shawn Guo
• [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support   Kuninori Morimoto
• [PATCH 0/8] SIRF multiplatform support   Barry Song
• [PATCH] ARM: shmobile: r8a73a4: add thermal driver support   Kuninori Morimoto
• Submitting fbdev tree patches   Tony Prisk
• [Suggestion] kernel: 'now' may be used uninitialized in posix_cpu_timer_schedule function   Chen Gang
• [PATCH] ARM:s3c24xx: beautify code, data->hwirq is unsigned long which is always >= 0   Chen Gang
• [PATCH v3] ARM: dove: add more hardware description in the DT   Jean-Francois Moine
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Shawn Guo
• [PATCH V5 8/9] ARM: tegra: Provide regulator to pwm-backlight   Thierry Reding
• [PATCH V5 9/9] pwm_bl: Add mandatory backlight power regulator   Thierry Reding
• [PATCH v5 7/7] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH 08/10] arm: zynq: Add smp support   Michal Simek
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Lee Jones
• [PATCH] ARM: kirkwood: make use of DT mvsdio on guruplug board   Andrew Lunn
• [PATCH] ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig   Andrew Lunn
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Andrew Lunn
• [PATCH 09/15] ARM: at91: cpuidle: use init/exit common routine   Nicolas Ferre
• [PATCH 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [PATCH 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   R, Durgadoss
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Linus Walleij
• [PATCHv2 00/10] ARM: sunxi: Architecture cleanups and rework   Maxime Ripard
• [PATCH 01/10] ARM: sunxi: dt: Reorganize the dtsi   Maxime Ripard
• [PATCH 02/10] clocksource: sunxi: Cleanup the timer code   Maxime Ripard
• [PATCH 03/10] clocksource: sunxi: make use of CLKSRC_OF   Maxime Ripard
• [PATCH 04/10] clocksource: sunxi: Rename sunxi to sun4i   Maxime Ripard
• [PATCH 05/10] ARM: sunxi: dt: Update timer compatible string   Maxime Ripard
• [PATCH 06/10] irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro   Maxime Ripard
• [PATCH 07/10] irqchip: sunxi: Rename sunxi to sun4i   Maxime Ripard
• [PATCH 08/10] ARM: sunxi: dt: Update interrupt controller compatible string   Maxime Ripard
• [PATCH 09/10] ARM: sunxi: Rework the restart code   Maxime Ripard
• [PATCH 10/10] ARM: sunxi: dt: Update watchdog compatible string   Maxime Ripard
• [PATCH v2 0/3] clock driver for sunxi   Maxime Ripard
• [PATCH] spi: spi-s3c64xx.c Remove unused argument.   Matthias Brugger
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Daniel Lezcano
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Lee Jones
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH V2] Sound: sgtl5000 Allow codec clock frequency to be set.   Martin Fuzzey
• [PATCH 01/15] timer: move enum definition out of ifdef section   Daniel Lezcano
• [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init   Arnd Bergmann
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Arnd Bergmann
• [PATCH] ARM: AT91: Fix typo in restart code panic message   Nicolas Ferre
• [PATCH v9 2/3] ARM: ARMv7-M: Add support for exception handling   Uwe Kleine-König
• [PATCH for 3.10 v2 0/4] thermal: Add Armada 370/XP support   Ezequiel Garcia
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [PATCH v2 2/4] ARM: mvebu: Add thermal support to Armada XP device tree   Ezequiel Garcia
• [PATCH v2 3/4] ARM: mvebu: Add thermal support to Armada 370 device tree   Ezequiel Garcia
• [PATCH v2 4/4] ARM: configs: Update mvebu defconfig for thermal   Ezequiel Garcia
• [GIT PULL] at91: fixes for 3.9-rc #2   Nicolas Ferre
• [PATCH 2/3] mfd: db8500-prcmu: Fetch the PRCMU TCDM base address from Device Tree   Lee Jones
• [GIT PULL] at91: fixes for 3.9-rc #2   Arnd Bergmann
• [PATCH v2] ARM: OMAP4: clock: Add device tree support for AUXCLKs   Roger Quadros
• [PATCH v3 0/6] introduce support for Atmel Cortex-A5 devices   Nicolas Ferre
• [PATCH V2] Sound: sgtl5000 Allow codec clock frequency to be set.   Martin Fuzzey
• [PATCH] serial: 8250_dw: add support for clk api   Maxime Ripard
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [GIT PULL] at91: fixes for 3.9-rc #2   Nicolas Ferre
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Daniel Lezcano
• [PATCH v2 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Bastian Hecht
• [GIT PULL] at91: fixes for 3.9-rc #2   Arnd Bergmann
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Steffen Trumtrar
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Martin Fuzzey
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Andrew Lunn
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH v3 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Bastian Hecht
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Mark Rutland
• [PATCH] arm:exynos5250: Restore CLK_SRC_TOP3 register via CCF   Tomasz Figa
• [PATCH v2] ARM: at91: add Acme Systems Aria G25 board   Nicolas Ferre
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Daniel Lezcano
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Arnd Bergmann
• [PATCH v9 2/3] ARM: ARMv7-M: Add support for exception handling   Jonathan Austin
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Felipe Balbi
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [PATCH 1/5] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH] ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill   Shawn Guo
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Rob Herring
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [PATCH 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Michal Simek
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Shawn Guo
• mvebu: Device bus driver resurrection   Ezequiel Garcia
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Steffen Trumtrar
• [RFC PATCH v3 4/6] sched: secure access to other CPU statistics   Peter Zijlstra
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Peter Zijlstra
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Michal Simek
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Daniel Lezcano
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [PATCH 1/3] ARM: zynq: read scu base from SoC   Steffen Trumtrar
• mvebu: Device bus driver resurrection   Thomas Petazzoni
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Rafael J. Wysocki
• [RFC PATCH v3 4/6] sched: secure access to other CPU statistics   Vincent Guittot
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Rob Herring
• [PATCH] ARM: mvebu: Add gpio button to Mirabox board   Ezequiel Garcia
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Prabhakar Lad
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH] ARM: mach-imx: clk-busy: Adapt to new the clk_mux structure   Fabio Estevam
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [PATCH 0/2] clk: mxs: mach header cleanup   Shawn Guo
• [PATCH 1/2] clk: mxs: get base address from device tree   Shawn Guo
• [PATCH 2/2] clk: mxs: remove the use of mach level IO accessor   Shawn Guo
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Vincent Guittot
• [PATCH] spi: spi-s3c64xx.c Remove unused argument.   Mark Brown
• [PATCH 00/03 v3] ARM: shmobile: r8a73a4 APE6EVM board support   Magnus Damm
• [PATCH 01/03 v2] ARM: shmobile: APE6EVM base support   Magnus Damm
• [PATCH 02/03 v2] ARM: shmobile: APE6EVM PFC support   Magnus Damm
• [PATCH 03/03 v2] ARM: shmobile: APE6EVM LAN9220 support   Magnus Damm
• [PATCH 0/11] LVDS Display Bridge support for i.MX   Philipp Zabel
• [PATCH 01/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH 02/11] ARM i.MX5: Move IPU clock lookups into device tree   Philipp Zabel
• [PATCH 03/11] ARM i.MX6q: export imx6q_revision   Philipp Zabel
• [PATCH 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Philipp Zabel
• [PATCH 05/11] ARM i.MX6q: set the LDB serial clock parent to the video PLL   Philipp Zabel
• [PATCH 06/11] ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags   Philipp Zabel
• [PATCH 07/11] ARM i.MX53: fix ldb di divider and selector clocks   Philipp Zabel
• [PATCH 08/11] ARM i.MX6q: fix ldb di divider and selector clocks   Philipp Zabel
• [PATCH 09/11] ARM i.MX53: Add IOMUXC GPR to device tree   Philipp Zabel
• [PATCH 10/11] ARM i.MX53: Add LDB device to device tree   Philipp Zabel
• [PATCH 11/11] ARM i.MX6q: Add LDB device to device tree   Philipp Zabel
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Magnus Damm
• [PATCH 0/3 v3] ARM: shmobile: add R8A7778 Bock-W board support v3   Magnus Damm
• [PATCH for 3.9] thermal: mvebu: Fix valid check for thermal register   Zhang Rui
• [PATCH 1/2] thermal: kirkwood: Fix thermal sensor formula   Zhang Rui
• [PATCH 2/2] thermal: dove: Fix thermal sensor formula   Zhang Rui
• [PATCH 05/15] cpuidle: imx6: remove timer broadcast initialization   Shawn Guo
• [PATCH] i2c: s3c2410: Add SMBus emulation for block read   Prasanna Kumar
• [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver and its DT glue   Viresh Kumar
• [PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10   Benoit Cousson
• [PATCH 0/8] SIRF multiplatform support   Arnd Bergmann
• [PATCH 01/11] staging: drm/imx: Add LDB support   Thomas Petazzoni
• [PATCH v2 0/6] xen/arm: move to mach-virt and support SMP   Stefano Stabellini
• [PATCH v2 1/6] xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq   Stefano Stabellini
• [PATCH v2 2/6] xen/arm: SMP support   Stefano Stabellini
• [PATCH v2 3/6] xen: move the xenvm machine to mach-virt   Stefano Stabellini
• [PATCH v2 4/6] xen/arm: implement HYPERVISOR_vcpu_op   Stefano Stabellini
• [PATCH v2 5/6] xenvm: add a simple PSCI node and a second cpu   Stefano Stabellini
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Stefano Stabellini
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Peter Zijlstra
• [PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10   Santosh Shilimkar
• [PATCH v2 4/4] dmaengine: dw_dmac: simplify master selection   Andy Shevchenko
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Arnd Bergmann
• [PATCH v2 5/6] xenvm: add a simple PSCI node and a second cpu   Arnd Bergmann
• [PATCH v2 4/4] dmaengine: dw_dmac: simplify master selection   Arnd Bergmann
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH 0/3] pinctrl: exynos5440: add gpio interrupt   Kukjin Kim
• [PATCH 1/3] pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes   Kukjin Kim
• [PATCH 2/3] pinctrl: exynos5440: add gpio interrupt support   Kukjin Kim
• [PATCH 3/3] ARM: dts: list the interrupts generated by pin-controller on Exynos5440   Kukjin Kim
• [PATCH 1/2] clk: mxs: get base address from device tree   Michał Mirosław
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Laurent Pinchart
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCHv3 01/10] clocksource: add generic dummy timer driver   Mark Rutland
• [RFC PATCH v3 3/6] sched: pack small tasks   Arjan van de Ven
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH 01/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Arnd Bergmann
• [PATCH] ARM: ux500: move PM-related PRCMU functions to machine   Linus Walleij
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH v3, part4 11/39] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [PATCH v3, part4 12/39] mm/ARM64: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Vincent Guittot
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Thomas Petazzoni
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Nicolas Pitre
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Nicolas Pitre
• [PATCHv6 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCHv6 01/17] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCHv6 02/17] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
• [PATCHv6 03/17] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
• [PATCHv6 04/17] pci: infrastructure to add drivers in drivers/pci/host   Thomas Petazzoni
• [PATCHv6 05/17] arm: pci: add a align_resource hook   Thomas Petazzoni
• [PATCHv6 06/17] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
• [PATCHv6 07/17] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
• [PATCHv6 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv6 09/17] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [PATCHv6 11/17] arm: mvebu: add PCIe Device Tree informations for Armada XP   Thomas Petazzoni
• [PATCHv6 12/17] arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4   Thomas Petazzoni
• [PATCHv6 13/17] arm: mvebu: PCIe Device Tree informations for Armada XP DB   Thomas Petazzoni
• [PATCHv6 14/17] arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox   Thomas Petazzoni
• [PATCHv6 15/17] arm: mvebu: PCIe Device Tree informations for Armada 370 DB   Thomas Petazzoni
• [PATCHv6 16/17] arm: mvebu: PCIe Device Tree informations for Armada XP GP   Thomas Petazzoni
• [PATCHv6 17/17] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
• [PATCH 1/1] enet: fec: fix fail resume from suspend state   David Miller
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
• [PATCHv6 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Arnd Bergmann
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Jason Gunthorpe
• [PATCH] ARM: KVM: promote vfp_host pointer to generic host cpu context   Marc Zyngier
• [PATCH v2 5/6] xenvm: add a simple PSCI node and a second cpu   Stefano Stabellini
• mvebu: Device bus driver resurrection   Jason Gunthorpe
• [PATCH for 3.10 v2 0/4] thermal: Add Armada 370/XP support   Andrew Lunn
• [RFCv1 00/11] MSI support for Marvell EBU PCIe driver   Thomas Petazzoni
• [RFCv1 01/11] arm: mvebu: move L2 cache initialization in init_early()   Arnd Bergmann
• [RFCv1 02/11] irqchip: move IRQ driver for Armada 370/XP   Arnd Bergmann
• mvebu: Device bus driver resurrection   Thomas Petazzoni
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [PATCH v2 00/30] Port of KVM to arm64   Marc Zyngier
• [PATCH v2 01/30] arm64: add explicit symbols to ESR_EL1 decoding   Marc Zyngier
• [PATCH v2 02/30] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
• [PATCH v2 03/30] arm64: KVM: HYP mode idmap support   Marc Zyngier
• [PATCH v2 04/30] arm64: KVM: EL2 register definitions   Marc Zyngier
• [PATCH v2 05/30] arm64: KVM: system register definitions for 64bit guests   Marc Zyngier
• [PATCH v2 06/30] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Marc Zyngier
• [PATCH v2 07/30] arm64: KVM: fault injection into a guest   Marc Zyngier
• [PATCH v2 08/30] arm64: KVM: architecture specific MMU backend   Marc Zyngier
• [PATCH v2 09/30] arm64: KVM: user space interface   Marc Zyngier
• [PATCH v2 10/30] arm64: KVM: system register handling   Marc Zyngier
• [PATCH v2 11/30] arm64: KVM: CPU specific system registers handling   Marc Zyngier
• [PATCH v2 12/30] arm64: KVM: virtual CPU reset   Marc Zyngier
• [PATCH v2 13/30] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions   Marc Zyngier
• [PATCH v2 14/30] arm64: KVM: MMIO access backend   Marc Zyngier
• [PATCH v2 15/30] arm64: KVM: guest one-reg interface   Marc Zyngier
• [PATCH v2 16/30] arm64: KVM: hypervisor initialization code   Marc Zyngier
• [PATCH v2 17/30] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
• [PATCH v2 18/30] arm64: KVM: Exit handling   Marc Zyngier
• [PATCH v2 19/30] arm64: KVM: Plug the VGIC   Marc Zyngier
• [PATCH v2 20/30] arm64: KVM: Plug the arch timer   Marc Zyngier
• [PATCH v2 21/30] arm64: KVM: PSCI implementation   Marc Zyngier
• [PATCH v2 22/30] arm64: KVM: Build system integration   Marc Zyngier
• [PATCH v2 23/30] arm64: KVM: define 32bit specific registers   Marc Zyngier
• [PATCH v2 24/30] arm64: KVM: 32bit GP register access   Marc Zyngier
• [PATCH v2 25/30] arm64: KVM: 32bit conditional execution emulation   Marc Zyngier
• [PATCH v2 26/30] arm64: KVM: 32bit handling of coprocessor traps   Marc Zyngier
• [PATCH v2 27/30] arm64: KVM: CPU specific 32bit coprocessor access   Marc Zyngier
• [PATCH v2 28/30] arm64: KVM: 32bit specific register world switch   Marc Zyngier
• [PATCH v2 29/30] arm64: KVM: 32bit guest fault injection   Marc Zyngier
• [PATCH v2 30/30] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
• [RFCv1 01/11] arm: mvebu: move L2 cache initialization in init_early()   Thomas Petazzoni
• [RFCv1 00/11] MSI support for Marvell EBU PCIe driver   Thomas Petazzoni
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [RFCv1 00/11] MSI support for Marvell EBU PCIe driver   Arnd Bergmann
• [RFCv1 00/11] MSI support for Marvell EBU PCIe driver   Thomas Petazzoni
• [PATCH] irqchip: gic: fix irq_trigger return   Stephen Boyd
• [PATCHv2] ARM: Push selects for TWD/SCU into machine entries   Stephen Boyd
• [PATCH] ARM: sched_clock: Add more notrace to prevent recursion   Stephen Boyd
• Zynq core changes v2   Michal Simek
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Michal Simek
• [PATCH v2 02/10] arm: zynq: Move timer to clocksource interface   Michal Simek
• [PATCH v2 03/10] arm: zynq: Move timer to generic location   Michal Simek
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Michal Simek
• [PATCH v2 06/10] arm: zynq: Add support for system reset   Michal Simek
• [PATCH v2 07/10] arm: zynq: Add support for pmu   Michal Simek
• [PATCH v2 08/10] arm: zynq: Add smp support   Michal Simek
• [PATCH v2 09/10] arm: zynq: Add hotplug support   Michal Simek
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Michal Simek
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Jason Gunthorpe
• [PATCH 0/2] ARM: kirkwood: bug fix and extension of kirkwood i2s   Jean-Francois Moine
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Jean-Francois Moine
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Jean-Francois Moine
• [PATCH] usb: ehci: unlink_empty_async_suspended() only used with CONFIG_PM   Tony Prisk
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Paul Walmsley
• [PATCHv2] usb: ehci: unlink_empty_async_suspended() only used with CONFIG_PM   Tony Prisk
• OMAP baseline test results for v3.9-rc4   Paul Walmsley
• [PATCH v5 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Pavel Machek
• [PATCH] mfd: pm8921: Disable driver until it gets fixed   David Brown
• OMAP baseline test results for v3.9-rc3   Paul Walmsley
• [PATCH 0/2] clk: mxs: mach header cleanup   Mike Turquette
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• OMAP baseline test results for v3.9-rc3   Paul Walmsley
• OMAP baseline test results for v3.9-rc1   Paul Walmsley
• [PATCHv2] usb: ehci: unlink_empty_async_suspended() only used with CONFIG_PM   Alan Stern
• [PATCHv3 02/14] ARM: OMAP2+: mbox: remove dependencies with soc.h   Paul Walmsley
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Andrew Lunn
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Johan Hovold
• [PATCHv3 02/14] ARM: OMAP2+: mbox: remove dependencies with soc.h   Anna, Suman
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Sebastian Hesselbarth
• [PATCH] ARM: imx: replace width with mask for clk_busy_mux   Mike Turquette
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Sebastian Hesselbarth
• [PATCH] ARM: mach-imx: clk-busy: Adapt to new the clk_mux structure   Mike Turquette
• [PATCH 2/3] arm: kirkwood: factor pinmux descriptors for OpenBlocks A6   Andrew Lunn
• [PATCH] ARM: imx: replace width with mask for clk_busy_mux   Fabio Estevam
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Jean-Francois Moine
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Jean-Francois Moine
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Steffen Trumtrar
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Sebastian Hesselbarth
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thierry Reding
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH 2/2] ARM: tegra: use CS_LAR_KEY definition instead of 0xC5ACCE55   Stephen Warren
• [PATCH 1/2] ARM: tegra: use setup_mm_for_reboot rather than explicit pgd switch   Stephen Warren
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Sebastian Hesselbarth
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [PATCH] ARM: tegra: enable Tegra114 in defconfig, rebuild defconfig   Stephen Warren
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Arnd Bergmann
• [PATCH] ARM: tegra: enable Tegra114 in defconfig, rebuild defconfig   Stephen Warren
• [PATCH] ARM: ux500: move PM-related PRCMU functions to machine   Daniel Lezcano
• [PATCHv2 4/4] arm: orion5x: correct IRQ used in dtsi for mv_cesa   Alexander Clouter
• [PATCHv2 1/4] arm: orion5x: fix orion5x.dtsi gpio parameters   Alexander Clouter
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Douglas Gilbert
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thierry Reding
• [PATCH v5 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Marek Vasut
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Jason Gunthorpe
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Arnd Bergmann
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• [PATCH 4/6] pci: Add PCIe driver for Samsung Exynos   Rob Herring
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Arnd Bergmann
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Arnd Bergmann
• [PATCHv3 0/4] arm: orion5x: devicetree fixups and additions   Alexander Clouter
• [PATCHv3 1/4] arm: orion5x: fix orion5x.dtsi gpio parameters   Alexander Clouter
• [PATCHv3 2/4] arm: orion5x: add ehci bindings to dtsi   Alexander Clouter
• [PATCHv3 3/4] arm: orion5x: enable xor for orion5x platform   Alexander Clouter
• [PATCHv3 4/4] arm: orion5x: correct IRQ used in dtsi for mv_cesa   Alexander Clouter
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Arnd Bergmann
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• [PATCHv3 0/4] arm: orion5x: devicetree fixups and additions   Andrew Lunn
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Jason Gunthorpe
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Arnd Bergmann
• [PATCH v6 0/7] move s3c24xx-irq to drivers/irqchip and add dt support   Heiko Stübner
• [PATCH v6 1/7] ARM: S3C24XX: move irq driver to drivers/irqchip   Heiko Stübner
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Thomas Petazzoni
• [PATCH v6 2/7] irqchip: s3c24xx: fix comments on some camera interrupts   Heiko Stübner
• [PATCH v6 3/7] irqchip: s3c24xx: fix irqlist of second s3c2416 controller   Heiko Stübner
• [PATCH v6 4/7] irqchip: s3c24xx: add irq_set_type callback for basic interrupt types   Heiko Stübner
• [PATCH v6 5/7] irqchip: s3c24xx: globally keep track of the created intc instances   Heiko Stübner
• [PATCH v6 6/7] irqchip: s3c24xx: make interrupt handling independent of irq_domain structure   Heiko Stübner
• [PATCH v6 7/7] irqchip: s3c24xx: add devicetree support   Heiko Stübner
• [PATCH v6 0/7] move s3c24xx-irq to drivers/irqchip and add dt support   Arnd Bergmann
• [RFCv1 07/11] irqchip: armada-370-xp: add MSI support to interrupt controller driver   Jason Gunthorpe
• [PATCH v3 0/4] Preparatory GIC patches for arm64 support   Catalin Marinas
• IMX: board hardware macro   Daniel Lezcano
• [PATCH RFC] MSI style interrupt controller for the Host2CPU doorbell on kirkwood   Jason Gunthorpe
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Jason Cooper
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Sören Brinkmann
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Jason Gunthorpe
• [PATCH 1/1] enet: fec: fix fail resume from suspend state   Frank Li
• [PATCH] ARM: tegra: add clocks property to sound nodes   Stephen Warren
• OK to use commit 71856843 as base for further omap clean up?   Russell King - ARM Linux
• [RFC patch 02/11] cpuidle / arm : a single cpuidle driver   Rafael J. Wysocki
• [PATCH] arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.   Ryan Press
• [PATCH] serial: 8250_dw: add support for clk api   Greg Kroah-Hartman
• [PATCH 3/6] ARM: remove fa526 CPU support   Tomasz Figa
• [PATCH v2 0/4] clk: samsung: pm fixes and multiple aliases   Mike Turquette
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [PATCH 4/6] pci: Add PCIe driver for Samsung Exynos   Jingoo Han
• [PATCH] clk: divider: Use DIV_ROUND_CLOSEST   Mike Turquette
• [PATCH] arm:exynos5250: Restore CLK_SRC_TOP3 register via CCF   Mike Turquette
• [PATCH 0/8] SIRF multiplatform support   Barry Song
• omap cpufreq driver in multi-platform kernels   Rob Herring
• [RFCv1 01/11] arm: mvebu: move L2 cache initialization in init_early()   Rob Herring
• [PATCH v2 0/3] clock driver for sunxi   Mike Turquette
• [PATCH] [media] s5p-mfc: Change MFC clock reference w.r.t Common Clock Framework   Mike Turquette
• [PATCH] clk: exynos5250: Added MUX, DIV and GATE clocks for Gscaler and MFC   Mike Turquette
• [PATCH v2 1/1 net] enet: fec: fix fail resume from suspend state   Frank Li
• RFC v2: Zynq Clock Controller   Mike Turquette
• omap cpufreq driver in multi-platform kernels   Paul Walmsley
• [PATCH 0/2] rename sunxi clock compatible strings   Emilio López
• [PATCH 1/2] clk: sunxi: rename compatible strings   Emilio López
• [PATCH 2/2] arm: sunxi: rename clock compatible strings   Emilio López
• [PATCH] arm: prima2: export sirfsoc_reset_device as the common API of drivers   Barry Song
• [query] IMX6 DTS : Device node with two interrupt parents   Pankaj Chauhan
• [PATCH 1/2] clk: mxs: get base address from device tree   Shawn Guo
• [PATCH 1/5] clk: allow reentrant calls into the clk framework   Bill Huang
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Simon Horman
• [PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10   Simon Horman
• [PATCH 1/2] ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support   Simon Horman
• [PATCH 2/2] ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver   Simon Horman
• [RFC PATCH v3 3/6] sched: pack small tasks   Preeti U Murthy
• [RFC PATCH v3 3/6] sched: pack small tasks   Alex Shi
• [PATCH 0/3 v3] ARM: shmobile: add R8A7778 Bock-W board support v3   Simon Horman
• [PATCH 00/03 v3] ARM: shmobile: r8a73a4 APE6EVM board support   Simon Horman
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Alex Shi
• [PATCH v2] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Paul Walmsley
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• [PATCH v3 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Simon Horman
• [PATCH] ARM: shmobile: r8a73a4: add thermal driver support   Simon Horman
• [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support   Simon Horman
• [PATCHv2] usb: ehci: unlink_empty_async_suspended() only used with CONFIG_PM   Tony Prisk
• [PATCH v4 0/3] CPUFreq for sh73a0 / kzm9g, using cpufreq-cpu0   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Simon Horman
• [PATCH 0/3] ARM: shmobile: Add SMSC support on Bock-W   Simon Horman
• [PATCH 0/2] ARM: shmobile: sh73a0 Suspend-to-RAM   Simon Horman
• [PATCH 0/3] ARM: shmobile: kzm9g: add irqpin to DT   Simon Horman
• [PATCH v3 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Kuninori Morimoto
• [PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Hiremath, Vaibhav
• IMX: board hardware macro   Shawn Guo
• [PATCHv6 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thierry Reding
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Gregory CLEMENT
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Steffen Trumtrar
• [query] IMX6 DTS : Device node with two interrupt parents   Shawn Guo
• [PATCH v4] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Jean-Francois Moine
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Michal Simek
• [PATCH 0/3] DT support for da850-evm LCD   Philip Avinash
• [PATCH 1/3] ARM: davinci: da850: Add LCDC DT entries   Philip Avinash
• [PATCH 2/3] ARM: davinci: da850: override LCDC DT node device name   Philip Avinash
• [PATCH 3/3] ARM: davinci: da850 evm: Add da850-evm LCD panel support   Philip Avinash
• [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support   Kuninori Morimoto
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Michal Simek
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Vincent Guittot
• [PATCH 01/10] gpio: tegra: add gpio wakeup source handling   Linus Walleij
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Magnus Damm
• [PATCH V2 1/9] gpio: tegra: add gpio wakeup source handling   Linus Walleij
• [PATCH V3 1/9] gpio: tegra: add gpio wakeup source handling   Linus Walleij
• [PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10   Laurent Pinchart
• [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC   Jingoo Han
• [PATCH] ARM: ux500: move PM-related PRCMU functions to machine   Rickard Andersson
• [PATCH 1/5] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH 1/2] clk: sunxi: rename compatible strings   Mike Turquette
• [Bulk] Re: [PATCH 2/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Linus Walleij
• [PATCH] drivers: gpio: Use devm_ioremap_resource function   Linus Walleij
• [PATCH v5 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Philipp Zabel
• [RFC 00/14] Add DT support to OMAPDSS   Tomi Valkeinen
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [PATCH 0/6] fb: vt8500: patches for 3.10   Tony Prisk
• [PATCH 1/6] video: vt8500: Make wmt_ge_rops optional   Tony Prisk
• [PATCH 2/6] video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h   Tony Prisk
• [PATCH 3/6] video: vt8500: Correct descriptions in video/Kconfig   Tony Prisk
• [PATCH 4/6] drivers/video/wm8505fb.c: use devm_ functions   Tony Prisk
• [PATCH 5/6] video: vt8500: Adjust contrast in wm8505 framebuffer driver.   Tony Prisk
• [PATCH 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Alex Shi
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Peter Zijlstra
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [GIT PULL] at91: soc for 3.10 #2   Nicolas Ferre
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [PATCH for 3.10 0/4] thermal: Add Armada 370/XP support   Ezequiel Garcia
• [PATCH v2 08/10] arm: zynq: Add smp support   Michal Simek
• [RFC PATCH] CLK: Allow parent clock and rate to be configured in DT.   Sascha Hauer
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Steffen Trumtrar
• [PATCH v4] clk: allow reentrant calls into the clk framework   Laurent Pinchart
• OMAP baseline test results for v3.9-rc3   Tero Kristo
• IMX: board hardware macro   Daniel Lezcano
• [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support   Magnus Damm
• [GIT PULL] ARM: LPC32xx: defconfig update   Roland Stigge
• [PATCH] ARM: shmobile: r8a73a4: add thermal driver support   Magnus Damm
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Michal Simek
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Arnd Bergmann
• [RFC 02/14] ARM: OMAP2+: add omapdss_init_of()   Benoit Cousson
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Arnd Bergmann
• [PATCH 1/2] clk: sunxi: rename compatible strings   Emilio López
• [RFC 00/14] Add DT support to OMAPDSS   Benoit Cousson
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Arnd Bergmann
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Steffen Trumtrar
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH v4] clk: allow reentrant calls into the clk framework   Thomas Gleixner
• [RFC 00/14] Add DT support to OMAPDSS   Benoit Cousson
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Steffen Trumtrar
• [PATCH] ARM: mach-imx: clk-busy: Adapt to new the clk_mux structure   Peter De Schrijver
• [PATCH V3 0/3] clk: Fixup issues for clk_set_parent   Ulf Hansson
• [PATCH V3 1/3] clk: Restructure code for __clk_reparent   Ulf Hansson
• [PATCH V3 2/3] clk: Fixup errorhandling for clk_set_parent   Ulf Hansson
• [PATCH V3 3/3] clk: Fixup locking issues for clk_set_parent   Ulf Hansson
• [PATCH] ARM i.MX53: Add GPU clocks to clock tree   Philipp Zabel
• [PATCH v2 01/10] arm: zynq: Use standard timer binding   Michal Simek
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Magnus Damm
• [PATCH v4] clk: allow reentrant calls into the clk framework   Viresh Kumar
• [PATCH v6 3/5] mmc: davinci_mmc: add DT support   Manjunathappa, Prakash
• [PATCH v4] clk: allow reentrant calls into the clk framework   Laurent Pinchart
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Arnd Bergmann
• [PATCH v4] clk: allow reentrant calls into the clk framework   Ulf Hansson
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Sekhar Nori
• [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Vaibhav Hiremath
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Daniel Lezcano
• [RFCv1 09/11] pci: mvebu: add MSI support   Andrew Murray
• [RFC 02/14] ARM: OMAP2+: add omapdss_init_of()   Tomi Valkeinen
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Daniel Lezcano
• [RFC 00/14] Add DT support to OMAPDSS   Tomi Valkeinen
• [PATCH v6 1/3] serial: sh-sci: Add OF support   Laurent Pinchart
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Linus Walleij
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Jean-Francois Moine
• [RFC PATCH v3 3/6] sched: pack small tasks   Preeti U Murthy
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Vincent Guittot
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Michal Simek
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Catalin Marinas
• [PATCH 2/4] ARM: tlb: don't perform inner-shareable invalidation for local BP ops   Catalin Marinas
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Barry Song
• [PATCH v9 3/3] ARM: ARMv7-M: Allow the building of new kernel port   Jonathan Austin
• [PATCH v2 10/10] arm: zynq: Add cpuidle support   Daniel Lezcano
• [RFC 00/14] Add DT support to OMAPDSS   Tomi Valkeinen
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Steffen Trumtrar
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Stephen Rothwell
• [PATCH v6 3/5] mmc: davinci_mmc: add DT support   Arnd Bergmann
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Arnd Bergmann
• [PATCH 1/3 v3] ARM: shmobile: add R8A7778 basis support   Simon Horman
• [PATCH 2/3 v3] ARM: shmobile: r8a7778 SCIF support   Simon Horman
• [PATCH 3/3 v3] ARM: shmobile: add R-Car M1A Bock-W platform support   Simon Horman
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH 1/3] ARM: shmobile: irqpin: fix handling of spurious interrupts in DT case   Simon Horman
• [PATCH 3/3] ARM: shmobile: kzm9g-reference: add ethernet support   Simon Horman
• [PATCH 2/3] ARM: shmobile: sh73a0: add irqpin DT nodes   Simon Horman
• [PATCH v2 04/10] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Catalin Marinas
• [PATCH v10 0/3] ARM: ARMv7-M (i.e. Cortex-M3) support   Uwe Kleine-König
• [PATCH v10 1/3] ARM: Add base support for ARMv7-M   Uwe Kleine-König
• [PATCH v10 2/3] ARM: ARMv7-M: Add support for exception handling   Uwe Kleine-König
• [PATCH v10 3/3] ARM: ARMv7-M: Allow the building of new kernel port   Uwe Kleine-König
• [PATCH 4/4] ARM: atomics: don't use exclusives for atomic64 read/set with LPAE   Catalin Marinas
• [PATCH v9 3/3] ARM: ARMv7-M: Allow the building of new kernel port   Uwe Kleine-König
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10   Simon Horman
• [PATCH 00/21] Various fixes and extensions to Exynos4 clock driver   Tomasz Figa
• [PATCH 01/21] clk: samsung: exynos4: Correct sclk_mfc clock definition   Tomasz Figa
• [PATCH 02/21] clk: samsung: exynos4: Use mout_mpll_user_* on Exynos4x12   Tomasz Figa
• [PATCH 03/21] clk: samsung: exynos4: Add missing mout_mipihsi clock   Tomasz Figa
• [PATCH 04/21] clk: samsung: exynos4: Add missing sclk_audio0 clock   Tomasz Figa
• [PATCH 05/21] clk: samsung: exynos4: Export sclk_pcm0   Tomasz Figa
• [PATCH 06/21] clk: samsung: exynos4: Move dac and mixer to Exynos4210-specific clocks   Tomasz Figa
• [PATCH 07/21] clk: samsung: exynos4: Export clocks used by exynos cpufreq drivers   Tomasz Figa
• [PATCH 08/21] clk: samsung: pll: Remove unimplemented ops   Tomasz Figa
• [PATCH 09/21] clk: samsung: exynos4: Export mout_core clock of Exynos4210   Tomasz Figa
• [PATCH 10/21] clk: samsung: exynos4: Add camera related clock definitions   Tomasz Figa
• [PATCH 11/21] clk: samsung: exynos4: Add G3D clocks   Tomasz Figa
• [PATCH 12/21] clk: samsung: exynos4: Add missing CMU_TOP and ISP clocks   Tomasz Figa
• [PATCH 13/21] clk: samsung: exynos4: Add missing mout_sata on Exynos4210   Tomasz Figa
• [PATCH 14/21] clk: samsung: exynos4: Define {E,V}PLL registers   Tomasz Figa
• [PATCH 15/21] clk: samsung: exynos4: Use SRC_MASK_PERIL{0,1} definitions   Tomasz Figa
• [PATCH 16/21] clk: samsung: exynos4: Remove SoC-specific registers from save list   Tomasz Figa
• [PATCH 17/21] clk: samsung: exynos4: Add E4210 prefix to LCD1 clock registers   Tomasz Figa
• [PATCH 18/21] clk: samsung: exynos4: Add E4210 prefix to GATE_IP_PERIR register   Tomasz Figa
• [PATCH 19/21] clk: samsung: exynos4: Remove E4X12 prefix from SRC_DMC register   Tomasz Figa
• [PATCH 20/21] clk: samsung: exynos4: Add missing registers to suspend save list   Tomasz Figa
• [PATCH 21/21] clk: samsung: exynos4: Add support for SoC-specific register save list   Tomasz Figa
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Michael Grzeschik
• [PATCH 1/3] ARM: cacheflush: don't round address range up to nearest page   Catalin Marinas
• [PATCH v4] clk: allow reentrant calls into the clk framework   Thomas Gleixner
• [PATCH 2/3] ARM: cacheflush: don't bother rounding to nearest vma   Catalin Marinas
• [PATCH 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tomi Valkeinen
• [PATCH 3/3] ARM: cacheflush: add new iovec-based cache flushing system call   Catalin Marinas
• [PATCH v2 6/6] [RFC] arm: use PSCI if available   Stefano Stabellini
• [RFC PATCH v3 3/6] sched: pack small tasks   Catalin Marinas
• [PATCH 0/2] ARM: imx35 clk bugfixes   Markus Pargmann
• [PATCH 1/2] ARM: clk: Bugfix imx35 iomux clock   Markus Pargmann
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Markus Pargmann
• [PATCH v4] clk: allow reentrant calls into the clk framework   Thomas Gleixner
• [GIT PULL] at91: fixes for 3.9-rc #2   Nicolas Ferre
• [GIT PULL v2] Renesas ARM-based SoC board updates for v3.10   Arnd Bergmann
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Chen Gang
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Simon Horman
• [PATCH/RFC] ARM: shmobile: Disallow PINCTRL without GPIOLIB   Simon Horman
• [PATCH 01/11] staging: drm/imx: Add LDB support   Martin Fuzzey
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Catalin Marinas
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Philipp Zabel
• [PATCH 01/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Andrew Lunn
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Simon Horman
• [Suggestion] ARM64:kernel: compiling issue for early_console.   Chen Gang
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Will Deacon
• [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support   Simon Horman
• [PATCH v5 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Shawn Guo
• [PATCH 0/1] ARM: shmobile: r8a73a4 thermal support   Simon Horman
• [PATCH v5 8/8] reset: Add driver for gpio-controlled reset pins   Shawn Guo
• [PATCH] ARM: shmobile: r8a73a4: add thermal driver support   Simon Horman
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Markus Pargmann
• [PATCH 2/3] ARM: cacheflush: don't bother rounding to nearest vma   Will Deacon
• [PATCH 2/2] ARM: kirkwood: extend the kirkwood i2s driver for DT usage   Jean-Francois Moine
• [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
• [PATCH 2/3] ARM: cacheflush: don't bother rounding to nearest vma   Catalin Marinas
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Catalin Marinas
• IMX: board hardware macro   Shawn Guo
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Mark Brown
• [PATCH 2/3] ARM: cacheflush: don't bother rounding to nearest vma   Will Deacon
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH] mfd: ab8500-core: Ignore masked out interrupts   Linus Walleij
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Will Deacon
• [PATCH 0/5] ARM: dts: AM33XX: Cleanup and pinctrl binding support   Vaibhav Hiremath
• [PATCH 1/5] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM   Vaibhav Hiremath
• [PATCH 2/5] ARM: dts: AM33XX: Add default pinctrl binding for I2C device   Vaibhav Hiremath
• [PATCH 3/5] ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM   Vaibhav Hiremath
• [PATCH 4/5] ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node   Vaibhav Hiremath
• [PATCH 5/5] ARM: dts: AM33XX: Add default pinctrl binding for UART0 device   Vaibhav Hiremath
• [PATCH v2 0/5] ARM: imx cpufreq-cpu0   Markus Pargmann
• [PATCH v2 1/5] cpufreq: cpufreq-cpu0: Fix documentation example   Markus Pargmann
• [PATCH v2 2/5] ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0   Markus Pargmann
• [PATCH v2 3/5] ARM: imx27 DT init cpufreq-cpu0 device   Markus Pargmann
• [PATCH v2 4/5] ARM: imx5 DT init cpufreq-cpu0 device   Markus Pargmann
• [PATCH v2 5/5] ARM: imx: Remove cpufreq driver   Markus Pargmann
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Philip Balister
• [PATCH v3] of/pci: Provide support for parsing PCI DT ranges property   Thierry Reding
• [PATCH 2/3] ARM: cacheflush: don't bother rounding to nearest vma   Catalin Marinas
• linux-next build failures with ARCH_EXYNOS   Tomasz Figa
• [PATCH] pinctrl: sunxi: Rename wemac functions to emac   Maxime Ripard
• [PATCH 4/6] pinctrl: sunxi: add clock support   Linus Walleij
• [PATCH V2 0/6] remove the clock name from pdata   Felipe Balbi
• [PATCH v9 05/11] gpio: palmas: add in GPIO support for palmas charger   Linus Walleij
• [PATCH 3/5] ARM: ux500: Remove platform specific PRCMU and Clk initialisation   Linus Walleij
• [PATCH 4/5] ARM: ux500: Supply a DTS file for the u8540 platform   Linus Walleij
• [PATCH 1/5] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM   Peter Korsgaard
• [PATCH 3/5] ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM   Peter Korsgaard
• [PATCH v2 1/2] gpio: mvebu: add dbg_show function   Linus Walleij
• [PATCH 1/5] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM   Matt Porter
• [PATCH 2/5] ARM: dts: AM33XX: Add default pinctrl binding for I2C device   Matt Porter
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Michal Simek
• omap cpufreq driver in multi-platform kernels   Nishanth Menon
• [RFC PATCH v3 5/6] sched: pack the idle load balance   Alex Shi
• [PATCH 5/5] ARM: dts: AM33XX: Add default pinctrl binding for UART0 device   Matt Porter
• [PATCH v3] [RFC] arm: use PSCI if available   Marc Zyngier
• [PATCH v2 1/5] cpufreq: cpufreq-cpu0: Fix documentation example   Shawn Guo
• [PATCH v3] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH] ARM i.MX53: Add GPU clocks to clock tree   Shawn Guo
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Catalin Marinas
• [PATCH] ARM: imx: Add support for the Armadeus Systems APF27Dev docking board   Gwenhael Goavec-Merou
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH v2 01/30] arm64: add explicit symbols to ESR_EL1 decoding   Catalin Marinas
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• IMX: board hardware macro   Daniel Lezcano
• [PATCH v4 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Bastian Hecht
• [PATCH v4 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Bastian Hecht
• [PATCH 1/4] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Will Deacon
• linux-next build failures with ARCH_EXYNOS   Thomas Abraham
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [GIT PULL] Renesas fbdev fixes for v3.9   Simon Horman
• [PATCH] fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings   Simon Horman
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• [PATCH v2 5/5] ARM: imx: Remove cpufreq driver   Shawn Guo
• [PATCH v2 01/30] arm64: add explicit symbols to ESR_EL1 decoding   Marc Zyngier
• [PATCH 13/15] ARM: shmobile: pm: fix init sections   Simon Horman
• [PATCH 14/15] ARM: shmobile: cpuidle: remove useless WFI function   Simon Horman
• [PATCH 15/15] ARM: shmobile: cpuidle: use init/exit common routine   Simon Horman
• [PATCH v2 02/30] arm64: KVM: define HYP and Stage-2 translation page flags   Catalin Marinas
• [PATCH v3 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• [PATCH 3/5] ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM   Matt Porter
• [RFC PATCH v3 3/6] sched: pack small tasks   Peter Zijlstra
• [PATCH v2 05/10] arm: zynq: Move slcr initialization to separate file   Michal Simek
• [PATCH v2 02/30] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
• [PATCH v4] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCHv7 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
• [PATCHv7 01/17] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCHv7 02/17] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
• [PATCHv7 03/17] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
• [PATCHv7 04/17] pci: infrastructure to add drivers in drivers/pci/host   Thomas Petazzoni
• [PATCHv7 05/17] arm: pci: add a align_resource hook   Thomas Petazzoni
• [PATCHv7 06/17] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
• [PATCHv7 07/17] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
• [PATCHv7 08/17] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
• [PATCHv7 09/17] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
• [PATCHv7 10/17] arm: mvebu: add PCIe Device Tree informations for Armada 370   Thomas Petazzoni
• [PATCHv7 11/17] arm: mvebu: add PCIe Device Tree informations for Armada XP   Thomas Petazzoni
• [PATCHv7 12/17] arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4   Thomas Petazzoni
• [PATCHv7 13/17] arm: mvebu: PCIe Device Tree informations for Armada XP DB   Thomas Petazzoni
• [PATCHv7 14/17] arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox   Thomas Petazzoni
• [PATCHv7 15/17] arm: mvebu: PCIe Device Tree informations for Armada 370 DB   Thomas Petazzoni
• [PATCHv7 16/17] arm: mvebu: PCIe Device Tree informations for Armada XP GP   Thomas Petazzoni
• [PATCHv7 17/17] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
• [PATCH] clk: zynq: Add missing zynq clk header   Michal Simek
• [PATCH 03/15] cpuidle: ux500: remove timer broadcast initialization   Linus Walleij
• [PATCH 08/15] ARM: ux500: cpuidle: use init/exit common routine   Linus Walleij
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Markus Pargmann
• [PATCH for 3.10 0/4] thermal: Add Armada 370/XP support   Jason Cooper
• [PATCH v4] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api   Linus Walleij
• [PATCH v2 5/5] ARM: imx: Remove cpufreq driver   Markus Pargmann
• [PATCH] ARM: ux500: update V-INTCORE constraints   Fabio Baltieri
• [PATCH 1/2] clk: sunxi: rename compatible strings   Mike Turquette
• [RFC PATCH v3 3/6] sched: pack small tasks   Nicolas Pitre
• [PATCH] clk: zynq: Add missing zynq clk header   Mike Turquette
• [PATCH 00/04 v2] ARM: shmobile: r8a7790 SoC   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7790 SoC support   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a7790 SCIF support   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a7790 IRQC support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: r8a7790 PFC support   Magnus Damm
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Mark Brown
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH] arm: kvm: arch_timer: use symbolic constants   Mark Rutland
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• [PATCH 6/6] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC   Jason Gunthorpe
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [RFC PATCH v3 3/6] sched: pack small tasks   Catalin Marinas
• [PATCH 2/2] ARM: clk: imx35 sound admux_gate bugfix   Markus Pargmann
• [PATCH 00/04] ARM: shmobile: r8a73a4 SoC support V3   Magnus Damm
• omap cpufreq driver in multi-platform kernels   Rob Herring
• [PATCH v4] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Stephen Warren
• [PATCH v2] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized   Tony Lindgren
• omap cpufreq driver in multi-platform kernels   Nishanth Menon
• [PATCH v3] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH v4] clk: allow reentrant calls into the clk framework   Thomas Gleixner
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH 0/5] arm: arch_timer cleanups and niceties for 3.10   Mark Rutland
• [PATCH 1/5] ARM: hyp: initialize CNTVOFF to zero   Mark Rutland
• [PATCH 2/5] ARM: KVM: arch_timers: zero CNTVOFF upon return to host   Mark Rutland
• [PATCH 3/5] clocksource: arch_timer: use virtual counters   Mark Rutland
• [PATCH 4/5] arm: fix up ARM_ARCH_TIMER selects   Mark Rutland
• [PATCH 5/5] ARM: arch_timer: stop virtual timer when booted in HYP mode   Mark Rutland
• [PATCH v4] clk: allow reentrant calls into the clk framework   Thomas Gleixner
• [PATCH] ARM: tegra: add clocks property to sound nodes   Stephen Warren
• [RFC PATCH v3 3/6] sched: pack small tasks   Nicolas Pitre
• [RFC PATCH v3 3/6] sched: pack small tasks   Vincent Guittot
• [PATCH v3] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH v3] [RFC] arm: use PSCI if available   Nicolas Pitre
• [PATCH v2 0/11] LVDS Display Bridge support for i.MX   Philipp Zabel
• [PATCH v2 01/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH v2 02/11] ARM i.MX5: Move IPU clock lookups into device tree   Philipp Zabel
• [PATCH v2 03/11] ARM i.MX6q: export imx6q_revision   Philipp Zabel
• [PATCH v2 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Philipp Zabel
• [PATCH v2 05/11] ARM i.MX6q: set the LDB serial clock parent to the video PLL   Philipp Zabel
• [PATCH v2 06/11] ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags   Philipp Zabel
• [PATCH v2 07/11] ARM i.MX53: fix ldb di divider and selector clocks   Philipp Zabel
• [PATCH v2 08/11] ARM i.MX6q: fix ldb di divider and selector clocks   Philipp Zabel
• [PATCH v2 09/11] ARM i.MX53: Add IOMUXC GPR to device tree   Philipp Zabel
• [PATCH v2 10/11] ARM i.MX53: Add LDB device to device tree   Philipp Zabel
• [PATCH v2 11/11] ARM i.MX6q: Add LDB device to device tree   Philipp Zabel
• [RFC PATCH v3 3/6] sched: pack small tasks   Catalin Marinas
• [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Paul Walmsley
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH v6 3/5] mmc: davinci_mmc: add DT support   Manjunathappa, Prakash
• omap cpufreq driver in multi-platform kernels   Paul Walmsley
• [PATCH v3] [RFC] arm: use PSCI if available   Arnd Bergmann
• [PATCH] [media] s5p-mfc: Change MFC clock reference w.r.t Common Clock Framework   Sylwester Nawrocki
• [PATCH 0/5] arm: arch_timer cleanups and niceties for 3.10   Santosh Shilimkar
• [GIT PULL] ARM: OMAP2+: clkdev flags removal for 3.10 cleanup   Tony Lindgren
• omap cpufreq driver in multi-platform kernels   Kevin Hilman
• omap cpufreq driver in multi-platform kernels   Nishanth Menon
• [RFC PATCH v3 3/6] sched: pack small tasks   Catalin Marinas
• omap cpufreq driver in multi-platform kernels   Nishanth Menon
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Tony Lindgren
• [PATCH v3] [RFC] arm: use PSCI if available   Arnd Bergmann
• [RFC PATCHv1 0/5] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
• [RFC PATCHv1 1/5] pci: mvebu: enable driver usage on Kirkwood   Thomas Petazzoni
• [RFC PATCHv1 2/5] bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood   Thomas Petazzoni
• [RFC PATCHv1 3/5] arm: mach-kirkwood: seperate PCIe window init from other windows   Thomas Petazzoni
• [RFC PATCHv1 4/5] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Thomas Petazzoni
• [RFC PATCHv1 5/5] arm: kirkwood: convert db-88f6281 to the Device Tree   Thomas Petazzoni
• [RFC PATCHv1 0/5] Use the mvebu PCIe driver on Kirkwood   Arnd Bergmann
• [PATCH v2 1/1 net] enet: fec: fix fail resume from suspend state   David Miller
• [RFC PATCHv1 0/5] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
• [PATCH v3] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [RFC PATCHv1 0/5] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [RFC PATCHv1 3/5] arm: mach-kirkwood: seperate PCIe window init from other windows   Jason Gunthorpe
• [PATCH 3/9] ARM: OMAP2+: PM: Remove bogus fiq_[enable/disable] tuple   Kevin Hilman
• [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow   Naveen Krishna Ch
• [PATCH V2 8/8] cpufreq: OMAP: donot allow to be used with device tree   Kevin Hilman
• [PATCH v2 01/11] staging: drm/imx: Add LDB support   Martin Fuzzey
• [PATCH 1/9] ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures   Kevin Hilman
• [PATCH 4/9] ARM: OMAP4+: Remove the un-necessary cache flush from hotplug code   Kevin Hilman
• [PATCH v2 10/11] ARM i.MX53: Add LDB device to device tree   Martin Fuzzey
• [GIT PULL] omap fixes for v3.9-rc4   Tony Lindgren
• [GIT PULL] Renesas fbdev fixes for v3.9   Arnd Bergmann
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Kevin Hilman
• [PATCH 8/9] ARM: OMAP4: PM: Remove L4 wakeup depedency with MPU since errata fix exist now   Kevin Hilman
• [PATCH 9/9] ARM: OMAP4: PM: Now remove L4 per clockdomain static depedency with MPU   Kevin Hilman
• [PATCH 8/9] ARM: OMAP4: PM: Remove L4 wakeup depedency with MPU since errata fix exist now   Peter Korsgaard
• [GIT PULL] at91: soc for 3.10 #2   Arnd Bergmann
• [PATCH 3/9] ARM: OMAP2+: PM: Remove bogus fiq_[enable/disable] tuple   Santosh Shilimkar
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Santosh Shilimkar
• [GIT PULL] omap fixes for v3.9-rc4   Arnd Bergmann
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Santosh Shilimkar
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH v3] [RFC] arm: use PSCI if available   Arnd Bergmann
• [PATCH] ARM: KVM: promote vfp_host pointer to generic host cpu context   Marc Zyngier
• [GIT PULL] omap fixes for v3.9-rc4   Tony Lindgren
• [PATCH 4/5] arm: fix up ARM_ARCH_TIMER selects   Stephen Warren
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Tony Lindgren
• [PATCH 4/6] pinctrl: sunxi: add clock support   Maxime Ripard
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Shilimkar, Santosh
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Tony Lindgren
• [RFC PATCHv1 3/5] arm: mach-kirkwood: seperate PCIe window init from other windows   Thomas Petazzoni
• [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Tony Lindgren
• [PATCH 2/2] arm: sunxi: rename clock compatible strings   Maxime Ripard
• [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Kevin Hilman
• [PATCH 4/9] ARM: OMAP4+: Remove the un-necessary cache flush from hotplug code   Santosh Shilimkar
• [PATCH 1/9] ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures   Tony Lindgren
• [PATCH 1/9] ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures   Santosh Shilimkar
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Santosh Shilimkar
• [PATCH 1/9] ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures   Santosh Shilimkar
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH V2 8/8] cpufreq: OMAP: donot allow to be used with device tree   Nishanth Menon
• [GIT PULL PATCH 0/3] Ux500 devicetree fixes   Linus Walleij
• [PATCH 1/3] ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT   Linus Walleij
• [PATCH 2/3] ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back   Linus Walleij
• [PATCH 3/3] ARM: ux500: Enable the clock controlling Ethernet on Snowball   Linus Walleij
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH v2 0/6] clk: sunxi: gates support   Emilio López
• [PATCH v2 1/7] clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates   Emilio López
• [PATCH v2 2/7] arm: sunxi: Add clock definitions for AXI, AHB, APB0, APB1 gates   Emilio López
• [PATCH v2 3/7] arm: sunxi: use the right clock phandles for UARTs   Emilio López
• [PATCH v2 4/7] pinctrl: sunxi: add clock support   Emilio López
• [PATCH v2 5/7] arm: sunxi: Add clock to pinctrl node   Emilio López
• [PATCH v2 6/7] clk: sunxi: drop CLK_IGNORE_UNUSED   Emilio López
• [PATCH v2 7/7] clk: sunxi: drop an unnecesary kmalloc   Emilio López
• [GIT PULL PATCH 0/3] Ux500 devicetree fixes   Arnd Bergmann
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Linus Walleij
• [PATCH -next] pinctrl: sirf: using for_each_set_bit to simplify the code   Linus Walleij
• [PATCH v6 7/7] irqchip: s3c24xx: add devicetree support   Rob Herring
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Linus Walleij
• [PATCH v3] ARM: ux500: select WATCHDOG and MUSB for ux500   Linus Walleij
• [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array   Linus Walleij
• [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array   Woodhouse, David
• [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array   Linus Walleij
• [GIT PULL] ep93xx-fixes for 3.9-rc5   Ryan Mallon
• [PATCH v4] clk: allow reentrant calls into the clk framework   Russell King - ARM Linux
• [PATCH 1/2] ARM: kirkwood: fix a not initialized variable in the sound subsystem   Russell King - ARM Linux
• [PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct   Stephen Warren
• [PATCH] serial: samsung: Use printk instead of printascii for S3C_PMDBG   Michael Spang
• [PATCH] video: fixed missing iounmap coccinelle errors   Andrei Epure
• [PATCH v2] ARM: add support for context tracking subsystem   Kevin Hilman
• [PATCH] video: fix invalid free of devm_ allocated data   Andrei Epure
• [PATCH 07/46] regulator: ab8500: Add support of low voltage battery   Mark Brown
• [PATCH 08/46] ARM: ux500: Update displays in vaux1 consumer list   Mark Brown
• [PATCH 13/46] ARM: ux500: Add supply for the L3G4200D Gyroscope   Mark Brown
• [PATCH 14/46] ARM: ux500: Add supply for the Ambient light sensor device   Mark Brown
• [PATCH 15/46] ARM: ux500: Add supply for the Pressure sensor   Mark Brown
• [PATCH 16/46] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen   Mark Brown
• [PATCH 17/46] ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1   Mark Brown
• [PATCH 18/46] regulator: ab8500: Clean out SoC registers   Mark Brown
• [PATCH 21/46] regulator: ab8500: Correct TVOUT regulator start-up delay   Mark Brown
• [PATCH 24/46] ARM: ux500: regulator: Add accelerometer and fix magnetometer supply device ID   Mark Brown
• [PATCH 28/46] regulator: ab8500: Delete useless fixed_uV field   Mark Brown
• [PATCH 37/46] regulator: ab8500-ext: Adapt regulator registration for newly changed API   Mark Brown
• [PATCH 44/46] regulator: ab8500: Amend the update value for AB8500_LDO_INTCORE regulator   Mark Brown
• [PATCH 46/46] ARM: ux500: Regulators: Bring the AB8500 regulator platform data up-to-date   Mark Brown
• [PATCH V2 0/6] remove the clock name from pdata   Chao Xie
• [PATCH V2 3/6] usb: ehci: mv_ehci: remove unused clock   Chao Xie
• [PATCH v4 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• [PATCH v4 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC   Simon Horman
• [PATCH V2 4/6] arm: mmp: remove clock from usb pdata for aspenite   Chao Xie
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Neil Greatorex
• [PATCH V2 4/6] arm: mmp: remove clock from usb pdata for aspenite   Haojian Zhuang
• [PATCH V2 5/6] arm: mmp: remove clock name from usb pdata for ttc   Haojian Zhuang
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Zhang Rui
• [PATCH v2 5/5] ARM: imx: Remove cpufreq driver   Shawn Guo
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Ryan Press
• [PATCH] ARM: imx: Add support for the Armadeus Systems APF27Dev docking board   Shawn Guo
• [GIT PULL] imx fixes for 3.9, take 4   Shawn Guo
• Question about crashkernel parameter on cmdline   Li Haifeng
• [PATCH v4] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH] ARM: mvebu: Add gpio button to Mirabox board   Ezequiel Garcia
• [PATCH v2 1/4] thermal: Add driver for Armada 370/XP SoC thermal management   Ezequiel Garcia
• [PATCH] ARM: davinci: use is IS_ENABLED macro   Prabhakar Lad
• [PATCH v5 0/2] reentrancy in the common clk framework   Mike Turquette
• [PATCH 1/2] clk: abstract locking out into helper functions   Mike Turquette
• [PATCH 2/2] clk: allow reentrant calls into the clk framework   Mike Turquette
• [Bulk] [PATCH] video: fix invalid free of devm_ allocated data   Tony Prisk
• [PATCH] video: fixed missing iounmap coccinelle errors   Tony Prisk
• [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCH 6/6] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [PATCH 5/5] ARM: dts: AM33XX: Add default pinctrl binding for UART0 device   Hiremath, Vaibhav
• [PATCH 1/5] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM   Hiremath, Vaibhav
• [PATCH 1/3] ARM: shmobile: irqpin: fix handling of spurious interrupts in DT case   Simon Horman
• [PATCH v4 0/6] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v4 2/6] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v4 3/6] usb: otg: twl4030: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v4 4/6] ARM: OMAP: USB: Add phy binding information   Kishon Vijay Abraham I
• [PATCH v4 5/6] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH v4 6/6] usb: musb: omap2430: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v2 01/11] staging: drm/imx: Add LDB support   Shawn Guo
• [PATCHv3 0/6] arm: vt8500: Add support for pinctrl/gpio module   Tony Prisk
• [PATCHv3 1/6] of: Add support for reading a u32 from a multi-value property.   Tony Prisk
• [PATCHv3 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500   Tony Prisk
• [PATCHv3 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500   Tony Prisk
• [PATCHv3 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver   Tony Prisk
• [PATCHv3 5/6] arm: vt8500: Remove gpio devicetree nodes   Tony Prisk
• [PATCHv3 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver   Tony Prisk
• [PATCH] bcm2835: Add Broadcom BCM2835 RNG to the device tree   Lubomir Rintel
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Barry Song
• [PATCH-V2 0/6] ARM: dts: AM33XX: Cleanup and pinctrl binding support   Vaibhav Hiremath
• [PATCH-V2 1/6] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM   Vaibhav Hiremath
• [PATCH-V2 2/6] ARM: dts: AM33XX: Add default pinctrl binding for I2C device   Vaibhav Hiremath
• [PATCH-V2 3/6] ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM   Vaibhav Hiremath
• [PATCH-V2 4/6] ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node   Vaibhav Hiremath
• [PATCH-V2 5/6] ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM   Vaibhav Hiremath
• [PATCH-V2 6/6] ARM: dts: AM33XX: Add default pinctrl binding for UART0 device   Vaibhav Hiremath
• [PATCH v2 02/11] ARM i.MX5: Move IPU clock lookups into device tree   Shawn Guo
• [PATCH v2 03/11] ARM i.MX6q: export imx6q_revision   Shawn Guo
• [PATCH-V2 5/6] ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM   Peter Korsgaard
• [PATCH v2 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Shawn Guo
• [PATCHv7 04/17] pci: infrastructure to add drivers in drivers/pci/host   Thomas Petazzoni
• [PATCH 4/9] ARM: OMAP4+: Remove the un-necessary cache flush from hotplug code   Santosh Shilimkar
• [PATCH v2 10/11] ARM i.MX53: Add LDB device to device tree   Shawn Guo
• [PATCH 1/9] ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures   Santosh Shilimkar
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Thomas Petazzoni
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Santosh Shilimkar
• [PATCH 3/9] ARM: OMAP2+: PM: Remove bogus fiq_[enable/disable] tuple   Santosh Shilimkar
• [PATCH v2 06/11] ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags   Shawn Guo
• [PATCH v2 07/11] ARM i.MX53: fix ldb di divider and selector clocks   Shawn Guo
• [PATCH v2 08/11] ARM i.MX6q: fix ldb di divider and selector clocks   Shawn Guo
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Santosh Shilimkar
• [PATCH v2 11/11] ARM i.MX6q: Add LDB device to device tree   Shawn Guo
• [PATCH V5 0/4] cpufreq: exynos5440: support for cpufreq driver   Amit Daniel Kachhap
• [PATCH V5 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Amit Daniel Kachhap
• [PATCH V5 2/4] cpufreq: exynos: Remove error return even if no soc is found   Amit Daniel Kachhap
• [PATCH V5 3/4] arm: exynos: Enable OPP library support for exynos5440   Amit Daniel Kachhap
• [PATCH V5 4/4] arm: dts: Add cpufreq controller node for Exynos5440 SoC   Amit Daniel Kachhap
• [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration   Christoph Fritz
• [PATCH V5 0/4] cpufreq: exynos5440: support for cpufreq driver   Viresh Kumar
• [PATCH v2 10/11] ARM i.MX53: Add LDB device to device tree   Martin Fuzzey
• [PATCH V5 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Viresh Kumar
• [GIT PULL] at91: soc for 3.10 #2   Nicolas Ferre
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• [PATCH 1/2] clk: abstract locking out into helper functions   Thomas Gleixner
• [PATCH 2/2] clk: allow reentrant calls into the clk framework   Thomas Gleixner
• [PATCH v2] omap2: twl-common: Add default power configuration   Peter Ujfalusi
• [PATCH 0/2] ARM: Remove boilerplate irqchip_init code   Maxime Ripard
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Maxime Ripard
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Maxime Ripard
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Russell King - ARM Linux
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Russell King - ARM Linux
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Johan Hovold
• [PATCH v2 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Philipp Zabel
• [PATCH v2 10/11] ARM i.MX53: Add LDB device to device tree   Philipp Zabel
• [PATCH v2 11/11] ARM i.MX6q: Add LDB device to device tree   Philipp Zabel
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Santosh Shilimkar
• [PATCH v2 01/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH v2 01/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Santosh Shilimkar
• [PATCH] iio: mxs-lradc: Do hardware initialization earlier   Alexandre Belloni
• [PATCH V3 2/3] clk: Fixup errorhandling for clk_set_parent   Rajagopal Venkat
• [PATCH] iio: mxs-lradc: Do hardware initialization earlier   Alexandre Belloni
• [GIT PULL v2] at91: soc for 3.10 #2   Nicolas Ferre
• [PATCH v5 0/2] reentrancy in the common clk framework   Laurent Pinchart
• [GIT PULL] Fix 740t support for 3.10   Will Deacon
• [GIT PULL] imx fixes for 3.9, take 4   Arnd Bergmann
• [GIT PULL] ep93xx-fixes for 3.9-rc5   Arnd Bergmann
• [PATCH] ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass   Rajendra Nayak
• [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Benoit Cousson
• [PATCH v3] pinctrl: mvebu: prevent walking off the end of group array   Jason Cooper
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Alexander Shishkin
• [PATCH 2/5] USB chipidea: add PTW and PTS handling   Alexander Shishkin
• [PATCH] iio: mxs-lradc: Do hardware initialization earlier   Marek Vasut
• [PATCH 1/2] ARM: S3C64XX: Clear DMA flags on channel request   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Slow down mic detection rate for wm5102   Mark Brown
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Felipe Balbi
• [PATCH] iio: mxs-lradc: Do hardware initialization earlier   Alexandre Belloni
• [PATCH] ARM: hw_breakpoint: Enable debug powerdown only if system supports 'has_ossr'   Dietmar Eggemann
• [PATCH] iio: mxs-lradc: Do hardware initialization earlier   Marek Vasut
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Russell King - ARM Linux
• [PATCH 7/9] ARM: OMAP4+: Move the CPU wakeup prepare code under smp_prepare_cpus()   Santosh Shilimkar
• [PATCH] ARM: dts: AM33XX: Corrects typo in interrupt field in SPI node   Benoit Cousson
• [PATCH-V2 0/6] ARM: dts: AM33XX: Cleanup and pinctrl binding support   Benoit Cousson
• [PATCH] clocksource: Fix build in non-OF case   Mark Brown
• [PATCH v3 12/12] clocksource: samsung-time: Add Device Tree support   Mark Brown
• [PATCH] clocksource: Fix build in non-OF case   Arnd Bergmann
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Simon Horman
• [PATCH V5 1/4] cpufreq: exynos: Add cpufreq driver for exynos5440   Viresh Kumar
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH] clocksource: Fix build in non-OF case   Mark Brown
• [PATCH v3 00/12] ARM: samsung-time: Prepare for multiplatform support   Mark Brown
• [PATCH] clocksource: Fix build in non-OF case   Arnd Bergmann
• [PATCH v7 0/5] Add DT support for davinci_mmc driver   Manjunathappa, Prakash
• [PATCH v7 1/5] mmc: davinci: allow driver to work without DMA resource   Manjunathappa, Prakash
• [PATCH] clocksource: Fix build in non-OF case   Mark Brown
• [PATCH v7 2/5] ARM: davinci: mmc: derive version information from device name   Manjunathappa, Prakash
• [PATCH v7 3/5] mmc: davinci_mmc: add DT support   Manjunathappa, Prakash
• [PATCH v7 4/5] ARM: davinci: da850: add mmc DT entries   Manjunathappa, Prakash
• [PATCH v7 5/5] ARM: davinci: da850: override mmc DT node device name   Manjunathappa, Prakash
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags   Alexander Shishkin
• [PATCH v2] irqchip: Add support for ARMv7-M's NVIC   Uwe Kleine-König
• [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Nishanth Menon
• [GIT PULL] Multi Cluster Power Management infrastructure   Lorenzo Pieralisi
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Li Haifeng
• [GIT PULL] Preparatory GIC patches for arm64 support   Catalin Marinas
• [PATCH] clk: exynos5250: Added MUX, DIV and GATE clocks for Gscaler and MFC   Prasanna Kumar
• [GIT PULL] Preparatory GIC patches for arm64 support   Russell King - ARM Linux
• [PATCH V2 3/6] usb: ehci: mv_ehci: remove unused clock   Alan Stern
• [PATCH v2 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Shawn Guo
• [PATCH V5 3/9] ARM: pxa: Provide regulator to pwm-backlight   Marek Vasut
• [PATCH] clocksource: Fix build in non-OF case   Arnd Bergmann
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Rob Herring
• 3.9-rc1 regression in arm dtb build   Stephen Warren
• [PATCH v2 11/11] ARM i.MX6q: Add LDB device to device tree   Shawn Guo
• [PATCH v3] [RFC] arm: use PSCI if available   Nicolas Pitre
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Russell King - ARM Linux
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH v2 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Philipp Zabel
• [PATCHv3 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Mark Rutland
• [PATCH 2/2] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH v3 0/11] LVDS Display Bridge support for i.MX   Philipp Zabel
• [PATCH v3 01/11] ARM i.MX5: Move IPU clock lookups into device tree   Philipp Zabel
• [PATCH v3 02/11] ARM i.MX6q: export imx6q_revision   Philipp Zabel
• [PATCH v3 03/11] ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags   Philipp Zabel
• [PATCH v3 04/11] ARM i.MX53: fix ldb di divider and selector clocks   Philipp Zabel
• [PATCH v3 05/11] ARM i.MX6q: fix ldb di divider and selector clocks   Philipp Zabel
• [PATCH v3 06/11] staging: drm/imx: Add LDB support   Philipp Zabel
• [PATCH v3 07/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1   Philipp Zabel
• [PATCH v3 08/11] ARM i.MX6q: set the LDB serial clock parent to the video PLL   Philipp Zabel
• [PATCH v3 09/11] ARM i.MX53: Add IOMUXC GPR to device tree   Philipp Zabel
• [PATCH v3 10/11] ARM i.MX53: Add LDB device to device tree   Philipp Zabel
• [PATCH v3 11/11] ARM i.MX6q: Add LDB device to device tree   Philipp Zabel
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Arnd Bergmann
• [PATCH v7 0/5] Add DT support for davinci_mmc driver   Arnd Bergmann
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Russell King - ARM Linux
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Dave Anderson
• [PATCH v3] [RFC] arm: use PSCI if available   Nicolas Pitre
• [PATCH v4 1/6] drivers: phy: add generic PHY framework   Stephen Warren
• [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Benoit Cousson
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Arnd Bergmann
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH v3] [RFC] arm: use PSCI if available   Will Deacon
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   Christian Daudt
• [PATCH v3] [RFC] arm: use PSCI if available   Nicolas Pitre
• [PATCH V7 2/2] ARM: bcm281xx: Add timer driver (DT portion)   Christian Daudt
• [PATCH V2 00/12] ux500 suspend-resume   Rickard Andersson
• [PATCH V2 01/12] mfd: db8500: Add IO force function   Rickard Andersson
• [PATCH V2 02/12] ARM: ux500: Add platform suspend ops   Rickard Andersson
• [PATCH V2 03/12] PM / Domains: Add on-off notifiers   Rickard Andersson
• [PATCH V2 04/12] PM / Domains: Lookup domain by name   Rickard Andersson
• [PATCH V2 05/12] ARM: ux500: Create APE generic power domain   Rickard Andersson
• [PATCH V2 06/12] clk: ux500: Add PRCC power management   Rickard Andersson
• [PATCH V2 07/12] ARM: ux500: Create u8500-clk device   Rickard Andersson
• [PATCH V2 08/12] ARM: ux500: Add ApSleep state to suspend   Rickard Andersson
• [PATCH V2 09/12] drivers: bus: ux500: Add ICN driver   Rickard Andersson
• [PATCH V2 10/12] ARM: ux500: Create ICN device   Rickard Andersson
• [PATCH V2 11/12] misc: ux500: Add TPIU driver   Rickard Andersson
• [PATCH V2 12/12] ARM: ux500: Create TPIU device   Rickard Andersson
• [PATCH iv2] ARM: kirkwood: fix a compilation warning   Jean-Francois Moine
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Nicolas Ferre
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH 0/2] pinctrl support for ab8500-usb   Fabio Baltieri
• [PATCH 1/2] ARM: ux500: remove redundant DB8500_PIN_SLEEP definition   Fabio Baltieri
• [PATCH 2/2] ARM: ux500: 8500: add ab8500-musb pinctrl support   Fabio Baltieri
• [GIT PULL] Versatile Express poweroff/restart code to drivers/   Catalin Marinas
• [PATCH] ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass   Mike Turquette
• [PATCH v6 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Philipp Zabel
• [PATCH v6 1/8] dt: describe base reset signal binding   Philipp Zabel
• [PATCH v6 2/8] reset: Add reset controller API   Philipp Zabel
• [PATCH v6 3/8] reset: Add driver for gpio-controlled reset pins   Philipp Zabel
• [PATCH v6 4/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)   Philipp Zabel
• [PATCH v6 5/8] ARM i.MX6q: Link system reset controller (SRC) to IPU in DT   Philipp Zabel
• [PATCH v6 6/8] staging: drm/imx: Use SRC to reset IPU   Philipp Zabel
• [PATCH v6 7/8] ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53   Philipp Zabel
• [PATCH v6 8/8] ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree   Philipp Zabel
• [PATCH 1/1] ARM: kirkwood: Fix chip-delay for GoFlex Net   Jason Cooper
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Russell King - ARM Linux
• Zynq core changes v3   Michal Simek
• [PATCH v3 01/12] arm: zynq: Use standard timer binding   Michal Simek
• [PATCH v3 02/12] arm: zynq: Move timer to clocksource interface   Michal Simek
• [PATCH v3 03/12] arm: zynq: Do not use xilinx specific function names   Michal Simek
• [PATCH v3 04/12] arm: zynq: Move timer to generic location   Michal Simek
• [PATCH v3 05/12] arm: zynq: Load scu baseaddress at run time   Michal Simek
• [PATCH v3 06/12] arm: zynq: Move slcr initialization to separate file   Michal Simek
• [PATCH v3 07/12] arm: zynq: Add support for system reset   Michal Simek
• [PATCH v3 08/12] arm: zynq: Add support for pmu   Michal Simek
• [PATCH v3 09/12] arm: zynq: Add smp_twd timer   Michal Simek
• [PATCH v3 10/12] arm: zynq: Add smp support   Michal Simek
• [PATCH v3 11/12] arm: zynq: Add hotplug support   Michal Simek
• [PATCH v3 12/12] arm: zynq: Get rid of xilinx function prefix   Michal Simek
• [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration   Tony Lindgren
• [PATCH for 3.9-rc] arm: mvebu: Use local interrupt only for the timer 0   Jason Cooper
• [PATCH] ARM: Kirkwood: fix unused mvsdio gpio pins   Jason Cooper
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Jason Cooper
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Kevin Hilman
• [PATCH] arm: prima2: export sirfsoc_reset_device as the common API of drivers   Arnd Bergmann
• [PATCHv3 1/4] arm: orion5x: fix orion5x.dtsi gpio parameters   Jason Cooper
• [PATCHv3 4/4] arm: orion5x: correct IRQ used in dtsi for mv_cesa   Jason Cooper
• [PATCH] arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.   Jason Cooper
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   John Stultz
• [PATCH REPOST 2/7] kbuild: fixdep: support concatenated dep files   Stephen Warren
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   John Stultz
• [PATCH] ARM: perf: fix group validation when using enable_on_exec   Will Deacon
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Russell King - ARM Linux
• [GIT PULL] ARM: mvebu: fixes for v3.9 (round 2)   Jason Cooper
• [PATCH] ARM: tegra: add clocks property to AC'97 sound nodes   Stephen Warren
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Douglas Gilbert
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Maxime Ripard
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Maxime Ripard
• [PATCH v4 0/6] Generic PHY Framework   David Miller
• [PATCHv3] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Jason Cooper
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Rob Herring
• [PATCH] ARM: tegra: add clocks property to AC'97 sound nodes   Stephen Warren
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Russell King - ARM Linux
• [PATCH v3 1/7] bus: introduce an Marvell EBU MBus driver   Jason Cooper
• [PATCH] ARM: tegra: keep power on to SD slot on Dalmore   Stephen Warren
• [PATCH V7 1/2] ARM: bcm281xx: Add timer driver (driver portion)   Arnd Bergmann
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• 3.9-rc1 regression in arm dtb build   Olof Johansson
• [PATCHv3] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT   Arnaud Ebalard
• [PATCHv3 03/10] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Sebastian Hesselbarth
• [PATCH v3] ARM: add support for context tracking subsystem   Kevin Hilman
• [PATCHv2 0/2] ARM: Remove boilerplate irqchip_init code   Maxime Ripard
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Maxime Ripard
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Maxime Ripard
• [PATCH v6 0/2] reentrancy in the common clk framework   Mike Turquette
• [PATCH 1/2] clk: abstract locking out into helper functions   Mike Turquette
• [PATCH 2/2] clk: allow reentrant calls into the clk framework   Mike Turquette
• [PATCH 1/1] video: fbomn: fix type VESA_DMT_VSYNC_HIGH   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Russell King - ARM Linux
• [PATCH] usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused   Arnd Bergmann
• [PATCH] usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused   Arnd Bergmann
• [PATCH] usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused   Tony Prisk
• [PATCH] ARM: remove last use of CONFIG_CPU_ARM710   Paul Bolle
• [PATCH v3 0/7] USB EHCI multiplatform series again   Arnd Bergmann
• [PATCH v3 1/7] USB: EHCI: make ehci-orion a separate driver   Arnd Bergmann
• [PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver   Arnd Bergmann
• [PATCH v3 3/7] USB: EHCI: make ehci-s5p a separate driver   Arnd Bergmann
• [PATCH v3 4/7] USB: EHCI: export ehci_shutdown   Arnd Bergmann
• [PATCH v3 5/7] USB: EHCI: make ehci-atmel a separate driver   Arnd Bergmann
• [PATCH v3 6/7] USB: EHCI: make ehci-msm a separate driver   Arnd Bergmann
• [PATCH v3 7/7] USB: OHCI: avoid conflicting platform drivers   Arnd Bergmann
• [PATCH v3] ARM: add support for context tracking subsystem   Kevin Hilman
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Mike Turquette
• [PATCH v2] iio: mxs-lradc: Do hardware initialization earlier   Alexandre Belloni
• [GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10   Tony Lindgren
• [PATCH v6 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Arnd Bergmann
• [PATCH 1/1] clk: Add notifier support in clk_prepare/clk_unprepare   Stephen Warren
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Neil Greatorex
• [PATCH v3 00/12] ARM: samsung-time: Prepare for multiplatform support   Tomasz Figa
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Neil Greatorex
• [PATCH v2] irqchip: Add support for ARMv7-M's NVIC   Arnd Bergmann
• [PATCH 1/2] ARM: irq: Call irqchit_init if no init_irq function is specified   Rob Herring
• [PATCH v2] iio: mxs-lradc: Do hardware initialization earlier   Marek Vasut
• [GIT PULL] ARM: mvebu: fixes for v3.9 (round 2)   Arnd Bergmann
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Jason Cooper
• [PATCH] ARM: dove: fix Dove cpu type from V7 to PJ4   Jason Cooper
• [PATCH 1/1] video: fbomn: fix type VESA_DMT_VSYNC_HIGH   Jingoo Han
• [PATCH] arm: mvebu: Add GPIO LEDs to Mirabox board   Ryan Press
• [PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver   Viresh Kumar
• [PATCH 2/2] ARM: remove mach .init_irq for irqchip_init users   Simon Horman
• [PATCH] ARM: mvebu: Add gpio button to Mirabox board   Ryan Press
• Bug in ks8851.c   Max.Nekludov at us.elster.com
• [PATCH] ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass   Rajendra Nayak
• [PATCH] ARM: tegra: keep power on to SD slot on Dalmore   Laxman Dewangan
• [GIT PULL] Update for Renesas INTC External IRQ pin driver for v3.10   Simon Horman
• [PATCH] irqchip: intc-irqpin: Add support for shared interrupt lines   Simon Horman
• [PATCH] arm: mvebu: Add GPIO LEDs to Mirabox board   Neil Greatorex
• [PATCH] ARM: shmobile: r8a73a4 SoC 64-bit DT support   Magnus Damm
• [PATCH] ARM: shmobile: r8a7790 SoC 64-bit DT support   Magnus Damm
• [PATCH 00/03 v4] ARM: shmobile: r8a73a4 APE6EVM board support   Magnus Damm
• [PATCH 01/03 v3] ARM: shmobile: APE6EVM base support   Magnus Damm
• [PATCH 02/03 v2] ARM: shmobile: APE6EVM PFC support   Magnus Damm
• [PATCH 03/03 v3] ARM: shmobile: APE6EVM LAN9220 support   Magnus Damm
• [PATCH 0/5] cns3xxx multiplatform support   Mac Lin
• [PATCH 1/2] ARM: imx27: Add PWM0 to device tree   Gwenhael Goavec-Merou
• [PATCH 2/2] ARM: apf27dev: add PWM0 support   Gwenhael Goavec-Merou
• [PATCH] ARM: sunxi: cubieboard: Add UART muxing   Maxime Ripard
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Li Haifeng
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Li Haifeng
• [RFC][PATCH 1/3] ARM: shmobile: define PLATFORM_xxx_INFO()   Magnus Damm
• [PATCH v2] ARM: shmobile: Initial r8a7790 Lager board support   Magnus Damm
• [GIT PULL] at91: tiny cleanup for 3.10 #2   Nicolas Ferre
• [PATCH 00/13] mach-mxs header files cleanup   Shawn Guo
• [PATCH 01/13] rtc: stmp3xxx: use stmp_reset_block() instead   Shawn Guo
• [PATCH 02/13] iio: mxs-lradc: remove unneeded mach header inclusion   Shawn Guo
• [PATCH 03/13] ASoC: mxs-saif: remove mach header inclusion   Shawn Guo
• [PATCH 04/13] ARM: mxs: remove empty hardware.h   Shawn Guo
• [PATCH 05/13] ARM: mxs: get reset address from device tree   Shawn Guo
• [PATCH 06/13] ARM: mxs: remove system.c   Shawn Guo
• [PATCH 07/13] ARM: mxs: get ocotp base address from device tree   Shawn Guo
• [PATCH 08/13] ARM: mxs: use debug_ll_io_init for low-level debug   Shawn Guo
• [PATCH 09/13] ARM: mxs: remove mm.c   Shawn Guo
• [PATCH 10/13] ARM: mxs: move mxs_get_ocotp() into mach-mxs.c   Shawn Guo
• [PATCH 11/13] ARM: mxs: remove common.h   Shawn Guo
• [PATCH 12/13] ARM: mxs: merge imx23 and imx28 into one machine_desc   Shawn Guo
• [PATCH 13/13] ARM: mxs: remove unused headers   Shawn Guo
• [PATCH 0/5] cns3xxx multiplatform support   Imre Kaloz
• [PATCH 0/3] ARM: mxs: support multiplatform build   Shawn Guo
• [PATCH 1/3] ARM: mxs: call mxs_pm_init() as a machine_desc hook   Shawn Guo
• [PATCH 2/3] ARM: mxs: rename debug-macro.S for multiplatform build   Shawn Guo
• [PATCH 3/3] ARM: mxs: enable multiplatform build   Shawn Guo
• [PATCH 0/2] fix cns3xxx booting issue   Mac Lin
• [PATCH] ARM: at91: dts: add adc resolution stuff   ludovic.desroches at atmel.com
• [PATCH 0/2] fix cns3xxx booting issue   Mac Lin
• [PATCH 1/2] ARM: cns3xxx: remove unused virtual address and iotable defines   Mac Lin
• [PATCH 2/2] ARM: cns3xxx: fix mapping of private memory region   Mac Lin
• [PATCHv2 00/10] ARM: sunxi: Architecture cleanups and rework   Maxime Ripard
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   ning.n.jiang at gmail.com
• [PATCH 02/13] iio: mxs-lradc: remove unneeded mach header inclusion   Jonathan Cameron
• [PATCH v2] iio: mxs-lradc: Do hardware initialization earlier   Jonathan Cameron
• [PATCH 1/4] Device tree entry for Freescale TDM controller   Singh Sandeep-B37400
• [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration   Christoph Fritz
• [PATCH v4] ARM: dove: add more hardware description in the DT   Jean-Francois Moine
• [PATCH] ARM: at91: dts: add adc resolution stuff   Jonathan Cameron
• [PATCH v6 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Pavel Machek
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 2/9] ARM: shmobile: pm: fix init sections   Daniel Lezcano
• [PATCH 3/9] ARM: shmobile: cpuidle: remove useless WFI function   Daniel Lezcano
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Daniel Lezcano
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Daniel Lezcano
• [PATCH 6/9] ARM: tegra: cpuidle: remove useless initialization   Daniel Lezcano
• [PATCH 7/9] ARM: davinci: cpuidle: fix wrong enter function   Daniel Lezcano
• [PATCH 8/9] intel: cpuidle: remove stop/start critical timings   Daniel Lezcano
• [PATCH 9/9] ARM: omap3: cpuidle: enable time keeping   Daniel Lezcano
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Santosh Shilimkar
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Daniel Lezcano
• [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration   Christoph Fritz
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Santosh Shilimkar
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH v3 0/11] LVDS Display Bridge support for i.MX   Shawn Guo
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Daniel Lezcano
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Santosh Shilimkar
• [PATCH 9/9] ARM: omap3: cpuidle: enable time keeping   Santosh Shilimkar
• [PATCH 7/9] ARM: davinci: cpuidle: fix wrong enter function   Santosh Shilimkar
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Santosh Shilimkar
• [PATCH v3 0/11] LVDS Display Bridge support for i.MX   Shawn Guo
• [PATCH] ARM: davinci: remove test for undefined Kconfig macro   Paul Bolle
• [PATCH] arm: prima2: export sirfsoc_reset_device as the common API of drivers   Barry Song
• [PATCH 1/9] ARM: cpuidle: remove useless declaration   Daniel Lezcano
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Amit Kucheria
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Santosh Shilimkar
• [PATCH v2 2/2] ARM: ux500: 8500: add ab8500-musb pinctrl support   Fabio Baltieri
• [PATCH] ARM: davinci: remove test for undefined Kconfig macro   Paul Bolle
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Amit Kucheria
• [PATCH 0/3] gpio: remove GENERIC_GPIO completely   Alexandre Courbot
• [PATCH 1/3] Convert selectors of GENERIC_GPIO to GPIOLIB   Alexandre Courbot
• [PATCH 2/3] Remove GENERIC_GPIO config option   Alexandre Courbot
• [PATCH] ARM: Fix typo "CONFIG_LPAE" twice   Paul Bolle
• Fw: Bug in ks8851.c   Max.Nekludov at us.elster.com
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH v3] [RFC] arm: use PSCI if available   Rob Herring
• [PATCH] usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused   Alan Stern
• [PATCH] usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused   Alan Stern
• Fw: Bug in ks8851.c   Denis Kirjanov
• [RFC] dmaengine: omap-dma: Start DMA without delay   Peter Ujfalusi
• [RFC] dmaengine: omap-dma: Start DMA without delay   Peter Meerwald
• [PATCH] ARM: at91: dts: add adc resolution stuff   Nicolas Ferre
• [PATCH v3] [RFC] arm: use PSCI if available   Stefano Stabellini
• [PATCH-V2 0/6] ARM: dts: AM33XX: Cleanup and pinctrl binding support   Hiremath, Vaibhav
• [PATCH v2 0/3] iio: at91_adc: add lowres, sleep and sample&hold time missing support   ludovic.desroches at atmel.com
• [PATCH 1/3] iio: at91_adc: add low and high res support   ludovic.desroches at atmel.com
• [PATCH 2/3] iio: at91_adc: add sleep mode support   ludovic.desroches at atmel.com
• [PATCH 3/3] iio: at91_adc: fix missing Sample and Hold time   ludovic.desroches at atmel.com
• [PATCH v2 00/30] Port of KVM to arm64   Christopher Covington
• [GIT PULL] at91: DT changes for 3.10 #2   Nicolas Ferre
• [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization   Santosh Shilimkar
• [PATCH v6 6/8] staging: drm/imx: Use SRC to reset IPU   Greg Kroah-Hartman
• [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration   Tony Lindgren
• [PATCH 1/5] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages   Trent Piepho
• [PATCH 2/5] spi/mxs: Fix chip select control bits in DMA mode   Trent Piepho
• [PATCH 3/5] spi/mxs: Remove full duplex check, spi core already does it   Trent Piepho
• [PATCH 4/5] spi/mxs: Remove bogus setting of ssp clk rate field   Trent Piepho
• [PATCH 5/5] spi/mxs: Fix multiple slave bug and don't set clock for each xfer   Trent Piepho
• [PATCH v2 0/2] ARM: imx35 clock bugfixes   Markus Pargmann
• [PATCH v2 1/2] ARM: clk-imx35: Bugfix iomux clock   Markus Pargmann
• [PATCH v2 2/2] ARM: imx35 Bugfix admux clock   Markus Pargmann
• [PATCH] ARM: Fix typo "CONFIG_SAMSUNG_DEV_RTC"   Paul Bolle
• [PATCH 0/3] gpio: remove GENERIC_GPIO completely   Alex Courbot
• Fw: Bug in ks8851.c   Max.Nekludov at us.elster.com
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Jason Cooper
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Nicolas Ferre
• How to facilitate the cpuidle drivers to go to the same direction (Was: Re: [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization)   Daniel Lezcano
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Johan Hovold
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Alexander Shishkin
• [PATCH] rtc: rtc-at91rm9200: use a variable for storing IMR   Johan Hovold
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Stephen Warren
• [RFC 1/5] rtc-at91rm9200: add configuration support   Johan Hovold
• [RFC 2/5] rtc-at91rm9200: add device-tree support   Johan Hovold
• [PATCH v4 0/6] support other fsl SoCs with usbmisc + small fixes   Greg KH
• [PATCH v3 0/7] V4L2 driver for Exynos4x12 Imaging Subsystem   Sylwester Nawrocki
• [PATCH v3 1/7] exynos4-is: Add Exynos4x12 FIMC-IS driver   Sylwester Nawrocki
• [PATCH v3 2/7] exynos4-is: Add FIMC-IS ISP I2C bus driver   Sylwester Nawrocki
• [PATCH v3 3/7] exynos4-is: Add FIMC-IS parameter region definitions   Sylwester Nawrocki
• [PATCH v3 4/7] exynos4-is: Add common FIMC-IS image sensor driver   Sylwester Nawrocki
• [PATCH v3 5/7] exynos4-is: Add Exynos4x12 FIMC-IS device tree binding documentation   Sylwester Nawrocki
• [PATCH v3 6/7] exynos4-is: Add FIMC-IS subdevs registration   Sylwester Nawrocki
• [PATCH v3 7/7] exynos4-is: Create media links for the FIMC-IS entities   Sylwester Nawrocki
• [PATCH] ARM: at91: dts: add adc resolution stuff   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] arm/dts: OMAP3: fix pinctrl-single configuration   Christoph Fritz
• [PATCH] ARM: tegra: keep power on to SD slot on Dalmore   Stephen Warren
• [PATCH] ARM: tegra: keep power on to SD slot on Dalmore   Stephen Warren
• [RFC 5/5] rtc-at91rm9200: add support for at91sam9x5   Douglas Gilbert
• [PATCH v4 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Stefano Stabellini
• [PATCH] ARM: mvebu: Add gpio button to Mirabox board   Ezequiel Garcia
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Stephen Warren
• 3.9-rc1 regression in arm dtb build   Stephen Warren
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Andrew Lunn
• [PATCH 0/2] ARM: OMAP2+: AM33xx: Add sysconf info to wdt1 hwmod data   Vaibhav Hiremath
• [PATCH 1/2] ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry   Vaibhav Hiremath
• [PATCH 2/2] ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk   Vaibhav Hiremath
• [PATCH v4 1/2] arm: introduce psci_smp_ops   Nicolas Pitre
• [PATCH] ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass   Mike Turquette
• [PATCH] ARM: mvebu: Add gpio button to Mirabox board   Ryan Press
• [RFC] dmaengine: omap-dma: Start DMA without delay   Russell King - ARM Linux
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Nicolas Pitre
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Stefano Stabellini
• [PATCH v4 1/2] arm: introduce psci_smp_ops   Rob Herring
• [PATCH v3 1/7] USB: EHCI: make ehci-orion a separate driver   Alan Stern
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Ryan Press
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Nicolas Pitre
• [PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver   Alan Stern
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Jason Cooper
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Nicolas Pitre
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Stefano Stabellini
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Ryan Press
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Stefano Stabellini
• [PATCH] ARM: mvebu: Add gpio button to Mirabox board   Ezequiel Garcia
• [PATCH] arm: mvebu: Add GPIO LEDs to Mirabox board   Ezequiel Garcia
• [PATCH 0/4] mv643xx_eth device tree bindings   Florian Fainelli
• [PATCH 1/4] mv643xx_eth: add Device Tree bindings   Florian Fainelli
• [PATCH 2/4] ARM: kirkwood: add device node entries for the gigabit interfaces   Florian Fainelli
• [PATCH 3/4] ARM: orion5x: add gigabit ethernet device tree node   Florian Fainelli
• [PATCH 4/4] ARM: dove: add gigabit device tree nodes to dove.dtsi   Florian Fainelli
• [PATCH 1/4] mv643xx_eth: add Device Tree bindings   Florian Fainelli
• [PATCH] clocksource: Fix build in non-OF case   Mark Brown
• [PATCH 1/1] video: fbomn: fix type VESA_DMT_VSYNC_HIGH   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Stephen Boyd
• [PATCH v2 00/30] Port of KVM to arm64   Marc Zyngier
• [PATCH 1/2] video: ssd1307fb: Add support for SSD1306 OLED controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] video: vt8500 patches for 3.10   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: cfa10036: add one wire bitbanging to the cfa10049   Alexandre Belloni
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• [PATCH 2/4] ARM: kirkwood: add device node entries for the gigabit interfaces   Jason Cooper
• RFC: right way to conditional-ize some macros for LTO   Tim Bird
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Simon Guinot
• [PATCH 2/4] ARM: kirkwood: add device node entries for the gigabit interfaces   Florian Fainelli
• PCI support for IMX6   Pavel Machek
• [PATCH 1/1] ARM: boot/dts/Makefile: drop '\'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] arm: prefer PSCI for SMP bringup   Rob Herring
• [PATCH 1/2] video: ssd1307fb: Add support for SSD1306 OLED controller   Maxime Ripard
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Ezequiel Garcia
• 3.9-rc1 regression in arm dtb build   Olof Johansson
• [PATCH v3 3/7] USB: EHCI: make ehci-s5p a separate driver   Alan Stern
• Bug in ks8851.c   David Miller
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Jason Cooper
• [PATCH v3 4/7] USB: EHCI: export ehci_shutdown   Alan Stern
• [PATCH v3 5/7] USB: EHCI: make ehci-atmel a separate driver   Alan Stern
• [PATCH v3 6/7] USB: EHCI: make ehci-msm a separate driver   Alan Stern
• [PATCH v3 7/7] USB: OHCI: avoid conflicting platform drivers   Alan Stern
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Dave Anderson
• [PATCH] ARM: msm: rename two Kconfig macros   Paul Bolle
• [PATCH 1/1] ARM: boot/dts/Makefile: drop '\'   Stephen Warren
• 3.9-rc1 regression in arm dtb build   Pavel Machek
• RFC v2: Zynq Clock Controller   Sören Brinkmann
• [PATCH] ARM: S3C64XX: remove obsolete Makefile line   Paul Bolle
• [PATCH 1/2] ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>   Stephen Warren
• [PATCH 2/2] ARM: tegra: convert to multi-platform   Stephen Warren
• [PATCH v3 4/7] USB: EHCI: export ehci_shutdown   Geoff Levand
• HEADS UP! Tegra single zImage conversion landing shortly   Stephen Warren
• [PATCH v3 4/7] USB: EHCI: export ehci_shutdown   Alan Stern
• [PATCH 5/9] ARM: tegra2: cpuidle: change driver initialization   Joseph Lo
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Ryan Press
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Chris Moore
• [PATCH v3 5/7] USB: EHCI: make ehci-atmel a separate driver   Nicolas Ferre
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Christoph Fritz
• [PATCH] video: fb: vt8500: Convert framebuffer drivers to standardized binding   Tony Prisk
• [PATCH] ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"   Paul Bolle
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Ning Jiang
• [PATCH 00/21] Various fixes and extensions to Exynos4 clock driver   Thomas Abraham
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Russell King - ARM Linux
• [PATCH 1/2] ARM: imx27: Add PWM0 to device tree   Sascha Hauer
• [GIT PULL] Reset controller API   Philipp Zabel
• [PATCH v3 0/11] LVDS Display Bridge support for i.MX   Philipp Zabel
• [PATCH 00/21] Various fixes and extensions to Exynos4 clock driver   Tomasz Figa
• PCI support for IMX6   Pavel Machek
• [PATCH v3 1/7] USB: EHCI: make ehci-orion a separate driver   Arnd Bergmann
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Ning Jiang
• [PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver   Arnd Bergmann
• PCI support for IMX6   Dirk Behme
• [PATCH v3 3/7] USB: EHCI: make ehci-s5p a separate driver   Arnd Bergmann
• [PATCH v3 5/7] USB: EHCI: make ehci-atmel a separate driver   Arnd Bergmann
• [PATCH v3 6/7] USB: EHCI: make ehci-msm a separate driver   Arnd Bergmann
• [Crash-utility] Throw read error on vmcore produced by ARM soc.   Li Haifeng
• [PATCH v3 7/7] USB: OHCI: avoid conflicting platform drivers   Arnd Bergmann
• [PATCH v4 0/6] USB EHCI multiplatform conversion   Arnd Bergmann
• [PATCH v4 1/6] USB: EHCI: make ehci-orion a separate driver   Arnd Bergmann
• [PATCH v4 2/6] USB: EHCI: make ehci-spear a separate driver   Arnd Bergmann
• [PATCH v4 3/6] USB: EHCI: make ehci-s5p a separate driver   Arnd Bergmann
• [PATCH v4 4/6] USB: EHCI: make ehci-atmel a separate driver   Arnd Bergmann
• [PATCH v4 5/6] USB: EHCI: make ehci-msm a separate driver   Arnd Bergmann
• [PATCH] Fix IXP4xx coherent allocations   Krzysztof Halasa
• [RFC][BUG] arm/dts: OMAP3: set #interrupt-cells to two   Javier Martinez Canillas
• [PATCH] Fix IXP4xx coherent allocations   Russell King - ARM Linux
• [PATCH v4 6/6] USB: OHCI: avoid conflicting platform drivers   Arnd Bergmann
• [PATCH 1/2] ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>   Arnd Bergmann
• [PATCH 2/2] ARM: tegra: convert to multi-platform   Arnd Bergmann
• [PATCH] Fix IXP4xx coherent allocations   Krzysztof Halasa
• [PATCH] ARM: kirkwood: DT board setup for CloudBox   Jason Cooper
• [PATCH] Fix IXP4xx coherent allocations   Russell King - ARM Linux
• PCI support for IMX6   Fabio Estevam
• [PATCH] RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel   Pavel Machek
• [PATCH] RX-51: Register twl4030-madc device   Pavel Machek
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Pavel Machek
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Jason Cooper
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Jason Cooper
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Ryan Press
• [BUG] mod/file2alias: build error in devicetable-offsets.c [was: asm/types.h Header file wont get generated while building uImage ?]   Andreas Schwab
• [PATCH 0/2] fix cns3xxx booting issue   Anton Vorontsov
• [PATCH] arm: mvebu: Fix the memory size on the Mirabox   Jason Cooper
• [GIT PULL] ARM: cns3xxx: v3.9-rc1_cns3xxx_fixes   Anton Vorontsov
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Jason Cooper
• [PATCH] ARM: mvebu: Add button on Armada 370 Reference Design board   Jason Cooper
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Neil Greatorex
• [PATCH 2/2] ARM: Orion: add dbg_show function to gpio-orion driver   Jason Cooper
• [PATCH] ARM: kirkwood: make use of DT mvsdio on guruplug board   Jason Cooper
• [PATCH] ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig   Jason Cooper
• [PATCH v2 2/2] ARM: Orion: add dbg_show function to gpio-orion driver   Jason Cooper
• [PATCH] ARM: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE   Aaro Koskinen
• [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver   Jason Cooper
• [PATCH v3 7/7] arm: plat-orion: remove addr-map code   Jason Cooper
• [PATCH 0/5] video: vt8500 patches for 3.10   Tony Prisk
• [PATCH v3] ARM: dove: add more hardware description in the DT   Jason Cooper
• omap cpufreq driver in multi-platform kernels   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: standardize integration for AES & SHA/MD5 IP blocks for 3.10   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: standardize integration for AES & SHA/MD5 IP blocks for 3.9   Paul Walmsley
• [GIT PULL] Versatile Express poweroff/restart code to drivers/   Anton Vorontsov
• [PATCH V2 03/12] PM / Domains: Add on-off notifiers   Rafael J. Wysocki
• [PATCHv3 2/4] arm: orion5x: add ehci bindings to dtsi   Jason Cooper
• [PATCHv3 3/4] arm: orion5x: enable xor for orion5x platform   Jason Cooper
• [PATCH] arm: mvebu: Add GPIO LEDs to Mirabox board   Jason Cooper
• [PATCH v4] ARM: dove: add more hardware description in the DT   Jason Cooper
• [PATCH for 3.10 v2 0/4] thermal: Add Armada 370/XP support   Jason Cooper
• [PATCHv7 00/17] PCIe support for the Armada 370 and Armada XP SoCs   Jason Cooper
• [PATCH 2/8] ARM: OMAP2+: hwmod: Cleanup sidle/mstandby programming   Paul Walmsley
• [PATCH 3/8] ARM: OMAP2+: hwmod: Always have OCP_SYSCONFIG.ENAWAKEUP enabled   Paul Walmsley
• [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver   Paul Walmsley
• [PATCH 6/8] SERIAL: OMAP: Remove the slave idle handling from the driver   Paul Walmsley
• [PATCH 1/8] ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag   Paul Walmsley
• [PATCH 1/2] ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry   Paul Walmsley
• [PATCH 2/2] ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk   Paul Walmsley
• [PATCH 1/8] ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag   Paul Walmsley
• [RFC][PATCH 0/5] Introduce .get_voltage callback into voltdm   Paul Walmsley
• ix2-200 device tree related fixes   Nigel Roberts
• [PATCH 1/2] Fix typo in the definition of rebuild LED pins for ix2-200   Nigel Roberts
• [PATCH 2/2] Fix GE0/GE1 init on ix2-200 as GE0 has no PHY   Nigel Roberts
• [PATCH] arm: omap: RX-51: ARM errata 430973 workaround   Pavel Machek
• How to facilitate the cpuidle drivers to go to the same direction (Was: Re: [PATCH 4/9] ARM: OMAP4: cpuidle: fix wrong driver initialization)   Rafael J. Wysocki
• [PATCH 1/2] Fix typo in the definition of rebuild LED pins for ix2-200   Sergei Shtylyov
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Ning Jiang
• [PATCH] ARM: cfa10036: add one wire bitbanging to the cfa10049   Shawn Guo
• [PATCH] RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH v6 0/8] Reset controller API to reset IP modules on i.MX5 and i.MX6   Shawn Guo
• [PATCH] ARM: imx: do not use regmap_read for ANADIG_DIGPROG   Shawn Guo
• [PATCH] ARM: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE   Mikael Pettersson
• [PATCH v3] mmc: mxcmmc: DT support   Anatolij Gustschin
• [PATCH v3 2/7] USB: EHCI: make ehci-spear a separate driver   Arnd Bergmann
• PCI support for IMX6   Pavel Machek
• ix2-200 device tree related fixes   Jason Cooper
• [PATCH 1/2] Fix typo in the definition of rebuild LED pins for ix2-200   Jason Cooper
• [PATCH 2/2] Fix GE0/GE1 init on ix2-200 as GE0 has no PHY   Jason Cooper
• ix2-200 device tree related fixes   Jason Cooper
• [PATCH 0/3] add devicetree bindings for rtc-m48t86   Alexander Clouter
• [PATCH 1/3] rtc: rtc-m48t86: add devicetree bindings   Alexander Clouter
• [PATCH 2/3] arm: orion5x: fixup ts78xx to be able to use the rtc-m48t86 again.   Alexander Clouter
• [PATCH 3/3] arm: ep93xx: fixup ts72xx to be able to use the rtc-m48t86 again.   Alexander Clouter
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Daniel Lezcano
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Daniel Lezcano
• [RFC][PATCH 1/3] ARM: shmobile: define PLATFORM_xxx_INFO()   Kuninori Morimoto
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Ning Jiang
• [PATCH] ARM: timer: Shutdown clock event device when stopping local timer   Ning Jiang
• [PATCH 0/3 v2] ARM: shmobile: Add SMSC support on Bock-W   Kuninori Morimoto
• [PATCH 1/3 v2] ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()   Kuninori Morimoto
• [PATCH 2/3 v2] ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()   Kuninori Morimoto
• [PATCH 3/3 v2] ARM: shmobile: bockw: add SMSC ethernet support   Kuninori Morimoto