[PATCH v2 04/11] ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
Philipp Zabel
p.zabel at pengutronix.de
Thu Mar 28 05:58:00 EDT 2013
Am Donnerstag, den 28.03.2013, 15:20 +0800 schrieb Shawn Guo:
> On Wed, Mar 27, 2013 at 06:30:38PM +0100, Philipp Zabel wrote:
> > Query silicon revision to determine clock tree and add post
> > dividers for newer revisions.
> >
> > Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> > ---
> > arch/arm/mach-imx/clk-imx6q.c | 30 +++++++++++++++++++++++-------
> > 1 file changed, 23 insertions(+), 7 deletions(-)
> >
> > diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> > index 2f9ff93..fbab4a9 100644
> > --- a/arch/arm/mach-imx/clk-imx6q.c
> > +++ b/arch/arm/mach-imx/clk-imx6q.c
> > @@ -22,6 +22,7 @@
> >
> > #include "clk.h"
> > #include "common.h"
> > +#include "hardware.h"
> >
> > #define CCGR0 0x68
> > #define CCGR1 0x6c
> > @@ -109,29 +110,32 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
> > static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
> > static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
> > static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
> > -static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
> > +static const char *audio_sels[] = { "pll4_test_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
> > static const char *gpu_axi_sels[] = { "axi", "ahb", };
> > static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
> > static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
> > static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
> > static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
> > -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
> > -static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
> > +static const char *ldb_di_sels[] = { "pll5_control3", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
> > +static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_control3", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
> > static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
> > static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
> > static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
> > static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
> > static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
> > static const char *pcie_axi_sels[] = { "axi", "ahb", };
> > -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
> > +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_test_div", };
> > static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
> > static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
> > static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
> > static const char *vdo_axi_sels[] = { "axi", "ahb", };
> > static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
> > -static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
> > +static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_control3",
> > "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
> > - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
> > + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_test_div", };
> > +
> > +static struct clk_div_table test_div_table[] = { { 2, 1 }, { 1, 2 }, { 0, 4 }, { 0, 0 }, };
> > +static struct clk_div_table control3_table[] = { { 0, 1 }, { 1, 2 }, { 3, 4 }, { 0, 0 }, };
>
> Please rewrite the tables in the way how clk_enet_ref_table is written.
> Also, why { 0, 0 } at the end of both tables?
In the loops in _get_table_maxdiv(), _get_table_div(), and
_get_table_val(), in drivers/clk/clk-divider.c the exit condition
is .div == 0, so there needs to be a sentinel with .div = 0 at the end
of each clk_div_table. It's also documented in the kerneldoc comment for
clk_register_divider_table.
I can write that as "{ }", like this:
static struct clk_div_table test_div_table[] = {
{ .val = 2, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 0, .div = 4 },
{ }
};
static struct clk_div_table control3_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 3, .div = 4 },
{ }
};
> > enum mx6q_clks {
> > dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
> > @@ -165,7 +169,7 @@ enum mx6q_clks {
> > pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
> > ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
> > sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
> > - usbphy2_gate, clk_max
> > + usbphy2_gate, pll4_test_div, pll5_test_div, pll5_control3, clk_max
> > };
> >
> > static struct clk *clk[clk_max];
> > @@ -208,6 +212,14 @@ int __init mx6q_clocks_init(void)
> > base = of_iomap(np, 0);
> > WARN_ON(!base);
> >
> > + /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
> > + if (imx6q_revision() == IMX_CHIP_REVISION_1_0) {
> > + test_div_table[1].div = 1;
> > + test_div_table[2].div = 1;
> > + control3_table[1].div = 1;
> > + control3_table[2].div = 1;
> > + };
> > +
> > /* type name parent_name base div_mask */
> > clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
> > clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
> > @@ -260,6 +272,10 @@ int __init mx6q_clocks_init(void)
> > clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
> > clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
> >
> > + clk[pll4_test_div] = clk_register_divider_table(NULL, "pll4_test_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, test_div_table, NULL);
> > + clk[pll5_test_div] = clk_register_divider_table(NULL, "pll5_test_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, test_div_table, NULL);
> > + clk[pll5_control3] = clk_register_divider_table(NULL, "pll5_control3", "pll5_test_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, control3_table, NULL);
> > +
>
> I'm wondering how the dividers are named. Why "test" and "control3"?
Because I didn't realize that the names were fixed in the final
documentation. I'll rename pll[45]_test_div to pll[45]_post_div.
pll5_control3 should be renamed to pll5_video_div, I guess.
This is documented in chapter 18.7 CCM Analog Memory Map/Register
Definition of the i.MX 6Dual/6Quad Applications Processor Reference
Manual Rev. 0.
> Also, shouldn't the last argument be &imx_ccm_lock rather than NULL?
Yes, I'll fix that.
regards
Philipp
More information about the linux-arm-kernel
mailing list