[PATCH V3 12/18] ARM: OMAP2+: Add additional GPMC timing parameters
Jon Hunter
jon-hunter at ti.com
Mon Mar 18 10:32:50 EDT 2013
On 03/18/2013 09:07 AM, Rob Herring wrote:
> On 03/15/2013 10:21 AM, Jon Hunter wrote:
>> Some of the GPMC timings parameters are currently missing from the GPMC
>> device-tree binding. Add these parameters to the binding documentation
>> as well as code to read them.
>>
>> The existing code in gpmc_read_timings_dt() is checking the value of
>> of_property_read_u32() and only is successful storing the value read
>> in the gpmc_timings structure. Checking the return value in this case
>> is not necessary and we can simply read the value, if present, and
>> store directly in the gpmc_timings structure. Therefore, simplify the
>> code by removing these checks.
>>
>> The comment in the gpmc_read_timings_dt() function, "only for OMAP3430"
>> is also incorrect as it is applicable to all OMAP3+ devices. So correct
>> this too.
>>
>> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
>> ---
>> Documentation/devicetree/bindings/bus/ti-gpmc.txt | 25 +++++-
>> arch/arm/mach-omap2/gpmc.c | 93 ++++++++++-----------
>> 2 files changed, 66 insertions(+), 52 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
>> index 6fde1cf..a63bd93 100644
>> --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
>> +++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
>> @@ -56,10 +56,27 @@ Timing properties for child nodes. All are optional and default to 0.
>> - gpmc,oe-off: Deassertion time
>>
>> Access time and cycle time timings corresponding to GPMC_CONFIG5:
>> - - gpmc,page-burst-access: Multiple access word delay
>> - - gpmc,access: Start-cycle to first data valid delay
>> - - gpmc,rd-cycle: Total read cycle time
>> - - gpmc,wr-cycle: Total write cycle time
>> + - gpmc,page-burst-access: Multiple access word delay
>> + - gpmc,access: Start-cycle to first data valid delay
>> + - gpmc,rd-cycle: Total read cycle time
>> + - gpmc,wr-cycle: Total write cycle time
>> + - gpmc,bus-turnaround: Turn-around time between successive accesses
>> + - gpmc,cycle2cycle-delay: Delay between chip-select pulses
>> + - gpmc,clk-activation: GPMC clock activation time
>> + - gpmc,wait-monitoring: Start of wait monitoring with regard to valid
>> + data
>
> What units are these in? If in nanoseconds, can you append "-ns"
These are cycles. I can update the comment to reflect that.
>> +
>> +Boolean timing parameters. If property is present parameter enabled and
>> +disabled if omitted:
>> + - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock
>> + - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock
>> + - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive
>> + accesses to a different CS
>> + - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive
>> + accesses to the same CS
>> + - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock
>> + - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock
>> + - gpmc,time-para-granularity: Multiply all access times by 2
>>
>> The following are only applicable to OMAP3+ and AM335x:
>> - gpmc,wr-access
>> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
>> index 85b1a35..c928a8c 100644
>> --- a/arch/arm/mach-omap2/gpmc.c
>> +++ b/arch/arm/mach-omap2/gpmc.c
>> @@ -1274,67 +1274,64 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
>> static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
>> struct gpmc_timings *gpmc_t)
>> {
>> - u32 val;
>> -
>> memset(gpmc_t, 0, sizeof(*gpmc_t));
>>
>> /* minimum clock period for syncronous mode */
>> - if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
>> - gpmc_t->sync_clk = val;
>> + of_property_read_u32(np, "gpmc,sync-clk", &gpmc_t->sync_clk);
>>
>> /* chip select timtings */
>> - if (!of_property_read_u32(np, "gpmc,cs-on", &val))
>> - gpmc_t->cs_on = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
>> - gpmc_t->cs_rd_off = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
>> - gpmc_t->cs_wr_off = val;
>> + of_property_read_u32(np, "gpmc,cs-on", &gpmc_t->cs_on);
>> + of_property_read_u32(np, "gpmc,cs-rd-off", &gpmc_t->cs_rd_off);
>> + of_property_read_u32(np, "gpmc,cs-wr-off", &gpmc_t->cs_wr_off);
>>
>> /* ADV signal timings */
>> - if (!of_property_read_u32(np, "gpmc,adv-on", &val))
>> - gpmc_t->adv_on = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
>> - gpmc_t->adv_rd_off = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
>> - gpmc_t->adv_wr_off = val;
>> + of_property_read_u32(np, "gpmc,adv-on", &gpmc_t->adv_on);
>> + of_property_read_u32(np, "gpmc,adv-rd-off", &gpmc_t->adv_rd_off);
>> + of_property_read_u32(np, "gpmc,adv-wr-off", &gpmc_t->adv_wr_off);
>>
>> /* WE signal timings */
>> - if (!of_property_read_u32(np, "gpmc,we-on", &val))
>> - gpmc_t->we_on = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,we-off", &val))
>> - gpmc_t->we_off = val;
>> + of_property_read_u32(np, "gpmc,we-on", &gpmc_t->we_on);
>> + of_property_read_u32(np, "gpmc,we-off", &gpmc_t->we_off);
>>
>> /* OE signal timings */
>> - if (!of_property_read_u32(np, "gpmc,oe-on", &val))
>> - gpmc_t->oe_on = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,oe-off", &val))
>> - gpmc_t->oe_off = val;
>> + of_property_read_u32(np, "gpmc,oe-on", &gpmc_t->oe_on);
>> + of_property_read_u32(np, "gpmc,oe-off", &gpmc_t->oe_off);
>>
>> /* access and cycle timings */
>> - if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
>> - gpmc_t->page_burst_access = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,access", &val))
>> - gpmc_t->access = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
>> - gpmc_t->rd_cycle = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
>> - gpmc_t->wr_cycle = val;
>> -
>> - /* only for OMAP3430 */
>> - if (!of_property_read_u32(np, "gpmc,wr-access", &val))
>> - gpmc_t->wr_access = val;
>> -
>> - if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
>> - gpmc_t->wr_data_mux_bus = val;
>> + of_property_read_u32(np, "gpmc,page-burst-access",
>> + &gpmc_t->page_burst_access);
>> + of_property_read_u32(np, "gpmc,access", &gpmc_t->access);
>> + of_property_read_u32(np, "gpmc,rd-cycle", &gpmc_t->rd_cycle);
>> + of_property_read_u32(np, "gpmc,wr-cycle", &gpmc_t->wr_cycle);
>> + of_property_read_u32(np, "gpmc,bus-turnaround",
>> + &gpmc_t->bus_turnaround);
>> + of_property_read_u32(np, "gpmc,cycle2cycle-delay",
>> + &gpmc_t->cycle2cycle_delay);
>> + of_property_read_u32(np, "gpmc,wait-monitoring",
>> + &gpmc_t->wait_monitoring);
>> + of_property_read_u32(np, "gpmc,clk-activation",
>> + &gpmc_t->clk_activation);
>> +
>> + /* only applicable to OMAP3+ */
>> + of_property_read_u32(np, "gpmc,wr-access", &gpmc_t->wr_access);
>> + of_property_read_u32(np, "gpmc,wr-data-mux-bus",
>> + &gpmc_t->wr_data_mux_bus);
>> +
>> + /* bool timing parameters */
>> + if (of_find_property(np, "gpmc,cycle2cycle-diffcsen", NULL))
>> + gpmc_t->bool_timings.cycle2cyclediffcsen = true;
>> + if (of_find_property(np, "gpmc,cycle2cycle-samecsen", NULL))
>> + gpmc_t->bool_timings.cycle2cyclesamecsen = true;
>> + if (of_find_property(np, "gpmc,we-extra-delay", NULL))
>> + gpmc_t->bool_timings.we_extra_delay = true;
>> + if (of_find_property(np, "gpmc,oe-extra-delay", NULL))
>> + gpmc_t->bool_timings.oe_extra_delay = true;
>> + if (of_find_property(np, "gpmc,adv-extra-delay", NULL))
>> + gpmc_t->bool_timings.adv_extra_delay = true;
>> + if (of_find_property(np, "gpmc,cs-extra-delay", NULL))
>> + gpmc_t->bool_timings.cs_extra_delay = true;
>> + if (of_find_property(np, "gpmc,time-para-granularity", NULL))
>> + gpmc_t->bool_timings.time_para_granularity = true;
>
> of_property_read_bool doesn't work for these?
It should work fine, I wasn't aware of that. Will change.
Cheers
Jon
More information about the linux-arm-kernel
mailing list