[PATCHv2] ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT
Arnaud Ebalard
arno at natisbad.org
Tue Mar 19 15:58:22 EDT 2013
Hi,
Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available
here: http://natisbad.org/NAS/). Almost everything is supported via
provided .dts. A board-readynas.c file is nonetheless required for
device not only converted to DT (Gbit controller).
FWIW, the most noticeable lack regarding hardware support is the fan
controller (GMT G762) for which nothing is currently available
upstream.
Changes since v1:
- More specific compatible string in dts
- Moved declaration to keep dts Makefile in alphabetical order
- Removed unneeded mdelay() for USB power on
- Switched to fixed regulator in .dts for USB power on
Signed-off-by: Arnaud Ebalard <arno at natisbad.org>
Tested-By: Arnaud Ebalard <arno at natisbad.org>
---
A previous version of the patch has been tested against 3.8.3 and the
one below against current arm tree (current head of rmk/for-next).
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 180 ++++++++++++++++++++
arch/arm/configs/kirkwood_defconfig | 1 +
arch/arm/mach-kirkwood/Kconfig | 9 +
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dt.c | 4 +
arch/arm/mach-kirkwood/board-readynas.c | 30 ++++
arch/arm/mach-kirkwood/common.h | 6 +
8 files changed, 232 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
create mode 100644 arch/arm/mach-kirkwood/board-readynas.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c62558..125211d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
+ kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
new file mode 100644
index 0000000..3756e5c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -0,0 +1,180 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6282.dtsi"
+
+/ {
+ model = "NETGEAR ReadyNAS Duo v2";
+ compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory { /* 256 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pinctrl-0 = < &pmx_uart0
+ &pmx_button_power
+ &pmx_button_backup
+ &pmx_button_power
+ &pmx_led_power
+ &pmx_led_blue_activity
+ &pmx_led_blue_disk1
+ &pmx_led_blue_disk2
+ &pmx_led_blue_backup >;
+ pinctrl-names = "default";
+
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_button_backup: pmx-button-backup {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ pmx_led_blue_activity: pmx-led-blue-activity {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_blue_disk1: pmx-led-blue-disk1 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ pmx_led_blue_disk2: pmx-led-blue-disk2 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_blue_backup: pmx-led-blue-backup {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ };
+
+ i2c at 11000 {
+ status = "okay";
+
+ rs5c372a: rs5c372a at 32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+ };
+
+ serial at 12000 {
+ status = "okay";
+ };
+
+ nand at 3000000 {
+ status = "okay";
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>;
+ read-only;
+ };
+
+ partition at 180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>;
+ };
+
+ partition at 200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>;
+ };
+
+ partition at 800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x1000000>;
+ };
+
+ partition at 1800000 {
+ label = "jffs2";
+ reg = <0x1800000 0x6800000>;
+ };
+ };
+
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_led {
+ label = "status:blue:power_led";
+ gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */
+ linux,default-trigger = "default-on";
+ };
+ activity_led {
+ label = "status:blue:activity_led";
+ gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */
+ };
+ disk1_led {
+ label = "status:blue:disk1_led";
+ gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */
+ };
+ disk2_led {
+ label = "status:blue:disk2_led";
+ gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */
+ };
+ backup_led {
+ label = "status:blue:backup_led";
+ gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button at 1 {
+ label = "Power Button";
+ linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpio1 15 1>;
+ };
+ button at 2 {
+ label = "Reset Button";
+ linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio0 13 1>;
+ };
+ button at 3 {
+ label = "Backup Button";
+ linux,code = <133>; /* KEY_COPY */
+ gpios = <&gpio1 13 1>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB 3.0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 0>;
+ };
+ };
+};
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 13482ea..511cd7d 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -35,6 +35,7 @@ CONFIG_MACH_NETSPACE_LITE_V2_DT=y
CONFIG_MACH_NETSPACE_MINI_V2_DT=y
CONFIG_MACH_OPENBLOCKS_A6_DT=y
CONFIG_MACH_TOPKICK_DT=y
+CONFIG_MACH_READYNAS_DT=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
CONFIG_MACH_DOCKSTAR=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 7b6a64b..94df386 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -108,6 +108,15 @@ config MACH_TS219_DT
or MV6282. If you have the wrong one, the buttons will not
work.
+config MACH_READYNAS_DT
+ bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ select ARM_APPENDED_DTB
+ select ARM_ATAG_DTB_COMPAT
+ help
+ Say 'Y' here if you want your kernel to support the
+ NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
+
config MACH_DOCKSTAR_DT
bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 4cc4bee..b9108ea 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 2e73e9d..a29f2ee 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -144,6 +144,9 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("usi,topkick"))
usi_topkick_init();
+ if (of_machine_is_compatible("netgear,readynas-duo-v2"))
+ netgear_readynas_init();
+
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
@@ -169,6 +172,7 @@ static const char * const kirkwood_dt_board_compat[] = {
"plathome,openblocks-a6",
"usi,topkick",
"zyxel,nsa310",
+ "netgear,readynas-duo-v2",
NULL
};
diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c
new file mode 100644
index 0000000..47bc25e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-readynas.c
@@ -0,0 +1,30 @@
+/*
+ * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
+ * converted to DT.
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno at natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init netgear_readynas_init(void)
+{
+ kirkwood_ge00_init(&netgear_readynas_ge00_data);
+ kirkwood_pcie_init(KW_PCIE0);
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5ed7056..ed9a4bd 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -147,6 +147,12 @@ void usi_topkick_init(void);
static inline void usi_topkick_init(void) {};
#endif
+#ifdef CONFIG_MACH_READYNAS_DT
+void netgear_readynas_init(void);
+#else
+static inline void netgear_readynas_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
--
1.7.10.4
More information about the linux-arm-kernel
mailing list