[PATCH v2 3/4] ARM: dts: mxs: add enet_out clock to devicetree

Shawn Guo shawn.guo at linaro.org
Mon Mar 18 04:26:24 EDT 2013


From: Wolfram Sang <w.sang at pengutronix.de>

Put the clock to the devicetree, so the driver can take care of it
later. Then, we don't have to do the enabling as a workaround in board
init.

Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
[shawn.guo: add enet_out into imx28.dtsi and overwrite it for m28evk]
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 arch/arm/boot/dts/imx28-m28evk.dts |    2 ++
 arch/arm/boot/dts/imx28.dtsi       |    4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 6ce3d17..3d2e1a4 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -221,6 +221,8 @@
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7ba4966..dc1203d 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -940,8 +940,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f0000 0x4000>;
 			interrupts = <101>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
 			status = "disabled";
 		};
 
-- 
1.7.9.5





More information about the linux-arm-kernel mailing list