[PATCH 2/4] ARM: kirkwood: add device node entries for the gigabit interfaces
Jason Cooper
jason at lakedaemon.net
Fri Mar 29 14:48:52 EDT 2013
On Fri, Mar 29, 2013 at 07:14:37PM +0100, Florian Fainelli wrote:
> This patch modifies kirkwood.dtsi to specify the various gigabit
> interfaces nodes available on kirkwood devices. They are disabled by
> default and should be enabled on a per-board basis. egiga0 and egiga1
> aliases are defined for convenience. The mdio node is also present and
> should be enabled on a per-board basis as well.
>
> Signed-off-by: Florian Fainelli <florian at openwrt.org>
> ---
> arch/arm/boot/dts/kirkwood.dtsi | 46 +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-kirkwood/common.c | 4 ++--
> 2 files changed, 48 insertions(+), 2 deletions(-)
>
...
> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
> index 49792a0..a606f9f 100644
> --- a/arch/arm/mach-kirkwood/common.c
> +++ b/arch/arm/mach-kirkwood/common.c
> @@ -251,8 +251,8 @@ void __init kirkwood_clk_init(void)
> /* clkdev entries, mapping clks to devices */
> orion_clkdev_add(NULL, "orion_spi.0", runit);
> orion_clkdev_add(NULL, "orion_spi.1", runit);
> - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
> - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
> + orion_clkdev_add("0", MV643XX_ETH_NAME ".0", ge0);
> + orion_clkdev_add("1", MV643XX_ETH_NAME ".1", ge1);
Your first patch is going to go through David's tree, and I'd like to
prevent any hard dependency between his tree and arm-soc. Can this
change be pulled out and applied separately? At first glance, it looks
like a fix to match sata and pcie.
thx,
Jason.
More information about the linux-arm-kernel
mailing list