[PATCH v3 03/11] clocksource: sp804: add device tree support

[Rob Herring]

On 03/13/2013 09:42 AM, Pawel Moll wrote:
> On Wed, 2013-03-13 at 14:17 +0000, Rob Herring wrote:
>> How about:
>>
>> 1 irq - TIMINT1
>> 2 irqs w/ same source # - TIMINTC
>> 2 irqs w/ different source # - TIMINT1 and TIMINT2
>>
>> I'm not completely sure if Linux and the irq domain code handles the
>> same interrupt source repeated. It should because that is basically a
>> shared irq line.
>>
>> If we ever see only TIMINT2 connected we can add a property for that,
>> but I think that case is unlikely.
> 
> I was rather thinking about using the "interrupt-names" property and
> naming them explicitly, eg:
> 
> 	interrupt-names = "timint1", "timint2";
> 	interrupts = <1>, <2>;
> 
> 	interrupt-names = "timint1";
> 	interrupts = <1>;
> 
> 	interrupt-names = "timint2";
> 	interrupts = <2>;
> 
> 	interrupt-names = "timintc";
> 	interrupts = <3>;
> 
> But now I see that of_amba_device_create() doesn't do anything about it
> (platform device would use them as resource name so we could use
> platform_get_resource_byname), so I'm not sure any more...

The interrupt-names property should not be required and without it here
you cannot determine the configuration.

Rob