[PATCH] ARM: bcm281xx: Add L2 cache enable code

[Stephen Warren]

On 03/04/2013 07:47 PM, Christian Daudt wrote:
> - Adds a module to provide calls into secure monitor mode
> - Uses this module to make secure monitor calls to enable L2 cache.

> diff --git a/Documentation/devicetree/bindings/misc/smc.txt b/Documentation/devicetree/bindings/misc/smc.txt

> +Example:
> +	smc at 0x3404c000 {
> +		compatible = "bcm,kona-smc";

Both here in this example, and ...

> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi

> +	smc at 0x3404c000 {
> +		compatible = "bcm,kona-smc";

Here in the actual .dts file, you should include the specific ID of the
SoC too, so that if there are Soc-specific bugs, the compatible property
that's required to determine this is present from the start. In other words,

compatible = "bcm,bcm11351-smc", "bcm,kona-smc";

(which SoC ID you use in the example is arbitrary, but it may as well
match the .dts file you're editing in the patch).