[PATCH 43/46] ARM: ux500: Pass regulator platform data using the new format
Lee Jones
lee.jones at linaro.org
Thu Mar 21 11:59:40 EDT 2013
Regulator platform data is now passed though a single structure
as opposed to the old way where four separate struct elements
were required. This patch makes use of the new format.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/mach-ux500/board-mop500.c | 5 +----
include/linux/mfd/abx500/ab8500.h | 11 ++---------
2 files changed, 3 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b034578..b1124bd 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -198,10 +198,7 @@ static struct platform_device snowball_sbnet_dev = {
struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
- .regulator_reg_init = ab8500_regulator_reg_init,
- .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
- .regulator = ab8500_regulators,
- .num_regulator = ARRAY_SIZE(ab8500_regulators),
+ .regulator = &ab8500_regulator_plat_data,
.gpio = &ab8500_gpio_pdata,
.codec = &ab8500_codec_pdata,
};
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 9db0bda..84f4494 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -364,8 +364,7 @@ struct ab8500 {
const int *irq_reg_offset;
};
-struct regulator_reg_init;
-struct regulator_init_data;
+struct ab8500_regulator_platform_data;
struct ab8500_gpio_platform_data;
struct ab8500_codec_platform_data;
struct ab8500_sysctrl_platform_data;
@@ -375,19 +374,13 @@ struct ab8500_sysctrl_platform_data;
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @pm_power_off: Should machine pm power off hook be registered or not
* @init: board-specific initialization after detection of ab8500
- * @num_regulator_reg_init: number of regulator init registers
- * @regulator_reg_init: regulator init registers
- * @num_regulator: number of regulators
* @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
int irq_base;
bool pm_power_off;
void (*init) (struct ab8500 *);
- int num_regulator_reg_init;
- struct ab8500_regulator_reg_init *regulator_reg_init;
- int num_regulator;
- struct regulator_init_data *regulator;
+ struct ab8500_regulator_platform_data *regulator;
struct abx500_gpio_platform_data *gpio;
struct ab8500_codec_platform_data *codec;
struct ab8500_sysctrl_platform_data *sysctrl;
--
1.7.10.4
More information about the linux-arm-kernel
mailing list