[PATCH 42/46] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages

[Lee Jones]

The regulator framework offers a generic regulator_list_voltage_table()
function which can directly look-up a regulator's voltage capabilities
using a table provided through the desc structure. This patch ensures
that information is available.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/regulator/ab8500.c |   19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 13948c8..e82b0ad 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -926,7 +926,7 @@ static struct ab8500_regulator_info
 	 * Variable Voltage Regulators
 	 *   name, min mV, max mV,
 	 *   update bank, reg, mask, enable val
-	 *   volt bank, reg, mask, table, table length
+	 *   volt bank, reg, mask
 	 */
 	[AB8505_LDO_AUX1] = {
 		.desc = {
@@ -1140,8 +1140,6 @@ static struct ab8500_regulator_info
 		.voltage_reg		= 0x57,
 		.voltage_mask		= 0x7,
 		.voltage_shift		= 4,
-		.voltages		= ldo_vaudio_voltages,
-		.voltages_len		= ARRAY_SIZE(ldo_vaudio_voltages),
 	},
 	[AB8505_LDO_ANAMIC1] = {
 		.desc = {
@@ -1223,8 +1221,6 @@ static struct ab8500_regulator_info
 		.voltage_bank		= 0x04,
 		.voltage_reg		= 0x29,
 		.voltage_mask		= 0x7,
-		.voltages		= ldo_vana_voltages,
-		.voltages_len		= ARRAY_SIZE(ldo_vana_voltages),
 	},
 };
 
@@ -1235,7 +1231,7 @@ static struct ab8500_regulator_info
 	 * Variable Voltage Regulators
 	 *   name, min mV, max mV,
 	 *   update bank, reg, mask, enable val
-	 *   volt bank, reg, mask, table, table length
+	 *   volt bank, reg, mask
 	 */
 	[AB9540_LDO_AUX1] = {
 		.desc = {
@@ -1478,7 +1474,7 @@ static struct ab8500_regulator_info
 	 * Variable Voltage Regulators
 	 *   name, min mV, max mV,
 	 *   update bank, reg, mask, enable val
-	 *   volt bank, reg, mask, table, table length
+	 *   volt bank, reg, mask
 	 */
 	[AB8540_LDO_AUX1] = {
 		.desc = {
@@ -1581,6 +1577,7 @@ static struct ab8500_regulator_info
 			.id		= AB8540_LDO_AUX5,
 			.owner		= THIS_MODULE,
 			.n_voltages	= ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
+			.volt_table	= ldo_vaux56_ab8540_voltages,
 		},
 		.load_lp_uA		= 20000,
 		/* values for Vaux5Regu register */
@@ -1594,8 +1591,6 @@ static struct ab8500_regulator_info
 		.voltage_bank		= 0x04,
 		.voltage_reg		= 0x33,
 		.voltage_mask		= 0x3f,
-		.voltages		= ldo_vaux56_ab8540_voltages,
-		.voltages_len		= ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
 	},
 	[AB8540_LDO_AUX6] = {
 		.desc = {
@@ -1605,6 +1600,7 @@ static struct ab8500_regulator_info
 			.id		= AB8540_LDO_AUX6,
 			.owner		= THIS_MODULE,
 			.n_voltages	= ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
+			.volt_table	= ldo_vaux56_ab8540_voltages,
 		},
 		.load_lp_uA		= 20000,
 		/* values for Vaux6Regu register */
@@ -1618,8 +1614,6 @@ static struct ab8500_regulator_info
 		.voltage_bank		= 0x04,
 		.voltage_reg		= 0x36,
 		.voltage_mask		= 0x3f,
-		.voltages		= ldo_vaux56_ab8540_voltages,
-		.voltages_len		= ARRAY_SIZE(ldo_vaux56_ab8540_voltages),
 	},
 	[AB8540_LDO_INTCORE] = {
 		.desc = {
@@ -1732,6 +1726,7 @@ static struct ab8500_regulator_info
 			.id		= AB8540_LDO_DMIC,
 			.owner		= THIS_MODULE,
 			.n_voltages	= ARRAY_SIZE(ldo_vdmic_voltages),
+			.volt_table	= ldo_vdmic_voltages,
 		},
 		.load_lp_uA		= 1000,
 		.update_bank		= 0x03,
@@ -1741,8 +1736,6 @@ static struct ab8500_regulator_info
 		.voltage_bank		= 0x03,
 		.voltage_reg		= 0x83,
 		.voltage_mask		= 0xc0,
-		.voltages		= ldo_vdmic_voltages,
-		.voltages_len		= ARRAY_SIZE(ldo_vdmic_voltages),
 	},
 
 	/*
-- 
1.7.10.4