OMAP baseline test results for v3.9-rc3
Anca Emanuel
anca.emanuel at gmail.com
Mon Mar 18 12:21:24 EDT 2013
You are not planning any resources to solve this ?
You are listing this for a number of months now. It is time to solve them.
On Mon, Mar 18, 2013 at 5:38 PM, Paul Walmsley <paul at pwsan.com> wrote:
>
> Here are some basic OMAP test results for Linux v3.9-rc3.
> Logs and other details at:
>
> http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130314094808/
>
>
> Test summary
> ------------
>
> Build:
> FAIL ( 3/16): am33xx_only, omap1_defconfig_5912osk_only,
> omap2plus_defconfig_2430sdp_only
> Pass (13/16): n800_multi_omap2xxx, n800_only_a, omap1_defconfig,
> omap1_defconfig_1510innovator_only,
> omap2plus_defconfig, omap2plus_defconfig_cpupm,
> omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> rmk_omap3430_ldp_allnoconfig,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_allnoconfig
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 1/11): am335xbone
> Pass (10/11): 2420n800, 2430sdp, 3517evm, 3530es3beagle,
> 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes,
> 5912osk, cmt3517
>
> PM ret, suspend:
> FAIL ( 4/ 6): 2430sdp, 37xxevm, 4430es2panda, 4460pandaes
> Pass ( 2/ 6): 3530es3beagle, 3730beaglexm
>
> PM ret, dynamic idle:
> FAIL ( 4/ 6): 2430sdp, 37xxevm, 4430es2panda, 4460pandaes
> Pass ( 2/ 6): 3530es3beagle, 3730beaglexm
>
> PM off, suspend:
> FAIL ( 3/ 5): 37xxevm, 4430es2panda, 4460pandaes
> Pass ( 2/ 5): 3530es3beagle, 3730beaglexm
>
> PM off, dynamic idle:
> FAIL ( 3/ 5): 37xxevm, 4430es2panda, 4460pandaes
> Pass ( 2/ 5): 3530es3beagle, 3730beaglexm
>
>
> Failing tests: fixed by posted patches
> --------------------------------------
>
> Build:
>
> * omap1_defconfig_5912osk_only: implicit declaration of function 'cpu_is_omap15xx'
> - Fixed by Aaro: http://www.spinics.net/lists/linux-omap/msg87523.html
>
> PM:
>
> * 4460pandaes: CORE, L3INIT didn't enter target state
> - Caused by 17b7e7d33530e2bbd3bdc90f4db09b91cfdde2bb
> (ARM: OMAP4: clock/hwmod data: start to remove some IP block control
> "clocks")
> - Fixed by "ARM: OMAP4: PM: fix PM regression introduced by recent clock
> cleanup"
> - http://www.spinics.net/lists/arm-kernel/msg224419.html
>
> Failing tests: needing investigation
> ------------------------------------
>
> Build:
>
> * am33xx_only, omap2plus_defconfig_2430sdp_only: omap-{smp,hotplug}.c link errors
>
> Boot tests:
>
> * 3517EVM & CM-T3517: boot hangs with NFS root
> - Likely some Kconfig, board file, and PM issues with EMAC
> - Longstanding bug
>
> Boot warnings:
>
> * 2430sdp & 37xxevm: nasty lock warning due to NFS root
> - Cause unknown
> - Breaks most remaining tests
>
> * CM-T3517: L3 in-band error with IPSS during boot
> - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2
> - Longstanding issue; does not occur on the 3517EVM
>
> PM tests:
>
> * 2430sdp: pwrdm state mismatch(dsp_pwrdm) 0 != 3
> - need to doublecheck wakeup dependencies
> - (am assuming it's still there; userspace problems prevent the test
> from running, probably due to the lock warning)
>
> * 2430sdp: power domains not entering retention
> - Cause unknown
> - (am assuming it's still there; userspace problems prevent the test
> from running, probably due to the lock warning)
>
> * 4430es2panda, 4460pandaes: pwrdm state mismatch on CAM, DSS, ABE
>
> * 4460pandaes: pwrdm state mismatch on IVAHD, TESLA
>
> * 4430es2panda: CORE, TESLA, IVAHD, L3INIT didn't enter target state
> - Probably due to lack of reset code for M3, DSP, SL2IF, FSUSB
> per discussion with Tero Kristo
> - Likely dependent on the bootloader version
> - fails with 2012.07-00136-g755de79
>
> * 4460pandaes: chip not entering retention in dynamic idle
> - Presumably 4430es2panda also fails this
> - Suspend-to-RAM enters full chip retention
>
> * 3730 Beagle XM: does not serial wake from off-idle suspend when console
> UART doesn't clock-gate ("debug ignore_loglevel")
> - Cause unknown
> - Not yet part of the automated test suite
> - Re-tested at v3.7; still failing:
> http://www.pwsan.com/omap/transcripts/20121211-3730beaglexm-3.7-pm-offmode-fail-debug.txt
>
> Other:
>
> * 4430es2panda: omap_hwmod: l3_instr: _wait_target_disable failed
> - Unknown cause; could be due to the lack of hierarchical enable/disable
> in hwmod code
> - Jon Hunter reports this does not appear with the same X-loader/bootloader
> on his 4430ES2.3 Panda, so could be ES-level dependent
>
>
> vmlinux object size
> (delta in bytes from test_v3.9-rc2
> (f6161aa153581da4a3867a2d1a7caf4be19b6ec9)):
> text data bss total kernel
> +72 -64 0 +8 n800_multi_omap2xxx
> +56 -64 0 -8 n800_only_a
> +5606576 +359420 +121728 +6087724 omap1_defconfig
> +108 +2592 0 +2700 omap1_defconfig_1510innovator_only
> +640 +2568 0 +3208 omap2plus_defconfig
> +704 +2560 0 +3264 omap2plus_defconfig_cpupm
> +704 +2560 0 +3264 omap2plus_defconfig_no_pm
> +640 +2560 0 +3200 omap2plus_defconfig_omap2_4_only
> +628 +2576 0 +3204 omap2plus_defconfig_omap3_4_only
> -20852 -460 +1732 -19580 rmk_omap3430_ldp_allnoconfig
> +4352 -64 0 +4288 rmk_omap3430_ldp_oldconfig
> -20740 -460 +1620 -19580 rmk_omap4430_sdp_allnoconfig
> +168 -8 0 +160 rmk_omap4430_sdp_oldconfig
>
> omap1_defconfig is building again.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list