[PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver

[Neil Greatorex]

On Sat, 30 Mar 2013, Jason Cooper wrote:

> On Thu, Mar 28, 2013 at 10:27:28PM +0000, Neil Greatorex wrote:
> ...
>> -- >8 --
>> Subject: [PATCH] bus: mvebu-mbus: Restore checking for coherency fabric
>>  hardware
>>
>> The new mvebu-mbus driver was not checking the device tree for
>> coherency fabric hardware and hence was not setting the hw_io_coherency
>> flag in mbus_state. This prevented the mvsdio driver from operating
>> correctly. This patch restores the check.
>
> Neil,
>
> If I could get you to put a Signed-off-by: on this, I'll queue it up so
> folks can test it more easily.
>
> thx,
>
> Jason.
>

Jason,

Thanks. I've included it below.

Cheers,
Neil


Subject: [PATCH] bus: mvebu-mbus: Restore checking for coherency fabric
  hardware

The new mvebu-mbus driver was not checking the device tree for
coherency fabric hardware and hence was not setting the hw_io_coherency
flag in mbus_state. This prevented the mvsdio driver from operating
correctly. This patch restores the check.

Signed-off-by: Neil Greatorex <neil at fatboyfat.co.uk>
---
  drivers/bus/mvebu-mbus.c |    3 +++
  1 file changed, 3 insertions(+)

diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 586d03e..a0250c6 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -858,6 +858,9 @@ int __init mvebu_mbus_init(const char *soc, 
phys_addr_t mbuswins_phys_base,
  		return -ENOMEM;
  	}

+	if (of_find_compatible_node(NULL, NULL, 
"marvell,coherency-fabric"))
+		mbus->hw_io_coherency = 1;
+
  	for (win = 0; win < mbus->soc->num_wins; win++)
  		mvebu_mbus_disable_window(mbus, win);

-- 
1.7.10.4