[PATCH v3 08/11] ARM i.MX6q: set the LDB serial clock parent to the video PLL

[Philipp Zabel]

On i.MX6q revision 1.1 and later, set the video PLL as parent for
the LDB clock branch. On revision 1.0, the video PLL is useless
due to missing dividers, so keep the default parent (mmdc_ch1_axi).

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
Changes since v2:
 - Renamed pll5_control3 to pll5_video_div
---
 arch/arm/mach-imx/clk-imx6q.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 9c6a08e..398d672 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -477,6 +477,11 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 	clk_register_clkdev(clk[arm], NULL, "cpu0");
 
+	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
+		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+	}
+
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
 	 * We can not get the 100MHz from the pll2_pfd0_352m.
-- 
1.8.2.rc2